[U-Boot] [PATCH v6 02/15] Do not apply: tools: add genkconfig
Masahiro Yamada
yamada.m at jp.panasonic.com
Sun Jul 27 10:33:46 CEST 2014
========================================
Do not apply this patch to the main line
========================================
What is this tool?
------------------
This tool converts boards.cfg to defconfig and Kconfig files.
It automatically generates
- arch/${ARCH}/Kconfig
- board/${VENDOR}/${BOARD}/Kconfig
- board/${BOARD}/Kconfig
- configs/${TARGET_BOARD}_defconfig
How to use?
-----------
Open tools/print_allconfigs with an editor.
Adjust cross compilers part for your environment.
# Specify your favoriate cross tools
CROSS_COMPILE_ARC=arc-linux-
CROSS_COMPILE_AARCH64=aarch64-linux-gnu-
CROSS_COMPILE_ARM=arm-unknown-linux-gnueabi-
[snip]
CROSS_COMPILE_X86=i386-linux-
And then, run "tools/genkconfig".
Why is this patch here?
-----------------------
The file boards.cfg is touched very frequently.
All the time, new/old boards are being added/removed.
The next commit was generated based on the u-boot/master at the time
I posted it.
It will become out-dated soon.
You can update it with this tool.
Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
Changes in v6: None
Changes in v5:
- Add CPU select menu for PowerPC
Changes in v4:
- Remove debug code
- Do not specify CONFIG_SYS_CPU if the cpu field of boards.cfg is '-'
- Adjust to the current boards.cfg fields spec.
- Add "select CPU" to PowerPC Kconfig
- Generate only one defconfig per board
Changes in v3:
- Create SPL defconfig into configs/<board>_spl_defconfig
instead of conigs/spl/<board>_defconfig. Like the same for TPL.
Because I want to handle Falcon boot more genericlly.
If you build only configs/<board>_spl_defconfig, it is Falcon boot.
- Create board select menu based on the 8th field of boards.cfg.
It is common that many entries (= 7th field) share the same
config header. So this change help to reduce the code redandancy.
Changes in v2:
- Do not output CONFIG_BOARD_MAINTAINERS and CONFIG_BOARD_STATUS
- Delete board/Kconfig and move "source board/*/*/Kconfig"
statements to arch/*/Kconfig.
tools/genkconfig | 371 +++++++++++++++++++++++++++++++++++++++++++++++++
tools/print_allconfigs | 77 ++++++++++
2 files changed, 448 insertions(+)
create mode 100755 tools/genkconfig
create mode 100755 tools/print_allconfigs
diff --git a/tools/genkconfig b/tools/genkconfig
new file mode 100755
index 0000000..2d9cf1a
--- /dev/null
+++ b/tools/genkconfig
@@ -0,0 +1,371 @@
+#!/bin/bash
+
+set -e
+
+rm -rf configs
+mkdir configs
+find board -name Kconfig | xargs rm -f
+
+get_arch()
+{
+ case "$arch" in
+ powerpc) echo PPC;;
+ *) echo ${1^^};;
+ esac
+}
+
+get_ppc_cpu ()
+{
+ case "$1" in
+ 74xx_7xx) echo 74xx_7xx;;
+ mpc512x) echo MPC512X;;
+ mpc5xx) echo 5xx;;
+ mpc5xxx) echo MPC5xxx;;
+ mpc824x) echo MPC824X;;
+ mpc8260) echo MPC8260;;
+ mpc83xx) echo MPC83xx;;
+ mpc85xx) echo MPC85xx;;
+ mpc86xx) echo MPC86xx;;
+ mpc8xx) echo 8xx;;
