[U-Boot] [PATCH] powerpc/b4860: Updated default hwconfig so as to enable only CPC2

Shaveta Leekha shaveta at freescale.com
Wed Jul 2 08:13:35 CEST 2014


CPC1 is not being enabled by default as powerpc is supposed to
use only CPC2.

Signed-off-by: Shaveta Leekha <shaveta at freescale.com>
Signed-off-by: Sandeep Singh <Sandeep at freescale.com>
---
 include/configs/B4860QDS.h |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 1af9ba6..53fdac7 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -820,8 +820,14 @@ unsigned long get_board_ddr_clk(void);
 
 #define __USB_PHY_TYPE	ulpi
 
+#ifdef CONFIG_PPC_B4860
+#define HWCONFIG	"hwconfig=fsl_ddr:ctlr_intlv=null,en_cpc:cpc2,"
+#else
+#define	HWCONFIG	"hwconfig=fsl_ddr:ctlr_intlv=null,"
+#endif
+
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=null,"		\
+	HWCONFIG						\
 	"bank_intlv=cs0_cs1;"					\
 	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
-- 
1.7.6.GIT



More information about the U-Boot mailing list