January 2018 Archives by author
Starting: Mon Jan 1 13:29:25 UTC 2018
Ending: Wed Jan 31 23:43:07 UTC 2018
Messages: 3715
- [U-Boot] How to specify new file size and CRC32 checksum for modified Linux Kernel Image?
A.W.C.
- [U-Boot] How to specify new file size and CRC32 checksum for modified Linux Kernel Image?
A.W.C.
- [U-Boot] [PATCH v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM
Faiz Abbas
- [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
Faiz Abbas
- [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
Faiz Abbas
- [U-Boot] [PATCH 0/2] Fix QSPI boot on am43xx_idk
Faiz Abbas
- [U-Boot] [PATCH 1/2] configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE
Faiz Abbas
- [U-Boot] [PATCH 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl
Faiz Abbas
- [U-Boot] [PATCH] am33xx: board: Call spl_early_init() to support sdram_init()
Faiz Abbas
- [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
Stefan Agner
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefan Agner
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefan Agner
- [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Stefan Agner
- [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER
Stefan Agner
- [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL
Stefan Agner
- [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Stefan Agner
- [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER
Stefan Agner
- [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL
Stefan Agner
- [U-Boot] [PATCH v2 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Stefan Agner
- [U-Boot] [PATCH v2 2/3] imx: introduce CONFIG_GPT_TIMER
Stefan Agner
- [U-Boot] [PATCH v2 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL
Stefan Agner
- [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
Stefan Agner
- [U-Boot] [PATCH] arm: dts: imx6ull: move input include to base device tree
Stefan Agner
- [U-Boot] [PATCH 1/4] mtd: nand: mxs_nand: use self init
Stefan Agner
- [U-Boot] [PATCH 2/4] mtd: nand: mxs_nand: allow to enable BBT support
Stefan Agner
- [U-Boot] [PATCH 3/4] mtd: nand: mxs_nand: use structure for BCH geometry
Stefan Agner
- [U-Boot] [PATCH 4/4] mtd: nand: mxs_nand: add minimal ECC support
Stefan Agner
- [U-Boot] Uboot as x86_64 EFI payload
Juan Alfonso Reyes Ajenjo
- [U-Boot] Raspberry Pi USB storage broken after 64 byte device descriptor patch
Kristian Amlie
- [U-Boot] [PATCH] travis.yml: Support RISC-V
Andes
- [U-Boot] [PATCH] boards: amlogic: khadas-vim: Typo fixup
Neil Armstrong
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Auer, Lukas
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Auer, Lukas
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Auer, Lukas
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Lukas Auer
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Auer, Lukas
- [U-Boot] [PATCH v2 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Auer, Lukas
- [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG
Auer, Lukas
- [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG
Auer, Lukas
- [U-Boot] [RESEND PATCH v3 2/2] imx: mx7: run sec_init for CAAM RNG
Auer, Lukas
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Auer, Lukas
- [U-Boot] U-boot on Acer Chromebook R13
Arthur Autin
- [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board
Stefano Babic
- [U-Boot] [PATCH] mx6: Add board mx6memcal for use in validating DDR
Stefano Babic
- [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
Stefano Babic
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefano Babic
- [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
Stefano Babic
- [U-Boot] [PATCH V2] pci: imx: request gpio before use
Stefano Babic
- [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board
Stefano Babic
- [U-Boot] [PATCH V2] mx6: Support SKS-Kinkel sksimx6 Board
Stefano Babic
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Stefano Babic
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefano Babic
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Stefano Babic
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Stefano Babic
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Stefano Babic
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefano Babic
- [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Stefano Babic
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env
Stefano Babic
- [U-Boot] [PATCH 1/7] ARM: imx: Introduce dts for i.MX6SX-SDB
Stefano Babic
- [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
Stefano Babic
- [U-Boot] [PATCH V2 1/2] spi: fsl_qspi: support i.MX6UL/6ULLL/7D
Stefano Babic
- [U-Boot] [PATCH V2 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver
Stefano Babic
- [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL
Stefano Babic
- [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL
Stefano Babic
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL
Stefano Babic
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL
Stefano Babic
- [U-Boot] [PATCH] misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
Stefano Babic
- [U-Boot] [PATCH 1/3] mx6memcal: Fix the UART ports for mx6sabresd/auto boards
Stefano Babic
- [U-Boot] [PATCH 2/3] mx6memcal: spl: Also take i.MX6ULL into account
Stefano Babic
- [U-Boot] [PATCH 3/3] mx6memcal: spl: Disambiguate the error message
Stefano Babic
- [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env
Stefano Babic
- [U-Boot] [PATCH 2/2] ARM: imx: cm_fx6: env: try to determine dtb to use
Stefano Babic
- [U-Boot] [PATCH] drivers: pci: imx: fix enumeration logic error
Stefano Babic
- [U-Boot] [PATCH v6 01/25] arm: imx: hab: Make authenticate_image return int
Stefano Babic
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Stefano Babic
- [U-Boot] FW: u-boot v2016 vs v2013
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Stefano Babic
- [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig
Stefano Babic
- [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin header file
Stefano Babic
- [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file
Stefano Babic
- [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver
Stefano Babic
- [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper
Stefano Babic
- [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu
Stefano Babic
- [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse
Stefano Babic
- [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c
Stefano Babic
- [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support
Stefano Babic
- [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device
Stefano Babic
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Stefano Babic
- [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Stefano Babic
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Stefano Babic
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Pankaj Bansal
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Pankaj Bansal
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Pankaj Bansal
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Pankaj Bansal
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Pankaj Bansal
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Pankaj Bansal
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Pankaj Bansal
- [U-Boot] [U-Boot, v2, 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi drivers
Liam Beguin
- [U-Boot] [PATCH 3/4] fs: btrfs: Fix printf format character warning
Marek Behun
- [U-Boot] [PATCH v2 3/4] fs: btrfs: Fix printf format character warning
Marek Behun
- [U-Boot] btrfs: data abort with lzo compression (armv7/am335x)
Marek Behún
- [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses
Marek Behún
- [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation
Karl Beldan
- [U-Boot] [PATCH] arm64 :show_regs: show the real hardware register even after relocation
Karl Beldan
- [U-Boot] [PATCH] sunxi: Fix display timing flags
Giulio Benetti
- [U-Boot] [PATCH v8 00/11] Add VID support for QDS and RDB platforms
Rajesh Bhagat
- [U-Boot] [PATCH v8 01/11] armv8: lsch3: Add serdes and DDR voltage setup
Rajesh Bhagat
- [U-Boot] [PATCH v8 02/11] board: common:vid: Add LS1088A VID Supported voltage values
Rajesh Bhagat
- [U-Boot] [PATCH v8 03/11] board: common: vid: Add board specific vdd adjust API
Rajesh Bhagat
- [U-Boot] [PATCH v8 04/11] board: common: vid: Move IR chip specific code in flag
Rajesh Bhagat
- [U-Boot] [PATCH v8 05/11] Kconfig: Add LTC3882 voltage regulator config
Rajesh Bhagat
- [U-Boot] [PATCH v8 06/11] board: common: vid: Add support for LTC3882 voltage regulator chip
Rajesh Bhagat
- [U-Boot] [PATCH v8 07/11] ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
Rajesh Bhagat
- [U-Boot] [PATCH v8 08/11] ls1088a: ddr: configure DDR for 0.9v for VID support
Rajesh Bhagat
- [U-Boot] [PATCH v8 09/11] common: board_f: vid: Add VID specific API to adjust core voltage
Rajesh Bhagat
- [U-Boot] [PATCH v8 10/11] ls1088a: Add VID support for QDS and RDB platforms
Rajesh Bhagat
- [U-Boot] [PATCH v8 11/11] armv8: ls1088a: vid: Compiling VID specific functions for SPL
Rajesh Bhagat
- [U-Boot] using raw eMMC
Bishop, Mark (STRT)
- [U-Boot] extract size of FIT image
Bishop, Mark (STRT)
- [U-Boot] SquashFS and FIT images
Bishop, Mark (STRT)
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Chris Blake
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Chris Blake
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Chris Blake
- [U-Boot] [PATCH] atomic-long: Fix warnings on arm64
Bradley Bolen
- [U-Boot] [PATCH v2] arm: add support for PDU001
Felix Brack
- [U-Boot] [PATCH v2] arm: add support for PDU001
Felix Brack
- [U-Boot] [PATCH v3] arm: add support for PDU001
Felix Brack
- [U-Boot] [PATCH v4] arm: add support for PDU001
Felix Brack
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Chris Brandt
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Chris Brandt
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Chris Brandt
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Chris Brandt
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Chris Brandt
- [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value
Boris Brezillon
- [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning
Boris Brezillon
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Boris Brezillon
- [U-Boot] [PATCH 8/8] sunxi: dts: Enable NAND on NES classic
Boris Brezillon
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Boris Brezillon
- [U-Boot] [PATCH] ARC: devboards: Allow huge uImages (up to 128 MiB)
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()
Alexey Brodkin
- [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree
Alexey Brodkin
- [U-Boot] [PATCH] board_f: Only reserve memory for U-Boot if we're going to relocate
Alexey Brodkin
- [U-Boot] [PATCH] arc: Get rid of handwritten string routines
Alexey Brodkin
- [U-Boot] [PATCH] arc: Don't halt slaves
Alexey Brodkin
- [U-Boot] [PATCH] arc: Eliminate unused code and data with GCC's garbage collector
Alexey Brodkin
- [U-Boot] [PATCH] arc: Introduce a possibility to not relocate U-boot
Alexey Brodkin
- [U-Boot] [PATCH] part: Allocate only one legacy_mbr buffer
Alexey Brodkin
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Alexey Brodkin
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Alexey Brodkin
- [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
Paul Burton
- [U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes
Paul Burton
- [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
Paul Burton
- [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
Patrice CHOTARD
- [U-Boot] STM32F746 Discovery - No serial output?
Patrice CHOTARD
- [U-Boot] board: stm32: Fix stm32f746-disco boot
Patrice CHOTARD
- [U-Boot] [PATCH] rockchip: rk3036: enable rockusb support on rk3036 based device
Eddie Cai
- [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Julian Calaby
- [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Julian Calaby
- [U-Boot] UDP packet sender
Gaëtan Carlier
- [U-Boot] UDP packet sender
Gaëtan Carlier
- [U-Boot] UDP packet sender
Gaëtan Carlier
- [U-Boot] UDP packet sender
Gaëtan Carlier
- [U-Boot] [U-Boot,1/1] efi_loader: fix building crt0 on arm
Vagrant Cascadian
- [U-Boot] [PATCH v6 0/2] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [PATCH v6 0/2] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [PATCH v6 0/2] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [PATCH v6 0/2] Generic firmware loader
Chee, Tien Fong
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Chee, Tien Fong
- [U-Boot] [PATCH 0/2] Android and arm64 improvement
Bin Chen
- [U-Boot] [PATCH 1/2] parse the second area of android image
Bin Chen
- [U-Boot] [PATCH 2/2] move booti_setup to arch/arm/lig/image.c
Bin Chen
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Jaehoon Chung
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Jaehoon Chung
- [U-Boot] u-boot/next and HS MMC patches
Jaehoon Chung
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Jaehoon Chung
- [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support
Jaehoon Chung
- [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Jaehoon Chung
- [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support
Jaehoon Chung
- [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes
Jaehoon Chung
- [U-Boot] [PATCH 2/2] ARM: dts: exynos5: add the interrupt-parent property
Jaehoon Chung
- [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
Jaehoon Chung
- [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
Jaehoon Chung
- [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
Jaehoon Chung
- [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
Jaehoon Chung
- [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
Jaehoon Chung
- [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
Jaehoon Chung
- [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support
Jaehoon Chung
- [U-Boot] mmc1 not working on Samsung snow chromebook
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Jaehoon Chung
- [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock
Jaehoon Chung
- [U-Boot] [PATCH v2 6/7] mmc: zynq_sdhci: Add support for SD3.0
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Jaehoon Chung
- [U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller
Jaehoon Chung
- [U-Boot] [PATCH V4 30/32] power: pmic/regulator allow dm be omitted by SPL
Jaehoon Chung
- [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL
Jaehoon Chung
- [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Jaehoon Chung
- [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jaehoon Chung
- [U-Boot] [PATCH 0/8] mmc: some fixes for core and add HS200 support for sdhci-cadence
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Jaehoon Chung
- [U-Boot] [PATCH v2] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Jaehoon Chung
- [U-Boot] [PATCH V2 3/4] mmc: fsl_esdhc: support SDR104 and HS200
Jaehoon Chung
- [U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: add strobe and tuning entry
Jaehoon Chung
- [U-Boot] u-boot-mmc fails on almost every Tegra board
Jaehoon Chung
- [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jaehoon Chung
- [U-Boot] u-boot-mmc fails on almost every Tegra board
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling
Jaehoon Chung
- [U-Boot] u-boot-mmc fails on almost every Tegra board
Jaehoon Chung
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Jaehoon Chung
- [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
Jaehoon Chung
- [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
Jaehoon Chung
- [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
Jaehoon Chung
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jaehoon Chung
- [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off
Jaehoon Chung
- [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time
Jaehoon Chung
- [U-Boot] [PATCH v3 11/15] env: mmc: depends on the MMC framework
Jaehoon Chung
- [U-Boot] [PATCH v3 07/15] env: mmc: Make the debug messages play a little nicer
Jaehoon Chung
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
- [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Jaehoon Chung
- [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()
Jaehoon Chung
- [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig
Jaehoon Chung
- [U-Boot] [PATCH 1/3] configs: trats2: enable the max77686 regulator config
Jaehoon Chung
- [U-Boot] [PATCH 2/3] power: pmic_max77686: remove the old pmic_max77686 file
Jaehoon Chung
- [U-Boot] [PATCH 3/3] lib: fdtdec: drop the old compatible about max77686
Jaehoon Chung
- [U-Boot] [PATCH v2 1/3] configs: trats2: enable the max77686 regulator config
Jaehoon Chung
- [U-Boot] [PATCH v2 2/3] power: pmic_max77686: remove the old pmic_max77686 file
Jaehoon Chung
- [U-Boot] [PATCH v2 3/3] lib: fdtdec: drop the old compatible about max77686
Jaehoon Chung
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jaehoon Chung
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Jaehoon Chung
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Jaehoon Chung
- [U-Boot] [PATCH 1/3] mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h
Jaehoon Chung
- [U-Boot] [PATCH 2/3] mmc: add the debug message in mmc_set_clock
Jaehoon Chung
- [U-Boot] [PATCH 3/3] mmc: Kconfig: add the MMC_TRACE config in Kconfig
Jaehoon Chung
- [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time
Jaehoon Chung
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Jaehoon Chung
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Jaehoon Chung
- [U-Boot] [PATCH 2/3] mmc: add the debug message in mmc_set_clock
Jaehoon Chung
- [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jaehoon Chung
- [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time
Jaehoon Chung
- [U-Boot] [PATCH] mmc: use pr_* log functions
Jaehoon Chung
- [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jaehoon Chung
- [U-Boot] [PATCH] mmc: synchronize the sequence with enum bus_mode in mmc.h
Jaehoon Chung
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jaehoon Chung
- [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time
Jaehoon Chung
- [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH 4/4] usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command
Jaehoon Chung
- [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
Jaehoon Chung
- [U-Boot] [PATCH] common/memsize.c: restore content of the base address
Patrick DELAUNAY
- [U-Boot] [PATCH] serial: lpuart: Proper device identification
Sriram Dash
- [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3
Sriram Dash
- [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3
Sriram Dash
- [U-Boot] [PATCH v3] armv8: Remove dependency of SERDES for LSCH2 and LSCH3
Sriram Dash
- [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support
David.Wu
- [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
Andrew F. Davis
- [U-Boot] [PATCH] arm: am33xx: security: Fix size calculation on header
Andrew F. Davis
- [U-Boot] [PATCH] arm: mach-omap2: Remove secure certificate name printing
Andrew F. Davis
- [U-Boot] [PATCH] arm: mach-omap2: Pass args to secure ROM in SRAM in SPL
Andrew F. Davis
- [U-Boot] [PATCH v2 8/9] optee: Improve error printout
Andrew F. Davis
- [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type
Andrew F. Davis
- [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type
Andrew F. Davis
- [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND
Andrew F. Davis
- [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND
Andrew F. Davis
- [U-Boot] [PATCH v2 0/2] common/memsize.c: restore content of the base address
Patrick Delaunay
- [U-Boot] [PATCH v2 1/2] common/memsize.c: prepare get_ram_size update
Patrick Delaunay
- [U-Boot] [PATCH v2 2/2] common/memsize.c: restore content of the base address
Patrick Delaunay
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2018.01 is released
Wolfgang Denk
- [U-Boot] [RFC] SPDX License text updates
Wolfgang Denk
- [U-Boot] Wrong u-boot-mmc git URL
Wolfgang Denk
- [U-Boot] List of architectures no longer printed
Wolfgang Denk
- [U-Boot] Manual is out of date, missing commands and information
Wolfgang Denk
- [U-Boot] Guide to hush shell in u-boot
Wolfgang Denk
- [U-Boot] Manual is out of date, missing commands and information
Wolfgang Denk
- [U-Boot] Guide to hush shell in u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership
Wolfgang Denk
- [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership
Wolfgang Denk
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Diaz de Grenu, Jose
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Diaz de Grenu, Jose
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Diego Dorta
- [U-Boot] [PATCH] mx8mqevk: Update README with additional info
Diego Dorta
- [U-Boot] [PATCH] mx8mqevk: Update README with additional info
Diego Dorta
- [U-Boot] STM32F746 Discovery - No serial output?