+ ppc4xx) echo 4xx;;
+ *) echo >&2 Unkown PPC CPU $1; exit 1;;
+ esac
+}
+
+arch_list="arc arm avr32 blackfin m68k microblaze mips nds32 nios2 openrisc powerpc sandbox sh sparc x86"
+ppc_cpu_list="74xx_7xx mpc512x mpc5xx mpc5xxx mpc824x mpc8260 mpc83xx mpc85xx mpc86xx mpc8xx ppc4xx"
+
+for arch in $arch_list
+do
+ ARCH=$(get_arch $arch)
+
+ case "$arch" in
+ blackfin) menu="Blackfin";;
+ m68k) menu="M68000";;
+ microblaze) menu="MicroBlaze";;
+ nios2) menu="Nios II";;
+ openrisc) menu="OpenRISC";;
+ powerpc) menu="PowerPC";;
+ sandbox) menu="Sandbox";;
+ sh) menu="SuperH";;
+ x86) menu="x86";;
+ *) menu=${arch^^};;
+ esac
+
+cat <<EOF > arch/$arch/Kconfig
+menu "$menu architecture"
+ depends on $ARCH
+
+config SYS_ARCH
+ string
+ default "$arch"
+
+EOF
+
+if [ "$arch" = "powerpc" ]; then
+cat <<EOF >> arch/$arch/Kconfig
+choice
+ prompt "CPU select"
+
+config 74xx_7xx
+ bool "74xx"
+
+config MPC512X
+ bool "MPC512X"
+
+config 5xx
+ bool "MPC5xx"
+
+config MPC5xxx
+ bool "MPC5xxx"
+
+config MPC824X
+ bool "MPC824X"
+
+config MPC8260
+ bool "MPC8260"
+
+config MPC83xx
+ bool "MPC83xx"
+
+config MPC85xx
+ bool "MPC85xx"
+
+config MPC86xx
+ bool "MPC86xx"
+
+config 8xx
+ bool "MPC8xx"
+
+config 4xx
+ bool "PPC4xx"
+
+endchoice
+
+EOF
+for cpu in $ppc_cpu_list
+do
+ echo "source \"arch/powerpc/cpu/$cpu/Kconfig\"" >> arch/powerpc/Kconfig
+done
+
+fi
+
+if [ "$arch" = "sandbox" ]; then
+cat <<EOF >> arch/$arch/Kconfig
+config SYS_BOARD
+ string
+ default "$arch"
+
+config SYS_CONFIG_NAME
+ string
+ default "$arch"
+EOF
+elif [ "$arch" != "powerpc" ]; then
+cat <<EOF >> arch/$arch/Kconfig
+choice
+ prompt "Target select"
+
+EOF
+fi
+
+done
+
+for cpu in $ppc_cpu_list
+do
+cat <<EOF > arch/powerpc/cpu/$cpu/Kconfig
+menu "$cpu CPU"
+ depends on $(get_ppc_cpu $cpu)
+
+config SYS_CPU
+ string
+ default "$cpu"
+
+choice
+ prompt "Target select"
+
+EOF
+
+done
+
+write_defconfig() {
+
+ if [ "$spl_enable" = "y" ]; then
+ echo >> $defconfig "CONFIG_SPL=y"
+ fi
+
+ if [ "$tpl_enable" = "y" ]; then
+ echo >> $defconfig "CONFIG_TPL=y"
+ fi
+
+ if [ "$tpl_enable" = "y" ]; then
+ prefix="+ST:"
+ elif [ "$spl_enable" = "y" ]; then
+ prefix="+S:"
+ else
+ prefix=
+ fi
+
+ if [ "$extra_options" ]; then
+ # O2MNT_O2M110, O2MNT_O2M112, O2MNT_O2M113 boards include
+ # double-quotations in the extra option field.
+ # We must escape them.
+ echo >> $defconfig "CONFIG_SYS_EXTRA_OPTIONS=\"$(echo "$extra_options" | sed -e 's/"/\\"/g')\""
+ fi
+
+ if [ "$arch" = sandbox ]; then
+ touch $defconfig
+ else
+ echo >> $defconfig "${prefix}CONFIG_$ARCH=y"
+ if [ "$arch" = powerpc ]; then
+ echo >> $defconfig "${prefix}CONFIG_$CPU=y"
+ fi
+ echo >> $defconfig "${prefix}CONFIG_$TARGET=y"
+ fi
+}
+
+write_kconfig ()
+{
+ echo >> $kconfig
+ echo >> $kconfig "if $TARGET"
+ echo >> $kconfig
+
+ if [ "$cpu" != "-" -a "$arch" != "powerpc" ]; then
+ echo >> $kconfig "config SYS_CPU"
+ echo >> $kconfig " string"
+ if [ "$spl_cpu" != "$cpu" ]; then
