[U-Boot] [PATCH] ARM: imx: fsl_esdhc: fix usage of low 4 bits of sysctl register
Hector Palacios
hector.palacios at digi.com
Fri Dec 4 19:39:24 CET 2015
Hi,
On 12/04/2015 06:32 PM, Eric Nelson wrote:
> The low four bits of the SYSCTL register are reserved on the USDHC
> controller on i.MX6 and i.MX7 processors, but are used for clocking
> operations on earlier models.
>
> Guard against their usage by hiding the bit mask macros on those
> processors.
>
> These bits are used to prevent glitches when changing clocks on
> i.MX35 et al. Use the RSTA bit instead for i.MX6 and i.MX7.
>
> From the i.MX6DQ RM:
> To prevent possible glitch on the card clock, clear the
> FRC_SDCLK_ON bit when changing clock divisor value(SDCLKFS
> or DVS in System Control Register) or setting RSTA bit.
>
> Signed-off-by: Eric Nelson <eric at nelint.com>
> ---
> drivers/mmc/fsl_esdhc.c | 15 +++++++++++++--
> include/fsl_esdhc.h | 2 ++
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index c5054d6..1ccc576 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -502,15 +502,22 @@ static void set_sysctl(struct mmc *mmc, uint clock)
>
> clk = (pre_div << 8) | (div << 4);
>
> +#ifdef CONFIG_FSL_USDHC
> + esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
> +#else
> esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
> +#endif
>
> esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
>
> udelay(10000);
>
> - clk = SYSCTL_PEREN | SYSCTL_CKEN;
> +#ifdef CONFIG_FSL_USDHC
> + esdhc_clrbits32(®s->sysctl, SYSCTL_RSTA);
> +#else
> + esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
> +#endif
>
> - esdhc_setbits32(®s->sysctl, clk);
> }
>
> #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
> @@ -585,7 +592,9 @@ static int esdhc_init(struct mmc *mmc)
> esdhc_write32(®s->scr, 0x00000040);
> #endif
>
> +#ifndef CONFIG_FSL_USDHC
> esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
> +#endif
>
> /* Set the initial clock speed */
> mmc_set_clock(mmc, 400000);
> @@ -657,8 +666,10 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
> /* First reset the eSDHC controller */
> esdhc_reset(regs);
>
> +#ifndef CONFIG_FSL_USDHC
> esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
> | SYSCTL_IPGEN | SYSCTL_CKEN);
> +#endif
>
> writel(SDHCI_IRQ_EN_BITS, ®s->irqstaten);
> memset(&cfg->cfg, 0, sizeof(cfg->cfg));
> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
> index aa1b4cf..a4b87ce 100644
> --- a/include/fsl_esdhc.h
> +++ b/include/fsl_esdhc.h
> @@ -25,10 +25,12 @@
> #define SYSCTL_INITA 0x08000000
> #define SYSCTL_TIMEOUT_MASK 0x000f0000
> #define SYSCTL_CLOCK_MASK 0x0000fff0
> +#if !defined(CONFIG_MX6)
Per your commit message should this be
#if (!defined(CONFIG_MX6) && !defined(CONFIG_MX7))
> #define SYSCTL_CKEN 0x00000008
> #define SYSCTL_PEREN 0x00000004
> #define SYSCTL_HCKEN 0x00000002
> #define SYSCTL_IPGEN 0x00000001
> +#endif
> #define SYSCTL_RSTA 0x01000000
> #define SYSCTL_RSTC 0x02000000
> #define SYSCTL_RSTD 0x04000000
>
--
Hector Palacios
More information about the U-Boot
mailing list