[U-Boot] [PATCH v2 01/10] arm: ls102xa: Add Freescale LS102xA SoC support
Alison Wang
b18965 at freescale.com
Thu Jul 3 09:24:15 CEST 2014
The QorIQ LS1 family is built on Layerscape architecture,
the industry's first software-aware, core-agnostic networking
architecture to offer unprecedented efficiency and scale.
Freescale LS102xA is a set of SoCs combines two ARM
Cortex-A7 cores that have been optimized for high
reliability and pack the highest level of integration
available for sub-3 W embedded communications processors
with Layerscape architecture and with a comprehensive
enablement model focused on ease of programmability.
Signed-off-by: Alison Wang <alison.wang at freescale.com>
Signed-off-by: Jason Jin <jason.jin at freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
---
Change log:
v2: Add serdes support.
Update DDR frequency and data rate information.
Fix overflow condition error for the timer.
arch/arm/cpu/armv7/ls102xa/Makefile | 12 +
arch/arm/cpu/armv7/ls102xa/clock.c | 131 ++++++
arch/arm/cpu/armv7/ls102xa/cpu.c | 103 +++++
arch/arm/cpu/armv7/ls102xa/fdt.c | 73 ++++
arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c | 119 ++++++
arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h | 12 +
arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c | 41 ++
arch/arm/cpu/armv7/ls102xa/timer.c | 127 ++++++
arch/arm/include/asm/arch-ls102xa/clock.h | 23 ++
arch/arm/include/asm/arch-ls102xa/config.h | 69 ++++
arch/arm/include/asm/arch-ls102xa/fsl_serdes.h | 33 ++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 461 ++++++++++++++++++++++
arch/arm/include/asm/arch-ls102xa/imx-regs.h | 53 +++
arch/arm/include/asm/config.h | 4 +
arch/arm/include/asm/io.h | 8 +-
drivers/watchdog/Makefile | 2 +-
16 files changed, 1269 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/Makefile
create mode 100644 arch/arm/cpu/armv7/ls102xa/clock.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/cpu.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fdt.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/timer.c
create mode 100644 arch/arm/include/asm/arch-ls102xa/clock.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/config.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/imx-regs.h
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
new file mode 100644
index 0000000..d82ce8d
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += timer.o
+
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
diff --git a/arch/arm/cpu/armv7/ls102xa/clock.c b/arch/arm/cpu/armv7/ls102xa/clock.c
new file mode 100644
index 0000000..75bb0e9
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/clock.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <fsl_ifc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
+ struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
+ unsigned int cpu;
+ const u8 core_cplx_pll[6] = {
+ [0] = 0, /* CC1 PPL / 1 */
+ [1] = 0, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 1, /* CC2 PPL / 2 */
+ };
+
+ const u8 core_cplx_pll_div[6] = {
+ [0] = 1, /* CC1 PPL / 1 */
+ [1] = 2, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 2, /* CC2 PPL / 2 */
+ };
+
+ uint i;
+ uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+ sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+ sys_info->freq_ddrbus = sysclk;
+#endif
+
+ sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
+ RCWSR0_SYS_PLL_RAT_SHIFT) & RCWSR0_SYS_PLL_RAT_MASK;
+ sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
+ RCWSR0_MEM_PLL_RAT_SHIFT) & RCWSR0_MEM_PLL_RAT_MASK;
+
+ for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+ ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0x3f;
+ if (ratio[i] > 4)
+ freq_c_pll[i] = sysclk * ratio[i];
+ else
+ freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+ }
+
+ for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+ & 0xf;