Francois Dugast
- [U-Boot] [PATCH 0/4] serial: ns16550: cleanups and 13x oversampling
Matthijs van Duin
- [U-Boot] [PATCH 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Matthijs van Duin
- [U-Boot] [PATCH 2/4] serial: ns16550: centralize identification of uart variants
Matthijs van Duin
- [U-Boot] [PATCH 3/4] serial: ns16550: add definitions for register mdr1
Matthijs van Duin
- [U-Boot] [PATCH 4/4] serial: ns16550: use 13x oversampling when available
Matthijs van Duin
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Matthijs van Duin
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Matthijs van Duin
- [U-Boot] Please pull u-boot-coldfire/master
Angelo Dureghello
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
Fabio Estevam
- [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
Fabio Estevam
- [U-Boot] [PATCH] Revert "Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL"
Fabio Estevam
- [U-Boot] [PATCH 4/7] pci: imx: request gpio before use
Fabio Estevam
- [U-Boot] [PATCH 1/2] spi: fsl_qspi: support i.MX6UL/7D
Fabio Estevam
- [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board
Fabio Estevam
- [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL
Fabio Estevam
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH 1/3] mx6memcal: Fix the UART ports for mx6sabresd/auto boards
Fabio Estevam
- [U-Boot] [PATCH 2/3] mx6memcal: spl: Also take i.MX6ULL into account
Fabio Estevam
- [U-Boot] [PATCH 3/3] mx6memcal: spl: Disambiguate the error message
Fabio Estevam
- [U-Boot] [PATCH V2] mx6: Support SKS-Kinkel sksimx6 Board
Fabio Estevam
- [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL
Fabio Estevam
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL
Fabio Estevam
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL
Fabio Estevam
- [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL
Fabio Estevam
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Fabio Estevam
- [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Fabio Estevam
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Fabio Estevam
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Fabio Estevam
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
Fabio Estevam
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Fabio Estevam
- [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
Fabio Estevam
- [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER
Fabio Estevam
- [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL
Fabio Estevam
- [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL
Fabio Estevam
- [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1
Fabio Estevam
- [U-Boot] [PATCH V2 2/3] imx: mx7: psci: add system reset support
Fabio Estevam
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Fabio Estevam
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Fabio Estevam
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Fabio Estevam
- [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env
Fabio Estevam
- [U-Boot] [PATCH 3/3] i.MX: nand: add nandbcb update command
Fabio Estevam
- [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer
Fabio Estevam
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Fabio Estevam
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Fabio Estevam
- [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function
Fabio Estevam
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support
Fabio Estevam
- [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M
Fabio Estevam
- [U-Boot] [PATCH] doc: mxc_hab: Improve the config option list
Fabio Estevam
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Fabio Estevam
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Fabio Estevam
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Fabio Estevam
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Fabio Estevam
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Fabio Estevam
- [U-Boot] FW: u-boot v2016 vs v2013
Fabio Estevam
- [U-Boot] [PATCH V2] imx: mx25: Remove SION bit in all pin-mux that are safe
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Fabio Estevam
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE
Fabio Estevam
- [U-Boot] [PATCH] mx6sabresd: Add fastboot support
Fabio Estevam
- [U-Boot] [PATCH v2] mx6sabresd: Add fastboot support
Fabio Estevam
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Fabio Estevam
- [U-Boot] [PATCH 1/2] iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()
Fabio Estevam
- [U-Boot] [PATCH 2/2] i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro
Fabio Estevam
- [U-Boot] [PATCH] Initialize SHA buffer size var in passwd_abort
Martin Etnestad
- [U-Boot] [PATCH] autoboot.c: Init SHA buffer size in passwd_abort
Martin Etnestad
- [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
Kyle Evans
- [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL
Peng Fan
- [U-Boot] [PATCH 1/7] ARM: imx: Introduce dts for i.MX6SX-SDB
Peng Fan
- [U-Boot] [PATCH 2/7] ARM: imx: Enable dts for i.MX6SX-SDB
Peng Fan
- [U-Boot] [PATCH 3/7] board: freescale: common: add pfuze dm code
Peng Fan
- [U-Boot] [PATCH 4/7] pci: imx: request gpio before use
Peng Fan
- [U-Boot] [PATCH 5/7] imx: mx6sxsabresd: Enable DM driver
Peng Fan
- [U-Boot] [PATCH 6/7] imx: mx6sxsabresd: config wdog pinmux
Peng Fan
- [U-Boot] [PATCH 7/7] imx: mx6sxsabresd: enlarge ENV offset
Peng Fan
- [U-Boot] [PATCH] Revert "Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL"
Peng Fan
- [U-Boot] [PATCH 1/2] spi: fsl_qspi: support i.MX6UL/7D
Peng Fan
- [U-Boot] [PATCH 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver
Peng Fan
- [U-Boot] [PATCH 1/2] video: ipu: Fix dereferencing NULL pointer problem
Peng Fan
- [U-Boot] [PATCH 2/2] video: Support multiple lines version string display
Peng Fan
- [U-Boot] [PATCH 1/2] i2c: lpi2c: do not add 4 for bus seq
Peng Fan
- [U-Boot] [PATCH 2/2] imx: mx7ulp: modify lpi2c seq number
Peng Fan
- [U-Boot] [PATCH] misc: mxc_ocotp: check fuse word before programming on i.MX7ULP
Peng Fan
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix eMMC 1.8v setting issue
Peng Fan
- [U-Boot] [PATCH V2] pci: imx: request gpio before use
Peng Fan
- [U-Boot] [PATCH 4/7] pci: imx: request gpio before use
Peng Fan
- [U-Boot] [PATCH V2 1/2] spi: fsl_qspi: support i.MX6UL/6ULLL/7D
Peng Fan
- [U-Boot] [PATCH V2 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver
Peng Fan
- [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Peng Fan
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Peng Fan
- [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param
Peng Fan
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V3 01/31] imx: add i.MX8M into Kconfig
Peng Fan
- [U-Boot] [PATCH V3 02/31] imx: mx8m: add register definition header file
Peng Fan
- [U-Boot] [PATCH V3 03/31] imx: mx8m: add pin header file
Peng Fan
- [U-Boot] [PATCH V3 04/31] time: add wait_mask_set/clr_timeout helper functions
Peng Fan
- [U-Boot] [PATCH V3 05/31] imx: mx8m: add clock driver
Peng Fan
- [U-Boot] [PATCH V3 06/31] imx: add sip function
Peng Fan
- [U-Boot] [PATCH V3 07/31] imx: boot_mode: add USB_BOOT entry
Peng Fan
- [U-Boot] [PATCH V3 08/31] imx: cpu: update cpu file to support i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 09/31] imx: spl: implement spl_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper
Peng Fan
- [U-Boot] [PATCH V3 11/31] imx: add pad settings bit definition for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 12/31] imx: cpu: move speed/temp to common cpu
Peng Fan
- [U-Boot] [PATCH V3 13/31] imx: cpu: add cpu speed/grade for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 14/31] imx: refactor imx_get_mac_from_fuse
Peng Fan
- [U-Boot] [PATCH V3 15/31] imx: cleanup bootaux
Peng Fan
- [U-Boot] [PATCH V3 16/31] imx: bootaux: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 17/31] imx: mx7: move get_boot_device to cpu.c
Peng Fan
- [U-Boot] [PATCH V3 18/31] imx: cpu: support get_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 19/31] imx: mx7: move mmc env code to mmc_env.c
Peng Fan
- [U-Boot] [PATCH V3 20/31] imx: mx8m: add soc related settings and files
Peng Fan
- [U-Boot] [PATCH V3 21/31] imx: makefile: compile files for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 22/31] misc: ocotp: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V3 23/31] mmc: fsl_esdhc: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 24/31] imx: lcdif: include i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 25/31] gpio: mxc: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V3 26/31] net: fec: do not access reserved register for i.MX8M
Peng Fan
- [U-Boot] [PATCH V3 27/31] net: fec: fix build warnings for 64bits support
Peng Fan
- [U-Boot] [PATCH V3 28/31] imx: imx8mq: add dtsi file
Peng Fan
- [U-Boot] [PATCH V3 29/31] power: pmic/regulator allow dm be omitted by SPL
Peng Fan
- [U-Boot] [PATCH V3 30/31] imx: mx8m: add ddr controller memory map
Peng Fan
- [U-Boot] [PATCH V3 31/31] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V4 00/32] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V4 01/32] arm: imx: Rework i.MX specific commands to be excluded from SPL
Peng Fan
- [U-Boot] [PATCH V4 02/32] imx: add i.MX8M into Kconfig
Peng Fan
- [U-Boot] [PATCH V4 03/32] imx: mx8m: add register definition header file
Peng Fan
- [U-Boot] [PATCH V4 04/32] imx: mx8m: add pin header file
Peng Fan
- [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions
Peng Fan
- [U-Boot] [PATCH V4 06/32] imx: mx8m: add clock driver
Peng Fan
- [U-Boot] [PATCH V4 07/32] imx: add sip function
Peng Fan
- [U-Boot] [PATCH V4 08/32] imx: boot_mode: add USB_BOOT entry
Peng Fan
- [U-Boot] [PATCH V4 09/32] imx: cpu: update cpu file to support i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 10/32] imx: spl: implement spl_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 11/32] imx: add i.MX8MQ SoC Revision and is_mx8m helper
Peng Fan
- [U-Boot] [PATCH V4 12/32] imx: add pad settings bit definition for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 13/32] imx: cpu: move speed/temp to common cpu
Peng Fan
- [U-Boot] [PATCH V4 14/32] imx: cpu: add cpu speed/grade for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 15/32] imx: refactor imx_get_mac_from_fuse
Peng Fan
- [U-Boot] [PATCH V4 16/32] imx: cleanup bootaux
Peng Fan
- [U-Boot] [PATCH V4 17/32] imx: bootaux: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 18/32] imx: mx7: move get_boot_device to cpu.c
Peng Fan
- [U-Boot] [PATCH V4 19/32] imx: cpu: support get_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 20/32] imx: mx7: move mmc env code to mmc_env.c
Peng Fan
- [U-Boot] [PATCH V4 21/32] imx: mx8m: add soc related settings and files
Peng Fan
- [U-Boot] [PATCH V4 22/32] imx: makefile: compile files for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 23/32] misc: ocotp: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V4 24/32] mmc: fsl_esdhc: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 25/32] imx: lcdif: include i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 26/32] gpio: mxc: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V4 27/32] net: fec: do not access reserved register for i.MX8M
Peng Fan
- [U-Boot] [PATCH V4 28/32] net: fec: fix build warnings for 64bits support
Peng Fan
- [U-Boot] [PATCH V4 29/32] imx: imx8mq: add dtsi file
Peng Fan
- [U-Boot] [PATCH V4 30/32] power: pmic/regulator allow dm be omitted by SPL
Peng Fan
- [U-Boot] [PATCH V4 31/32] imx: mx8m: add ddr controller memory map
Peng Fan
- [U-Boot] [PATCH V4 32/32] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V5 01/31] arm: imx: Rework i.MX specific commands to be excluded from SPL
Peng Fan
- [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig
Peng Fan
- [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file
Peng Fan
- [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin header file
Peng Fan
- [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver
Peng Fan
- [U-Boot] [PATCH V5 06/31] imx: add sip function
Peng Fan
- [U-Boot] [PATCH V5 07/31] imx: boot_mode: add USB_BOOT entry
Peng Fan
- [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper
Peng Fan
- [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu
Peng Fan
- [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse
Peng Fan
- [U-Boot] [PATCH V5 15/31] imx: cleanup bootaux
Peng Fan
- [U-Boot] [PATCH V5 16/31] imx: bootaux: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c
Peng Fan
- [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 19/31] imx: mx7: move mmc env code to mmc_env.c
Peng Fan
- [U-Boot] [PATCH V5 20/31] imx: mx8m: add soc related settings and files
Peng Fan
- [U-Boot] [PATCH V5 21/31] imx: makefile: compile files for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 22/31] misc: ocotp: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V5 23/31] mmc: fsl_esdhc: support i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 24/31] imx: lcdif: include i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support
Peng Fan
- [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M
Peng Fan
- [U-Boot] [PATCH V5 27/31] net: fec: fix build warnings for 64bits support
Peng Fan
- [U-Boot] [PATCH V5 28/31] imx: imx8mq: add dtsi file
Peng Fan
- [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL
Peng Fan
- [U-Boot] [PATCH V5 30/31] imx: mx8m: add ddr controller memory map
Peng Fan
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Peng Fan
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Peng Fan
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
- [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M
Peng Fan
- [U-Boot] [PATCH 2/5] mmc: fsl_esdhc: add strobe and tuning entry
Peng Fan
- [U-Boot] [PATCH 3/5] ARM: dts: add pinmux and tuning settings for HS200/SDR104
Peng Fan
- [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200
Peng Fan
- [U-Boot] [PATCH 5/5] imx: mx7dsabresd: enable UHS and HS200
Peng Fan
- [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200
Peng Fan
- [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M
Peng Fan
- [U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: add strobe and tuning entry
Peng Fan
- [U-Boot] [PATCH V2 2/4] ARM: dts: add pinmux and tuning settings for HS200/SDR104
Peng Fan
- [U-Boot] [PATCH V2 3/4] mmc: fsl_esdhc: support SDR104 and HS200
Peng Fan
- [U-Boot] [PATCH V2 4/4] imx: mx7dsabresd: enable UHS and HS200
Peng Fan
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support
Peng Fan
- [U-Boot] [PATCH] arm64 :show_regs: show the real hardware register even after relocation
Peng Fan
- [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver
Peng Fan
- [U-Boot] Modify DTB after loading fitimage
Peter Fink
- [U-Boot] [PATCH V3] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
Adam Ford
- [U-Boot] [PATCH 1/3] Convert CONFIG_TWL4030_USB to Kconfig
Adam Ford
- [U-Boot] [PATCH 2/3] Convert CONFIG_OMAP_USB_PHY to Kconfig
Adam Ford
- [U-Boot] [PATCH 3/3] Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V5] Convert CONFIG_SOC_DA8XX et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Adam Ford
- [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH V4] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND
Adam Ford
- [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND
Adam Ford
- [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_CMD_NAND to Kconfig
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_CMD_NAND to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig and add CONFIG_NAND
Adam Ford
- [U-Boot] [PATCH] mtd: nand: Kconfig Setup missing NAND dependencies based on ARCH
Adam Ford
- [U-Boot] [PATCH 1/5] Convert CONFIG_NAND_ATMEL et al to Kconfig
Adam Ford
- [U-Boot] [PATCH 2/5] Convert CONFIG_SPL_FRAMEWORK to Kconfig
Adam Ford
- [U-Boot] [PATCH 3/5] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig
Adam Ford
- [U-Boot] [PATCH 4/5] Convert CONFIG_SPL_NAND_BASE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH 5/5] Convert CONFIG_NAND_FSL_ELBC et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
Adam Ford
- [U-Boot] [PATCH] omap3_logic: Clean up I2C pin muxing.
Adam Ford
- [U-Boot] [RFC] i2c, omap24xx: Fixup High Speed Initialization
Adam Ford
- [U-Boot] [RFC v2] i2c, omap24xx: Fixup High Speed Initialization
Adam Ford
- [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate
Andreas Färber
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output
Andreas Färber
- [U-Boot] mrvl_uart.sh and Turris Omnia (was: [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router)
Andreas Färber
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Andreas Färber
- [U-Boot] compilation issue pine64
Akash Gajjar
- [U-Boot] compilation issue pine64
Akash Gajjar
- [U-Boot] [PATCH] arm: zynq: Enable SPL_CLK only if SPL is enabled
Ezequiel Garcia
- [U-Boot] [PATCH v2] mtd: zynq: nand: Move board_nand_init() function to board.c
Ezequiel Garcia
- [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c
Ezequiel Garcia
- [U-Boot] [PATCH] doc: Update the zynq u-boot status
Ezequiel Garcia
- [U-Boot] [PATCH 1/2] zynq: board: Remove checkboard()
Ezequiel Garcia
- [U-Boot] [PATCH 2/2] zynq: Support CPU info display
Ezequiel Garcia
- [U-Boot] [PATCH] nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT
Ezequiel Garcia
- [U-Boot] [PATCH 2/2] zynq: Support CPU info display
Ezequiel Garcia
- [U-Boot] [PATCH 0/5] zynq: Fun with board and CPU info display
Ezequiel Garcia
- [U-Boot] [PATCH 1/5] zynq: Define macros for the device names
Ezequiel Garcia
- [U-Boot] [PATCH 2/5] zynq: Rework FPGA initialization
Ezequiel Garcia
- [U-Boot] [PATCH 3/5] zynq: Support CPU info display
Ezequiel Garcia
- [U-Boot] [PATCH 4/5] zynq: board: Remove checkboard
Ezequiel Garcia
- [U-Boot] [PATCH 5/5] configs: zynq: Enable DISPLAY_CPUINFO
Ezequiel Garcia
- [U-Boot] [PATCH 3/5] zynq: Support CPU info display
Ezequiel Garcia
- [U-Boot] mmc1 not working on Samsung snow chromebook
Guillaume Gardet
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Guillaume Gardet
- [U-Boot] mmc1 not working on Samsung snow chromebook
Guillaume Gardet
- [U-Boot] Wrong u-boot-mmc git URL
Guillaume Gardet
- [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling
Guillaume Gardet
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
Sumit Garg
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
Sumit Garg
- [U-Boot] [PATCH] armv8: ls1088ardb: Put distro boot functions under CONFIG_SPL_BUILD
Sumit Garg
- [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction
Sumit Garg
- [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction
Sumit Garg
- [U-Boot] [PATCH v2 1/3] armv8: fsl-layerscape: SPL size reduction
Sumit Garg
- [U-Boot] [PATCH v2 2/3] armv8: ls1088a: SPL size reduction
Sumit Garg
- [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support
Sumit Garg
- [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation
Sumit Garg
- [U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
Sumit Garg
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
Sumit Garg
- [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support
Sumit Garg
- [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables
Sumit Garg
- [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables
Sumit Garg
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
Sumit Garg
- [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables
Sumit Garg
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
Sumit Garg
- [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
Yogesh Gaur
- [U-Boot] [PATCH v1] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
Yogesh Gaur
- [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
Yogesh Narayan Gaur
- [U-Boot] [PATCH 1/1] fs: remove distractive message in fs_read()
Simon Glass
- [U-Boot] [PATCH 1/1] fs/fat: remove distractive message in file_fat_read_at()
Simon Glass
- [U-Boot] [PATCH] patman: Unquote output from get_maintainer.pl
Simon Glass
- [U-Boot] [PATCH 01/16] efi_selftest: colored test output
Simon Glass
- [U-Boot] [PATCH 02/16] efi_loader: simplify efi_remove_all_protocols
Simon Glass
- [U-Boot] [PATCH 03/16] efi_selftest: do not try to close device path protocol
Simon Glass
- [U-Boot] [PATCH 04/16] efi_loader: list of open protocol infos
Simon Glass
- [U-Boot] [PATCH 05/16] efi_loader: open_info in OpenProtocol
Simon Glass
- [U-Boot] [PATCH 06/16] efi_loader: open_info in CloseProtocol
Simon Glass
- [U-Boot] [PATCH 07/16] efi_loader: implement OpenProtocolInformation
Simon Glass
- [U-Boot] [PATCH 08/16] efi_loader: debug output installed device path
Simon Glass
- [U-Boot] [PATCH 09/16] efi_loader: implement ConnectController
Simon Glass
- [U-Boot] [PATCH 10/16] efi_loader: fix signature of efi_disconnect_controller
Simon Glass
- [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController
Simon Glass
- [U-Boot] [PATCH 12/16] efi_loader: disconnect controllers in UninstallProtocol
Simon Glass
- [U-Boot] [PATCH 13/16] efi_selftest: remove todo in manage protocols
Simon Glass
- [U-Boot] [PATCH 14/16] efi_selftest: remove todo in device path test
Simon Glass
- [U-Boot] [PATCH 15/16] efi_selftest: test for (Dis)ConnectController
Simon Glass
- [U-Boot] [PATCH 16/16] efi_loader: consistently use efi_handle_t for handles
Simon Glass
- [U-Boot] [PATCH 2/4] ARM: tegra: remove SPL config for non-SPL SoCs
Simon Glass
- [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer
Simon Glass
- [U-Boot] [PATCH 4/4] ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSET
Simon Glass
- [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing
Simon Glass
- [U-Boot] [PATCH v10 23/27] board_r: initialize spi_nor
Simon Glass
- [U-Boot] [PATCH 1/9] fit: Fix CONFIG_FIT_SPL_PRINT
Simon Glass
- [U-Boot] [PATCH 2/9] fit: Add empty fit_print_contents() and fit_image_print()
Simon Glass
- [U-Boot] [PATCH 3/9] fit: Add standalone image type handling
Simon Glass
- [U-Boot] [PATCH 4/9] fit: Verify all configuration signatures
Simon Glass
- [U-Boot] [PATCH 5/9] spl: Add full fitImage support
Simon Glass
- [U-Boot] [PATCH 6/9] spl: Add support for overlaying U-Boot DT
Simon Glass
- [U-Boot] [PATCH 8/9] spl: ram: Add support for fetching image position from control DT
Simon Glass
- [U-Boot] [PATCH 9/9] spl: spi: Add support for fetching image position from control DT
Simon Glass
- [U-Boot] [PATCH 1/8] dm: add dev_read_u32()
Simon Glass
- [U-Boot] [PATCH 0/8] mmc: some fixes for core and add HS200 support for sdhci-cadence
Simon Glass
- [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c
Simon Glass
- [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot
Simon Glass
- [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER
Simon Glass
- [U-Boot] [PATCH] GPIO: pca953x: Rework to not include commands in SPL
Simon Glass
- [U-Boot] [PATCH 00/11] Introduce variables whitelisting in environment
Simon Glass
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Simon Glass
- [U-Boot] [PATCH 1/3] ARM: Tegra186: mem parsing fixes from downstream
Simon Glass
- [U-Boot] [PATCH 2/3] ARM: Tegra186: search for best RAM bank
Simon Glass
- [U-Boot] [PATCH 3/3] ARM: tegra: p2771-000: increase max DRAM bank count
Simon Glass
- [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers
Simon Glass
- [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table
Simon Glass
- [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param
Simon Glass
- [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
Simon Glass
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Simon Glass
- [U-Boot] [PATCH] ARM: bootm: don't assume sp is in DRAM bank 0
Simon Glass
- [U-Boot] [PATCH 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM
Simon Glass
- [U-Boot] Making lack-of DM conversion noisy warning
Simon Glass
- [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c
Simon Glass
- [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer
Simon Glass
- [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing
Simon Glass
- [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot
Simon Glass
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Simon Glass
- [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack
Simon Glass
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Simon Glass
- [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
Simon Glass
- [U-Boot] [PATCH 1/7] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Simon Glass
- [U-Boot] [PATCH 2/7] libfdt: fix <linux/libfdt.h>
Simon Glass
- [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly
Simon Glass
- [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h
Simon Glass
- [U-Boot] [PATCH 5/7] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper
Simon Glass
- [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper
Simon Glass
- [U-Boot] [PATCH V3 04/31] time: add wait_mask_set/clr_timeout helper functions
Simon Glass
- [U-Boot] [PATCH V3 29/31] power: pmic/regulator allow dm be omitted by SPL
Simon Glass
- [U-Boot] [PATCH v4 1/1] vsprintf.c: add EFI device path printing
Simon Glass
- [U-Boot] [PATCH v3 01/16] efi_selftest: colored test output
Simon Glass
- [U-Boot] [PATCH v3 02/16] efi_loader: simplify efi_remove_all_protocols
Simon Glass
- [U-Boot] [PATCH v3 03/16] efi_selftest: do not try to close device path protocol
Simon Glass
- [U-Boot] [PATCH v3 16/16] efi_loader: consistently use efi_handle_t for handles
Simon Glass
- [U-Boot] [PATCH v8 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338
Simon Glass
- [U-Boot] [PATCH v8 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348
Simon Glass
- [U-Boot] [PATCH v8 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358
Simon Glass
- [U-Boot] [PATCH v8 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380
Simon Glass
- [U-Boot] [PATCH v8 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268
Simon Glass
- [U-Boot] [PATCH v8 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Simon Glass
- [U-Boot] [PATCH v8 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D
Simon Glass
- [U-Boot] [PATCH] tools: Update python "help" tests to cope with "more" oddities
Simon Glass
- [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
Simon Glass
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Simon Glass
- [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
Simon Glass
- [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
Simon Glass
- [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
Simon Glass
- [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
Simon Glass
- [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
Simon Glass
- [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
Simon Glass
- [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support
Simon Glass
- [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function
Simon Glass
- [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer
Simon Glass
- [U-Boot] [PATCH v2 07/15] env: mmc: Make the debug messages play a little nicer
Simon Glass
- [U-Boot] [PATCH v2 08/15] env: common: Make the debug messages play a little nicer
Simon Glass
- [U-Boot] [PATCH v2 10/15] env: Initialise all the environments
Simon Glass
- [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework
Simon Glass
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Simon Glass
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Simon Glass
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Simon Glass
- [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
Simon Glass
- [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
Simon Glass
- [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver
Simon Glass
- [U-Boot] [PATCH 0/9] log: Support control over the log output format
Simon Glass
- [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
Simon Glass
- [U-Boot] [PATCH 1/2] dtoc: Allow DTC environment variable to provide path to dtc
Simon Glass
- [U-Boot] [PATCH 2/2] test: Set the DTC environment variable
Simon Glass
- [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
Simon Glass
- [U-Boot] [PATCH] cmd: console: Add serial devices probe command
Simon Glass
- [U-Boot] [PATCH] tools: remove unused ret
Simon Glass
- [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Glass
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Simon Glass
- [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
Simon Glass
- [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
Simon Glass
- [U-Boot] [PATCH 1/1] log: add category LOGC_EFI
Simon Glass
- [U-Boot] [PATCH 1/1] dm: fix typo falback
Simon Glass
- [U-Boot] [PATCH v4] drivers: core: Add translation in live tree case
Simon Glass
- [U-Boot] [PATCH] patman: Unquote output from get_maintainer.pl
Simon Glass
- [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param
Simon Glass
- [U-Boot] [RESEND PATCH v2 1/4] clk: clk-uclass: Fix style violations
Simon Glass
- [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation
Simon Glass
- [U-Boot] [RESEND PATCH v2 3/4] clk: Remove superfluous gd declarations
Simon Glass
- [U-Boot] [RESEND PATCH v2 4/4] clk: Makefile: Sort entries alphabetically
Simon Glass
- [U-Boot] [RESEND PATCH v2 1/4] core: ofnode: Fix style violations
Simon Glass
- [U-Boot] [RESEND PATCH v2 2/4] core: read: Fix style violations
Simon Glass
- [U-Boot] [RESEND PATCH v2 4/4] core: Make device_is_compatible live-tree compatible
Simon Glass
- [U-Boot] [RESEND PATCH v2 2/2] lib: fdtdec: Fix some style violations
Simon Glass
- [U-Boot] [RESEND PATCH v2 1/2] lib: fdtdec: Fix whitespace style violations
Simon Glass
- [U-Boot] [RESEND PATCH v2 3/4] core: Add {ofnode, dev}_translate_address functions
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Simon Glass
- [U-Boot] [PATCH 0/9] log: Support control over the log output format
Simon Glass
- [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI
Simon Glass
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Simon Glass
- [U-Boot] [PATCH 1/9] dm: core: Add a function to look up a uclass by name
Simon Glass
- [U-Boot] [PATCH 2/9] log: Add functions to convert IDs to/from names
Simon Glass
- [U-Boot] [PATCH 3/9] log: Add control over log formatting
Simon Glass
- [U-Boot] [PATCH 4/9] log: Update log_console to honour the log format
Simon Glass
- [U-Boot] [PATCH 5/9] log: Add a command to control the log output format
Simon Glass
- [U-Boot] [PATCH 6/9] log: Add a command to output a log record
Simon Glass
- [U-Boot] [PATCH 7/9] log: Add tests for the new log features
Simon Glass
- [U-Boot] [PATCH 8/9] log: Add documentation for commands and formatting
Simon Glass
- [U-Boot] [PATCH 9/9] log: Add a way to log error-return values
Simon Glass
- [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI
Simon Glass
- [U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Simon Glass
- [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
Simon Glass
- [U-Boot] [PATCH] cmd: pmic: update help description
Klaus Goger
- [U-Boot] [PATCH] spl: include timezone in banner
Klaus Goger
- [U-Boot] [PATCH] arm: socfpga: allow configs without network support
Simon Goldschmidt
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings
Simon Goldschmidt
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Simon Goldschmidt
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Simon Goldschmidt
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Goldschmidt
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Goldschmidt
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Goldschmidt
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Simon Goldschmidt
- [U-Boot] [PATCH v2] arm: socfpga: allow configs without network support
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")
Simon Goldschmidt
- [U-Boot] [PATCH] env: sf: fix return value of env_sf_load
Simon Goldschmidt
- [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak
Simon Goldschmidt
- [U-Boot] [PATCH] env: sf: fix return value of env_sf_load
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Simon Goldschmidt
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Simon Goldschmidt
- [U-Boot] [PATCH 0/4] env: cleanups after adding multiple envs
Simon Goldschmidt
- [U-Boot] [PATCH 1/4] env: make env_import(_redund) return 0 on success, not 1
Simon Goldschmidt
- [U-Boot] [PATCH 2/4] env: move more common code to env_import_redund
Simon Goldschmidt
- [U-Boot] [PATCH 3/4] env: make env drivers propagate env_import return value
Simon Goldschmidt
- [U-Boot] [PATCH 4/4] env: sf: use env_import_redund to simplify env_sf_load
Simon Goldschmidt
- [U-Boot] [PATCH 0/4] env: cleanups after adding multiple envs
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/4] env: cleanups after adding multiple envs
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/4] env: make env_import(_redund) return 0 on success, not 1
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/4] env: move more common code to env_import_redund
Simon Goldschmidt
- [U-Boot] [PATCH v2 3/4] env: make env drivers propagate env_import return value
Simon Goldschmidt
- [U-Boot] [PATCH v2 4/4] env: sf: use env_import_redund to simplify env_sf_load
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Nuno Goncalves
- [U-Boot] [PATCH 1/3] sunxi: remove allwinner prefix in pinctrl nodes
Nuno Goncalves
- [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5
Nuno Goncalves
- [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero
Nuno Goncalves
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Nuno Gonçalves
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Nuno Gonçalves
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Nuno Gonçalves
- [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5
Nuno Gonçalves
- [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero
Nuno Gonçalves
- [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().
