[U-Boot] [U-boot] [Patch 6/6] keystone: ddr3: move K2HK DDR3 configuration to a common file
Ivan Khoronzhuk
ivan.khoronzhuk at ti.com
Wed Jul 9 22:44:49 CEST 2014
From: Hao Zhang <hzhang at ti.com>
It's convenient to hold configurations for DDR3 PHY and EMIF in
separate common place. This patch moves K2HK DDR3 PHY and EMIF
configuration data with different rates and memory size to a common
ddr3_cfg.c file.
Acked-by: Murali Karicheri <m-karicheri2 at ti.com>
Signed-off-by: Hao Zhang <hzhang at ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk at ti.com>
---
board/ti/ks2_evm/Makefile | 1 +
board/ti/ks2_evm/ddr3_cfg.c | 130 ++++++++++++++++++
board/ti/ks2_evm/ddr3_cfg.h | 21 +++
board/ti/ks2_evm/ddr3_k2hk.c | 305 +++----------------------------------------
4 files changed, 172 insertions(+), 285 deletions(-)
create mode 100644 board/ti/ks2_evm/ddr3_cfg.c
create mode 100644 board/ti/ks2_evm/ddr3_cfg.h
diff --git a/board/ti/ks2_evm/Makefile b/board/ti/ks2_evm/Makefile
index 58d77dc..774a7d5 100644
--- a/board/ti/ks2_evm/Makefile
+++ b/board/ti/ks2_evm/Makefile
@@ -6,5 +6,6 @@
#
obj-y += board.o
+obj-y += ddr3_cfg.o
obj-$(CONFIG_K2HK_EVM) += board_k2hk.o
obj-$(CONFIG_K2HK_EVM) += ddr3_k2hk.o
diff --git a/board/ti/ks2_evm/ddr3_cfg.c b/board/ti/ks2_evm/ddr3_cfg.c
new file mode 100644
index 0000000..6e55af9
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_cfg.c
@@ -0,0 +1,130 @@
+/*
+ * Keystone2: DDR3 configuration
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <i2c.h>
+#include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* DDR3 PHY configuration data with 1600M rate, 8GB size */
+struct ddr3_phy_config ddr3phy_1600_8g = {
+ .pllcr = 0x0001C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0D861A80ul,
+ .ptr4 = 0x0C827100ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+ .dcr_val = ((1 << 10)),
+ .dtpr0 = 0xA19DBB66ul,
+ .dtpr1 = 0x32868300ul,
+ .dtpr2 = 0x50035200ul,
+ .mr0 = 0x00001C70ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000018ul,
+ .dtcr = 0x730035C7ul,
+ .pgcr2 = 0x00F07A12ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+/* DDR3 EMIF configuration data with 1600M rate, 8GB size */
+struct ddr3_emif_config ddr3_1600_8g = {
+ .sdcfg = 0x6200CE6Aul,
+ .sdtim1 = 0x16709C55ul,
+ .sdtim2 = 0x00001D4Aul,
+ .sdtim3 = 0x435DFF54ul,
+ .sdtim4 = 0x553F0CFFul,
+ .zqcfg = 0xF0073200ul,
+ .sdrfc = 0x00001869ul,
+};
+
+#ifdef CONFIG_K2HK_EVM
+/* DDR3 PHY configuration data with 1333M rate, and 2GB size */
+struct ddr3_phy_config ddr3phy_1333_2g = {
+ .pllcr = 0x0005C000ul,
+ .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
+ .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
+ .ptr0 = 0x42C21590ul,
+ .ptr1 = 0xD05612C0ul,
+ .ptr2 = 0, /* not set in gel */
+ .ptr3 = 0x0B4515C2ul,
+ .ptr4 = 0x0A6E08B4ul,
+ .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+ .dcr_val = ((1 << 10)),
+ .dtpr0 = 0x8558AA55ul,
+ .dtpr1 = 0x32857280ul,
+ .dtpr2 = 0x5002C200ul,
+ .mr0 = 0x00001A60ul,
+ .mr1 = 0x00000006ul,
+ .mr2 = 0x00000010ul,
+ .dtcr = 0x710035C7ul,
+ .pgcr2 = 0x00F065B8ul,
+ .zq0cr1 = 0x0000005Dul,
+ .zq1cr1 = 0x0000005Bul,
+ .zq2cr1 = 0x0000005Bul,
+ .pir_v1 = 0x00000033ul,
+ .pir_v2 = 0x0000FF81ul,
+};
+
+/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */
+struct ddr3_emif_config ddr3_1333_2g = {
+ .sdcfg = 0x62008C62ul,
+ .sdtim1 = 0x125C8044ul,
+ .sdtim2 = 0x00001D29ul,
+ .sdtim3 = 0x32CDFF43ul,
+ .sdtim4 = 0x543F0ADFul,
+ .zqcfg = 0x70073200ul,
+ .sdrfc = 0x00001457ul,
+};
+#endif
+
+int ddr3_get_dimm_params(char *dimm_name)
+{
+ int ret;
+ int old_bus;
+ u8 spd_params[256];
+
+ i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
+
+ old_bus = i2c_get_bus_num();
+ i2c_set_bus_num(1);
+
+ ret = i2c_read(0x53, 0, 1, spd_params, 256);
+
+ i2c_set_bus_num(old_bus);
+
+ dimm_name[0] = '\0';
+
+ if (ret) {
+ puts("Cannot read DIMM params\n");
+ return 1;
+ }
+
+ /*
+ * We need to convert spd data to dimm parameters
+ * and to DDR3 EMIF and PHY regirsters values.