+ u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+ sys_info->freq_processor[cpu] =
+ freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+ }
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+#endif
+}
+
+
+int get_clocks(void)
+{
+ struct sys_info sys_info;
+
+ get_sys_info(&sys_info);
+ gd->cpu_clk = sys_info.freq_processor[0];
+ gd->bus_clk = sys_info.freq_systembus;
+ gd->mem_clk = sys_info.freq_ddrbus * 2;
+
+#if defined(CONFIG_FSL_ESDHC)
+ gd->arch.sdhc_clk = gd->bus_clk;
+#endif
+
+ return 0;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+ return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+ return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+ return gd->bus_clk / 2;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_I2C_CLK:
+ return get_bus_freq(0) / 2;
+ case MXC_ESDHC_CLK:
+ return get_bus_freq(0);
+ case MXC_DSPI_CLK:
+ return get_bus_freq(0) / 2;
+ case MXC_UART_CLK:
+ return get_bus_freq(0) / 2;
+ default:
+ printf("Unsupported clock\n");
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
new file mode 100644
index 0000000..45a0405
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <tsec.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char buf1[32], buf2[32];
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int svr, major, minor, ver, i;
+
+ svr = in_be32(&gur->svr);
+ major = SVR_MAJ(svr);
+ minor = SVR_MIN(svr);
+
+ puts("CPU: Freescale LayerScape ");
+
+ ver = SVR_SOC_VER(svr);
+ switch (ver) {
+ case SOC_VER_SLS1020:
+ puts("SLS1020");
+ break;
+ case SOC_VER_LS1020:
+ puts("LS1020");
+ break;
+ case SOC_VER_LS1021:
+ puts("LS1021");
+ break;
+ case SOC_VER_LS1022:
+ puts("LS1022");
+ break;
+ default:
+ puts("Unknown");
+ break;
+ }
+
+ if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
+ puts("E");
+
+ printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
+
+ puts("Clock Configuration:");
+
+ printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk));
+ printf("\n Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk));
+ printf("DDR:%-4s MHz (%s MT/s data rate), ",
+ strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk));
+ puts("\n");
+
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+
+ return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+ icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ dcache_enable();
+#endif
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int cpu_mmc_init(bd_t *bis)
+{
+ return fsl_esdhc_mmc_init(bis);
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+ tsec_standard_init(bis);
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
new file mode 100644
index 0000000..49e6f39
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch/clock.h>
+#include <linux/ctype.h>
+#ifdef CONFIG_FSL_ESDHC
+#include <fsl_esdhc.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ int off;
+ int val;
+ unsigned long busclk = get_bus_freq(0);
+
+ fdt_fixup_ethernet(blob);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ val = gd->cpu_clk;
+ fdt_setprop(blob, off, "clock-frequency", &val, 4);
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ do_fixup_by_prop_u32(blob,
+ "device_type", "soc", 4, "bus-frequency", busclk / 2, 1);
+
+#ifdef CONFIG_SYS_NS16550
+ do_fixup_by_compat_u32(blob, "fsl,ns16550",
+ "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+#endif
+
+ do_fixup_by_compat_u32(blob, "fsl,sys-clock",
+ "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+
+#if defined(CONFIG_FSL_ESDHC)
+ fdt_fixup_esdhc(blob, bd);
+#endif
+
+ /*
+ * platform bus clock = system bus clock/2
+ * Here busclk = system bus clock
+ * We are using the platform bus clock as 1588 Timer reference
+ * clock source select
+ */
+ do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
+ "timer-frequency", busclk / 2, 1);
+
+ /*
+ * clock-freq should change to clock-frequency and
+ * flexcan-v1.0 should change to p1010-flexcan respectively
+ * in the future.