Alexander Graf
- [U-Boot] UEFI on u-boot
Alexander Graf
- [U-Boot] UEFI on u-boot
Alexander Graf
- [U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller
Alexander Graf
- [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
Alexander Graf
- [U-Boot] [PATCH 2/3] mmc: Add bcm2835 sdhost controller
Alexander Graf
- [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support
Alexander Graf
- [U-Boot] [PATCH 0/7] RPi: Properly handle dynamic serial configuration
Alexander Graf
- [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH 2/7] serial: Allow boards to determine whether a serial device is usable
Alexander Graf
- [U-Boot] [PATCH 3/7] rpi: Remove runtime disabling support for serial
Alexander Graf
- [U-Boot] [PATCH 4/7] serial: bcm283x_mu: Remove support for post-init disabling
Alexander Graf
- [U-Boot] [PATCH 5/7] rpi: Properly detect which serial device is active
Alexander Graf
- [U-Boot] [PATCH 6/7] rpi: Determine PL011/Mini-UART availability at runtime
Alexander Graf
- [U-Boot] [PATCH 7/7] rpi: Force skip_init on serial devices
Alexander Graf
- [U-Boot] UEFI on u-boot
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table
Alexander Graf
- [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH v2 0/7] RPi: Properly handle dynamic serial configuration
Alexander Graf
- [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Alexander Graf
- [U-Boot] [PATCH v2 3/7] rpi: Remove runtime disabling support for serial
Alexander Graf
- [U-Boot] [PATCH v2 4/7] serial: bcm283x_mu: Remove support for post-init disabling
Alexander Graf
- [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
Alexander Graf
- [U-Boot] [PATCH v2 6/7] rpi: Determine PL011/Mini-UART availability at runtime
Alexander Graf
- [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
Alexander Graf
- [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support
Alexander Graf
- [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
Alexander Graf
- [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Alexander Graf
- [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active
Alexander Graf
- [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices
Alexander Graf
- [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable
Alexander Graf
- [U-Boot] [PATCH v2 0/2] Rpi: Add support for second sd host controller
Alexander Graf
- [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver
Alexander Graf
- [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller
Alexander Graf
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_selftest: test start image
Alexander Graf
- [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol
Alexander Graf
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Alexander Graf
- [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
Alexander Graf
- [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Alexander Graf
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Alexander Graf
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Alexander Graf
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Alexander Graf
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Alexander Graf
- [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices
Alexander Graf
- [U-Boot] [PATCH v3 07/16] efi_loader: implement OpenProtocolInformation
Alexander Graf
- [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver
Alexander Graf
- [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles
Alexander Graf
- [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles
Alexander Graf
- [U-Boot] [PATCH v3 17/18] efi_driver: EFI block driver
Alexander Graf
- [U-Boot] [PATCH v4 1/2] efi_driver: EFI block driver
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2018-01-23
Alexander Graf
- [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller
Alexander Graf
- [U-Boot] [PATCH v3 0/2] Rpi: Add support for second sd host controller
Alexander Graf
- [U-Boot] [PATCH v3 1/2] bcm283x: Add pinctrl driver
Alexander Graf
- [U-Boot] [PATCH v3 2/2] mmc: Add bcm2835 sdhost controller
Alexander Graf
- [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice
Alexander Graf
- [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.
Alexander Graf
- [U-Boot] [PATCH 1/2] efi: Conflict efi_loader with different stub bitness
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: Always use EFIAPI instead of asmlinkage
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: Always use EFIAPI instead of asmlinkage
Alexander Graf
- [U-Boot] [PATCH v3 00/15] RPi: Properly handle dynamic serial configuration
Alexander Graf
- [U-Boot] [PATCH v3 01/15] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH v3 02/15] rpi: Remove runtime disabling support for serial
Alexander Graf
- [U-Boot] [PATCH v3 03/15] serial: bcm283x_mu: Remove support for post-init disabling
Alexander Graf
- [U-Boot] [PATCH v3 04/15] rpi: Determine PL011/Mini-UART availability at runtime
Alexander Graf
- [U-Boot] [PATCH v3 05/15] serial_bcm283x_mu: Convert to dev_read
Alexander Graf
- [U-Boot] [PATCH v3 06/15] serial_bcm283x_mu: Always skip init
Alexander Graf
- [U-Boot] [PATCH v3 07/15] serial_bcm283x_mu: Fail loading if not muxed
Alexander Graf
- [U-Boot] [PATCH v3 08/15] pl01x: Convert to dev_read
Alexander Graf
- [U-Boot] [PATCH v3 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig
Alexander Graf
- [U-Boot] [PATCH v3 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig
Alexander Graf
- [U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig
Alexander Graf
- [U-Boot] [PATCH v3 12/15] bcm2835_mu_serial: Convert to Kconfig
Alexander Graf
- [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership
Alexander Graf
- [U-Boot] [PATCH v3 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver
Alexander Graf
- [U-Boot] [PATCH v3 15/15] bcm2835_pinctrl: Probe pre-reloc
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Alexander Graf
- [U-Boot] [PATCH] efi_laoder: Call Exit() on return from payload in StartImage()
Alexander Graf
- [U-Boot] [PATCH v2 1/1] efi_loader: Call Exit() on return from payload in StartImage()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: split README.efi into two separate documents
Alexander Graf
- [U-Boot] [PATCH v2 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2018-01-28
Alexander Graf
- [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [PATCH] serial: Make full device search optional
Alexander Graf
- [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: efi_smbios_register should have a return value
Alexander Graf
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_smbios_register should have a return value
Alexander Graf
- [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64
Jonathan Gray
- [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64
Jonathan Gray
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Clemens Gruber
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
Clemens Gruber
- [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation
Clemens Gruber
- [U-Boot] [PATCH 1/2] mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE
Shawn Guo
- [U-Boot] [PATCH] mx6sabresd: Add fastboot support
Shawn Guo
- [U-Boot] [PATCH] mx6sabresd: Add fastboot support
Shawn Guo
- [U-Boot] [PATCH v2 1/2] video: ipu: Fix dereferencing NULL pointer problem
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] video: Support multiple lines version string display
Anatolij Gustschin
- [U-Boot] [PATCH v2 1/2] video: ipu: Fix dereferencing NULL pointer problem
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH 1/6] mach-omap2: add AM335x Display PLL register definition
Anatolij Gustschin
- [U-Boot] [PATCH 2/6] am335x-fb: cosmetic: update-copyright
Anatolij Gustschin
- [U-Boot] [PATCH 3/6] am335x-fb: cosmetic: fix coding style
Anatolij Gustschin
- [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider
Anatolij Gustschin
- [U-Boot] [PATCH 6/6] board/BuR: drop LCDC clock manipulation from board code
Anatolij Gustschin
- [U-Boot] [PATCH v3 1/6] mach-omap2: add AM335x Display PLL register definition
Anatolij Gustschin
- [U-Boot] [PATCH v3 2/6] am335x-fb: cosmetic: update-copyright
Anatolij Gustschin
- [U-Boot] [PATCH v3 3/6] am335x-fb: cosmetic: fix coding style
Anatolij Gustschin
- [U-Boot] [PATCH v3 4/6] am335x-fb: setup display PLL
Anatolij Gustschin
- [U-Boot] [PATCH v3 5/6] board/BuR: provide real clock-frequency instead a divider
Anatolij Gustschin
- [U-Boot] [PATCH v3 6/6] board/BuR: drop LCDC clock manipulation from board code
Anatolij Gustschin
- [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL
Anatolij Gustschin
- [U-Boot] [PATCH v3 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video/master
Anatolij Gustschin
- [U-Boot] extract size of FIT image
Anatolij Gustschin
- [U-Boot] [PATCH] TCP and wget implementation v3
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation v4
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation v4
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation v5.1
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation v5.1
Duncan Hare
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Duncan Hare
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3
Duncan Hare
- [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3
Duncan Hare
- [U-Boot] Subject: [PATCH 2/3] TCP and wget implementation. Patch V5, 2 of 3.
Duncan Hare
- [U-Boot] [PATCH 0/2] warp7: add UART6 support
Ryan Harkin
- [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
Ryan Harkin
- [U-Boot] [PATCH 2/2] warp7: add support for console on UART6 and mikroBus
Ryan Harkin
- [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
Ryan Harkin
- [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode
Ryan Harkin
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Ryan Harkin
- [U-Boot] "fdt" commands in extlinux.conf ?
Ken Harris
- [U-Boot] "fdt" commands in extlinux.conf ?
Ken Harris
- [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig
Ken Harris
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL
Tim Harvey
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL
Tim Harvey
- [U-Boot] [PATCH] net: sh-eth: Fix coding style checked by checkpatch.pl
Joe Hershberger
- [U-Boot] [PATCH] ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v3
Joe Hershberger
- [U-Boot] [PATCH v2 23/78] net: tsec: Fix memory leak in error path
Joe Hershberger
- [U-Boot] [PATCH v2 24/78] net: tsec: Make live-tree compatible
Joe Hershberger
- [U-Boot] [PATCH v2 74/78] phy: Fix style violations
Joe Hershberger
- [U-Boot] [PATCH v2 22/78] net: tsec: Fix style violations
Joe Hershberger
- [U-Boot] [PATCH v2 67/78] cmd: mdio: Fix style violations
Joe Hershberger
- [U-Boot] [PATCH v2 32/78] net: phy: marvell: Fix style violations
Joe Hershberger
- [U-Boot] [PATCH] net: sh-eth: Add to Kconfig and convert
Joe Hershberger
- [U-Boot] [PATCH] phy: atheros: set auto-negotiation for AR8021
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v3
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH v4 0/4] net: phy: Add Broadcom BCM53xx switch driver
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v4
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v4
Joe Hershberger
- [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v5.1
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH] TCP and wget implementation v5.1
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] net: macb: Add support for Xilinx Zynq SoC
Joe Hershberger
- [U-Boot] net: Fix buffer overrun error in netconsole
Joe Hershberger
- [U-Boot] net: Remove nfs.h include from bootp.c
Joe Hershberger
- [U-Boot] net: phy: marvell: Add functions to read PHY's extended registers
Joe Hershberger
- [U-Boot] net: sh-eth: fix inl and outl definitions
Joe Hershberger
- [U-Boot] net: sh-eth: remove sh_eth_offset_rz table
Joe Hershberger
- [U-Boot] net: miiphybb: fix casting error
Joe Hershberger
- [U-Boot] net: mvneta - Fixed recv() when multiple packets have arrived.
Joe Hershberger
- [U-Boot] dm: core: add missing dev_count_phandle_with_args()
Joe Hershberger
- [U-Boot] net: designware: add clock support
Joe Hershberger
- [U-Boot] net: phy: Add Broadcom BCM53xx switch driver
Joe Hershberger
- [U-Boot] net: designware: Pad small packets
Joe Hershberger
- [U-Boot] net: phy: b53: Add b53_reg read/write commands
Joe Hershberger
- [U-Boot] configs: Update Lamobo_R1 with B53 switch options
Joe Hershberger
- [U-Boot] net: dhcp: Allow "MAY_FAIL" to still try each adapter
Joe Hershberger
- [U-Boot] net: sh-eth: Fix coding style checked by checkpatch.pl
Joe Hershberger
- [U-Boot] net: sh-eth: Remove bd_t from sh_eth_config()
Joe Hershberger
- [U-Boot] net: sh-eth: Change read/write() param to struct sh_eth_info
Joe Hershberger
- [U-Boot] net: sh-eth: Fix misaligned cache operation warning
Joe Hershberger
- [U-Boot] net: sh-eth: Add to Kconfig and convert
Joe Hershberger
- [U-Boot] phy: atheros: set auto-negotiation for AR8021
Joe Hershberger
- [U-Boot] UDP packet sender
Joe Hershberger
- [U-Boot] UDP packet sender
Joe Hershberger
- [U-Boot] [PATCH] git_meg_1
Joe Hershberger
- [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets
Joe Hershberger
- [U-Boot] u-boot mkimage tool generates wrong-endianness header when run on big endian, resulting in unbootable image
Justin Hibbits
- [U-Boot] [PATCH] Fix FreeBSD endian checks
Justin Hibbits
- [U-Boot] [PATCH v1 03/10] mmc: remove unneeded verification in mmc_set_card_speed()
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/9] common: do not compile common fastboot code when building the SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 2/9] mmc: atmel: when sending a data command, use the provided block size
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/9] mmc: compile out more code if support for UHS and HS200 is not enabled
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/9] mmc: reworked version lookup in mmc_startup_v4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 5/9] mmc: add a Kconfig option to enable the support for MMC write operations
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 6/9] mmc: read ssr only if MMC write support is enabled
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 7/9] mmc: compile out erase and write mmc commands if write operations are not enabled
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 8/9] mmc: don't read the size of eMMC enhanced user data area in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 9/9] mmc: remove hc_wp_grp_size from struct mmc if not needed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/6] Add support for DM_USB for TI's DRA7 platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/6] board: ti: dra7xx-evm: turn on USB clocks in late init stage
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/6] syscon: dm: Add a new method to get a regmap from DTS
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 3/6] phy: Add a new driver for OMAP's USB2 PHYs
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 4/6] usb: omap5: Add glue logic to support DM for USB host
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 5/6] configs: enable DM_USB for all the platforms of the DRA7 family
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 6/6] dts: dra7x: enable host on USB2 for all the platforms of the DRA7 family
Jean-Jacques Hiblot
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 01/24] mmc: omap_hsmmc: cleanup clock configuration
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 02/24] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 03/24] mmc: omap_hsmmc: add support to set default io voltage
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 05/24] mmc: omap_hsmmc: Enable DDR mode support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 06/24] mmc: omap_hsmmc: Add tuning support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 07/24] mmc: omap_hsmmc: Workaround for errata id i802
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 08/24] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 10/24] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 11/24] mmc: omap_hsmmc: Add support to set IODELAY values
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 12/24] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 13/24] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 14/24] mmc: omap_hsmmc: update mmc->clock with the actual bus speed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 15/24] mmc: omap_hsmmc: implement send_init_stream callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 16/24] mmc: omap_hsmmc: allow mmc clock to be gated
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 17/24] mmc: omap_hsmmc: add signal voltage selection support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 18/24] ARM: OMAP5: set mmc clock frequency to 192MHz
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 19/24] ARM: dts: DRA7: use new dra7-specific compatible string
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 20/24] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 21/24] dts: am57xx-beagle-x15: disable UHS and HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 22/24] dts: am57xx-idk: disable HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 23/24] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 24/24] configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 01/24] mmc: omap_hsmmc: cleanup clock configuration
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 02/24] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 03/24] mmc: omap_hsmmc: add support to set default io voltage
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 05/24] mmc: omap_hsmmc: Enable DDR mode support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 06/24] mmc: omap_hsmmc: Add tuning support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 07/24] mmc: omap_hsmmc: Workaround for errata id i802
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 08/24] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 10/24] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 11/24] mmc: omap_hsmmc: Add support to set IODELAY values
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 12/24] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 13/24] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 14/24] mmc: omap_hsmmc: update mmc->clock with the actual bus speed
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 15/24] mmc: omap_hsmmc: implement send_init_stream callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 16/24] mmc: omap_hsmmc: allow mmc clock to be gated
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 17/24] mmc: omap_hsmmc: add signal voltage selection support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 18/24] ARM: OMAP5: set mmc clock frequency to 192MHz
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 19/24] ARM: dts: DRA7: use new dra7-specific compatible string
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 20/24] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 21/24] dts: am57xx-beagle-x15: disable UHS and HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 22/24] dts: am57xx-idk: disable HS200 support
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 23/24] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 24/24] configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Fix build of socfpga targets when CONFIG_SPL is not set (i.e., you do not want to generate preloader image)
Éric Hoffman
- [U-Boot] List of architectures no longer printed
Nathan Holder
- [U-Boot] Manual is out of date, missing commands and information
Nathan Holder
- [U-Boot] Guide to hush shell in u-boot
Nathan Holder
- [U-Boot] Manual is out of date, missing commands and information
Nathan Holder
- [U-Boot] Guide to hush shell in u-boot
Nathan Holder
- [U-Boot] [PATCH 0/7] sun50i device tree changes
Samuel Holland
- [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check
Samuel Holland
- [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties
Samuel Holland
- [U-Boot] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
Samuel Holland
- [U-Boot] [PATCH 4/7] sun50i: a64: Update OrangePi Win defconfig and DTS
Samuel Holland
- [U-Boot] [PATCH 5/7] sun50i: h5: Clean up OrangePi PC 2 device tree
Samuel Holland
- [U-Boot] [PATCH 6/7] sun50i: h5: Enable remaining USB ports on OrangePi PC2
Samuel Holland
- [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus
Samuel Holland
- [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus
Samuel Holland
- [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties
Samuel Holland
- [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check
Samuel Holland
- [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check
Samuel Holland
- [U-Boot] [PATCH] net: sun8i_emac: Fix PHY initialization
Samuel Holland
- [U-Boot] [PATCH] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH 1/3] mx7_common: use psci 1.0 instead of 0.1
Anson Huang
- [U-Boot] [PATCH 2/3] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support
Anson Huang
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1
Anson Huang
- [U-Boot] [PATCH V2 2/3] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V2 3/3] imx: mx7: psci: add system power off support
Anson Huang
- [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support
Anson Huang
- [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1
Anson Huang
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V3 1/3] mx7_common: use psci 1.0 instead of 0.1
Anson Huang
- [U-Boot] [PATCH V3 2/3] imx: mx7: psci: add system reset support
Anson Huang
- [U-Boot] [PATCH V3 3/3] imx: mx7: psci: add system power off support
Anson Huang
- [U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard
Priyanka Jain
- [U-Boot] [PATCH] board/ls2081ardb: Update board related prints
Priyanka Jain
- [U-Boot] [PATCH] net/phy/cortina.c: Update get_phy_id implementation
Priyanka Jain
- [U-Boot] [PATCH] net/phy/cortina: Add No firmware upload option
Priyanka Jain
- [U-Boot] [PATCH 1/9] drivers: net: pfe_eth: LS1012A PFE driver introduction
Calvin Johnson
- [U-Boot] [PATCH] TCP and wget implementation. Patch V5, 3 of 3.