+ * For now we just return DIMM type string value.
+ * Caller may use this value to choose appropriate
+ * a pre-set DDR3 configuration
+ */
+
+ strncpy(dimm_name, (char *)&spd_params[0x80], 18);
+ dimm_name[18] = '\0';
+
+ return 0;
+}
diff --git a/board/ti/ks2_evm/ddr3_cfg.h b/board/ti/ks2_evm/ddr3_cfg.h
new file mode 100644
index 0000000..d14bac3
--- /dev/null
+++ b/board/ti/ks2_evm/ddr3_cfg.h
@@ -0,0 +1,21 @@
+/*
+ * Keystone2: DDR3 configuration
+ *
+ * (C) Copyright 2012-2014
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DDR3_CFG_H
+#define __DDR3_CFG_H
+
+extern struct ddr3_phy_config ddr3phy_1600_8g;
+extern struct ddr3_emif_config ddr3_1600_8g;
+
+extern struct ddr3_phy_config ddr3phy_1333_2g;
+extern struct ddr3_emif_config ddr3_1333_2g;
+
+int ddr3_get_dimm_params(char *dimm_name);
+
+#endif /* __DDR3_CFG_H */
diff --git a/board/ti/ks2_evm/ddr3_k2hk.c b/board/ti/ks2_evm/ddr3_k2hk.c
index 31e9c31..21a5a0a 100644
--- a/board/ti/ks2_evm/ddr3_k2hk.c
+++ b/board/ti/ks2_evm/ddr3_k2hk.c
@@ -8,287 +8,18 @@
*/
#include <common.h>
+#include "ddr3_cfg.h"
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <i2c.h>
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1600_64A = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x12868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1600_64 = {
- .sdcfg = 0x6200CE6aul,
- .sdtim1 = 0x16709C55ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x435DFF54ul,
- .sdtim4 = 0x553F0CFFul,
- .zqcfg = 0xF0073200ul,
- .sdrfc = 0x00001869ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1600_32 = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x12868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1600_32 = {
- .sdcfg = 0x6200DE6aul,
- .sdtim1 = 0x16709C55ul,
- .sdtim2 = 0x00001D4Aul,
- .sdtim3 = 0x435DFF54ul,
- .sdtim4 = 0x553F0CFFul,
- .zqcfg = 0x70073200ul,
- .sdrfc = 0x00001869ul,
-};
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1333_64A = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
- NOSRA_MASK | UDIMM_MASK),
- .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1333_64 = {
- .sdcfg = 0x62008C62ul,
- .sdtim1 = 0x125C8044ul,
- .sdtim2 = 0x00001D29ul,
- .sdtim3 = 0x32CDFF43ul,
- .sdtim4 = 0x543F0ADFul,
- .zqcfg = 0xF0073200ul,
- .sdrfc = 0x00001457ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1333_32 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK |
- NOSRA_MASK | UDIMM_MASK),
- .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_emif_config ddr3_1333_32 = {
- .sdcfg = 0x62009C62ul,
- .sdtim1 = 0x125C8044ul,
- .sdtim2 = 0x00001D29ul,
- .sdtim3 = 0x32CDFF43ul,
- .sdtim4 = 0x543F0ADFul,
- .zqcfg = 0xf0073200ul,
- .sdrfc = 0x00001457ul,
-};
-
-/************************* *****************************/
-static struct ddr3_phy_config ddr3phy_1333_64 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK),
- .dcr_val = ((1 << 10) | (1 << 27)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x12857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0000005Dul,
- .zq1cr1 = 0x0000005Bul,
- .zq2cr1 = 0x0000005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-/******************************************************/
-
-/* DDR PHY Configs Updated for PG 2.0
- * zq0,1,2cr1 are updated for PG 2.0 specific configs *_pg2 */
-static struct ddr3_phy_config ddr3phy_1600_64A_pg2 = {
- .pllcr = 0x0001C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0D861A80ul,
- .ptr4 = 0x0C827100ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0xA19DBB66ul,
- .dtpr1 = 0x32868300ul,
- .dtpr2 = 0x50035200ul,
- .mr0 = 0x00001C70ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000018ul,
- .dtcr = 0x730035C7ul,
- .pgcr2 = 0x00F07A12ul,