+ */
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock_freq", busclk / 2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
+ "clock-frequency", busclk / 2, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
+ "clock-frequency", busclk / 2, 1);
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
new file mode 100644
index 0000000..9d8bc28
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include "fsl_ls1_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u64 serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+static u64 serdes2_prtcl_map;
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ u64 ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ ret |= (1ULL << device) & serdes1_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ ret |= (1ULL << device) & serdes2_prtcl_map;
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ case FSL_SRDS_1:
+ cfg &= RCWSR4_SRDS1_PRTCL_MASK;
+ cfg >>= RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ case FSL_SRDS_2:
+ cfg &= RCWSR4_SRDS2_PRTCL_MASK;
+ cfg >>= RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u64 serdes_prtcl_map = 0;
+ u32 cfg;
+ int lane;
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ serdes_prtcl_map |= (1ULL << lane_prtcl);
+ }
+
+ return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_SERDES_ADDR,
+ RCWSR4_SRDS1_PRTCL_MASK,
+ RCWSR4_SRDS1_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_2
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+ RCWSR4_SRDS2_PRTCL_MASK,
+ RCWSR4_SRDS2_PRTCL_SHIFT);
+#endif
+}
+
+const char *serdes_clock_to_string(u32 clock)
+{
+ switch (clock) {
+ case SRDS_PLLCR0_RFCK_SEL_100:
+ return "100";
+ case SRDS_PLLCR0_RFCK_SEL_125:
+ return "125";
+ default:
+ return "100";
+ }
+}
+
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
new file mode 100644
index 0000000..834aa53
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_LS1_SERDES_H
+#define __FSL_LS1_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+#endif /* __FSL_LS1_SERDES_H */
diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
new file mode 100644
index 0000000..cc53910
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_serdes.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/immap_ls102xa.h>
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1},
+ [0x10] = {PCIE1, SATA1, PCIE2, PCIE2},
+ [0x20] = {PCIE1, SGMII_TSEC1, PCIE2, SGMII_TSEC2},
+ [0x30] = {PCIE1, SATA1, SGMII_TSEC1, SGMII_TSEC2},
+ [0x40] = {PCIE1, PCIE1, SATA1, SGMII_TSEC2},
+ [0x50] = {PCIE1, PCIE1, PCIE2, SGMII_TSEC2},
+ [0x60] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+ [0x70] = {PCIE1, SATA1, PCIE2, SGMII_TSEC2},
+ [0x80] = {PCIE2, PCIE2, PCIE2, PCIE2},
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
new file mode 100644
index 0000000..11b17b2
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+ ulong ticks;
+
+ if (usec < 1000)
+ ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+ else
+ ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+ return ticks;
+}
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, freq);
+
+ return tick;
+}
+
+static inline unsigned long long us_to_tick(unsigned long long usec)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ usec = usec * freq + 999999;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+int timer_init(void)
+{
+ struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
+ unsigned long ctrl, val, freq;
+
+ /* Enable System Counter */
+ writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
+
+ freq = GENERIC_TIMER_CLK;
+ asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* Set PL1 Physical Timer Ctrl */