Calvin Johnson
- [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse
Calvin Johnson
- [U-Boot] [PATCH] Relax check for valid environment in __hconfig
Alexander Kabaev
- [U-Boot] [PATCH v2] Relax check for valid environment in __hwconfig
Alexander Kabaev
- [U-Boot] [PATCH] Relax check for valid environment in __hwconfig
Alexander Kabaev
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Mark Kettenis
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Russell King
- [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB
Code Kipper
- [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support
Troy Kisky
- [U-Boot] [PATCH] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
Paul Kocialkowski
- [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Jörg Krause
- [U-Boot] [PATCH 0/4] Add CONFIG_SPL_NAND_IDENT
Jörg Krause
- [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function
Jörg Krause
- [U-Boot] [PATCH 2/4] spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips
Jörg Krause
- [U-Boot] [PATCH 3/4] mtd: nand: mxs_nand_spl: refactor mxs_flash_ident
Jörg Krause
- [U-Boot] [PATCH 4/4] mtd: nand: mxs_nand_spl: add mxs_flash_full_ident
Jörg Krause
- [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function
Jörg Krause
- [U-Boot] [PATCH RESEND 0/4] Add CONFIG_SPL_NAND_IDENT
Jörg Krause
- [U-Boot] [PATCH RESEND 1/4] mtd: nand: export nand_get_flash_type function
Jörg Krause
- [U-Boot] [PATCH RESEND 2/4] spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips
Jörg Krause
- [U-Boot] [PATCH RESEND 3/4] mtd: nand: mxs_nand_spl: refactor mxs_flash_ident
Jörg Krause
- [U-Boot] [PATCH RESEND 4/4] mtd: nand: mxs_nand_spl: add mxs_flash_full_ident
Jörg Krause
- [U-Boot] x86: 64-bit U-boot image compilation errors
Krehic, Damir
- [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL
Max Krummenacher
- [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Ashish Kumar
- [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088ardb: Put distro boot functions under CONFIG_SPL_BUILD
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
Ashish Kumar
- [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
Ashish Kumar
- [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR
Ashish Kumar
- [U-Boot] [PATCH 1/2] fsl: common :qixis: Add ifc and emmc switching via qixis
Ashish Kumar
- [U-Boot] [PATCH 2/2] armv8: ls1088: Add ifc, emmc lbmap and rcw_src entry for ls1088
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
Ashish Kumar
- [U-Boot] [PATCH 4/4] armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs
Ashish Kumar
- [U-Boot] [RESEND PATCH] armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs
Ashish Kumar
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Ashish Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] UEFI on u-boot
Udit Kumar
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Prabhakar Kushwaha
- [U-Boot] [PATCH v10 24/27] env: add spi-nor environment
Prabhakar Kushwaha
- [U-Boot] [RFC 0/5] sf: Update spi-nor framework
Prabhakar Kushwaha
- [U-Boot] [RFC 0/5] sf: Update spi-nor framework
Prabhakar Kushwaha
- [U-Boot] [PATCH] Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig and add CONFIG_NAND
Christophe LEROY
- [U-Boot] [PATCH V3] Convert CONFIG_SOC_DA8XX et al to Kconfig
David Lechner
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
David Lechner
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
David Lechner
- [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig
David Lechner
- [U-Boot] [PATCH V5] Convert CONFIG_SOC_DA8XX et al to Kconfig
David Lechner
- [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
David Lechner
- [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
David Lechner
- [U-Boot] [PATCH V2] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
David Lechner
- [U-Boot] [PATCH V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
David Lechner
- [U-Boot] On writing .ext4 image to MMC
Adam Lee
- [U-Boot] On writing .ext4 image to MMC
Adam Lee
- [U-Boot] On writing .ext4 image to MMC
Adam Lee
- [U-Boot] [PATCH 7/7] powerpc/8xx: refactorise reginfo
Christophe Leroy
- [U-Boot] [PATCH 5/7] powerpc/8xx: Change CONFIG_8xx to CONFIG_MPC8xx
Christophe Leroy
- [U-Boot] [PATCH 1/7] soft_i2c: cleanup - no 8xx support
Christophe Leroy
- [U-Boot] [PATCH 3/7] powerpc/8xx: cleaning up watchdog
Christophe Leroy
- [U-Boot] [PATCH 4/7] powerpc/8xx: get rid of get_immr()
Christophe Leroy
- [U-Boot] [PATCH 2/7] boards/MCR3000: cleanup config
Christophe Leroy
- [U-Boot] [PATCH 6/7] powerpc/8xx: get rid of the multiple PVR_ values
Christophe Leroy
- [U-Boot] [PATCH 1/7] soft_i2c: cleanup - no 8xx support
Christophe Leroy
- [U-Boot] [PATCH 2/7] boards/MCR3000: cleanup config
Christophe Leroy
- [U-Boot] [PATCH 3/7] powerpc/8xx: cleaning up watchdog
Christophe Leroy
- [U-Boot] [PATCH 4/7] powerpc/8xx: get rid of get_immr()
Christophe Leroy
- [U-Boot] [PATCH 5/7] powerpc/8xx: Change CONFIG_8xx to CONFIG_MPC8xx
Christophe Leroy
- [U-Boot] [PATCH 6/7] powerpc/8xx: get rid of the multiple PVR_ values
Christophe Leroy
- [U-Boot] [PATCH 7/7] powerpc/8xx: refactorise reginfo
Christophe Leroy
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Leo Li
- [U-Boot] [PATCH] crypto/fsl: Fix HW accelerated hash commands
Breno Lima
- [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Breno Matheus Lima
- [U-Boot] [PATCH v3 00/25] Fix and extend i.MX HAB layer
Breno Matheus Lima
- [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7
Breno Matheus Lima
- [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer
Breno Matheus Lima
- [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
Breno Matheus Lima
- [U-Boot] [PATCH v6 21/25] arm: imx: hab: Make authenticate_image() return zero on open boards
Breno Matheus Lima
- [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL
Breno Matheus Lima
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Breno Matheus Lima
- [U-Boot] U-boot can verify an HW signature?
Breno Matheus Lima
- [U-Boot] U-boot can verify an HW signature?
Breno Matheus Lima
- [U-Boot] U-boot can verify an HW signature?
Breno Matheus Lima
- [U-Boot] [PATCH] doc: mxc_hab: Improve the config option list
Breno Matheus Lima
- [U-Boot] [GIT PULL] ZFS: lundman/master
Jorgen Lundman
- [U-Boot] [GIT PULL] ZFS: lundman/master
Jorgen Lundman
- [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'
Ulf Magnusson
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Ulf Magnusson
- [U-Boot] [PATCH] am335x, shc: kconfig: Fix misspelled choice default
Ulf Magnusson
- [U-Boot] [PATCH] usb: ulpi: kconfig: Remove meaningless choice default
Ulf Magnusson
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Ulf Magnusson
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Ulf Magnusson
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Ulf Magnusson
- [U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support
Lukasz Majewski
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Lukasz Majewski
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Lukasz Majewski
- [U-Boot] [PATCH] cmd: pmic: update help description
Lukasz Majewski
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Lukasz Majewski
- [U-Boot] exFAT support in u-boot
Lukasz Majewski
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (09.01.2018)
Lukasz Majewski
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Lukasz Majewski
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Lukasz Majewski
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Lukasz Majewski
- [U-Boot] UDP packet sender
Lukasz Majewski
- [U-Boot] [RFC] SPDX License text updates
Lukasz Majewski
- [U-Boot] [PATCH 1/3] configs: trats2: enable the max77686 regulator config
Lukasz Majewski
- [U-Boot] [PATCH 2/3] power: pmic_max77686: remove the old pmic_max77686 file
Lukasz Majewski
- [U-Boot] [PATCH v2 3/3] lib: fdtdec: drop the old compatible about max77686
Lukasz Majewski
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Lukasz Majewski
- [U-Boot] FW: u-boot v2016 vs v2013
Lukasz Majewski
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Lukasz Majewski
- [U-Boot] [PATCH] dm: serial: Initialize serial console only when it wasn't already configured
Lukasz Majewski
- [U-Boot] [PATCH] spl: add option to disable SPL banner output
Lukasz Majewski
- [U-Boot] [PATCH v2] spl: add option to disable SPL banner output
Lukasz Majewski
- [U-Boot] [PATCH] spl: add option to disable SPL banner output
Lukasz Majewski
- [U-Boot] reading ubi from a NAND for programming to other devices
Lukasz Majewski
- [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device
Lukasz Majewski
- [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Lukasz Majewski
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Lukasz Majewski
- [U-Boot] Guide to hush shell in u-boot
Lukasz Majewski
- [U-Boot] [PATCH] mmc: use pr_* log functions
Lukasz Majewski
- [U-Boot] How to debug u-boot on arm board if nothing printed via uart?
Lukasz Majewski
- [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time
Lukasz Majewski
- [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries
Lukasz Majewski
- [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 4/4] usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command
Lukasz Majewski
- [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH] Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries
Lukasz Majewski
- [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries
Lukasz Majewski
- [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c
Vikas Manocha
- [U-Boot] [PATCH 2/2] configs: stm32: move config flag from defconfig to Kconfig
Vikas Manocha
- [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
Vikas Manocha
- [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
Vikas Manocha
- [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup
Vikas Manocha
- [U-Boot] [PATCH 1/8] mach-stm32: Add get_cpu_id support
Vikas Manocha
- [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs
Vikas Manocha
- [U-Boot] [PATCH 6/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()
Vikas Manocha
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Uri Mashiach
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Uri Mashiach
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Uri Mashiach
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 2/2] imx7: spl: Add support for MMC3, SD3 and NAND boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices
Eran Matityahu
- [U-Boot] [PATCH 1/2] iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()
Eran Matityahu
- [U-Boot] [PATCH 2/2] i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro
Eran Matityahu
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
- [U-Boot] SquashFS and FIT images
Mathew McBride
- [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/
Bin Meng
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Bin Meng
- [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table
Bin Meng
- [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning
Bin Meng
- [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Bin Meng
- [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning
Bin Meng
- [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Bin Meng
- [U-Boot] X86 Broadwell-DE override FSP configuration
Bin Meng
- [U-Boot] X86 Broadwell-DE override FSP configuration
Bin Meng
- [U-Boot] [PATCH 1/1] Broadwell-DE Implementation
Bin Meng
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Bin Meng
- [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86
Bin Meng
- [U-Boot] [PATCH] x86: quark: Fix unused warnings
Bin Meng
- [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86
Bin Meng
- [U-Boot] [PATCH] x86: quark: Fix unused warnings
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Bin Meng
- [U-Boot] [PATCH 1/2] x86: acpi: Use an API to get the ACPI RSDP table address
Bin Meng
- [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()
Bin Meng
- [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH 1/2] x86: acpi: Use an API to get the ACPI RSDP table address
Bin Meng
- [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()
Bin Meng
- [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'
Bin Meng
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Nishanth Menon
- [U-Boot] [RFC PATCH 0/2] ARM: v7: Enable basic framework for supporting bits for CVE-2017-5715
Nishanth Menon
- [U-Boot] [RFC PATCH 1/2] ARM: Introduce ability to enable ACR::IBE on Cortex-A8 for CVE-2017-5715
Nishanth Menon
- [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715
Nishanth Menon
- [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715
Nishanth Menon
- [U-Boot] [PATCH] board: tbs2910: add private imx config
Soeren Moch
- [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses
Alberto Sánchez Molero
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Anand Moon
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Anand Moon
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Anand Moon
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Anand Moon
- [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed
Anand Moon
- [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes
Anand Moon
- [U-Boot] [PATCH 2/2] ARM: dts: exynos5: add the interrupt-parent property
Anand Moon
- [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator
Anand Moon
- [U-Boot] [PATCH] mmc: fix the wrong dislabing clock
Anand Moon
- [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling
Anand Moon
- [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11
Anand Moon
- [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver
Anand Moon
- [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator
Anand Moon
- [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time
Anand Moon
- [U-Boot] U-boot can verify an HW signature?
Saverio Mori
- [U-Boot] U-boot can verify an HW signature?
Saverio Mori
- [U-Boot] U-boot can verify an HW signature?
Saverio Mori
- [U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig
Eric Nelson
- [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support
Eric Nelson
- [U-Boot] [PATCH] mx6memcal: fix comment in board header file
Eric Nelson
- [U-Boot] [RFC PATCH] SPL: allow fall-back to SDP boot
Eric Nelson
- [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses
Robert Nelson
- [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses
Robert Nelson
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jun Nie
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Jun Nie
- [U-Boot] [PATCH 1/6] sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3
Jun Nie
- [U-Boot] [PATCH 2/6] sunxi: musb: Add fifo config for H3
Jun Nie
- [U-Boot] [PATCH 3/6] sunxi: musb: Enable OTG device clock for H3
Jun Nie
- [U-Boot] [PATCH 4/6] sunxi: musb: Hack dynamic fifo support for H3 OTG
Jun Nie
- [U-Boot] [PATCH 5/6] sunxi: usb_phy: Clear PHYCTL register before writing
Jun Nie
- [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support
Jun Nie
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Jun Nie
- [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support
Jun Nie
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Jun Nie
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Jun Nie
- [U-Boot] [[PATCH v2] 0/8] sunxi: Enable OTG peripheral and host mode on H3
Jun Nie
- [U-Boot] [[PATCH v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT
Jun Nie
- [U-Boot] [[PATCH v2] 2/8] sunxi: musb: Add fifo config for H3
Jun Nie
- [U-Boot] [[PATCH v2] 3/8] sunxi: Fix USB PHY index for H3/H5/A64
Jun Nie
- [U-Boot] [[PATCH v2] 4/8] sunxi: musb: Hack dynamic fifo support for H3 OTG
Jun Nie
- [U-Boot] [[PATCH v2] 5/8] sunxi: musb: Enable OTG device clock for H3
Jun Nie
- [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing
Jun Nie
- [U-Boot] [[PATCH v2] 7/8] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64
Jun Nie
- [U-Boot] [[PATCH v2] 8/8] sunxi: H3: set different otg base address per mode
Jun Nie
- [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree
Jun Nie
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jun Nie
- [U-Boot] [PATCH] mmc: Poll for broken card detection case
Jun Nie
- [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse
Jun Nie
- [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse
Jun Nie
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Sean Nyekjaer
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Sean Nyekjær
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Sean Nyekjær
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Sean Nyekjær
- [U-Boot] [PATCH v3 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v4 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v4 01/25] arm: imx: hab: Make authenticate_image return int
Bryan O'Donoghue
- [U-Boot] [PATCH v4 02/25] arm: imx: hab: Fix authenticate_image result code
Bryan O'Donoghue
- [U-Boot] [PATCH v4 03/25] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
Bryan O'Donoghue
- [U-Boot] [PATCH v4 04/25] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
Bryan O'Donoghue
- [U-Boot] [PATCH v4 05/25] arm: imx: hab: Move IVT_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v4 06/25] arm: imx: hab: Move CSF_PAD_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v4 07/25] arm: imx: hab: Fix authenticate_image input parameters
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7
Bryan O'Donoghue
- [U-Boot] [PATCH v4 09/25] arm: imx: hab: Add IVT header definitions
Bryan O'Donoghue
- [U-Boot] [PATCH v4 10/25] arm: imx: hab: Add IVT header verification
Bryan O'Donoghue
- [U-Boot] [PATCH v4 11/25] arm: imx: hab: Verify IVT self matches calculated address
Bryan O'Donoghue
- [U-Boot] [PATCH v4 12/25] arm: imx: hab: Only call ROM once headers are verified
Bryan O'Donoghue
- [U-Boot] [PATCH v4 13/25] arm: imx: hab: Print CSF based on IVT descriptor
Bryan O'Donoghue
- [U-Boot] [PATCH v4 14/25] arm: imx: hab: Print additional IVT elements during debug
Bryan O'Donoghue
- [U-Boot] [PATCH v4 15/25] arm: imx: hab: Define rvt_check_target()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 16/25] arm: imx: hab: Implement hab_rvt_check_target
Bryan O'Donoghue
- [U-Boot] [PATCH v4 17/25] arm: imx: hab: Add a hab_rvt_check_target to image auth
Bryan O'Donoghue
- [U-Boot] [PATCH v4 18/25] arm: imx: hab: Print HAB event log only after calling ROM
Bryan O'Donoghue
- [U-Boot] [PATCH v4 19/25] arm: imx: hab: Make internal functions and data static
Bryan O'Donoghue
- [U-Boot] [PATCH v4 20/25] arm: imx: hab: Prefix authenticate_image with imx_hab
Bryan O'Donoghue
- [U-Boot] [PATCH v4 21/25] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
Bryan O'Donoghue
- [U-Boot] [PATCH v4 22/25] arm: imx: hab: Make imx_hab_is_enabled global
Bryan O'Donoghue
- [U-Boot] [PATCH v4 23/25] arm: imx: hab: Define rvt_failsafe()
Bryan O'Donoghue
- [U-Boot] [PATCH v4 24/25] arm: imx: hab: Implement hab_rvt_failsafe
Bryan O'Donoghue
- [U-Boot] [PATCH v4 25/25] arm: imx: hab: Add hab_failsafe console command
Bryan O'Donoghue
- [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7
Bryan O'Donoghue
- [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v5 01/24] arm: imx: hab: Make authenticate_image return int
Bryan O'Donoghue
- [U-Boot] [PATCH v5 02/24] arm: imx: hab: Fix authenticate_image result code
Bryan O'Donoghue
- [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
Bryan O'Donoghue
- [U-Boot] [PATCH v5 04/24] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
Bryan O'Donoghue
- [U-Boot] [PATCH v5 05/24] arm: imx: hab: Move IVT_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v5 06/24] arm: imx: hab: Move CSF_PAD_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v5 07/24] arm: imx: hab: Fix authenticate_image input parameters
Bryan O'Donoghue
- [U-Boot] [PATCH v5 08/24] arm: imx: hab: Add IVT header definitions
Bryan O'Donoghue
- [U-Boot] [PATCH v5 09/24] arm: imx: hab: Add IVT header verification
Bryan O'Donoghue
- [U-Boot] [PATCH v5 10/24] arm: imx: hab: Verify IVT self matches calculated address
Bryan O'Donoghue
- [U-Boot] [PATCH v5 11/24] arm: imx: hab: Only call ROM once headers are verified
Bryan O'Donoghue
- [U-Boot] [PATCH v5 12/24] arm: imx: hab: Print CSF based on IVT descriptor
Bryan O'Donoghue
- [U-Boot] [PATCH v5 13/24] arm: imx: hab: Print additional IVT elements during debug
Bryan O'Donoghue
- [U-Boot] [PATCH v5 14/24] arm: imx: hab: Define rvt_check_target()
Bryan O'Donoghue
- [U-Boot] [PATCH v5 15/24] arm: imx: hab: Implement hab_rvt_check_target
Bryan O'Donoghue
- [U-Boot] [PATCH v5 16/24] arm: imx: hab: Add a hab_rvt_check_target to image auth
Bryan O'Donoghue
- [U-Boot] [PATCH v5 17/24] arm: imx: hab: Print HAB event log only after calling ROM
Bryan O'Donoghue
- [U-Boot] [PATCH v5 18/24] arm: imx: hab: Make internal functions and data static
Bryan O'Donoghue
- [U-Boot] [PATCH v5 19/24] arm: imx: hab: Prefix authenticate_image with imx_hab
Bryan O'Donoghue
- [U-Boot] [PATCH v5 20/24] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
Bryan O'Donoghue
- [U-Boot] [PATCH v5 21/24] arm: imx: hab: Make imx_hab_is_enabled global
Bryan O'Donoghue
- [U-Boot] [PATCH v5 22/24] arm: imx: hab: Define rvt_failsafe()
Bryan O'Donoghue
- [U-Boot] [PATCH v5 23/24] arm: imx: hab: Implement hab_rvt_failsafe
Bryan O'Donoghue
- [U-Boot] [PATCH v5 24/24] arm: imx: hab: Add hab_failsafe console command
Bryan O'Donoghue
- [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
Bryan O'Donoghue
- [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer
Bryan O'Donoghue
- [U-Boot] [PATCH v6 01/25] arm: imx: hab: Make authenticate_image return int
Bryan O'Donoghue
- [U-Boot] [PATCH v6 02/25] arm: imx: hab: Fix authenticate_image result code
Bryan O'Donoghue
- [U-Boot] [PATCH v6 03/25] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail
Bryan O'Donoghue
- [U-Boot] [PATCH v6 04/25] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail
Bryan O'Donoghue
- [U-Boot] [PATCH v6 05/25] arm: imx: hab: Move IVT_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v6 06/25] arm: imx: hab: Move CSF_PAD_SIZE to hab.h
Bryan O'Donoghue
- [U-Boot] [PATCH v6 07/25] arm: imx: hab: Fix authenticate_image input parameters
Bryan O'Donoghue
- [U-Boot] [PATCH v6 08/25] arm: imx: hab: Add IVT header definitions
Bryan O'Donoghue
- [U-Boot] [PATCH v6 09/25] arm: imx: hab: Add IVT header verification
Bryan O'Donoghue
- [U-Boot] [PATCH v6 10/25] arm: imx: hab: Verify IVT self matches calculated address
Bryan O'Donoghue
- [U-Boot] [PATCH v6 11/25] arm: imx: hab: Only call ROM once headers are verified
Bryan O'Donoghue
- [U-Boot] [PATCH v6 12/25] arm: imx: hab: Print CSF based on IVT descriptor
Bryan O'Donoghue
- [U-Boot] [PATCH v6 13/25] arm: imx: hab: Print additional IVT elements during debug
Bryan O'Donoghue
- [U-Boot] [PATCH v6 14/25] arm: imx: hab: Define rvt_check_target()
Bryan O'Donoghue
- [U-Boot] [PATCH v6 15/25] arm: imx: hab: Implement hab_rvt_check_target
Bryan O'Donoghue
- [U-Boot] [PATCH v6 16/25] arm: imx: hab: Add a hab_rvt_check_target to image auth
Bryan O'Donoghue
- [U-Boot] [PATCH v6 17/25] arm: imx: hab: Print HAB event log only after calling ROM
Bryan O'Donoghue
- [U-Boot] [PATCH v6 18/25] arm: imx: hab: Make internal functions and data static
Bryan O'Donoghue
- [U-Boot] [PATCH v6 19/25] arm: imx: hab: Prefix authenticate_image with imx_hab
Bryan O'Donoghue
- [U-Boot] [PATCH v6 20/25] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled
Bryan O'Donoghue
- [U-Boot] [PATCH v6 21/25] arm: imx: hab: Make authenticate_image() return zero on open boards
Bryan O'Donoghue
- [U-Boot] [PATCH v6 22/25] arm: imx: hab: Make imx_hab_is_enabled global
Bryan O'Donoghue
- [U-Boot] [PATCH v6 23/25] arm: imx: hab: Define rvt_failsafe()
Bryan O'Donoghue
- [U-Boot] [PATCH v6 24/25] arm: imx: hab: Implement hab_rvt_failsafe
Bryan O'Donoghue
- [U-Boot] [PATCH v6 25/25] arm: imx: hab: Add hab_failsafe console command
Bryan O'Donoghue
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH 1/9] optee: Add lib entries for sharing OPTEE code across ports
Bryan O'Donoghue
- [U-Boot] [PATCH 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE
Bryan O'Donoghue
- [U-Boot] [PATCH 3/9] optee: Make OPTEE_TZDRAM_BASE a mandatory define
Bryan O'Donoghue
- [U-Boot] [PATCH 4/9] optee: Add optee_image_get_entry_point()
Bryan O'Donoghue
- [U-Boot] [PATCH 5/9] optee: Add optee_image_get_load_addr()
Bryan O'Donoghue
- [U-Boot] [PATCH 6/9] tools: mkimage: add optee image type
Bryan O'Donoghue
- [U-Boot] [PATCH 7/9] optee: Add optee_verify_bootm_image()
Bryan O'Donoghue
- [U-Boot] [PATCH 8/9] optee: Improve error printout
Bryan O'Donoghue
- [U-Boot] [PATCH 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot
Bryan O'Donoghue
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Bryan O'Donoghue
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] warp7: add UART6 support
Bryan O'Donoghue
- [U-Boot] [PATCH v2 0/9] Add new OPTEE bootm support to u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v2 1/9] optee: Add lib entries for sharing OPTEE code across ports
Bryan O'Donoghue
- [U-Boot] [PATCH v2 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE
Bryan O'Donoghue
- [U-Boot] [PATCH v2 3/9] optee: Add CONFIG_OPTEE_TZDRAM_BASE
Bryan O'Donoghue
- [U-Boot] [PATCH v2 4/9] optee: Add optee_image_get_entry_point()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 5/9] optee: Add optee_image_get_load_addr()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type
