[U-Boot] [PATCH v5 11/11] ARM: HYP/non-sec: remove MIDR check to validate CBAR

[Ian Campbell]

From: Marc Zyngier <marc.zyngier at arm.com>

Having a form of whitelist to check if we know of a CPU core
and and obtain CBAR is a bit silly.

It doesn't scale (how about A12, A17, as well as other I don't know
about?), and is actually a property of the SoC, not the core.

So either it works and everybody is happy, or it doesn't and
the u-boot port to this SoC is providing the real address via
a configuration option.

The result of the above is that this code doesn't need to exist,
is thus forcefully removed.

Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
Acked-by: Ian Campbell <ijc at hellion.org.uk>
---
 arch/arm/cpu/armv7/virt-v7.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 6500030..651ca40 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -30,25 +30,8 @@ static unsigned long get_gicd_base_address(void)
 #ifdef CONFIG_ARM_GIC_BASE_ADDRESS
 	return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
 #else
-	unsigned midr;
 	unsigned periphbase;
 
-	/* check whether we are an Cortex-A15 or A7.
-	 * The actual HYP switch should work with all CPUs supporting
-	 * the virtualization extension, but we need the GIC address,
-	 * which we know only for sure for those two CPUs.
-	 */
-	asm("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
-	switch (midr & MIDR_PRIMARY_PART_MASK) {
-	case MIDR_CORTEX_A9_R0P1:
-	case MIDR_CORTEX_A15_R0P0:
-	case MIDR_CORTEX_A7_R0P0:
-		break;
-	default:
-		printf("nonsec: could not determine GIC address.\n");
-		return -1;
-	}
-
 	/* get the GIC base address from the CBAR register */
 	asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
 
-- 
2.0.1