+ ctrl = ARCH_TIMER_CTRL_ENABLE;
+ asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+
+ /* Set PL1 Physical Comp Value */
+ val = TIMER_COMP_VAL;
+ asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
+
+ gd->arch.tbl = 0;
+ gd->arch.tbu = 0;
+
+ return 0;
+}
+
+unsigned long long get_ticks(void)
+{
+ unsigned long long now;
+
+ asm("mrrc p15, 0, %Q0, %R0, c14" : "=r" (now));
+
+ gd->arch.tbl = (unsigned long)(now & 0xffffffff);
+ gd->arch.tbu = (unsigned long)(now >> 32);
+
+ return now;
+}
+
+unsigned long get_timer_masked(void)
+{
+ return tick_to_time(get_ticks());
+}
+
+unsigned long get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/* delay x useconds and preserve advance timstamp value */
+void __udelay(unsigned long usec)
+{
+ unsigned long long start;
+ unsigned long tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = us_to_tick(usec); /* convert usecs to ticks */
+
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+unsigned long get_tbclk(void)
+{
+ unsigned long freq;
+
+ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (freq));
+
+ return freq;
+}
diff --git a/arch/arm/include/asm/arch-ls102xa/clock.h b/arch/arm/include/asm/arch-ls102xa/clock.h
new file mode 100644
index 0000000..fd36bb0
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/clock.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_LS102XA_CLOCK_H_
+#define __ASM_ARCH_LS102XA_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_UART_CLK,
+ MXC_ESDHC_CLK,
+ MXC_I2C_CLK,
+ MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_LS102XA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
new file mode 100644
index 0000000..4041577
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV7_LS102xA_CONFIG_
+#define _ASM_ARMV7_LS102xA_CONFIG_
+
+#define CONFIG_SYS_IMMR 0x01000000
+
+#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500)
+
+#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000
+#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000
+#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000
+#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000
+
+#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
+#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+
+#define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000)
+
+#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
+
+#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
+
+#ifdef CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3
+#define CONFIG_SYS_FSL_DDR
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+#endif
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+
+#define CONFIG_SYS_FSL_SRDS_1
+
+#ifdef CONFIG_LS102xA
+#define CONFIG_MAX_CPUS 2
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#else
+#error SoC not defined
+#endif
+
+#endif /* _ASM_ARMV7_LS102xA_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
new file mode 100644
index 0000000..3a92f5a
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/fsl_serdes.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SERDES_H
+#define __FSL_SERDES_H
+
+#include <config.h>
+
+enum srds_prtcl {
+ NONE = 0,
+ PCIE1,
+ PCIE2,
+ SATA1,
+ SGMII_TSEC1,
+ SGMII_TSEC2,
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+const char *serdes_clock_to_string(u32 clock);
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+
+#endif /* __FSL_SERDES_H */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
new file mode 100644
index 0000000..65fb4bf
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -0,0 +1,461 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_LS102XA_IMMAP_H_