+ echo >> $kconfig " default \"$spl_cpu\" if SPL_BUILD"
+ echo >> $kconfig " default \"$cpu\" if !SPL_BUILD"
+ else
+ echo >> $kconfig " default \"$cpu\""
+ fi
+ echo >> $kconfig
+ fi
+
+ if [ "$board" != "-" ]; then
+ echo >> $kconfig "config SYS_BOARD"
+ echo >> $kconfig " string"
+ echo >> $kconfig " default \"$board\""
+ echo >> $kconfig
+ fi
+
+ if [ "$vendor" != "-" ]; then
+ echo >> $kconfig "config SYS_VENDOR"
+ echo >> $kconfig " string"
+ echo >> $kconfig " default \"$vendor\""
+ echo >> $kconfig
+ fi
+
+ if [ "$soc" != "-" ]; then
+ echo >> $kconfig "config SYS_SOC"
+ echo >> $kconfig " string"
+ echo >> $kconfig " default \"$soc\""
+ echo >> $kconfig
+ fi
+
+ echo >> $kconfig "config SYS_CONFIG_NAME"
+ echo >> $kconfig " string"
+ echo >> $kconfig " default \"$config_name\""
+ echo >> $kconfig
+
+ echo >> $kconfig "endif"
+}
+
+sed -e 's/Orphan/Active/' -e 's/aarch64/arm/' -e '/#/d' -e '/^$/d' boards.cfg | \
+awk '$8 == "-" { $8 = $7 } { tmp = $7; $7 = $8; $8 = tmp; print }' | \
+sed -e 's/arm720t/arm0720t/' -e 's/arm920t/arm0920t/' \
+-e 's/arm926ejs/arm0926ejs/' -e 's/arm946t/arm0946t/' \
+-e 's/tegra20/tegra020/' -e 's/tegra30/tegra030/' | \
+tools/reformat.py -i -d '-' -s 8 | \
+sed -e 's/arm0720t/arm720t/' -e 's/arm0920t/arm920t/' \
+-e 's/arm0926ejs/arm926ejs/' -e 's/arm0946t/arm946t/' \
+-e 's/tegra020/tegra20/' -e 's/tegra030/tegra30/' |
+awk '{ tmp = $7; $7 = $8; $8 = tmp; print }' | \
+while read -r status arch cpu soc vendor board target options maintainers
+do
+
+ echo "processing $target"
+
+ # Tegra SoCs have different "cpu" and "spl_cpu"
+ spl_cpu=${cpu#*:}
+ cpu=${cpu%:*}
+
+ config_name=$target
+ extra_options=
+
+ [ "$options" != "-" ] && {
+ tmp="${options%:*}"
+ if [ "$tmp" ] ; then
+ config_name="$tmp"
+ fi
+
+ if [ "${tmp}" != "$options" ] ; then
+ extra_options=${options#*:}
+ fi
+ }
+
+ all_configs=$(tools/print_allconfigs $target)
+
+ if echo $all_configs | grep -q "CONFIG_SPL=y"; then
+ spl_enable=y
+ else
+ spl_enable=
+ fi
+
+ if echo $all_configs | grep -q "CONFIG_TPL=y"; then
+ tpl_enable=y
+ else
+ tpl_enable=
+ fi
+
+ if [ "$vendor" = "armltd" ]; then
+ prompt=$target
+ elif [ "$config_name" = "lacie_kw" -o "$config_name" = "spear3xx_evb" \
+ -o "$config_name" = "spear6xx_evb" ]; then
+ prompt=$board
+ else
+ if [ "${config_name^^}" = "${target^^}" ]; then
+ prompt=$target
+ else
+ prompt=$config_name
+ fi
+ fi
+
+ TARGET=$(echo TARGET_${prompt^^} | sed -e 's/-/_/g')
+
+ ARCH=$(get_arch $arch)
+ if [ "$arch" = powerpc ]; then
+ CPU=$(get_ppc_cpu $cpu)
+ fi
+ defconfig=configs/${target}_defconfig
+ write_defconfig
+
+ if [ "$board" = "-" ]; then
+ kconfig=board/$vendor/Kconfig
+ elif [ "$vendor" = "-" ]; then
+ kconfig=board/$board/Kconfig
+ else
+ kconfig=board/$vendor/$board/Kconfig
+ fi
+
+ if [ "$target" != "sandbox" -a \( "$vendor" = "armltd" -o \
+ "$config_name" != "$config_name_prev" -o "$board" != "$board_prev" \) ]; then
+ write_kconfig
+ if [ "$arch" = powerpc ]; then
