[U-Boot] [GIT PULL] Xilinx fixes for v2018.01-rc2
Michal Simek
monstr at monstr.eu
Fri Dec 15 14:33:44 UTC 2017
Hi Tom, +Stephen
please pull these changes to your tree. Travis is not showing any issue.
https://travis-ci.org/michalsimek-test/u-boot/builds/316577925
Buildman was also fine over all patches and tests on board looks good too.
I have included one patch from Stephen which we discussed for fixing
zynq_cse_qspi configuration which doesn't use HUSH.
Thanks,
Michal
The following changes since commit 659208da4703de50826a469cbb38bf6afb938978:
README: update the kernel coding style reference (2017-12-12 21:34:10
-0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2018.01-rc2
for you to fetch changes up to 956a1340c8677e96f9eb364fb0070c152d591a4a:
test/py: Setup variables based on HUSH selection (2017-12-14 20:09:04
+0100)
----------------------------------------------------------------
Xilinx changes for v2018.01-rc2
fpga:
- Enable loading bitstream via fit image for !xilinx platforms
zynq:
- Fix SPL SD boot mode
zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues
test:
- Fix env test for !hush case - Stephen's patch
----------------------------------------------------------------
Goldschmidt Simon (1):
fpga: allow programming fpga from FIT image for all FPGA drivers
Javier Martinez Canillas (1):
arm64: zynqmp: Add generic compatible string for I2C EEPROM
Michal Simek (19):
arm: zynq: Fix SPL SD boot mode
arm64: zynqmp: Do not perform reset in case of panic
arm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocator
arm64: zynqmp: Add reference to pmu firmware node
arm64: zynqmp: Add support for generic QSPI boot
arm64: zynqmp: Enable SPL_CLK when SPL is enabled
arm64: zynqmp: Setup modeboot variable based on bootmode
arm64: zynqmp: Enable phys for zcu102
arm64: zynqmp: Enable clock command for all boards
arm64: zynqmp: Remove undocumented dma properties
arm64: zynqmp: Use only earlycon bootargs instead of full one
arm64: zynqmp: Add missing zynq_board_read_rom_ethaddr() prototype
arm64: zynqmp: Add support for zynqmp automotive silicons
arm64: zynqmp: Enable misc devices
arm64: zynqmp: Enable SPL ram support
arm64: zynqmp: Enable fpga bitstream loading
arm64: zynqmp: Enable AES command
arm64: zynqmp: Enable spi flashes
tools: zynqmpimage: Check return values from file functions
Siva Durga Prasad Paladugu (3):
arm64: zynqmp: Read boot mode register using zynqmp_mmio_read
arm64: zynqmp: Dont use 4K sector erase by default for spi-flashes
arm64: zynqmp: Access timestamp_ref_ctrl register only if running
in el3
Stephen Warren (1):
test/py: Setup variables based on HUSH selection
arch/arm/Kconfig | 2 +-
arch/arm/dts/zynqmp-ep108.dts | 4 ++--
arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 9 ---------
arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts | 9 ---------
arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts | 9 ---------
arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts | 11 +----------
arch/arm/dts/zynqmp-zcu102-revA.dts | 20 +++++++++++---------
arch/arm/dts/zynqmp.dtsi | 3 ++-
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 1 +
board/xilinx/zynqmp/zynqmp.c | 23
+++++++++++++++++++----
common/bootm.c | 2 +-
common/image.c | 6 ++----
configs/syzygy_hub_defconfig | 2 ++
configs/topic_miami_defconfig | 2 ++
configs/topic_miamilite_defconfig | 2 ++
configs/topic_miamiplus_defconfig | 2 ++
configs/xilinx_zynqmp_ep_defconfig | 7 ++++++-
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 10 +++++++++-
configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 8 +++++++-
configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 15 ++++++++++++++-
configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig | 8 +++++++-
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 10 +++++++++-
configs/xilinx_zynqmp_zcu102_revA_defconfig | 10 +++++++++-
configs/xilinx_zynqmp_zcu102_revB_defconfig | 10 +++++++++-
configs/zynq_cc108_defconfig | 2 ++
configs/zynq_cse_qspi_defconfig | 2 ++
configs/zynq_microzed_defconfig | 2 ++
configs/zynq_picozed_defconfig | 2 ++
configs/zynq_z_turn_defconfig | 2 ++
configs/zynq_zc702_defconfig | 2 ++
configs/zynq_zc706_defconfig | 2 ++
configs/zynq_zc770_xm010_defconfig | 2 ++
configs/zynq_zc770_xm011_defconfig | 2 ++
configs/zynq_zc770_xm012_defconfig | 2 ++
configs/zynq_zc770_xm013_defconfig | 2 ++
configs/zynq_zed_defconfig | 2 ++
configs/zynq_zybo_defconfig | 2 ++
drivers/fpga/fpga.c | 9 +++++++++
drivers/fpga/xilinx.c | 13 +++++++++++++
include/configs/xilinx_zynqmp.h | 16 +++++++++++++---
include/configs/zynq-common.h | 7 ++-----
include/fpga.h | 1 +
test/py/tests/test_env.py | 11 ++++++++++-
tools/zynqmpimage.c | 32
+++++++++++++++++++++++++++-----
44 files changed, 219 insertions(+), 81 deletions(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171215/2b2231e4/attachment.sig>
More information about the U-Boot
mailing list