- .zq0cr1 = 0x0001005Dul,
- .zq1cr1 = 0x0001005Bul,
- .zq2cr1 = 0x0001005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-static struct ddr3_phy_config ddr3phy_1333_64A_pg2 = {
- .pllcr = 0x0005C000ul,
- .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
- .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
- .ptr0 = 0x42C21590ul,
- .ptr1 = 0xD05612C0ul,
- .ptr2 = 0, /* not set in gel */
- .ptr3 = 0x0B4515C2ul,
- .ptr4 = 0x0A6E08B4ul,
- .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
- .dcr_val = ((1 << 10)),
- .dtpr0 = 0x8558AA55ul,
- .dtpr1 = 0x32857280ul,
- .dtpr2 = 0x5002C200ul,
- .mr0 = 0x00001A60ul,
- .mr1 = 0x00000006ul,
- .mr2 = 0x00000010ul,
- .dtcr = 0x710035C7ul,
- .pgcr2 = 0x00F065B8ul,
- .zq0cr1 = 0x0001005Dul,
- .zq1cr1 = 0x0001005Bul,
- .zq2cr1 = 0x0001005Bul,
- .pir_v1 = 0x00000033ul,
- .pir_v2 = 0x0000FF81ul,
-};
-
-int get_dimm_params(char *dimm_name)
-{
- u8 spd_params[256];
- int ret;
- int old_bus;
-
- i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
-
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- ret = i2c_read(0x53, 0, 1, spd_params, 256);
-
- i2c_set_bus_num(old_bus);
-
- dimm_name[0] = '\0';
-
- if (ret) {
- puts("Cannot read DIMM params\n");
- return 1;
- }
-
- /*
- * We need to convert spd data to dimm parameters
- * and to DDR3 EMIF and PHY regirsters values.
- * For now we just return DIMM type string value.
- * Caller may use this value to choose appropriate
- * a pre-set DDR3 configuration
- */
-
- strncpy(dimm_name, (char *)&spd_params[0x80], 18);
- dimm_name[18] = '\0';
-
- return 0;
-}
struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
-struct pll_init_data ddr3b_333 = DDR3_PLL_333(B);
struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
-struct pll_init_data ddr3b_400 = DDR3_PLL_400(B);
void ddr3_init(void)
{
char dimm_name[32];
- get_dimm_params(dimm_name);
+ ddr3_get_dimm_params(dimm_name);
printf("Detected SO-DIMM [%s]\n", dimm_name);
@@ -299,21 +30,25 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
+ ddr3phy_1600_8g.zq0cr1 |= 0x10000;
+ ddr3phy_1600_8g.zq1cr1 |= 0x10000;
+ ddr3phy_1600_8g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_64A_pg2);
+ &ddr3phy_1600_8g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1600_64A);
+ &ddr3phy_1600_8g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_64);
+ &ddr3_1600_8g);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
} else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_32);
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
+ ddr3_1600_8g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1600_32);
+ &ddr3_1600_8g);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
}
} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
@@ -323,27 +58,27 @@ void ddr3_init(void)
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
+ ddr3phy_1333_2g.zq0cr1 |= 0x10000;
+ ddr3phy_1333_2g.zq1cr1 |= 0x10000;
+ ddr3phy_1333_2g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_64A_pg2);
+ &ddr3phy_1333_2g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
- &ddr3phy_1333_64A);
+ &ddr3phy_1333_2g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_64);
+ &ddr3_1333_2g);
} else {
- ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_32);
+ ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
+ ddr3_1333_2g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
- &ddr3_1333_32);
+ &ddr3_1333_2g);
}
} else {
printf("Unknown SO-DIMM. Cannot configure DDR3\n");
while (1)
;
}
-
- init_pll(&ddr3b_333);
- ddr3_init_ddrphy(KS2_DDR3B_DDRPHYC, &ddr3phy_1333_64);
- ddr3_init_ddremif(KS2_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64);
}
--
1.8.3.2
More information about the U-Boot
mailing list