Bryan O'Donoghue
- [U-Boot] [PATCH v2 7/9] optee: Add optee_verify_bootm_image()
Bryan O'Donoghue
- [U-Boot] [PATCH v2 8/9] optee: Improve error printout
Bryan O'Donoghue
- [U-Boot] [PATCH v2 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot
Bryan O'Donoghue
- [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type
Bryan O'Donoghue
- [U-Boot] [PATCH v2 8/9] optee: Improve error printout
Bryan O'Donoghue
- [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type
Bryan O'Donoghue
- [U-Boot] [PATCH v3 0/9] Add new OPTEE bootm support to u-boot
Bryan O'Donoghue
- [U-Boot] [PATCH v3 1/9] optee: Add lib entries for sharing OPTEE code across ports
Bryan O'Donoghue
- [U-Boot] [PATCH v3 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE
Bryan O'Donoghue
- [U-Boot] [PATCH v3 3/9] optee: Add CONFIG_OPTEE_TZDRAM_BASE
Bryan O'Donoghue
- [U-Boot] [PATCH v3 4/9] optee: Add optee_image_get_entry_point()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 5/9] optee: Add optee_image_get_load_addr()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 6/9] tools: mkimage: add optee image type
Bryan O'Donoghue
- [U-Boot] [PATCH v3 7/9] optee: Add optee_verify_bootm_image()
Bryan O'Donoghue
- [U-Boot] [PATCH v3 8/9] optee: Add error printout
Bryan O'Donoghue
- [U-Boot] [PATCH v3 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Bryan O'Donoghue
- [U-Boot] [PATCH 2/2] warp7 : run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Bryan O'Donoghue
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Bryan O'Donoghue
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Bryan O'Donoghue
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Bryan O'Donoghue
- [U-Boot] [PATCH v2 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH v2 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Bryan O'Donoghue
- [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH v3 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH v3 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Bryan O'Donoghue
- [U-Boot] [RESEND PATCH v3 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [RESEND PATCH v3 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Bryan O'Donoghue
- [U-Boot] [RESEND PATCH v3 2/2] imx: mx7: run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH v4 0/2] Fix CAAM for TrustZone enable for warp7
Bryan O'Donoghue
- [U-Boot] [PATCH v4 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone
Bryan O'Donoghue
- [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG
Bryan O'Donoghue
- [U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC
Chris Packham
- [U-Boot] [PATCH v4 1/7] driver/ddr: Add support for setting timing in hws_topology_map
Chris Packham
- [U-Boot] [PATCH] ddr: marvell: only assert M_ODT[0] on write for a single CS
Chris Packham
- [U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
Chris Packham
- [U-Boot] [PATCH v2 1/4] ddr: marvell: only assert M_ODT[0] on write for a single CS
Chris Packham
- [U-Boot] [PATCH v2 2/4] ddr: marvell: use correct TREFI value
Chris Packham
- [U-Boot] [PATCH v2 3/4] ddr: marvell: update additional ODT setting
Chris Packham
- [U-Boot] [PATCH v2 4/4] ddr: marvell: update ddr controller init and freq
Chris Packham
- [U-Boot] [PATCH v4] spi: kirkwood_spi: implement workaround for FE-9144572
Chris Packham
- [U-Boot] SquashFS and FIT images
Chris Packham
- [U-Boot] [PATCH 0/7] Add support of SD3.0 UHS modes for ZynqMP
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 1/7] mmc: sdhci: Add support for disabling clock
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 2/7] mmc: sdhci: Handle execute tuning command in sdhci_send_command
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 3/7] sdhci: Add new sdhci ops for platform specific tuning and delays
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 4/7] mmc: sdhci: Invoke platform specific tuning and delay routines
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 5/7] mmc : sdhci: Read capabilities register1 and update host caps
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 6/7] mmc: zynq_sdhci: Add support for SD3.0
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 2/7] mmc: sdhci: Handle execute tuning command in sdhci_send_command
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 3/7] sdhci: Add new sdhci ops for platform specific tuning and delays
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 4/7] mmc: sdhci: Invoke platform specific tuning and delay routines
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 5/7] mmc : sdhci: Read capabilities register1 and update host caps
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 6/7] mmc: zynq_sdhci: Add support for SD3.0
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 1/3] nand: arasan_nfc: Move common ecc struct initialization init routine
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 2/3] nand: arasan_nfc: Add support for ondie ecc
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 3/3] nand: arasan_nfc: Use the calculated ecc address for updating ecc register
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 0/3] Add new targets for Xilinx ZynqMP SoC
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 1/3] xilinx: zynqmp: Add new target with only qspi enabled
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 2/3] xilinx: zynqmp: Add new target with only nand enabled
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 3/3] xilinx: zynqmp: Add new target with only emmc enabled
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock
Siva Durga Prasad Paladugu
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Siva Durga Prasad Paladugu
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Siva Durga Prasad Paladugu
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH 1/4] ARC: read pae_exist bit from MMU BCR
Eugeniy Paltsev
- [U-Boot] [PATCH 2/4] ARC: ARCv2: CACHE: fix work without IOC
Eugeniy Paltsev
- [U-Boot] [PATCH 3/4] ARC: CACHE: disable IOC by default
Eugeniy Paltsev
- [U-Boot] [PATCH 4/4] ARC: CACHE: fix style violations
Eugeniy Paltsev
- [U-Boot] [PATCH] ARC: HSDK: hang on panic
Eugeniy Paltsev
- [U-Boot] [PATCH 1/4] ARC: HSDK: CGU: update AXI, TUN, ARC clock options
Eugeniy Paltsev
- [U-Boot] [PATCH 2/4] ARC: HSDK: CGU: fix using plat data instead of priv data
Eugeniy Paltsev
- [U-Boot] [PATCH 3/4] ARC: HSDK: CGU: add 'Hz' when printing clock frequency
Eugeniy Paltsev
- [U-Boot] [PATCH 4/4] ARC: HSDK: DTS: add cgu-clk node
Eugeniy Paltsev
- [U-Boot] [PATCH] ARC: invalidate i$ and d$ at startup code
Eugeniy Paltsev
- [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree
Eugeniy Paltsev
- [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off
Eugeniy Paltsev
- [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off
Eugeniy Paltsev
- [U-Boot] [PATCH] ARC: AXS10x: DTS: remove unused interrupts properties
Eugeniy Paltsev
- [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off
Eugeniy Paltsev
- [U-Boot] standalone example on mips/ath79/QCA9558/Tp-Link Archer-c7
Arvid Picciani
- [U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure
Vinitha Pillai-B57223
- [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment
Kostya Porotchkin
- [U-Boot] [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router
Kostya Porotchkin
- [U-Boot] mrvl_uart.sh and Turris Omnia (was: [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router)
Kostya Porotchkin
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output
Kostya Porotchkin
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate
Kostya Porotchkin
- [U-Boot] On writing .ext4 image to MMC
Vincent Prince
- [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
Andre Przywara
- [U-Boot] [PATCH] sunxi: Pine64: temporarily remove extra Pine64 non-plus DT
Andre Przywara
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] [PATCH 1/3] sunxi: gpio: add missing compatible strings
Andre Przywara
- [U-Boot] [PATCH 2/3] net: sun8i-emac: support new pinctrl DT bindings
Andre Przywara
- [U-Boot] [PATCH 3/3] net: sun8i-emac: add support for new EMAC DT binding
Andre Przywara
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Andre Przywara
- [U-Boot] EFI helloworld build fails with new compilers
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
André Przywara
- [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse
André Przywara
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Vignesh R
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Vignesh R
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Vignesh R
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Vignesh R
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Vignesh R
- [U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"
Vignesh R
- [U-Boot] [PATCH 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"
Vignesh R
- [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
Vignesh R
- [U-Boot] [PATCH v2 06/13] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support
Vignesh R
- [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
Vignesh R
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH v2 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"
Vignesh R
- [U-Boot] [PATCH v2 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"
Vignesh R
- [U-Boot] [PATCH v2 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
Vignesh R
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Vignesh R
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH v3 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Vignesh R
- [U-Boot] [PATCH v3 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"
Vignesh R
- [U-Boot] [PATCH v3 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"
Vignesh R
- [U-Boot] [PATCH v3 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
Vignesh R
- [U-Boot] [PATCH 1/2] ARM: k2g: Add pinmux data for QSPI on K2G ICE
Vignesh R
- [U-Boot] [PATCH 2/2] ARM: dts: keystone-k2g-ice: Add support for QSPI
Vignesh R
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
RB23
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
RB23
- [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez
- [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware
Jorge Ramirez
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez
- [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed
Jorge Ramirez
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez
- [U-Boot] sdhci - review?
Jorge Ramirez
- [U-Boot] sdhci - review?
Jorge Ramirez
- [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez
- [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez
- [U-Boot] [PATCH 01/03] spmi: msm: display the PMIC Arb version (debug)
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/03] poplar: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/03] dm: core: parse chosen node
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 01/05] env: enable accessing the environment in an EXT4 partition
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/05] arm: mach-snapdragon: refactor clock driver
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 04/05] db820c: enable pmic gpios for pm8994
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 01/07] db410c: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 05/07] db410c: use the device tree parsed by the lk loader.
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 06/07] db410c: add reserved-memory node to dts
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 01/03] spmi: msm: display the PMIC Arb version (debug)
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/03] poplar: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/03] dm: core: parse chosen node
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 01/05] env: enable accessing the environment in an EXT4 partition
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/05] arm: mach-snapdragon: refactor clock driver
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 04/05] db820c: enable pmic gpios for pm8994
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 01/07] db410c: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 05/07] db410c: use the device tree parsed by the lk loader.
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 06/07] db410c: add reserved-memory node to dts
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 01/03] spmi: msm: display the PMIC Arb version (debug)
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 02/03] poplar: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 03/03] dm: core: parse chosen node
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 01/05] env: enable accessing the environment in an EXT4 partition
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 02/05] arm: mach-snapdragon: refactor clock driver
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 04/05] db820c: enable pmic gpios for pm8994
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 05/05] db820c: stop autoboot when vol- pressed
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 01/07] db410c: configs: increase gunzip buffer size for the kernel
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 02/07] db410c: update wlan and bt mac addresses from firmware
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 03/07] db410c: replace reset driver with psci
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 05/07] db410c: use the device tree parsed by the lk loader.
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 06/07] db410c: add reserved-memory node to dts
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v1 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH 0/8] Bring NAND support to Nintendo NES Classic
Miquel Raynal
- [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value
Miquel Raynal
- [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error
Miquel Raynal
- [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms
Miquel Raynal
- [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning
Miquel Raynal
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH 6/8] configs: Add NAND support for NES Classic
Miquel Raynal
- [U-Boot] [PATCH 7/8] sunxi: dts: Add NAND node to sun8i DTSI
Miquel Raynal
- [U-Boot] [PATCH 8/8] sunxi: dts: Enable NAND on NES classic
Miquel Raynal
- [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value
Miquel Raynal
- [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value
Miquel Raynal
- [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error
Miquel Raynal
- [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms
Miquel Raynal
- [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning
Miquel Raynal
- [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning
Miquel Raynal
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH] fdt: Fixup only valid memory banks
Thierry Reding
- [U-Boot] [PATCH] fdt: Fixup only valid memory banks
Thierry Reding
- [U-Boot] [PATCHv2 00/15] Updates / improvements to bx50v3 support
Sebastian Reichel
- [U-Boot] [PATCHv2 01/15] net: e1000: add support for writing to EEPROM
Sebastian Reichel
- [U-Boot] [PATCHv2 02/15] net: e1000: split e1000_read_mac_addr
Sebastian Reichel
- [U-Boot] [PATCHv2 03/15] net: e1000: implement eth_write_hwaddr
Sebastian Reichel
- [U-Boot] [PATCHv2 04/15] rtc: adding RX8010SJ rtc driver
Sebastian Reichel
- [U-Boot] [PATCHv2 05/15] board: ge: Enable access to i2c bus 1 and 2
Sebastian Reichel
- [U-Boot] [PATCHv2 06/15] configs: Add network device support for bx50v3 products
Sebastian Reichel
- [U-Boot] [PATCHv2 07/15] board: ge: bx50v3: move FEC MAC address programming to driver
Sebastian Reichel
- [U-Boot] [PATCHv2 08/15] board: ge: bx50v3: program MAC address to I210
Sebastian Reichel
- [U-Boot] [PATCHv2 09/15] board: ge: bx50v3: Enable hardware watchdog
Sebastian Reichel
- [U-Boot] [PATCHv2 10/15] board: ge: bx50v3: Support FIT and select configuration based on VPD
Sebastian Reichel
- [U-Boot] [PATCHv2 11/15] config: ge_bx50v3: read boot script
Sebastian Reichel
- [U-Boot] [PATCHv2 12/15] configs: ge_bx50v3: enable bootcount
Sebastian Reichel
- [U-Boot] [PATCHv2 13/15] board: ge: bx50v3: mount rootfs read-only
Sebastian Reichel
- [U-Boot] [PATCHv2 14/15] configs: ge_bx50v3: automatic partition selection and video output failure message
Sebastian Reichel
- [U-Boot] [PATCHv2 15/15] board,ge,bx50v3 - rtc time validation
Sebastian Reichel
- [U-Boot] [PATCH] ARM: omap3: evm: Do not relocate FDT address
Tom Rini
- [U-Boot] [PATCH] Travis-CI: Split 't208xrdb t4qds t102*'-job into separate jobs
Tom Rini
- [U-Boot] [PATCH v3 6/6] board: ti: k2g: Make ddr3* declarations as static
Tom Rini
- [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] [U-Boot, 1/3] ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730}
Tom Rini
- [U-Boot] [U-Boot, 3/3] ARM: omap3: evm: Refactor 'board_eth_init'
Tom Rini
- [U-Boot] power: tps65910: replace error() by pr_err()
Tom Rini
- [U-Boot] [U-Boot, 1/1] dm: core: remove orphaned parameter description in platdata.h
Tom Rini
- [U-Boot] [U-Boot, v4, 2/3] ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530, 3730}
Tom Rini
- [U-Boot] ARM: omap3: evm: Do not relocate FDT address
Tom Rini
- [U-Boot] configs: am335x_boneblack: Bring back missed bootcmd
Tom Rini
- [U-Boot] [ANN] U-Boot v2018.01-rc3 released
Tom Rini
- [U-Boot] U-Boot and Builman Toolchains
Tom Rini
- [U-Boot] [PATCH] boards: amlogic: khadas-vim: Typo fixup
Tom Rini
- [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function
Tom Rini
- [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
Tom Rini
- [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL
Tom Rini
- [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/
Tom Rini
- [U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary
Tom Rini
- [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL
Tom Rini
- [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL
Tom Rini
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL
Tom Rini
- [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL
Tom Rini
- [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL
Tom Rini
- [U-Boot] [PATCH] GPIO: pca953x: Rework to not include commands in SPL
Tom Rini
- [U-Boot] [PATCH] GPIO: tca642x: Rework to not include commands in SPL
Tom Rini
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
Tom Rini
- [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Tom Rini
- [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation
Tom Rini
- [U-Boot] Making lack-of DM conversion noisy warning
Tom Rini
- [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] [ANN] U-Boot v2018.01 is released
Tom Rini
- [U-Boot] u-boot/next and HS MMC patches
Tom Rini
- [U-Boot] [PATCH v2 01/12] riscv: cpu: Add nx25 to support RISC-V
Tom Rini
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Tom Rini
- [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
Tom Rini
- [U-Boot] [PATCH 1/4] ARM: qemu-arm: Add support for AArch64
Tom Rini
- [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm
Tom Rini
- [U-Boot] [PATCH 3/4] Travis-CI: Download ARM64 version of GRUB as well
Tom Rini
- [U-Boot] [PATCH 4/4] Travis-CI: Add job for running test.py on qemu_arm64
Tom Rini
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Tom Rini
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Tom Rini
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PULL] Please pull from u-boot-rockchip/master
Tom Rini
- [U-Boot] [PATCH v1 6/6] dts: dra7x: enable host on USB2 for all the platforms of the DRA7 family
Tom Rini
- [U-Boot] [PATCH v1 1/6] board: ti: dra7xx-evm: turn on USB clocks in late init stage
Tom Rini
- [U-Boot] [PATCH v1 5/6] configs: enable DM_USB for all the platforms of the DRA7 family
Tom Rini
- [U-Boot] ext4: cache first extent index blocks (#06343)
Tom Rini
- [U-Boot] api: bootelf: go: flush cache before starting
Tom Rini
- [U-Boot] BugFix: PXE Boot fails on old arm kernel with initrd without FDT
Tom Rini
- [U-Boot] [GIT PULL] ZFS: lundman/master
Tom Rini
- [U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [U-Boot, 2/2] arm: Exercise v7_arch_cp15_set_acr even without errata fixups
Tom Rini
- [U-Boot] [U-Boot, RESEND, 01/14] ARM: DTS: stm32: add STM32F429 SoC and its Discovery board support
Tom Rini
- [U-Boot] [U-Boot, RESEND, 02/14] ARM: DTS: stm32: add stm32f429-disco-u-boot dts file
Tom Rini
- [U-Boot] [U-Boot, RESEND, 03/14] board: stm32f429-discovery: switch to DM STM32 sdram driver
Tom Rini
- [U-Boot] [U-Boot, RESEND, 04/14] pinctrl: stm32: add stm32f4 pinctrl compatible strings
Tom Rini
- [U-Boot] [U-Boot, RESEND, 05/14] configs: stm32f429-disco: enable MISC, STM32_RCC, DM_RESET and STM32_RESET
Tom Rini
- [U-Boot] [U-Boot, RESEND, 06/14] board: stm32f429-disco: switch to DM STM32 serial driver
Tom Rini
- [U-Boot] [U-Boot, RESEND, 07/14] mach-stm32: stmf32f4: timer: remove clock_get() call
Tom Rini
- [U-Boot] [U-Boot, RESEND, 08/14] board: stm32f429-disco: switch to DM STM32 clock driver
Tom Rini
- [U-Boot] [U-Boot, RESEND, 09/14] board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver
Tom Rini
- [U-Boot] [U-Boot, RESEND, 10/14] ram: stm32: add memory mapping selection support
Tom Rini
- [U-Boot] [U-Boot, RESEND, 11/14] ARM: DTS: add STM32F469 Discovery board support
Tom Rini
- [U-Boot] [U-Boot, RESEND, 12/14] ARM: DTS: stm32: add stm32f469-disco-u-boot dts file
Tom Rini
- [U-Boot] [U-Boot, RESEND, 13/14] board: stm32: add stm32f469-discovery board support
Tom Rini
- [U-Boot] [U-Boot, RESEND, 14/14] ARM: DTS: stm32: add SDIO controller support for stm32f469-disco
Tom Rini
- [U-Boot] [U-Boot, RESEND, 1/2] ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-disco
Tom Rini
- [U-Boot] [U-Boot, RESEND, 2/2] configs: stm32f746-disco: enable MMC related flags
Tom Rini
- [U-Boot] BCM283x ALT5 function for JTAG pins
Tom Rini
- [U-Boot] PCI: Drop CONFIG_TSI108_PCI
Tom Rini
- [U-Boot] Travis-CI: Split 't208xrdb t4qds t102*'-job into separate jobs
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: Drop unreferenced CONFIG_MACH_* defines
Tom Rini
- [U-Boot] [U-Boot,2/2] sh: Drop unreferenced CONFIG_* defines
Tom Rini
- [U-Boot] linux/kernel.h: Add ALIGN_DOWN macro
Tom Rini
- [U-Boot] fat write: Fixed a problem with the case of file names when writing files
Tom Rini
- [U-Boot] [U-Boot, 2/3] build: Drop CONFIG_SPL_BUILD guards in some cases
Tom Rini
- [U-Boot] configs: am57xx_evm: fix ethernet phy configuration
Tom Rini
- [U-Boot] [PATCH v2 2/4] ARM: Document AArch64 version of qemu-arm
Tom Rini
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Tom Rini
- [U-Boot] [GIT PULL] ZFS: lundman/master
Tom Rini
- [U-Boot] [PATCH] Relax check for valid environment in __hwconfig
Tom Rini
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] Please pull u-boot-video/master
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] [PATCH 3/9] optee: Make OPTEE_TZDRAM_BASE a mandatory define
Tom Rini
- [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation
Tom Rini
- [U-Boot] [PATCH] checkpatch: Ignore 'short' Kconfig help entries
Tom Rini
- [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 02/12] riscv: nx25: lib: Add relative lib funcs to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 03/12] riscv: nx25: dts: Add AE250 dts to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 04/12] riscv: nx25: include: Add header files to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 05/12] riscv: Add Kconfig to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 06/12] riscv: board: Add nx25-ae250 to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 07/12] riscv: configs: Add nx25-ae250.h to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 08/12] riscv: defconfig: Add nx25-ae250 defconfig to support RISC-V
Tom Rini
- [U-Boot] [U-Boot,v2,09/12] riscv: tools: Prelink u-boot
Tom Rini
- [U-Boot] [U-Boot,v2,10/12] riscv: Support standalone
Tom Rini
- [U-Boot] [U-Boot, v2, 11/12] riscv: Modify generic codes to support RISC-V
Tom Rini
- [U-Boot] [U-Boot, v2, 12/12] riscv: doc: Add relative doc to describe RISC-V
Tom Rini
- [U-Boot] travis.yml: Support RISC-V
Tom Rini
- [U-Boot] Pull request, u-boot-tegra/master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [U-Boot, v6, 1/2] spl: Remove static declaration on spl_mmc_find_device function
Tom Rini
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [U-Boot, v1, 01/03] spmi: msm: display the PMIC Arb version (debug)
Tom Rini
- [U-Boot] [U-Boot, v1, 02/03] poplar: configs: increase gunzip buffer size for the kernel
Tom Rini
- [U-Boot] [U-Boot,v1,03/03] dm: core: parse chosen node
Tom Rini
- [U-Boot] [U-Boot, v1, 01/05] env: enable accessing the environment in an EXT4 partition
Tom Rini
- [U-Boot] [U-Boot, v1, 02/05] arm: mach-snapdragon: refactor clock driver
Tom Rini
- [U-Boot] [U-Boot, v1, 03/05] db820c: add qualcomm dragonboard 820C support
Tom Rini
- [U-Boot] [U-Boot, v1, 04/05] db820c: enable pmic gpios for pm8994
Tom Rini
- [U-Boot] [U-Boot, v1, 05/05] db820c: stop autoboot when vol- pressed
Tom Rini
- [U-Boot] [U-Boot, v1, 01/07] db410c: configs: increase gunzip buffer size for the kernel
Tom Rini
- [U-Boot] [U-Boot, v1, 02/07] db410c: update wlan and bt mac addresses from firmware
Tom Rini
- [U-Boot] [U-Boot, v1, 03/07] db410c: replace reset driver with psci
Tom Rini
- [U-Boot] [U-Boot, v1, 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Tom Rini
- [U-Boot] [U-Boot, v1, 05/07] db410c: use the device tree parsed by the lk loader.