+#define __ASM_ARCH_LS102XA_IMMAP_H_
+
+#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
+#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
+#define SVR_SOC_VER(svr) (((svr) >> 8) & 0x7ff)
+#define IS_E_PROCESSOR(svr) (svr & 0x80000)
+
+#define SOC_VER_SLS1020 0x00
+#define SOC_VER_LS1020 0x10
+#define SOC_VER_LS1021 0x11
+#define SOC_VER_LS1022 0x12
+
+#define RCWSR0_SYS_PLL_RAT_SHIFT 25
+#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
+#define RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define RCWSR0_MEM_PLL_RAT_MASK 0x3f
+
+#define RCWSR4_SRDS1_PRTCL_SHIFT 24
+#define RCWSR4_SRDS1_PRTCL_MASK 0xff000000
+
+#define TIMER_COMP_VAL 0xffffffff
+#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
+#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
+
+struct sys_info {
+ unsigned long freq_processor[CONFIG_MAX_CPUS];
+ unsigned long freq_systembus;
+ unsigned long freq_ddrbus;
+ unsigned long freq_localbus;
+};
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+ u32 porsr1; /* POR status 1 */
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u32 gpporcr2;
+ u32 dcfg_fusesr; /* Fuse status register */
+ u8 res_02c[0x70-0x2c];
+ u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+ u32 devdisr5; /* Device disable control 5 */
+ u8 res_084[0x94-0x84];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res_09c[0xa4-0x9c];
+ u32 svr; /* System version */
+ u8 res_0a8[0xb0-0xa8];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res_0b8[0xc0-0xb8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res_0c4[0xc8-0xc4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res_0cc[0xd4-0xcc];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res_0d8[0xdc-0xd8];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res_0e0[0xe4-0xe0];
+ u32 brrl; /* Boot release */
+ u8 res_0e8[0x100-0xe8];
+ u32 rcwsr[16]; /* Reset control word status */
+ u8 res_140[0x200-0x140];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res_210[0x300-0x210];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res_310[0x400-0x310];
+ u32 crstsr;
+ u8 res_404[0x550-0x404];
+ u32 sataliodnr;
+ u8 res_554[0x604-0x554];
+ u32 pamubypenr;
+ u32 dmacr1;
+ u8 res_60c[0x740-0x60c]; /* add more registers when needed */
+ u32 tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ u32 upper;
+ u32 lower;
+ } tp_cluster[1]; /* Core Cluster n Topology Register */
+ u8 res_848[0xe60-0x848];
+ u32 ddrclkdr;
+ u8 res_e60[0xe68-0xe64];
+ u32 ifcclkdr;
+ u8 res_e68[0xe80-0xe6c];
+ u32 sdhcpcr;
+};
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+ u32 dpslpcr;
+ u32 resv0[2];
+ u32 etsecclkdpslpcr;
+ u32 resv1[5];
+ u32 fuseovrdcr;
+ u32 pixclkcr;
+ u32 resv2[5];
+ u32 spimsicr;
+ u32 resv3[6];
+ u32 pex1pmwrcr;
+ u32 pex1pmrdsr;
+ u32 resv4[3];
+ u32 usb3prm1cr;
+ u32 usb4prm2cr;
+ u32 pex1rdmsgpldlsbsr;
+ u32 pex1rdmsgpldmsbsr;
+ u32 pex2rdmsgpldlsbsr;
+ u32 pex2rdmsgpldmsbsr;
+ u32 pex1rdmmsgrqsr;
+ u32 pex2rdmmsgrqsr;
+ u32 spimsiclrcr;
+ u32 pex1mscportsr;
+ u32 pex2mscportsr;
+ u32 pex2pmwrcr;
+ u32 resv5[24];
+ u32 mac1_streamid;
+ u32 mac2_streamid;
+ u32 mac3_streamid;
+ u32 pex1_streamid;
+ u32 pex2_streamid;
+ u32 dma_streamid;
+ u32 sata_streamid;
+ u32 usb3_streamid;
+ u32 qe_streamid;
+ u32 sdhc_streamid;
+ u32 adma_streamid;
+ u32 letechsftrstcr;
+ u32 core0_sft_rst;
+ u32 core1_sft_rst;
+ u32 resv6[1];
+ u32 usb_hi_addr;
+ u32 etsecclkadjcr;
+ u32 sai_clk;
+ u32 resv7[1];
+ u32 dcu_streamid;
+ u32 usb2_streamid;
+ u32 ftm_reset;
+ u32 altcbar;
+ u32 qspi_cfg;
+ u32 pmcintecr;
+ u32 pmcintlecr;
+ u32 pmcintsr;
+ u32 qos1;
