[U-Boot] [PATCH 3/4] ARM: LS1021A: enable ARMv7 virt support for LS1021A A7

[Xiubo Li]

To enable hypervisors utilizing the ARMv7 virtualization extension
on the LS1021A-QDS/TWR boards with the A7 core tile, we add the
required configuration variable.
Also we define the board specific smp_set_cpu_boot_addr() function to
set the start address for secondary cores in the LS1021A specific
manner.

Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
---
 arch/arm/cpu/armv7/ls102xa/cpu.c | 12 ++++++++++++
 include/configs/ls1021aqds.h     |  9 +++++++++
 include/configs/ls1021atwr.h     |  9 +++++++++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index f9046c6..2268f15 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -101,3 +101,15 @@ int cpu_eth_init(bd_t *bis)
 
 	return 0;
 }
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+/* Setting the address at which secondary cores start from.*/
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+	/* After setting the secondary cores start address, just release
+	 * them to boot.
+	 */
+	out_be32(CONFIG_DCFG_CCSR_SCRATCHRW1, addr);
+	out_be32(CONFIG_DCFG_CCSR_BRR, 0x2);
+}
+#endif
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index d639a6f..f090971 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -18,6 +18,15 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_ARCH_EARLY_INIT_R
 
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_SOC_BIG_ENDIAN
+#define CONFIG_DCFG_CCSR_SCRATCHRW1	0x01ee0200
+#define CONFIG_DCFG_CCSR_BRR		0x01ee00e4
+#define CONFIG_SMP_PEN_ADDR		CONFIG_DCFG_CCSR_SCRATCHRW1
+#define CONFIG_ARM_GIC_BASE_ADDRESS	0x01400000
+#define CONFIG_TIMER_CLK_FREQ		125000000
+
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a8dc56e..235a862 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -18,6 +18,15 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_ARCH_EARLY_INIT_R
 
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_SOC_BIG_ENDIAN
+#define CONFIG_DCFG_CCSR_SCRATCHRW1	0x01ee0200
+#define CONFIG_DCFG_CCSR_BRR		0x01ee00e4
+#define CONFIG_SMP_PEN_ADDR		CONFIG_DCFG_CCSR_SCRATCHRW1
+#define CONFIG_ARM_GIC_BASE_ADDRESS	0x01400000
+#define CONFIG_TIMER_CLK_FREQ		125000000
+
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
-- 
1.8.5