[U-Boot] [PATCH v3 4/8] armv8: Add workaround for USB erratum A-009007
Suresh Gupta
suresh.gupta at nxp.com
Fri Feb 3 14:09:34 UTC 2017
Rx Compliance tests may fail intermittently at high
jitter frequencies using default register values
Changes identified in test setup makes the Rx compliance test pass
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta at nxp.com>
---
Changes in v2:
Clean up the code after Scott comments,
Previously in v1, we was defining the pointer as u32,
then casting it to u8, and then passing it to
a 16-bit accessor.
Changes in v3:
Change CONFIG_XXX to CONFIG_ARCH_XXX
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 ++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 42 ++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 9 +++++
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 +++++
4 files changed, 66 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index d5d6040..a27e310 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -25,6 +25,7 @@ config ARCH_LS1043A
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
@@ -46,6 +47,7 @@ config ARCH_LS1046A
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
select SYS_FSL_HAS_DDR4
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
@@ -77,6 +79,7 @@ config ARCH_LS2080A
select SYS_FSL_ERRATUM_A009008
select SYS_FSL_ERRATUM_A009798
select SYS_FSL_ERRATUM_A008997
+ select SYS_FSL_ERRATUM_A009007
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
@@ -167,6 +170,9 @@ config SYS_FSL_ERRATUM_A009798
config SYS_FSL_ERRATUM_A008997
bool "Workaround for USB PHY erratum A008997"
+config SYS_FSL_ERRATUM_A009007
+ bool "Workaround for USB PHY erratum A009007"
+
config MAX_CPUS
int "Maximum number of CPUs permitted for Layerscape"
default 4 if ARCH_LS1043A
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index c56cb72..9aab8a7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -120,6 +120,46 @@ static void erratum_a008997(void)
#endif
#endif /* CONFIG_SYS_FSL_ERRATUM_A008997 */
}
+static void erratum_a009007(void)
+{
+/* TODO:implement the out_be16 instead of writew which is taking
+little endian style */
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+ void __iomem *usb_phy = (void __iomem *)USB_PHY1;
+ writew(USB_PHY_RX_EQ_VAL_1, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_2, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_3, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_4, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ usb_phy = (void __iomem *)USB_PHY2;
+ writew(USB_PHY_RX_EQ_VAL_1, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_2, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_3, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_4, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ usb_phy = (void __iomem *)USB_PHY3;
+ writew(USB_PHY_RX_EQ_VAL_1, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_2, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_3, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_4, usb_phy + USB_PHY_RX_OVRD_IN_HI);
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS2085A)
+ void __iomem *dcsr = (void __iomem *)DCSR_BASE;
+ writew(USB_PHY_RX_EQ_VAL_1,
+ dcsr + DCSR_USB_PHY1 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_2,
+ dcsr + DCSR_USB_PHY1 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_3,
+ dcsr + DCSR_USB_PHY1 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_4,
+ dcsr + DCSR_USB_PHY1 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_1,
+ dcsr + DCSR_USB_PHY2 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_2,
+ dcsr + DCSR_USB_PHY2 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_3,
+ dcsr + DCSR_USB_PHY2 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+ writew(USB_PHY_RX_EQ_VAL_4,
+ dcsr + DCSR_USB_PHY2 + DCSR_USB_PHY_RX_OVRD_IN_HI);
+#endif /* CONFIG_SYS_FSL_ERRATUM_A009007 */
+}
#if defined(CONFIG_FSL_LSCH3)
/*
@@ -266,6 +306,7 @@ void fsl_lsch3_early_init_f(void)
erratum_a009008();
erratum_a009798();
erratum_a008997();
+ erratum_a009007();
#ifdef CONFIG_CHAIN_OF_TRUST
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
@@ -536,6 +577,7 @@ void fsl_lsch2_early_init_f(void)
erratum_a009008();
erratum_a009798();
erratum_a008997();
+ erratum_a009007();
}
#endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index 2e52078..2dacdb4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -347,6 +347,15 @@ struct ccsr_gur {
#define USB_TXVREFTUNE 0x9
#define USB_SQRXTUNE 0xFC7FFFFF
#define USB_PCSTXSWINGFULL 0x47
+#define USB_PHY1 0x084F0000
+#define USB_PHY2 0x08500000
+#define USB_PHY3 0x08510000
+#define USB_PHY_RX_OVRD_IN_HI 0x200c
+/* TODO : make it generic */
+#define USB_PHY_RX_EQ_VAL_1 0x0000
+#define USB_PHY_RX_EQ_VAL_2 0x8000
+#define USB_PHY_RX_EQ_VAL_3 0x8003
+#define USB_PHY_RX_EQ_VAL_4 0x800b
#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 3106ed3..819172e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -133,6 +133,15 @@
#define USB_TXVREFTUNE 0x9
#define USB_SQRXTUNE 0xFC7FFFFF
#define USB_PCSTXSWINGFULL 0x47
+#define DCSR_BASE 0x700000000ULL
+#define DCSR_USB_PHY1 0x4600000
+#define DCSR_USB_PHY2 0x4610000
+#define DCSR_USB_PHY_RX_OVRD_IN_HI 0x1006
+#define USB_PHY_RX_EQ_VAL_1 0x0000
+#define USB_PHY_RX_EQ_VAL_2 0x0080
+#define USB_PHY_RX_EQ_VAL_3 0x0380
+#define USB_PHY_RX_EQ_VAL_4 0x0b80
+
#define SCFG_QSPICLKCTLR 0x10
#define TP_ITYP_AV 0x00000001 /* Initiator available */
--
1.9.3
More information about the U-Boot
mailing list