+ u32 qos2;
+ u32 qos3;
+ u32 cci_cfg;
+ u32 resv8[1];
+ u32 etsecdmamcr;
+ u32 usb3prm3cr;
+ u32 resv9[1];
+ u32 debug_streamid;
+ u32 resv10[5];
+ u32 snpcnfgcr;
+ u32 resv11[1];
+ u32 intpcr;
+ u32 resv12[20];
+ u32 scfgrevcr;
+ u32 coresrencr;
+ u32 pex2pmrdsr;
+ u32 ddrc1cr;
+ u32 ddrc2cr;
+ u32 ddrc3cr;
+ u32 ddrc4cr;
+ u32 ddrgcr;
+ u32 resv13[120];
+ u32 qeioclkcr;
+ u32 etsecmcr;
+ u32 sdhciovserlcr;
+ u32 resv14[61];
+ u32 sparecr;
+};
+
+/* Clocking */
+struct ccsr_clk {
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x1c];
+ } clkcsr[2];
+ u8 res_040[0x7c0]; /* 0x100 */
+ struct {
+ u32 pllcngsr;
+ u8 res_804[0x1c];
+ } pllcgsr[2];
+ u8 res_840[0x1c0];
+ u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
+ u8 res_a04[0x1fc];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res_c04[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+ u32 cntcr;
+ u32 cntsr;
+ u32 cntcv1;
+ u32 cntcv2;
+ u32 resv1[4];
+ u32 cntfid0;
+ u32 cntfid1;
+ u32 resv2[1002];
+ u32 counterid[12];
+};
+
+#define MAX_SERDES 1
+#define SRDS_MAX_LANES 4
+#define SRDS_MAX_BANK 2
+
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDEN 0x00000020
+#define SRDS_RSTCTL_SDRST_B 0x00000040
+#define SRDS_RSTCTL_PLLRST_B 0x00000080
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_PLL_LCK 0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+
+struct ccsr_serdes {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+
+ u32 pllcr0; /* PLL Control Register 0 */
+
+ u32 pllcr1; /* PLL Control Register 1 */
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[4];
+ u8 res_180[0x300-0x180];
+ u32 srdspexeqcr;
+ u32 srdspexeqpcr[11];
+ u8 res_330[0x400-0x330];
+ u32 srdspexapcr;
+ u8 res_404[0x440-0x404];
+ u32 srdspexbpcr;
+ u8 res_444[0x800-0x444];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 sscr0;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 recr1;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 sscr1;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x83c-0x824];
+ u32 tcsr3;
+ } lane[4]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+};
+
+/* DDR memory controller registers */
+struct ccsr_ddr {
+ u32 cs0_bnds; /* Chip Select 0 Memory Bounds */
+ u32 resv1[1];
+ u32 cs1_bnds; /* Chip Select 1 Memory Bounds */
+ u32 resv2[1];
+ u32 cs2_bnds; /* Chip Select 2 Memory Bounds */
+ u32 resv3[1];
+ u32 cs3_bnds; /* Chip Select 3 Memory Bounds */
+ u32 resv4[25];
+ u32 cs0_config; /* Chip Select Configuration */
+ u32 cs1_config; /* Chip Select Configuration */
+ u32 cs2_config; /* Chip Select Configuration */
+ u32 cs3_config; /* Chip Select Configuration */
+ u32 resv5[12];
+ u32 cs0_config_2; /* Chip Select Configuration 2 */
+ u32 cs1_config_2; /* Chip Select Configuration 2 */
+ u32 cs2_config_2; /* Chip Select Configuration 2 */
+ u32 cs3_config_2; /* Chip Select Configuration 2 */
+ u32 resv6[12];
+ u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */
+ u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */
+ u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */
+ u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */
+ u32 sdram_cfg; /* SDRAM Control Configuration */
+ u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */
+ u32 sdram_mode; /* SDRAM Mode Configuration */
+ u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */
+ u32 sdram_md_cntl; /* SDRAM Mode Control */
+ u32 sdram_interval; /* SDRAM Interval Configuration */
+ u32 sdram_data_init; /* SDRAM Data initialization */
+ u32 resv7[1];
+ u32 sdram_clk_cntl; /* SDRAM Clock Control */
+ u32 resv8[5];
+ u32 init_addr; /* training init addr */