Tom Rini
- [U-Boot] [U-Boot, v1, 06/07] db410c: add reserved-memory node to dts
Tom Rini
- [U-Boot] [U-Boot, v1, 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory
Tom Rini
- [U-Boot] checkpatch.pl checking
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Tom Rini
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Tom Rini
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Tom Rini
- [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
Tom Rini
- [U-Boot] Pull request, u-boot-tegra/master
Tom Rini
- [U-Boot] [PATCH] tools: Update python "help" tests to cope with "more" oddities
Tom Rini
- [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command
Tom Rini
- [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
Tom Rini
- [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11
Tom Rini
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Tom Rini
- [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system
Tom Rini
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] Individual files dual licenses
Tom Rini
- [U-Boot] Individual files dual licenses
Tom Rini
- [U-Boot] Individual files dual licenses
Tom Rini
- [U-Boot] Individual files dual licenses
Tom Rini
- [U-Boot] [U-Boot, 01/23] mmc: omap_hsmmc: cleanup clock configuration
Tom Rini
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Tom Rini
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Tom Rini
- [U-Boot] [PATCH 0/9] log: Support control over the log output format
Tom Rini
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Tom Rini
- [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [U-Boot, v2, 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"
Tom Rini
- [U-Boot] [U-Boot, v2, 2/5] omap: Update the base address of the MMC controllers
Tom Rini
- [U-Boot] [U-Boot, v2, 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)
Tom Rini
- [U-Boot] [U-Boot, v2, 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable
Tom Rini
- [U-Boot] [U-Boot, v2, 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit
Tom Rini
- [U-Boot] [U-Boot, v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM
Tom Rini
- [U-Boot] [U-Boot, v3, 1/6] configs: k2g_evm: Allocate more space for u-boot
Tom Rini
- [U-Boot] [U-Boot, v3, 2/6] board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support
Tom Rini
- [U-Boot] [U-Boot, v3, 3/6] tools: omapimage: Fix mismatch of image size in header
Tom Rini
- [U-Boot] [U-Boot, v3, 4/6] arm: am33xx: Avoid writing into reserved DPLL divider
Tom Rini
- [U-Boot] [U-Boot, v3, 5/6] board: ti: dra76: mux wakeup2 as gpio1_2
Tom Rini
- [U-Boot] [U-Boot, v3, 6/6] board: ti: k2g: Make ddr3* declarations as static
Tom Rini
- [U-Boot] dt-bindings: leds: adopt Linux PCA9532 binding constants
Tom Rini
- [U-Boot] [U-Boot, v2, 01/13] drivers: dma: ti-edma3: add support for memory fill
Tom Rini
- [U-Boot] [U-Boot, v2, 02/13] arm: emif-common: Add ecc specific emif registers
Tom Rini
- [U-Boot] [U-Boot, v2, 03/13] arm: emif-common: Add suppport for enabling ECC
Tom Rini
- [U-Boot] [U-Boot, v2, 04/13] arm: keystone: Move cmd_ddr3 to a common place
Tom Rini
- [U-Boot] [U-Boot, v2, 05/13] cmd: ti: Generalize cmd_ddr3 command
Tom Rini
- [U-Boot] [U-Boot, v2, 06/13] arm: dra762: Add support for device package identification
Tom Rini
- [U-Boot] [U-Boot, v2, 07/13] board: ti: am574x-idk: Add epprom support
Tom Rini
- [U-Boot] [U-Boot, v2, 08/13] board: ti: am574x-idk: Add hw data support
Tom Rini
- [U-Boot] [U-Boot, v2, 09/13] board: ti: am574x-idk: Add ddr data support
Tom Rini
- [U-Boot] [U-Boot, v2, 10/13] board: ti: am574x-idk: Update pinmux using latest PMT
Tom Rini
- [U-Boot] [U-Boot,v2,11/13] board: ti: am57xx: Enable CMD_DDR3
Tom Rini
- [U-Boot] [U-Boot, v2, 12/13] ARM: dts: am574x-idk: Add initial support
Tom Rini
- [U-Boot] [U-Boot, v2, 13/13] env: ti: Select dtb name for dra76x and am574
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoard
Tom Rini
- [U-Boot] DA850evm: Remove dead code
Tom Rini
- [U-Boot] [U-Boot, 1/1] fs: remove distractive message in fs_read()
Tom Rini
- [U-Boot] [U-Boot, 1/1] fs/fat: remove distractive message in file_fat_read_at()
Tom Rini
- [U-Boot] cmd: pmic: update help description
Tom Rini
- [U-Boot] GPIO: pca953x: Rework to not include commands in SPL
Tom Rini
- [U-Boot] GPIO: tca642x: Rework to not include commands in SPL
Tom Rini
- [U-Boot] [U-Boot, 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM
Tom Rini
- [U-Boot] ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4
Tom Rini
- [U-Boot] rpi_0_w: Add configs consistent with RpI3
Tom Rini
- [U-Boot] arm: am33xx: security: Fix size calculation on header
Tom Rini
- [U-Boot] arm: mach-omap2: Remove secure certificate name printing
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] ARM: qemu-arm: Add support for AArch64
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] ARM: Document AArch64 version of qemu-arm
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] Travis-CI: Download ARM64 version of GRUB as well
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] Travis-CI: Add job for running test.py on qemu_arm64
Tom Rini
- [U-Boot] pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros
Tom Rini
- [U-Boot] nds32: Drop unreferenced CONFIG_ADP_AG101P
Tom Rini
- [U-Boot] m68k: Drop unreferenced CONFIG_* defines
Tom Rini
- [U-Boot] [U-Boot, 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c
Tom Rini
- [U-Boot] [U-Boot, 2/2] configs: stm32: move config flag from defconfig to Kconfig
Tom Rini
- [U-Boot] powerpc: Drop unreferenced CONFIG_* defines
Tom Rini
- [U-Boot] checkpatch: Ignore 'short' Kconfig help entries
Tom Rini
- [U-Boot] configs: keystone2: env: Fix burn_uboot_spi command
Tom Rini
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v2] arm: add support for PDU001
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Tom Rini
- [U-Boot] [PATCH v2] arm: add support for PDU001
Tom Rini
- [U-Boot] [RFC] SPDX License text updates
Tom Rini
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [RFC] SPDX License text updates
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Tom Rini
- [U-Boot] ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATA
Tom Rini
- [U-Boot] [U-Boot, V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_USB_MUSB_HCD et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_DAVINCI_SPI to Kconfig
Tom Rini
- [U-Boot] [U-Boot,1/3] Convert CONFIG_TWL4030_USB to Kconfig
Tom Rini
- [U-Boot] [U-Boot,2/3] Convert CONFIG_OMAP_USB_PHY to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 3/3] Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
Tom Rini
- [U-Boot] [U-Boot,1/5] fs: Migrate ext4 to Kconfig
Tom Rini
- [U-Boot] [U-Boot, 2/5] ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE
Tom Rini
- [U-Boot] [U-Boot,3/5] env: ENV_IS_IN_FAT improvements
Tom Rini
- [U-Boot] [U-Boot, 4/5] fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description
Tom Rini
- [U-Boot] [U-Boot,5/5] fs: fat: Drop CONFIG_SUPPORT_VFAT
Tom Rini
- [U-Boot] [U-Boot,V5] Convert CONFIG_SOC_DA8XX et al to Kconfig
Tom Rini
- [U-Boot] travis-ci: Add qemu-x86_64 target
Tom Rini
- [U-Boot] travis-ci: Add qemu-x86_64 target
Tom Rini
- [U-Boot] [PATCH v3] arm: add support for PDU001
Tom Rini
- [U-Boot] [PATCH 0/9] log: Support control over the log output format
Tom Rini
- [U-Boot] [PULL] efi patch queue 2018-01-23
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [GIT PULL] Please pull u-boot-mmc master
Tom Rini
- [U-Boot] [PATCH v4] arm: add support for PDU001
Tom Rini
- [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()
Tom Rini
- [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree
Tom Rini
- [U-Boot] [PATCH v2 3/4] travis.yml: fix 'set +e' in build script
Tom Rini
- [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32
Tom Rini
- [U-Boot] Please pull u-boot-coldfire/master
Tom Rini
- [U-Boot] Pull request v2: u-boot-spi/master
Tom Rini
- [U-Boot] [PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [U-Boot, v3, 01/15] cmd: nvedit: Get rid of the env lookup
Tom Rini
- [U-Boot] [U-Boot, v3, 02/15] env: Rename env_driver_lookup_default and env_get_default_location
Tom Rini
- [U-Boot] [U-Boot, v3, 03/15] env: Pass additional parameters to the env lookup function
Tom Rini
- [U-Boot] [U-Boot, v3, 04/15] env: Make the env save message a bit more explicit
Tom Rini
- [U-Boot] [U-Boot, v3, 05/15] env: Make it explicit where we're loading our environment from
Tom Rini
- [U-Boot] [U-Boot, v3, 06/15] env: fat: Make the debug messages play a little nicer
Tom Rini
- [U-Boot] [U-Boot, v3, 07/15] env: mmc: Make the debug messages play a little nicer
Tom Rini
- [U-Boot] [U-Boot, v3, 08/15] env: common: Make the debug messages play a little nicer
Tom Rini
- [U-Boot] [U-Boot,v3,09/15] env: Support multiple environments
Tom Rini
- [U-Boot] [U-Boot, v3, 10/15] env: Initialise all the environments
Tom Rini
- [U-Boot] [U-Boot, v3, 11/15] env: mmc: depends on the MMC framework
Tom Rini
- [U-Boot] [U-Boot, v3, 12/15] env: Allow to build multiple environments in Kconfig
Tom Rini
- [U-Boot] [U-Boot,v3,13/15] env: Mark env_get_location as weak
Tom Rini
- [U-Boot] [U-Boot, v3, 14/15] sunxi: Transition from the MMC to a FAT-based environment
Tom Rini
- [U-Boot] [U-Boot, v3, 15/15] env: sunxi: Enable FAT-based environment support by default
Tom Rini
- [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets
Tom Rini
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Tom Rini
- [U-Boot] [PATCH 3/4] fs: btrfs: Fix printf format character warning
Tom Rini
- [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()
Tom Rini
- [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()
Tom Rini
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Tom Rini
- [U-Boot] [PATCH] usb: Remove unused hcd_name variable
Tom Rini
- [U-Boot] [PATCH] x86: quark: Fix unused warnings
Tom Rini
- [U-Boot] [PATCH] usb: Remove isp116x-hcd support
Tom Rini
- [U-Boot] [PATCH] usb: host: Drop unused hcd_name from r8a66597-hcd.c
Tom Rini
- [U-Boot] [PATCH v2 3/4] fs: btrfs: Fix printf format character warning
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/rmobile-mx
Tom Rini
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Tom Rini
- [U-Boot] [PATCH v3 0/6] assert() is almost used in the same way as BUG_ON(), except:
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Initialize SHA buffer size var in passwd_abort
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 1/7] gpio: pca953x_gpio: Fix style violations
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 2/7] gpio: pca953x_gpio: Make live-tree compatible
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 3/7] gpio: mpc85xx_gpio: Fix style violations
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 4/7] gpio: mpc85xx: Rename driver file to mpc8xxx
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 5/7] gpio: mpc8xxx: Rename Kconfig option, structures, and functions
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 6/7] gpio: mpc8xxx: Make compatible with more SoCs
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 7/7] gpio: mpc8xxx: Make live-tree compatible
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 1/4] include: dm: Fix 'devioe'/'devuce' typos
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 2/4] serial: ns16550: Fix style violation
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 3/4] common: board_f: Fix style violations
Tom Rini
- [U-Boot] [U-Boot, RESEND, v2, 4/4] common: board_r: Fix style violations
Tom Rini
- [U-Boot] arm: mach-omap2: Pass args to secure ROM in SRAM in SPL
Tom Rini
- [U-Boot] arm: bootm-fdt.c: fix compiler warning
Tom Rini
- [U-Boot] [U-Boot, 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot
Tom Rini
- [U-Boot] [U-Boot, 2/6] clk: stm32: retrieve external oscillator frequency from DT
Tom Rini
- [U-Boot] [U-Boot, 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series
Tom Rini
- [U-Boot] [U-Boot, 4/6] board: stm32: Add stm32f429-evaluation board support
Tom Rini
- [U-Boot] [U-Boot, 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support
Tom Rini
- [U-Boot] [U-Boot, 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file
Tom Rini
- [U-Boot] atomic-long: Fix warnings on arm64
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] clk: clk_stm32f: Remove STMMAC clock setup
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
Tom Rini
- [U-Boot] tools: remove unused ret
Tom Rini
- [U-Boot] [U-Boot, 1/2] configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl
Tom Rini
- [U-Boot] clk: clk_stm32f: Fix PLLSAICFGR_PLLSAIP_4 divider value
Tom Rini
- [U-Boot] fs: btrfs: Fix unaligned memory accesses
Tom Rini
- [U-Boot] spl: use different BOARD_INIT MACRO for spl and tpl
Tom Rini
- [U-Boot] [U-Boot, 1/2] distro bootcmd: Allow board defined UBI partition and volume names
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC support
Tom Rini
- [U-Boot] host-tools: use python2 explicitly for shebang
Tom Rini
- [U-Boot] [U-Boot, v3, 1/6] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Tom Rini
- [U-Boot] [U-Boot,v3,2/6] libfdt: fix <linux/libfdt.h>
Tom Rini
- [U-Boot] [U-Boot, v3, 3/6] tools: include necessary headers explicitly
Tom Rini
- [U-Boot] [U-Boot, v3, 4/6] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h
Tom Rini
- [U-Boot] [U-Boot, v3, 5/6] libfdt: migrate libfdt.h to a wrapper + U-Boot own code
Tom Rini
- [U-Boot] [U-Boot, v3, 6/6] libfdt: migrate include/libfdt_env.h to a wrapper
Tom Rini
- [U-Boot] powerpc: Drop CONFIG_WALNUT and other related dead code
Tom Rini
- [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver
Tom Rini
- [U-Boot] [U-Boot,v3,2/2] mmc: Add bcm2835 sdhost controller
Tom Rini
- [U-Boot] [U-Boot,v4] arm: add support for PDU001
Tom Rini
- [U-Boot] am33xx: board: Call spl_early_init() to support sdram_init()
Tom Rini
- [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails
Tom Rini
- [U-Boot] [U-Boot, v3, 02/15] rpi: Remove runtime disabling support for serial
Tom Rini
- [U-Boot] [U-Boot, v3, 03/15] serial: bcm283x_mu: Remove support for post-init disabling
Tom Rini
- [U-Boot] [U-Boot, v3, 04/15] rpi: Determine PL011/Mini-UART availability at runtime
Tom Rini
- [U-Boot] [U-Boot, v3, 05/15] serial_bcm283x_mu: Convert to dev_read
Tom Rini
- [U-Boot] [U-Boot,v3,06/15] serial_bcm283x_mu: Always skip init
Tom Rini
- [U-Boot] [U-Boot, v3, 07/15] serial_bcm283x_mu: Fail loading if not muxed
Tom Rini
- [U-Boot] [U-Boot,v3,08/15] pl01x: Convert to dev_read
Tom Rini
- [U-Boot] [U-Boot, v3, 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 11/15] pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 12/15] bcm2835_mu_serial: Convert to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v3, 13/15] MAINTAINERS: Take over BCM2835 maintainership
Tom Rini
- [U-Boot] [U-Boot, v3, 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver
Tom Rini
- [U-Boot] [U-Boot,v3,15/15] bcm2835_pinctrl: Probe pre-reloc
Tom Rini
- [U-Boot] [U-Boot, v2] spl: add option to disable SPL banner output
Tom Rini
- [U-Boot] omap3_logic: Clean up I2C pin muxing.
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PULL] efi patch queue 2018-01-28
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH] serial: Make full device search optional
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] aes: Allow non-zero initialization vector
Tom Rini
- [U-Boot] spl: include timezone in banner
Tom Rini
- [U-Boot] [U-Boot, 1/4] mvpp2: Fix warning over 32bit vs 64bit targets
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] fs: btrfs: Fix printf format character warning
Tom Rini
- [U-Boot] kconfig: revert change that was not needed for -Wformat-security
Tom Rini
- [U-Boot] board: stm32: Fix stm32f746-disco boot
Tom Rini
- [U-Boot] clk: clk_stm32: Add .set_rate callback
Tom Rini
- [U-Boot] [ANN] U-Boot v2018.03-rc1 released
Tom Rini
- [U-Boot] [PATCH] env: sf: fix return value of env_sf_load
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [U-Boot, v2] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V4] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig
Tom Rini
- [U-Boot] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
Tom Rini
- [U-Boot] [PATCH] davinci: Fix omapl138_lcdk builds
Tom Rini
- [U-Boot] [GIT PULL] Xilinx patches for v2018.03
Tom Rini
- [U-Boot] [PATCH] davinci: Fix omapl138_lcdk builds
Tom Rini
- [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree
Maxime Ripard
- [U-Boot] [PATCH] ARM: sunxi: Remove left-over cd-inverted property from pcDuino3
Maxime Ripard
- [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support
Maxime Ripard
- [U-Boot] [PATCH 03/14] env: Pass additional parameters to the env lookup function
Maxime Ripard
- [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH 11/11] sunxi: Add limit with the MMC environment
Maxime Ripard
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes
Maxime Ripard
- [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support
Maxime Ripard
- [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes
Maxime Ripard
- [U-Boot] [PATCH v2 01/12] dfu: select HASH
Maxime Ripard
- [U-Boot] [PATCH v2 02/12] cmd: crc32: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 03/12] cmd: unzip: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 04/12] cmd: loadb: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 05/12] cmd: loads: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 06/12] cmd: misc: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 07/12] video: bpp8: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 08/12] video: bpp16: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 09/12] net: regex: Disable by default on sunXi
Maxime Ripard
- [U-Boot] [PATCH v2 10/12] sunxi: imply CONFIG_OF_LIBFDT_OVERLAY
Maxime Ripard
- [U-Boot] [PATCH v2 11/12] Makefile: Add size check to the u-boot.itb make target
Maxime Ripard
- [U-Boot] [PATCH v2 12/12] sunxi: Add limit with the MMC environment
Maxime Ripard
- [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
Maxime Ripard
- [U-Boot] [PATCH v2 01/15] cmd: nvedit: Get rid of the env lookup
Maxime Ripard
- [U-Boot] [PATCH v2 02/15] env: Rename env_driver_lookup_default and env_get_default_location
Maxime Ripard
- [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function
Maxime Ripard
- [U-Boot] [PATCH v2 04/15] env: Make the env save message a bit more explicit
Maxime Ripard
- [U-Boot] [PATCH v2 05/15] env: Make it explicit where we're loading our environment from
Maxime Ripard
- [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v2 07/15] env: mmc: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v2 08/15] env: common: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v2 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH v2 10/15] env: Initialise all the environments
Maxime Ripard
- [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework
Maxime Ripard
- [U-Boot] [PATCH v2 12/15] env: Allow to build multiple environments in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH v2 14/15] sunxi: Transition from the MMC to a FAT-based environment
Maxime Ripard
- [U-Boot] [PATCH v2 15/15] env: sunxi: Enable FAT-based environment support by default
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Fix display timing flags
Maxime Ripard
- [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
Maxime Ripard
- [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi
Maxime Ripard
- [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function
Maxime Ripard
- [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB
Maxime Ripard
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Maxime Ripard
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB
Maxime Ripard
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH v3 00/15] env: Multiple env support and env transition for sunxi
Maxime Ripard
- [U-Boot] [PATCH v3 01/15] cmd: nvedit: Get rid of the env lookup
Maxime Ripard
- [U-Boot] [PATCH v3 02/15] env: Rename env_driver_lookup_default and env_get_default_location
Maxime Ripard
- [U-Boot] [PATCH v3 03/15] env: Pass additional parameters to the env lookup function
Maxime Ripard
- [U-Boot] [PATCH v3 04/15] env: Make the env save message a bit more explicit
Maxime Ripard
- [U-Boot] [PATCH v3 05/15] env: Make it explicit where we're loading our environment from
Maxime Ripard
- [U-Boot] [PATCH v3 06/15] env: fat: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v3 07/15] env: mmc: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v3 08/15] env: common: Make the debug messages play a little nicer
Maxime Ripard
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
Maxime Ripard
- [U-Boot] [PATCH v3 10/15] env: Initialise all the environments
Maxime Ripard
- [U-Boot] [PATCH v3 11/15] env: mmc: depends on the MMC framework
Maxime Ripard
- [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig
Maxime Ripard
- [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH v3 14/15] sunxi: Transition from the MMC to a FAT-based environment
Maxime Ripard
- [U-Boot] [PATCH v3 15/15] env: sunxi: Enable FAT-based environment support by default
Maxime Ripard
- [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value
Maxime Ripard
- [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error
Maxime Ripard
- [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms
Maxime Ripard
- [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning
Maxime Ripard
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Maxime Ripard
- [U-Boot] [PATCH 6/8] configs: Add NAND support for NES Classic
Maxime Ripard
- [U-Boot] [PATCH 7/8] sunxi: dts: Add NAND node to sun8i DTSI
Maxime Ripard
- [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
Maxime Ripard
- [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check
Maxime Ripard
- [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA
Maxime Ripard
- [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties
Maxime Ripard
- [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus
Maxime Ripard
- [U-Boot] [PATCH 1/3] sunxi: remove allwinner prefix in pinctrl nodes
Maxime Ripard
- [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5
Maxime Ripard
- [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero
Maxime Ripard
- [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS
Maxime Ripard
- [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5
Maxime Ripard
- [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero
Maxime Ripard
- [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties
Maxime Ripard
- [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check
Maxime Ripard
- [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing
Maxime Ripard
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Maxime Ripard
- [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table
Maxime Ripard
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Pine64: temporarily remove extra Pine64 non-plus DT
Maxime Ripard
- [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse
Maxime Ripard
- [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing
Maxime Ripard
- [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig
Maxime Ripard
- [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak
Maxime Ripard
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Maxime Ripard
- [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table
Maxime Ripard
- [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Maxime Ripard
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
Maxime Ripard
- [U-Boot] [PATCH v2 1/4] env: make env_import(_redund) return 0 on success, not 1
Maxime Ripard
- [U-Boot] [PATCH v2 2/4] env: move more common code to env_import_redund
Maxime Ripard
- [U-Boot] [PATCH v2 3/4] env: make env drivers propagate env_import return value
Maxime Ripard
- [U-Boot] [PATCH v2 4/4] env: sf: use env_import_redund to simplify env_sf_load
Maxime Ripard
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Maxime Ripard
- [U-Boot] "fdt" commands in extlinux.conf ?