+ arch_kconfig=arch/powerpc/cpu/$cpu/Kconfig
+ else
+ arch_kconfig=arch/$arch/Kconfig
+ fi
+
+ echo "source \"$kconfig\"" >> ${arch_kconfig}2
+ echo >> $arch_kconfig "config $TARGET"
+ echo >> $arch_kconfig " bool \"Support $prompt\""
+ echo >> $arch_kconfig
+ fi
+
+ config_name_prev=$config_name
+ board_prev=$board
+done
+
+for arch in $arch_list
+do
+if [ "$arch" != sandbox -a "$arch" != powerpc ]; then
+cat<<EOF >> arch/$arch/Kconfig
+endchoice
+
+EOF
+
+sort arch/$arch/Kconfig2 | uniq >> arch/$arch/Kconfig
+rm arch/$arch/Kconfig2
+
+fi
+
+cat<<EOF >> arch/$arch/Kconfig
+
+endmenu
+EOF
+
+done
+
+for cpu in $ppc_cpu_list
+do
+cat<<EOF >> arch/powerpc/cpu/$cpu/Kconfig
+endchoice
+
+EOF
+
+sort arch/powerpc/cpu/$cpu/Kconfig2 | uniq >> arch/powerpc/cpu/$cpu/Kconfig
+rm arch/powerpc/cpu/$cpu/Kconfig2
+
+cat<<EOF >> arch/powerpc/cpu/$cpu/Kconfig
+
+endmenu
+EOF
+
+done
+
+for i in $(find board -path "board/*/Kconfig")
+do
+ # dropping the empty line at the beginning
+ sed -e "1d" $i > $i.tmp
+ mv $i.tmp $i
+done
diff --git a/tools/print_allconfigs b/tools/print_allconfigs
new file mode 100755
index 0000000..e00c333
--- /dev/null
+++ b/tools/print_allconfigs
@@ -0,0 +1,77 @@
+#!/bin/sh
+# Print all config macros for specified board
+#
+# Usage: tools/getconfigs <board>
+
+# Specify your favoriate cross tools
+CROSS_COMPILE_ARC=arc-linux-
+CROSS_COMPILE_AARCH64=aarch64-linux-gnu-
+CROSS_COMPILE_ARM=arm-unknown-linux-gnueabi-
+CROSS_COMPILE_AVR32=avr32-linux-
+CROSS_COMPILE_BLACKFIN=bfin-elf-
+CROSS_COMPILE_M68K=m68k-linux-
+CROSS_COMPILE_MICROBLAZE=microblaze-linux-
+CROSS_COMPILE_MIPS=mips-linux-
+CROSS_COMPILE_NDS32=nds32le-linux-
+CROSS_COMPILE_NIOS2=nios2-linux-
+CROSS_COMPILE_OPENRISC=or32-linux-
+CROSS_COMPILE_POWERPC=powerpc-linux-
+CROSS_COMPILE_SH=sh4-gentoo-linux-gnu-
+CROSS_COMPILE_SPARC=sparc-elf-
+CROSS_COMPILE_X86=i386-linux-
+
+if [ ! -r boards.cfg ]; then
+ echo >&2 "boards.cfg: not found"
+ echo >&2 "Run \"tools/print_allconfigs <target_board>\" at the top directory"
+ echo >&2 "Exit."
+ exit 1
+fi
+
+if [ $# != 1 ]; then
+ echo >&2 "Usage: tools/print_allconfigs <target_board>"
+ echo >&2 "Exit."
+ exit 2
+fi
+
+target=$1
+
+
+get_arch() {
+ local target=$1
+
+ awk '$7 == "'$target'" { print $2 }' boards.cfg
+}
+
+arch=$(get_arch $target)
+
+if [ -z "$arch" ]; then
+ echo >&2 "$target: target board not found in boards.cfg"
+ echo >&2 "Exit."
+ exit 3
+fi
+
+ARCH=$(echo $arch | tr '[:lower:]' '[:upper:]')
+
+eval CROSS_COMPILE=\$CROSS_COMPILE_$ARCH
+
+export CROSS_COMPILE
+
+rm -f include/autoconf.mk
+
+make ${target}_config include/autoconf.mk >/dev/null || { \
+ echo >&2 "make failed."
+ echo >&2 "Please check if CROSS_COMPILE_<ARCH> is correctly set."
+ echo >&2 "Exit."
+ exit 4
+}
+
+if [ ! -f include/autoconf.mk ]; then
+ echo >&2 "include/autoconf.mk: not found."
+ echo >&2 "Internal error."
+ echo >&2 "Exit."
+ exit 5
+fi
+
+cat include/autoconf.mk
+
+exit 0
--
1.9.1
More information about the U-Boot
mailing list