+ u32 init_ext_addr; /* training init extended addr */
+ u32 resv9[4];
+ u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */
+ u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */
+ u32 timing_cfg_6; /* SDRAM Timing Configuration 6 */
+ u32 timing_cfg_7; /* SDRAM Timing Configuration 7 */
+ u32 ddr_zq_cntl; /* ZQ calibration control*/
+ u32 ddr_wrlvl_cntl; /* write leveling control*/
+ u32 resv10[1];
+ u32 ddr_sr_cntr; /* self refresvh counter */
+ u32 ddr_sdram_rcw_1; /* Control Words 1 */
+ u32 ddr_sdram_rcw_2; /* Control Words 2 */
+ u32 resv11[2];
+ u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */
+ u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */
+ u32 resv12[2];
+ u32 ddr_sdram_rcw_3; /* Control Words 3 */
+ u32 ddr_sdram_rcw_4; /* Control Words 4 */
+ u32 ddr_sdram_rcw_5; /* Control Words 5 */
+ u32 ddr_sdram_rcw_6; /* Control Words 6 */
+ u32 resv13[20];
+ u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */
+ u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */
+ u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */
+ u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */
+ u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */
+ u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */
+ u32 sdram_mode_9; /* SDRAM Mode Configuration 9 */
+ u32 sdram_mode_10; /* SDRAM Mode Configuration 10 */
+ u32 sdram_mode_11; /* SDRAM Mode Configuration 11 */
+ u32 sdram_mode_12; /* SDRAM Mode Configuration 12 */
+ u32 sdram_mode_13; /* SDRAM Mode Configuration 13 */
+ u32 sdram_mode_14; /* SDRAM Mode Configuration 14 */
+ u32 sdram_mode_15; /* SDRAM Mode Configuration 15 */
+ u32 sdram_mode_16; /* SDRAM Mode Configuration 16 */
+ u32 resv14[4];
+ u32 timing_cfg_8; /* SDRAM Timing Configuration 8 */
+ u32 timing_cfg_9; /* SDRAM Timing Configuration 9 */
+ u32 resv15[2];
+ u32 sdram_cfg_3; /* SDRAM Control Configuration 3 */
+ u32 resv16[15];
+ u32 deskew_cntl; /* SDRAM Deskew Control */
+ u32 resv17[545];
+ u32 ddr_dsr1; /* Debug Status 1 */
+ u32 ddr_dsr2; /* Debug Status 2 */
+ u32 ddr_cdr1; /* Control Driver 1 */
+ u32 ddr_cdr2; /* Control Driver 2 */
+ u32 resv18[50];
+ u32 ip_rev1; /* IP Block Revision 1 */
+ u32 ip_rev2; /* IP Block Revision 2 */
+ u32 eor; /* Enhanced Optimization Register */
+ u32 resv19[63];
+ u32 mtcr; /* Memory Test Control Register */
+ u32 resv20[7];
+ u32 mtp1; /* Memory Test Pattern 1 */
+ u32 mtp2; /* Memory Test Pattern 2 */
+ u32 mtp3; /* Memory Test Pattern 3 */
+ u32 mtp4; /* Memory Test Pattern 4 */
+ u32 mtp5; /* Memory Test Pattern 5 */
+ u32 mtp6; /* Memory Test Pattern 6 */
+ u32 mtp7; /* Memory Test Pattern 7 */
+ u32 mtp8; /* Memory Test Pattern 8 */
+ u32 mtp9; /* Memory Test Pattern 9 */
+ u32 mtp10; /* Memory Test Pattern 10 */
+ u32 resv21[6];
+ u32 ddr_mt_st_ext_addr; /* Memory Test Start Extended Address */
+ u32 ddr_mt_st_addr; /* Memory Test Start Address */
+ u32 ddr_mt_end_ext_addr; /* Memory Test End Extended Address */
+ u32 ddr_mt_end_addr; /* Memory Test End Address */
+ u32 resv22[36];
+ u32 data_err_inject_hi; /* Data Path Err Injection Mask High */
+ u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */
+ u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */
+ u32 resv23[5];
+ u32 capture_data_hi; /* Data Path Read Capture High */
+ u32 capture_data_lo; /* Data Path Read Capture Low */
+ u32 capture_ecc; /* Data Path Read Capture ECC */
+ u32 resv24[5];
+ u32 err_detect; /* Error Detect */
+ u32 err_disable; /* Error Disable */
+ u32 err_int_en;
+ u32 capture_attributes; /* Error Attrs Capture */
+ u32 capture_address; /* Error Addr Capture */