Peter Robinson
- [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig
Peter Robinson
- [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed
Peter Robinson
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Peter Robinson
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Peter Robinson
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Peter Robinson
- [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE
Peter Robinson
- [U-Boot] compilation issue pine64
Peter Robinson
- [U-Boot] FW: u-boot v2016 vs v2013
Peter Robinson
- [U-Boot] AM3703 does not boot from MicroSD card
Peter Robinson
- [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment
Stefan Roese
- [U-Boot] [PATCH] tools: Add Marvell recovery image download script
Stefan Roese
- [U-Boot] [PATCH 1/4] arm64: a37xx: use disto defaults
Stefan Roese
- [U-Boot] [PATCH 2/4] arm64: a37xx: add distro compatible env vars
Stefan Roese
- [U-Boot] [PATCH 3/4] arm64: a37xx: defconfigs: enable CONFIG_DISTRO_DEFAULTS
Stefan Roese
- [U-Boot] [PATCH 4/4] arm64: a37xx: use distro bootcmd
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: ClearFog: document boot selection switches, update UART
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs
Stefan Roese
- [U-Boot] [PATCH] pinctrl: mvebu: Make drivers depend on the pinctrl framework
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Stefan Roese
- [U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router
Stefan Roese
- [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis
Stefan Roese
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate
Stefan Roese
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output
Stefan Roese
- [U-Boot] [PATCH] dm: serial: Initialize serial console only when it wasn't already configured
Stefan Roese
- [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets
Stefan Roese
- [U-Boot] [PATCH v3 01/26] cfi_flash: Fix space between function name and parenthesis
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate
Stefan Roese
- [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 00/11] mips: bmips: add SPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 02/11] drivers: spi: allow limiting reads
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 03/11] drivers: spi: consider command bytes when sending transfers
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 04/11] dm: spi: add BCM63xx SPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 05/11] mips: bmips: add bcm63xx-spi driver support for BCM6338
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 06/11] mips: bmips: add bcm63xx-spi driver support for BCM6348
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 07/11] mips: bmips: add bcm63xx-spi driver support for BCM6358
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 08/11] mips: bmips: add bcm63xx-spi driver support for BCM3380
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 09/11] mips: bmips: add bcm63xx-spi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 11/11] mips: bmips: enable the SPI flash on the Netgear CG3100D
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 00/13] mips: bmips: add SPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 03/13] wait_bit: remove old wait_for_bit function
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 04/13] drivers: spi: allow limiting reads
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 05/13] drivers: spi: consider command bytes when sending transfers
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 06/13] dm: spi: add BCM63xx SPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 07/13] mips: bmips: add bcm63xx-spi driver support for BCM6338
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 08/13] mips: bmips: add bcm63xx-spi driver support for BCM6348
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 09/13] mips: bmips: add bcm63xx-spi driver support for BCM6358
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 10/13] mips: bmips: add bcm63xx-spi driver support for BCM3380
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 11/13] mips: bmips: add bcm63xx-spi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 12/13] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Álvaro Fernández Rojas
- [U-Boot] [PATCH v7 13/13] mips: bmips: enable the SPI flash on the Netgear CG3100D
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 00/12] mips: bmips: add SPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 03/12] drivers: spi: allow limiting reads
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 04/12] drivers: spi: consider command bytes when sending transfers
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 05/12] dm: spi: add BCM63xx SPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D
Álvaro Fernández Rojas
- [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v5 0/4] mips: bmips: add HSSPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v5 1/4] dm: spi: add BCM63xx HSSPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v5 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328
Álvaro Fernández Rojas
- [U-Boot] [PATCH v5 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v5 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 00/12] mips: bmips: add SPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 03/12] drivers: spi: allow limiting reads
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 04/12] drivers: spi: consider command bytes when sending transfers
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 05/12] dm: spi: add BCM63xx SPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Álvaro Fernández Rojas
- [U-Boot] [PATCH v9 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 1/4] dm: spi: add BCM63xx HSSPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v6 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un
Álvaro Fernández Rojas
- [U-Boot] [PATCH] mips: bmips: increment SYS_MALLOC_F_LEN
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/3] dm: cpu: bmips: add BCM6368 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/3] MIPS: add BMIPS Comtrend WAP-5813n board
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 0/3] mips: bmips: add BCM6368 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6368 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Comtrend WAP-5813n board
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/4] dm: cpu: bmips: add BCM6318 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/4] dm: ram: bmips: add BCM6318 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH 4/4] MIPS: add BMIPS Comtrend AR-5315u board
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 0/4] mips: bmips: add BCM6318 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 4/4] MIPS: add BMIPS Comtrend AR-5315u board
Álvaro Fernández Rojas
- [U-Boot] Pull request: u-boot-spi/master
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 00/12] mips: bmips: add SPI support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 03/12] drivers: spi: allow limiting reads
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 04/12] drivers: spi: consider command bytes when sending transfers
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 05/12] dm: spi: add BCM63xx SPI driver
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Álvaro Fernández Rojas
- [U-Boot] [PATCH v10 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D
Álvaro Fernández Rojas
- [U-Boot] Pull request: u-boot-spi/master
Álvaro Fernández Rojas
- [U-Boot] [PATCH 0/3] mips: bmips: add BCM6362 SoC support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 1/3] dm: cpu: bmips: add BCM6362 support
Álvaro Fernández Rojas
- [U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6362 SoC family
Álvaro Fernández Rojas
- [U-Boot] [PATCH 3/3] MIPS: add BMIPS Netgear DGND3700v2 board
Álvaro Fernández Rojas
- [U-Boot] MIPS relocation DT error
Álvaro Fernández Rojas
- [U-Boot] MIPS relocation DT error
Álvaro Fernández Rojas
- [U-Boot] [PATCH] mips: bmips: select OF_EMBED for all boards
Álvaro Fernández Rojas
- [U-Boot] Uboot as x86_64 EFI payload
Javier Santos Romo
- [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings
Jason Rush
- [U-Boot] [PATCH v5 1/5] spi: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v5 3/5] config: cadence_spi: Remove defines read from DT
Jason Rush
- [U-Boot] [PATCH v5 4/5] dts: k2g: Clean-up indentation
Jason Rush
- [U-Boot] [PATCH v5 5/5] dts: cadence_spi: Update documentation for DT bindings
Jason Rush
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jason Rush
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jason Rush
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jason Rush
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jason Rush
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jason Rush
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings
Jason Rush
- [U-Boot] [PATCH v6 1/4] spi: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v6 2/4] dts: cadence_spi: Sync DT bindings with Linux
Jason Rush
- [U-Boot] [PATCH v6 3/4] config: cadence_spi: Remove defines read from DT
Jason Rush
- [U-Boot] [PATCH v6 4/4] dts: cadence_spi: Update documentation for DT bindings
Jason Rush
- [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings
Jason Rush
- [U-Boot] [PATCH 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock
Hannes Schmelzer
- [U-Boot] [PATCH 1/6] mach-omap2: add AM335x Display PLL register definition
Hannes Schmelzer
- [U-Boot] [PATCH 2/6] am335x-fb: cosmetic: update-copyright
Hannes Schmelzer
- [U-Boot] [PATCH 3/6] am335x-fb: cosmetic: fix coding style
Hannes Schmelzer
- [U-Boot] [PATCH 4/6] am335x-fb: setup display PLL
Hannes Schmelzer
- [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider
Hannes Schmelzer
- [U-Boot] [PATCH 6/6] board/BuR: drop LCDC clock manipulation from board code
Hannes Schmelzer
- [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider
Hannes Schmelzer
- [U-Boot] [PATCH v2 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock
Hannes Schmelzer
- [U-Boot] [PATCH v2 1/6] mach-omap2: add AM335x Display PLL register definition
Hannes Schmelzer
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Hannes Schmelzer
- [U-Boot] [PATCH v2 3/6] am335x-fb: cosmetic: fix coding style
Hannes Schmelzer
- [U-Boot] [PATCH v2 4/6] am335x-fb: setup display PLL
Hannes Schmelzer
- [U-Boot] [PATCH v2 5/6] board/BuR: provide real clock-frequency instead a divider
Hannes Schmelzer
- [U-Boot] [PATCH v2 6/6] board/BuR: drop LCDC clock manipulation from board code
Hannes Schmelzer
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Hannes Schmelzer
- [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright
Hannes Schmelzer
- [U-Boot] [PATCH v3 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock
Hannes Schmelzer
- [U-Boot] [PATCH v3 1/6] mach-omap2: add AM335x Display PLL register definition
Hannes Schmelzer
- [U-Boot] [PATCH v3 2/6] am335x-fb: cosmetic: update-copyright
Hannes Schmelzer
- [U-Boot] [PATCH v3 3/6] am335x-fb: cosmetic: fix coding style
Hannes Schmelzer
- [U-Boot] [PATCH v3 4/6] am335x-fb: setup display PLL
Hannes Schmelzer
- [U-Boot] [PATCH v3 5/6] board/BuR: provide real clock-frequency instead a divider
Hannes Schmelzer
- [U-Boot] [PATCH v3 6/6] board/BuR: drop LCDC clock manipulation from board code
Hannes Schmelzer
- [U-Boot] Antwort: [PATCH 3/5] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig
Hannes Schmelzer
- [U-Boot] Antwort: [PATCH 4/5] Convert CONFIG_SPL_NAND_BASE et al to Kconfig
Hannes Schmelzer
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Heiko Schocher
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Heiko Schocher
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Heiko Schocher
- [U-Boot] checkpatch.pl checking
Heiko Schocher
- [U-Boot] [PATCH 1/2] i2c: lpi2c: do not add 4 for bus seq
Heiko Schocher
- [U-Boot] [PATCH 2/2] imx: mx7ulp: modify lpi2c seq number
Heiko Schocher
- [U-Boot] [PATCH] i2c: mxc_i2c: Use or operation
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Heiko Schocher
- [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data
Heiko Schocher
- [U-Boot] [PATCH] arm: bootm-fdt.c: fix compiler warning
Heiko Schocher
- [U-Boot] [PATCH 1/1] fs: remove distractive message in fs_read()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] fs/fat: remove distractive message in file_fat_read_at()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] MAINTAINERS: correct entry for lib/efi*/
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] MAINTAINERS: correct entry for lib/efi*/
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Heinrich Schuchardt
- [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allocate correct memory type for EFI image
Heinrich Schuchardt
- [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND
Heinrich Schuchardt
- [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController
Heinrich Schuchardt
- [U-Boot] [PATCH 16/16] efi_loader: consistently use efi_handle_t for handles
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing
Heinrich Schuchardt
- [U-Boot] [PATCH v2 03/16] efi: Add error checking for efi_init_obj_list()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 08/16] sandbox: Add a setjmp() implementation
Heinrich Schuchardt
- [U-Boot] [PATCH v2 06/16] efi: sandbox: Adjust memory usage for sandbox
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/1] vsprintf.c: add EFI device path printing
Heinrich Schuchardt
- [U-Boot] [PATCH v3 00/16] efi_loader: implement driver management
Heinrich Schuchardt
- [U-Boot] [PATCH v3 01/16] efi_selftest: colored test output
Heinrich Schuchardt
- [U-Boot] [PATCH v3 02/16] efi_loader: simplify efi_remove_all_protocols
Heinrich Schuchardt
- [U-Boot] [PATCH v3 03/16] efi_selftest: do not try to close device path protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 04/16] efi_loader: list of open protocol infos
Heinrich Schuchardt
- [U-Boot] [PATCH v3 05/16] efi_loader: open_info in OpenProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 06/16] efi_loader: open_info in CloseProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 07/16] efi_loader: implement OpenProtocolInformation
Heinrich Schuchardt
- [U-Boot] [PATCH v3 08/16] efi_loader: debug output installed device path
Heinrich Schuchardt
- [U-Boot] [PATCH v3 09/16] efi_loader: implement ConnectController
Heinrich Schuchardt
- [U-Boot] [PATCH v3 10/16] efi_loader: fix signature of efi_disconnect_controller
Heinrich Schuchardt
- [U-Boot] [PATCH v3 11/16] efi_loader: implement DisconnectController
Heinrich Schuchardt
- [U-Boot] [PATCH v3 12/16] efi_loader: disconnect controllers in UninstallProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 13/16] efi_selftest: remove todo in manage protocols
Heinrich Schuchardt
- [U-Boot] [PATCH v3 14/16] efi_selftest: remove todo in device path test
Heinrich Schuchardt
- [U-Boot] [PATCH v3 15/16] efi_selftest: test for (Dis)ConnectController
Heinrich Schuchardt
- [U-Boot] [PATCH v3 16/16] efi_loader: consistently use efi_handle_t for handles
Heinrich Schuchardt
- [U-Boot] [PATCH 00/17] efi_loader: enable EFI driver provided block device
Heinrich Schuchardt
- [U-Boot] [PATCH 01/17] efi_loader: return NULL from device path functions
Heinrich Schuchardt
- [U-Boot] [PATCH 02/17] efi_loader: address of the simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH 03/17] efi_loader: correct find simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH 04/17] efi_loader: print device path when entering efi_load_image
Heinrich Schuchardt
- [U-Boot] [PATCH 05/17] efi_loader: allocate correct memory type for EFI image
Heinrich Schuchardt
- [U-Boot] [PATCH 06/17] efi_loader: check tables in helloworld.efi
Heinrich Schuchardt
- [U-Boot] [PATCH 07/17] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH 08/17] efi_loader: efi_disk_register: correctly determine if_type_name
Heinrich Schuchardt
- [U-Boot] [PATCH 09/17] efi_loader: make efi_block_io_guid a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH 10/17] efi_loader: provide a function to create a partition node
Heinrich Schuchardt
- [U-Boot] [PATCH 11/17] efi_loader: make efi_disk_create_partitions a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH 12/17] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
Heinrich Schuchardt
- [U-Boot] [PATCH 13/17] efi_loader: provide function to get last node of a device path
Heinrich Schuchardt
- [U-Boot] [PATCH 14/17] efi_loader: provide links between devices EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH 15/17] tools: provide a tool to convert a binary file to an include
Heinrich Schuchardt
- [U-Boot] [PATCH 16/17] efi_selftest: provide a test for block io
Heinrich Schuchardt
- [U-Boot] [PATCH 17/17] efi_driver: EFI block driver
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] dm: video: Correct color ANSI escape sequence support
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_selftest: test start image
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: text output for device path end node
Heinrich Schuchardt
- [U-Boot] UEFI on u-boot
Heinrich Schuchardt
- [U-Boot] UEFI on u-boot
Heinrich Schuchardt
- [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails
Heinrich Schuchardt
- [U-Boot] [BUG] x86: Could not get phandle node for /gpios at 0:num-gpios(cell 0)
Heinrich Schuchardt
- [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
Heinrich Schuchardt
- [U-Boot] [PATCH v2 01/18] efi_loader: return NULL from device path functions
Heinrich Schuchardt
- [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v2 03/18] efi_loader: correct find simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v2 04/18] efi_loader: print device path when entering efi_load_image
Heinrich Schuchardt
- [U-Boot] [PATCH v2 05/18] efi_loader: allocate correct memory type for EFI image
Heinrich Schuchardt
- [U-Boot] [PATCH v2 06/18] efi_loader: check tables in helloworld.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 07/18] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH v2 08/18] efi_loader: efi_disk_register: correctly determine if_type_name
Heinrich Schuchardt
- [U-Boot] [PATCH v2 09/18] efi_loader: make efi_block_io_guid a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH v2 10/18] efi_loader: provide a function to create a partition node
Heinrich Schuchardt
- [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
Heinrich Schuchardt
- [U-Boot] [PATCH v2 13/18] efi_loader: provide function to get last node of a device path
Heinrich Schuchardt
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH v2 15/18] tools: provide a tool to convert a binary file to an include
Heinrich Schuchardt
- [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver
Heinrich Schuchardt
- [U-Boot] [PATCH v2 17/18] efi_selftest: provide a test for block io
Heinrich Schuchardt
- [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/2] efi_selftest: test start image
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/2] efi_selftest: test start image
Heinrich Schuchardt
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v3 0/2] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] efi_loader: correctly call images
Heinrich Schuchardt
- [U-Boot] [PATCH v3 2/2] efi_selftest: test start image
Heinrich Schuchardt
- [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memory
Heinrich Schuchardt
- [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/1] efi_selftest: test start image
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/1] efi_loader: implement OpenProtocolInformation
Heinrich Schuchardt
- [U-Boot] [PATCH v3 00/18] efi_loader: enable EFI driver provided block device
Heinrich Schuchardt
- [U-Boot] [PATCH v3 01/18] efi_loader: return NULL from device path functions
Heinrich Schuchardt
- [U-Boot] [PATCH v3 02/18] efi_loader: address of the simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 03/18] efi_loader: correct find simple file system protocol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 04/18] efi_loader: print device path when entering efi_load_image
Heinrich Schuchardt
- [U-Boot] [PATCH v3 05/18] efi_loader: allocate correct memory type for EFI image
Heinrich Schuchardt
- [U-Boot] [PATCH v3 06/18] efi_loader: check tables in helloworld.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v3 07/18] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH v3 08/18] efi_loader: efi_disk_register: correctly determine if_type_name
Heinrich Schuchardt
- [U-Boot] [PATCH v3 09/18] efi_loader: make efi_block_io_guid a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 10/18] efi_loader: provide a function to create a partition node
Heinrich Schuchardt
- [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol
Heinrich Schuchardt
- [U-Boot] [PATCH v3 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
Heinrich Schuchardt
- [U-Boot] [PATCH v3 13/18] efi_loader: provide function to get last node of a device path
Heinrich Schuchardt
- [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH v3 15/18] efi_loader: add check_tpl parameter to efi_signal_event
Heinrich Schuchardt
- [U-Boot] [PATCH v3 16/18] efi_loader: fix ExitBootServices
Heinrich Schuchardt
- [U-Boot] [PATCH v3 17/18] efi_driver: EFI block driver
Heinrich Schuchardt
- [U-Boot] [PATCH v3 18/18] efi_selftest: provide a test for block io
Heinrich Schuchardt
- [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] log: add category LOGC_EFI
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: reduce noise in test output for device trees
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: allow creation of more device part nodes
Heinrich Schuchardt
- [U-Boot] [PATCH v4 0/2] efi_loader: enable EFI driver provided block device
Heinrich Schuchardt
- [U-Boot] [PATCH v4 1/2] efi_driver: EFI block driver
Heinrich Schuchardt
- [U-Boot] [PATCH v4 2/2] efi_selftest: provide a test for block io
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: add missing LF in test output
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI
Heinrich Schuchardt
- [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.
