[U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support
Lukasz Majewski
lukma at denx.de
Tue Jan 2 08:52:38 UTC 2018
Hi Lokesh,
> Hi Lukas,
>
> Sorry for the delayed response.
No problem :-). Happy new year :-)
>
> On Tuesday 19 December 2017 03:04 PM, Lukasz Majewski wrote:
> > Hi Lokesh,
> >
> >> Hi Lukas,
> >>
> >> On Monday 18 December 2017 04:46 PM, Lukasz Majewski wrote:
> >>> Hi Lokesh,
> >>>
> >>>> AM574x-idk has the following DDR parts attached:
> >>>> EMIF1: MT41K256M16HA (1GB with ECC)
> >>>> EMIF2: MT41K256M16HA (1GB without ECC)
> >>>>
> >>>> Enabling 2GB DDR without interleaving between EMIFs. And
> >>>> enabling ECC on EMIF1.
> >>>>
> >>>> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
> >>>> Signed-off-by: Krunal Bhargav <k-bhargav at ti.com>
> >>>> ---
> >>>> board/ti/am57xx/board.c | 47
> >>>> ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed,
> >>>> 44 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
> >>>> index 2d14ae54fe..1377c7b1fe 100644
> >>>> --- a/board/ti/am57xx/board.c
> >>>> +++ b/board/ti/am57xx/board.c
> >>>> @@ -89,10 +89,18 @@ static const struct dmm_lisa_map_regs
> >>>> am571x_idk_lisa_regs = { .is_ma_present = 0x1
> >>>> };
> >>>>
> >>>> +static const struct dmm_lisa_map_regs am574x_idk_lisa_regs = {
> >>>> + .dmm_lisa_map_2 = 0xc0600200,
> >>>> + .dmm_lisa_map_3 = 0x80600100,
> >>>> + .is_ma_present = 0x1
> >>>> +};
> >>>> +
> >>>> void emif_get_dmm_regs(const struct dmm_lisa_map_regs
> >>>> **dmm_lisa_regs) {
> >>>> if (board_is_am571x_idk())
> >>>> *dmm_lisa_regs = &am571x_idk_lisa_regs;
> >>>> + else if (board_is_am574x_idk())
> >>>> + *dmm_lisa_regs = &am574x_idk_lisa_regs;
> >>>> else
> >>>> *dmm_lisa_regs = &beagle_x15_lisa_regs;
> >>>> }
> >>>> @@ -231,8 +239,8 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .ref_ctrl =
> >>>> 0x0000514d, .ref_ctrl_final =
> >>>> 0x0000144a, .sdram_tim1 = 0xd333887c,
> >>>> - .sdram_tim2 = 0x40b37fe3,
> >>>> - .sdram_tim3 = 0x409f8ada,
> >>>> + .sdram_tim2 = 0x30b37fe3,
> >>>> + .sdram_tim3 = 0x409f8ad8,
> >>>> .read_idle_ctrl = 0x00050000,
> >>>> .zq_config = 0x5007190b,
> >>>> .temp_alert_config = 0x00000000,
> >>>> @@ -249,17 +257,50 @@ static const struct emif_regs
> >>>> am571x_emif1_ddr3_666mhz_emif_regs =
> >>>> { .emif_rd_wr_exec_thresh = 0x00000305 };
> >>>>
> >>>> +static const struct emif_regs
> >>>> am574x_emif1_ddr3_666mhz_emif_ecc_regs = {
> >>>> + .sdram_config_init = 0x61863332,
> >>>> + .sdram_config = 0x61863332,
> >>>> + .sdram_config2 = 0x08000000,
> >>>> + .ref_ctrl = 0x0000514d,
> >>>> + .ref_ctrl_final = 0x0000144a,
> >>>> + .sdram_tim1 = 0xd333887c,
> >>>> + .sdram_tim2 = 0x30b37fe3,
> >>>> + .sdram_tim3 = 0x409f8ad8,
> >>>> + .read_idle_ctrl = 0x00050000,
> >>>> + .zq_config = 0x5007190b,
> >>>> + .temp_alert_config = 0x00000000,
> >>>> + .emif_ddr_phy_ctlr_1_init = 0x0024400f,
> >>>> + .emif_ddr_phy_ctlr_1 = 0x0e24400f,
> >>>> + .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
> >>>> + .emif_ddr_ext_phy_ctrl_2 = 0x00910091,
> >>>> + .emif_ddr_ext_phy_ctrl_3 = 0x00950095,
> >>>> + .emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
> >>>> + .emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
> >>>> + .emif_rd_wr_lvl_rmp_win = 0x00000000,
> >>>> + .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
> >>>> + .emif_rd_wr_lvl_ctl = 0x00000000,
> >>>> + .emif_rd_wr_exec_thresh = 0x00000305,
> >>>> + .emif_ecc_ctrl_reg = 0xD0000001,
> >>>> + .emif_ecc_address_range_1 = 0x3FFF0000,
> >>>> + .emif_ecc_address_range_2 = 0x00000000
> >>>> +};
> >>>
> >>> I'm wondering if it would be possible to:
> >>>
> >>> Embed this memory setup (even as binary blob) to SPL FIT -> Those
> >>> values are generated from TI supplied excel sheet (when memory
> >>> details are provided).
> >>>
> >>>
> >>> Pros:
> >>> ----
> >>>
> >>> - Since the same EMIF controller is used, one could only adjust
> >>> the binary blob, when new memory (faster, slower, from other
> >>> manufacturer) is used in the product.
> >>>
> >>> - There would be no need to add such code to the board file.
> >>
> >> yeah, ddr is not the only thing that comes in this bucket, PMIC
> >> data as well can be also made in similar way. I mean all the board
> >> related information can be moved out.
> >
> > I think that the EMIF controller configuration is a bit special.
> >
> > As you pointed out - for the whole AM57xx family one EMIF controller
> > type is used.
> >
> >> But then the binary size will still
> >> remain the same.
> >
> > The goal here would be to not make the binary smaller, but reducing
> > the maintanence effort.
> >
> > Example use case - company X has a product. They are using single
> > u-boot (with SPL and dts). The only thing, which they need to
> > change is the data needed for setting up proper memory
> > configuration (DDR2/DDR3, speed - 1500, 1333, ECC enabled/disabled,
> > module size, etc). This all is done in EMIF.
> >
> > With separate EMIF blob configuration they don't need to rebuild
> > u-boot
> > - they only change memory configuration binary data.
> >
> > This data has a separate room in the non-volatile memory (e.g.
> > SPI-NOR flash).
> >
> >> Also, we will need a new driver to parse these new
> >> binary formats.
> >
> > EMIF configuration data is IIRC 128 B at most. It is even possible
> > to copy 1:1 the binary data to EMIF (as it is now done in the
> > u-boot code).
> >
> > Hence, the "driver" would boil down to "memcpy".
>
>
> Agreed. This should be doable. Tom, do you have any comments on this
> new sequence?
Ok. Lets wait for Tom's opinion.
>
>
> On a side node, I will post a v2 for this series with the existing
> data. Cleanup can be done for the entire supported boards once the
> above discussion is concluded.
>
>
> Thanks and regards,
> Lokesh
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180102/08e4f552/attachment.sig>
More information about the U-Boot
mailing list