+ u32 capture_ext_address; /* Error Extended Addr Capture */
+ u32 err_sbe; /* Single-Bit ECC Error Management */
+ u32 resv25[105];
+};
+
+/* CCI-400 registers */
+struct ccsr_cci400 {
+ u32 ctrl_ord; /* Control Override */
+ u32 spec_ctrl; /* Speculation Control */
+ u32 secure_access; /* Secure Access */
+ u32 status; /* Status */
+ u32 impr_err; /* Imprecise Error */
+ u8 res_14[0x100 - 0x14];
+ u32 pmcr; /* Performance Monitor Control */
+ u8 res_104[0xfd0 - 0x104];
+ u32 pid[8]; /* Peripheral ID */
+ u32 cid[4]; /* Component ID */
+ struct {
+ u32 snoop_ctrl; /* Snoop Control */
+ u32 sha_ord; /* Shareable Override */
+ u8 res_1008[0x1100 - 0x1008];
+ u32 rc_qos_ord; /* read channel QoS Value Override */
+ u32 wc_qos_ord; /* read channel QoS Value Override */
+ u8 res_1108[0x110c - 0x1108];
+ u32 qos_ctrl; /* QoS Control */
+ u32 max_ot; /* Max OT */
+ u8 res_1114[0x1130 - 0x1114];
+ u32 target_lat; /* Target Latency */
+ u32 latency_regu; /* Latency Regulation */
+ u32 qos_range; /* QoS Range */
+ u8 res_113c[0x2000 - 0x113c];
+ } slave[5]; /* Slave Interface */
+ u8 res_6000[0x9004 - 0x6000];
+ u32 cycle_counter; /* Cycle counter */
+ u32 count_ctrl; /* Count Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_9010[0xa000 - 0x9010];
+ struct {
+ u32 event_select; /* Event Select */
+ u32 event_count; /* Event Count */
+ u32 counter_ctrl; /* Counter Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_a010[0xb000 - 0xa010];
+ } pcounter[4]; /* Performance Counter */
+ u8 res_e004[0x10000 - 0xe004];
+};
+#endif /* __ASM_ARCH_LS102XA_IMMAP_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/imx-regs.h b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
new file mode 100644
index 0000000..f9cd75b
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/imx-regs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_IMX_REGS_H__
+#define __ASM_ARCH_IMX_REGS_H__
+
+#define I2C_QUIRK_REG /* enable 8-bit driver */
+
+#ifdef CONFIG_LPUART_32B_REG
+struct lpuart_fsl {
+ u32 baud;
+ u32 stat;
+ u32 ctrl;
+ u32 data;
+ u32 match;
+ u32 modir;
+ u32 fifo;
+ u32 water;
+};
+#else
+struct lpuart_fsl {
+ u8 ubdh;
+ u8 ubdl;
+ u8 uc1;
+ u8 uc2;
+ u8 us1;
+ u8 us2;
+ u8 uc3;
+ u8 ud;
+ u8 uma1;
+ u8 uma2;
+ u8 uc4;
+ u8 uc5;
+ u8 ued;
+ u8 umodem;
+ u8 uir;
+ u8 reserved;
+ u8 upfifo;
+ u8 ucfifo;
+ u8 usfifo;
+ u8 utwfifo;
+ u8 utcfifo;
+ u8 urwfifo;
+ u8 urcfifo;
+ u8 rsvd[28];
+};
+#endif
+
+#endif /* __ASM_ARCH_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 2a20a77..6c8ea9f 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -17,4 +17,8 @@
#define CONFIG_STATIC_RELA
#endif
+#ifdef CONFIG_LS102xA
+#include <asm/arch/config.h>
+#endif
+
#endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 9f35fd6..483f5f9 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -367,7 +367,12 @@ out:
return retval;
}
-#elif !defined(readb)
+#else
+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+
+#if !defined(readb)
#define readb(addr) (__readwrite_bug("readb"),0)
#define readw(addr) (__readwrite_bug("readw"),0)
@@ -380,6 +385,7 @@ out:
#define check_signature(io,sig,len) (0)
+#endif
#endif /* __mem_pci */
/*
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 06ced10..a869eae 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -7,7 +7,7 @@
obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
-ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610))
+ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 vf610 ls102xa))
obj-y += imx_watchdog.o
endif
obj-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
--
1.8.0
More information about the U-Boot
mailing list