Heinrich Schuchardt
- [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: fix comments indent_string()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: catch misspelled bootefi subcommand
Heinrich Schuchardt
- [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles
Heinrich Schuchardt
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_laoder: Call Exit() on return from payload in StartImage()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] vsprintf.c: correct printing of a NULL device path
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do not install NULL as device path
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: consistently use %pD to print device paths
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: split README.efi into two separate documents
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support
Heinrich Schuchardt
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Heinrich Schuchardt
- [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch
Heinrich Schuchardt
- [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3
Heinrich Schuchardt
- [U-Boot] [PATCH v3 0/4] dm: video: Correct color ANSI escape sequence support
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/4] dm: video: show correct colors in graphical console
Heinrich Schuchardt
- [U-Boot] [PATCH v3 2/4] dm: video: correctly clean background in 16bit mode
Heinrich Schuchardt
- [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors
Heinrich Schuchardt
- [U-Boot] [PATCH v3 4/4] dm: video: support increased intensity (bold)
Heinrich Schuchardt
- [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: remove deprecated ConsoleControlProtocol
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix the online help for bootefi bootmgr
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/2] efi_loader: update README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/2] efi_loader: split README.efi into two separate documents
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_smbios_register should have a return value
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use constants in efi_allocate_pages()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_smbios_register should have a return value
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] rockchip: gpio: remove dead code
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Avoid NULL dereference
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] atcspi200: avoid possible NULL dereference
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] dm: video: tegra124: incorrect logical condition
Heinrich Schuchardt
- [U-Boot] [U-Boot, v2, 10/15] dm: mmc: sunxi: Add support for driver model
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix building crt0 on arm
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: simplify calling efi_init_obj_list
Heinrich Schuchardt
- [U-Boot] [PATCH 00/11] Introduce variables whitelisting in environment
Quentin Schulz
- [U-Boot] [PATCH 03/11] env: add support for whitelisting variables from secondary environments
Quentin Schulz
- [U-Boot] [PATCH] cmd: nvedit: add whitelist option for env import
Quentin Schulz
- [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function
Daniel Schwierzeck
- [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit
Daniel Schwierzeck
- [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Daniel Schwierzeck
- [U-Boot] [PATCH v7 03/13] wait_bit: remove old wait_for_bit function
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6368 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Comtrend WAP-5813n board
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family
Daniel Schwierzeck
- [U-Boot] [PATCH v2 4/4] MIPS: add BMIPS Comtrend AR-5315u board
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: bmips: increment SYS_MALLOC_F_LEN
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
Daniel Schwierzeck
- [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-spi/master
Daniel Schwierzeck
- [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()
Daniel Schwierzeck
- [U-Boot] [PATCH 0/4] Add support for treating compiler warnings as errors
Daniel Schwierzeck
- [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler
Daniel Schwierzeck
- [U-Boot] [PATCH 2/4] buildman: add option -E for treating compiler warnings as errors
Daniel Schwierzeck
- [U-Boot] [PATCH 3/4] travis.yml: fix 'set +e' in build script
Daniel Schwierzeck
- [U-Boot] [PATCH 4/4] travis.yml: run buildman with option -E
Daniel Schwierzeck
- [U-Boot] [PATCH] usb: ehci: mxs: fix swapped argument in ehci_writel()
Daniel Schwierzeck
- [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support
Daniel Schwierzeck
- [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/4] Add support for treating compiler warnings as errors
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/4] README: add doc for how to supply user specific compiler flags to Kbuild
Daniel Schwierzeck
- [U-Boot] [PATCH v2 2/4] buildman: add option -E for treating compiler warnings as errors
Daniel Schwierzeck
- [U-Boot] [PATCH v2 3/4] travis.yml: fix 'set +e' in build script
Daniel Schwierzeck
- [U-Boot] [PATCH v2 4/4] travis.yml: run buildman with option -E
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] MIPS: add BMIPS Netgear DGND3700v2 board
Daniel Schwierzeck
- [U-Boot] MIPS relocation DT error
Daniel Schwierzeck
- [U-Boot] standalone example on mips/ath79/QCA9558/Tp-Link Archer-c7
Daniel Schwierzeck
- [U-Boot] [PATCH v1] x86: tangier: Use actual GPIO hardware numbers
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table
Andy Shevchenko
- [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning
Andy Shevchenko
- [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters
Andy Shevchenko
- [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()
Andy Shevchenko
- [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment
Baruch Siach
- [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx
Gustavo A. R. Silva
- [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx
Gustavo A. R. Silva
- [U-Boot] U-Boot Operation on Xilinx Zynq SoC with Micro C
Nelson Silva
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Michal Simek
- [U-Boot] [RFC PATCH] ubifs: Remove functions which call functions which are not present
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option
Michal Simek
- [U-Boot] [PATCH] ARM: zynq: remove unused CONFIG_ZC770_XM01* options
Michal Simek
- [U-Boot] [PATCH] armv8: zynqmp: Map PCIe High as device memory
Michal Simek
- [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards
Michal Simek
- [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011
Michal Simek
- [U-Boot] [PATCH 3/8] arm: zynq: Disable networking for zc770 xm011
Michal Simek
- [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed
Michal Simek
- [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled
Michal Simek
- [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed
Michal Simek
- [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig
Michal Simek
- [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Fix pmu register description coding style
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: zynqmp: Remove whitespaces in psu_init() comment
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Propagate error value from psu_init()
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: zynqmp: Prepare psu_init rework
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Add psu_init for zcu102-rev1.0
Michal Simek
- [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Enable Cortex-A53 Erratum 855873
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Fix types in ps7_spl_init
Michal Simek
- [U-Boot] [PATCH 1/5] arm: zynq: Add zc770-xm010 spl configuration
Michal Simek
- [U-Boot] [PATCH 2/5] arm: zynq: Add zc770-xm011 spl configuration
Michal Simek
- [U-Boot] [PATCH 3/5] arm: zynq: Add zc770-xm012 spl configuration
Michal Simek
- [U-Boot] [PATCH 4/5] arm: zynq: Add zc770-xm013 spl configuration
Michal Simek
- [U-Boot] [PATCH 5/5] arm: zynq: Add support for zc770-xm011-x16 configuration
Michal Simek
- [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Enable SPL_CLK only if SPL is enabled
Michal Simek
- [U-Boot] [PATCH] doc: Update the zynq u-boot status
Michal Simek
- [U-Boot] [PATCH] doc: zynq: Describe status of zc770-xm011
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Provide a config to not map DDR region in MMU table
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Remove unused empty functions
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: zynqmp: Prepare psu_init rework
Michal Simek
- [U-Boot] [PATCH 1/3] xilinx: zynqmp: Add new target with only qspi enabled
Michal Simek
- [U-Boot] [PATCH 2/3] xilinx: zynqmp: Add new target with only nand enabled
Michal Simek
- [U-Boot] [PATCH 3/3] xilinx: zynqmp: Add new target with only emmc enabled
Michal Simek
- [U-Boot] [PATCH 1/3] nand: arasan_nfc: Move common ecc struct initialization init routine
Michal Simek
- [U-Boot] [PATCH] nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT
Michal Simek
- [U-Boot] [PATCH 1/2] zynq: board: Remove checkboard()
Michal Simek
- [U-Boot] [PATCH 2/2] zynq: Support CPU info display
Michal Simek
- [U-Boot] [PATCH v2 1/3] arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED
Michal Simek
- [U-Boot] [PATCH v2 2/3] arm64: zynqmp: Prepare psu_init rework
Michal Simek
- [U-Boot] [PATCH v2 3/3] arm64: zynqmp: Add psu_init for zcu102-rev1.0
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Update years in copyright to reflect latest changes
Michal Simek
- [U-Boot] [PATCH 2/2] zynq: Support CPU info display
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Mark cc108 uart to be initialized before relocation
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Enable gem on zc1751-dc5
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Add identification string to ep108
Michal Simek
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Michal Simek
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Michal Simek
- [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Remove ethernet alias for topic-miami
Michal Simek
- [U-Boot] [PATCH 1/3] arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig
Michal Simek
- [U-Boot] [PATCH 2/3] microblaze: Moved ethernet PHY configs of Microblaze board to defconfig
Michal Simek
- [U-Boot] [PATCH 3/3] arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig
Michal Simek
- [U-Boot] [PATCH 3/5] zynq: Support CPU info display
Michal Simek
- [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default
Michal Simek
- [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Enable ethernet driver for zc1751-dc5
Michal Simek
- [U-Boot] [GIT PULL] Xilinx patches for v2018.03
Michal Simek
- [U-Boot] [PATCH] arm: zynq: Enable debug uart on Zedboard
Michal Simek
- [U-Boot] [PATCH] Kconfig: Use imply for network commands in distro default
Michal Simek
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Goldschmidt Simon
- [U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Goldschmidt Simon
- [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned
Goldschmidt Simon
- [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep
Goldschmidt Simon
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Goldschmidt Simon
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Goldschmidt Simon
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Goldschmidt Simon
- [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode
Goldschmidt Simon
- [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode
Goldschmidt Simon
- [U-Boot] [RESEND PATCH] ddr: altera: silence PHY calibration unless in debug mode
Goldschmidt Simon
- [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32
Goldschmidt Simon
- [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
Mario Six
- [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis
Mario Six
- [U-Boot] [RESEND PATCH v2 02/27] cfi_flash: Fix style of pointer declarations
Mario Six
- [U-Boot] [RESEND PATCH v2 03/27] cfi_flash: Fix Parenthesis spacing
Mario Six
- [U-Boot] [RESEND PATCH v2 04/27] cfi_flash: Fix whitespace with casting
Mario Six
- [U-Boot] [RESEND PATCH v2 05/27] cfi_flash: Fix indent of case statements
Mario Six
- [U-Boot] [RESEND PATCH v2 06/27] cfi_flash: Fix spacing around casts/operators
Mario Six
- [U-Boot] [RESEND PATCH v2 07/27] cfi_flash: Fix missing/superfluous lines
Mario Six
- [U-Boot] [RESEND PATCH v2 08/27] cfi_flash: Remove braces for single-statement blocks
Mario Six
- [U-Boot] [RESEND PATCH v2 09/27] cfi_flash: Fix logical continuations
Mario Six
- [U-Boot] [RESEND PATCH v2 10/27] cfi_flash: Use __func__ macro instead of function name
Mario Six
- [U-Boot] [RESEND PATCH v2 11/27] cfi_flash: Fix comment style
Mario Six
- [U-Boot] [RESEND PATCH v2 12/27] cfi_flash: Remove unnecessary braces
Mario Six
- [U-Boot] [RESEND PATCH v2 13/27] cfi_flash: Add missing braces in blocks
Mario Six
- [U-Boot] [RESEND PATCH v2 14/27] cfi_flash: Fix spelling of "Unknown"
Mario Six
- [U-Boot] [RESEND PATCH v2 15/27] cfi_flash: Fix else after break
Mario Six
- [U-Boot] [RESEND PATCH v2 16/27] cfi_flash: Fix placement of brace
Mario Six
- [U-Boot] [RESEND PATCH v2 17/27] cfi_flash: Remove return from void function
Mario Six
- [U-Boot] [RESEND PATCH v2 18/27] cfi_flash: Remove assignments from if conditions
Mario Six
- [U-Boot] [RESEND PATCH v2 19/27] cfi_flash: Use u8 pointers instead of void pointers
Mario Six
- [U-Boot] [RESEND PATCH v2 20/27] cfi_flash: Fix strings split across lines
Mario Six
- [U-Boot] [RESEND PATCH v2 21/27] cfi_flash: Rename camel-case variables
Mario Six
- [U-Boot] [RESEND PATCH v2 22/27] flash: Fix spelling of "ERR_TIMOUT"
Mario Six
- [U-Boot] [RESEND PATCH v2 23/27] cfi_flash: Bound-check index before array access
Mario Six
- [U-Boot] [RESEND PATCH v2 24/27] cfi_flash: Fix long lines
Mario Six
- [U-Boot] [RESEND PATCH v2 25/27] cfi_flash: Fix indention
Mario Six
- [U-Boot] [RESEND PATCH v2 26/27] cfi_flash: Always define cfi_flash_num_flash_banks
Mario Six
- [U-Boot] [RESEND PATCH v2 27/27] mtd: cfi_flash: Make live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 1/4] clk: clk-uclass: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation
Mario Six
- [U-Boot] [RESEND PATCH v2 3/4] clk: Remove superfluous gd declarations
Mario Six
- [U-Boot] [RESEND PATCH v2 4/4] clk: Makefile: Sort entries alphabetically
Mario Six
- [U-Boot] [RESEND PATCH v2 1/4] core: ofnode: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/4] core: read: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 3/4] core: Add {ofnode, dev}_translate_address functions
Mario Six
- [U-Boot] [RESEND PATCH v2 4/4] core: Make device_is_compatible live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 1/2] lib: fdtdec: Fix whitespace style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/2] lib: fdtdec: Fix some style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 1/7] gpio: pca953x_gpio: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/7] gpio: pca953x_gpio: Make live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 3/7] gpio: mpc85xx_gpio: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 4/7] gpio: mpc85xx: Rename driver file to mpc8xxx
Mario Six
- [U-Boot] [RESEND PATCH v2 5/7] gpio: mpc8xxx: Rename Kconfig option, structures, and functions
Mario Six
- [U-Boot] [RESEND PATCH v2 6/7] gpio: mpc8xxx: Make compatible with more SoCs
Mario Six
- [U-Boot] [RESEND PATCH v2 7/7] gpio: mpc8xxx: Make live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 1/6] i2c: fsl_i2c: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/6] i2c: fsl_i2c: Remove inline declarations
Mario Six
- [U-Boot] [RESEND PATCH v2 3/6] i2c: fsl_i2c: Make live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 4/6] i2c: ihs_i2c: Prepare DM conversion
Mario Six
- [U-Boot] [RESEND PATCH v2 5/6] i2c: ihs_i2c: Make DM compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 6/6] i2c: ihs_i2c: Factor out send_buffer method
Mario Six
- [U-Boot] [RESEND PATCH v2 1/7] net: tsec: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/7] net: tsec: Fix memory leak in error path
Mario Six
- [U-Boot] [RESEND PATCH v2 3/7] net: tsec: Make live-tree compatible
Mario Six
- [U-Boot] [RESEND PATCH v2 4/7] net: phy: marvell: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 5/7] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type
Mario Six
- [U-Boot] [RESEND PATCH v2 6/7] cmd: mdio: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 7/7] phy: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 1/8] spi: Fix style violation and improve code
Mario Six
- [U-Boot] [RESEND PATCH v2 2/8] spi: Remove obsolete spi_base_setup_slave_fdt
Mario Six
- [U-Boot] [RESEND PATCH v2 3/8] spi: Remove spi_flash_probe_fdt
Mario Six
- [U-Boot] [RESEND PATCH v2 4/8] spi: Remove spi_setup_slave_fdt
Mario Six
- [U-Boot] [RESEND PATCH v2 5/8] spi: Remove CONFIG_OF_SPI_FLASH
Mario Six
- [U-Boot] [RESEND PATCH v2 6/8] spi: sf_probe: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 7/8] spi: spi-uclass: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 8/8] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe
Mario Six
- [U-Boot] [RESEND PATCH v2 1/4] include: dm: Fix 'devioe'/'devuce' typos
Mario Six
- [U-Boot] [RESEND PATCH v2 2/4] serial: ns16550: Fix style violation
Mario Six
- [U-Boot] [RESEND PATCH v2 3/4] common: board_f: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 4/4] common: board_r: Fix style violations
Mario Six
- [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation
Mario Six
- [U-Boot] [PATCH] powerpc: Drop unreferenced CONFIG_* defines
Mario Six
- [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox
Mario Six
- [U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox
Mario Six
- [U-Boot] [PATCH v3 01/26] cfi_flash: Fix space between function name and parenthesis
Mario Six
- [U-Boot] [PATCH v3 02/26] cfi_flash: Fix style of pointer declarations
Mario Six
- [U-Boot] [PATCH v3 03/26] cfi_flash: Fix Parenthesis spacing
Mario Six
- [U-Boot] [PATCH v3 04/26] cfi_flash: Fix whitespace with casting
Mario Six
- [U-Boot] [PATCH v3 05/26] cfi_flash: Fix indent of case statements
Mario Six
- [U-Boot] [PATCH v3 06/26] cfi_flash: Fix spacing around casts/operators
Mario Six
- [U-Boot] [PATCH v3 07/26] cfi_flash: Fix missing/superfluous lines
Mario Six
- [U-Boot] [PATCH v3 08/26] cfi_flash: Remove braces for single-statement blocks
Mario Six
- [U-Boot] [PATCH v3 09/26] cfi_flash: Fix logical continuations
Mario Six
- [U-Boot] [PATCH v3 10/26] cfi_flash: Use __func__ macro instead of function name
Mario Six
- [U-Boot] [PATCH v3 11/26] cfi_flash: Fix comment style
Mario Six
- [U-Boot] [PATCH v3 12/26] cfi_flash: Remove unnecessary braces
Mario Six
- [U-Boot] [PATCH v3 13/26] cfi_flash: Add missing braces in blocks
Mario Six
- [U-Boot] [PATCH v3 14/26] cfi_flash: Fix spelling of "Unknown"
Mario Six
- [U-Boot] [PATCH v3 15/26] cfi_flash: Fix else after break
Mario Six
- [U-Boot] [PATCH v3 16/26] cfi_flash: Fix placement of brace
Mario Six
- [U-Boot] [PATCH v3 17/26] cfi_flash: Remove return from void function
Mario Six
- [U-Boot] [PATCH v3 18/26] cfi_flash: Remove assignments from if conditions
Mario Six
- [U-Boot] [PATCH v3 19/26] cfi_flash: Use u8 pointers instead of void pointers
Mario Six
- [U-Boot] [PATCH v3 20/26] cfi_flash: Fix strings split across lines
Mario Six
- [U-Boot] [PATCH v3 21/26] cfi_flash: Rename camel-case variables
Mario Six
- [U-Boot] [PATCH v3 22/26] flash: Fix spelling of "ERR_TIMOUT"
Mario Six
- [U-Boot] [PATCH v3 23/26] cfi_flash: Bound-check index before array access
Mario Six
- [U-Boot] [PATCH v3 24/26] cfi_flash: Fix long lines
Mario Six
- [U-Boot] [PATCH v3 25/26] cfi_flash: Fix indention
Mario Six
- [U-Boot] [PATCH v3 26/26] cfi_flash: Always define cfi_flash_num_flash_banks
Mario Six
- [U-Boot] How to build standalone app *outside* u-boot build tree
Brett Stahlman
- [U-Boot] [Patch] for drivers/net/phy/smsc.c to support SMSC LAN8741
Arno Steffens
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
York Sun
- [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL
York Sun
- [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
York Sun
- [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation
York Sun
- [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction
York Sun
- [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction
York Sun
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
York Sun
- [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
York Sun
- [U-Boot] [PATCH] freescale: vid: add support LTC3882 and rework of the VID support
York Sun
- [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
York Sun
- [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
York Sun
- [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support
York Sun
- [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support
York Sun
- [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
York Sun
- [U-Boot] [PATCH 1/1] ls1012a:dts: Update LS1012A-2G5RDB device tree
York Sun
- [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
York Sun
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
York Sun
- [U-Boot] [PATCH] armv8: ls1088 : MC alignment should always be fixed to 512MB
York Sun
- [U-Boot] [PATCH v2] armv8: layerscape: sata: refine port register configuration
York Sun
- [U-Boot] [PATCH v5 1/2] drivers/misc: Share qbman init between archs
York Sun
- [U-Boot] [PATCH v5 2/2] Move SYS_DPAA_QBMAN to Kconfig
York Sun
- [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873
York Sun
- [U-Boot] [PATCH] Powerpc: T208xQDS: Modify the comment of the CONFIG_FSL_PCIE_RESET macro
York Sun
- [U-Boot] [PATCH v2 1/3] armv8: fsl-layerscape: SPL size reduction
York Sun
- [U-Boot] [PATCH v2 2/3] armv8: ls1088a: SPL size reduction
York Sun
- [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support
York Sun
- [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873
York Sun
- [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables
York Sun
- [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables
York Sun
- [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
York Sun
- [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3
York Sun
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
York Sun
- [U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure
York Sun
- [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR
York Sun
- [U-Boot] [PATCH v1] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] Individual files dual licenses
York Sun
- [U-Boot] Individual files dual licenses
York Sun
- [U-Boot] Individual files dual licenses
York Sun
- [U-Boot] Individual files dual licenses
York Sun
- [U-Boot] LS1046ARDB QSPI ENV fails
York Sun
- [U-Boot] Individual files dual licenses
York Sun
- [U-Boot] [PATCH v2 1/2] armv8/kconfig: Align boards of same family at one place
York Sun
- [U-Boot] [PATCH v2 2/2] board: ls1012a: LS1012A-2G5RDB board support
York Sun
- [U-Boot] [PATCH] serial: lpuart: Proper device identification
York Sun
- [U-Boot] [PATCH v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT
York Sun
- [U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
York Sun
- [U-Boot] [PATCH] board/ls2081ardb: Update board related prints
York Sun
- [U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard
York Sun
- [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL
York Sun
- [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL
York Sun
- [U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary
York Sun
- [U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support
York Sun
- [U-Boot] [PATCH 2/2] arm64: ls1012a: Add sata distro boot support
York Sun
- [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
York Sun
- [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR
York Sun
- [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR
York Sun
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v3 1/3] drivers/ddr/fsl: Fix DDR4 RDIMM support
York Sun
- [U-Boot] [PATCH v3 2/3] drivers/ddr/fsl: Fix workaround for A009803
York Sun
- [U-Boot] [PATCH v3 3/3] armv8: ls1046ardb: Add RDIMM support
York Sun
- [U-Boot] [PATCH v8 01/11] armv8: lsch3: Add serdes and DDR voltage setup
York Sun
- [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
York Sun
- [U-Boot] [PATCH] crypto/fsl: Fix HW accelerated hash commands
York Sun
- [U-Boot] [PATCH 1/2] fsl: common :qixis: Add ifc and emmc switching via qixis
York Sun
- [U-Boot] [PATCH 2/2] armv8: ls1088: Add ifc, emmc lbmap and rcw_src entry for ls1088
York Sun
- [U-Boot] [PATCH v4 1/8] drivers/ddr/fsl: Fix DDR4 RDIMM support
York Sun
- [U-Boot] [PATCH v4 2/8] drivers/ddr/fsl: Fix workaround for A009803
York Sun
- [U-Boot] [PATCH v4 3/8] drivers/ddr/fsl: Add 3DS RDIMM support
York Sun
- [U-Boot] [PATCH v4 4/8] drivers/ddr/fsl: Add calculation of register control words
York Sun
- [U-Boot] [PATCH v4 5/8] drivers/ddr/fsl: Modify binding registers to save time on data init
York Sun
- [U-Boot] [PATCH v4 6/8] drivers/ddr/fsl: Cleanup unused variable
York Sun
- [U-Boot] [PATCH v4 7/8] armv8: ls1046ardb: Add RDIMM support
York Sun
- [U-Boot] [PATCH v4 8/8] armv8: ls2088ardb: Add 3DS RDIMM support
York Sun
- [U-Boot] [PATCH v5 4/8] drivers/ddr/fsl: Add calculation of register control words
York Sun
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
York Sun
- [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support
York Sun
- [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
York Sun
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
York Sun
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
York Sun
- [U-Boot] [PATCH v3 09/15] env: Support multiple environments
York Sun
- [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support
Yuantian Tang
- [U-Boot] [PATCH 2/2] arm64: ls1012a: Add sata distro boot support
Yuantian Tang
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Jagan Teki
- [U-Boot] [PATCH 0/3][v2] sf: Update spi-nor framework
Jagan Teki
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Jagan Teki
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Jagan Teki
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Jagan Teki
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jagan Teki
- [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes
Jagan Teki
- [U-Boot] [RFC 0/5] sf: Update spi-nor framework
Jagan Teki
- [U-Boot] [PATCH 1/3] board: engicam: Fix to remove legacy board/icorem6_rqs
Jagan Teki
- [U-Boot] [PATCH 2/3] arm: i.MX6: nand boot device slection
Jagan Teki
- [U-Boot] [PATCH 3/3] mtd: nand: mxs_nand_spl: Remove nand size print
Jagan Teki
- [U-Boot] [PATCH 2/3] arm: i.MX6: fix nand boot device slection
Jagan Teki
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Jagan Teki
- [U-Boot] [PATCH 1/6] sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3
Jagan Teki
- [U-Boot] [PATCH 2/6] sunxi: musb: Add fifo config for H3
Jagan Teki
- [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes
Jagan Teki
- [U-Boot] FIT nand boot fail to load U-Boot proper
Jagan Teki
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Jagan Teki
- [U-Boot] [PATCH] board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit
Jagan Teki
- [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function
Jagan Teki
- [U-Boot] [PATCH v6 04/11] dm: spi: add BCM63xx SPI driver
Jagan Teki
- [U-Boot] [PATCH v6 05/11] mips: bmips: add bcm63xx-spi driver support for BCM6338
Jagan Teki
- [U-Boot] [PATCH v6 06/11] mips: bmips: add bcm63xx-spi driver support for BCM6348
Jagan Teki
- [U-Boot] [PATCH v6 07/11] mips: bmips: add bcm63xx-spi driver support for BCM6358
Jagan Teki
- [U-Boot] [PATCH v6 08/11] mips: bmips: add bcm63xx-spi driver support for BCM3380
Jagan Teki
- [U-Boot] [PATCH v6 09/11] mips: bmips: add bcm63xx-spi driver support for BCM63268
Jagan Teki
- [U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Jagan Teki
- [U-Boot] [PATCH v6 11/11] mips: bmips: enable the SPI flash on the Netgear CG3100D
Jagan Teki
- [U-Boot] [PATCH 1/3] configs: enable spl support wrt env device
Jagan Teki
- [U-Boot] [PATCH 2/3] configs: icore: enable nand on mmc defconfig
Jagan Teki
- [U-Boot] [PATCH 3/3] i.MX: nand: add nandbcb update command
Jagan Teki
- [U-Boot] [PATCH] sunxi: maintainers: Add myself for the TBS A711
Jagan Teki
- [U-Boot] [PATCH] ARM: sunxi: Remove left-over cd-inverted property from pcDuino3
Jagan Teki
- [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree
Jagan Teki
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 02/11] cmd: unzip: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 03/11] cmd: loadb: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 04/11] cmd: loads: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 05/11] cmd: misc: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 06/11] video: bpp8: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 07/11] video: bpp16: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 08/11] net: regex: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH 09/11] sunxi: imply CONFIG_OF_LIBFDT_OVERLAY
Jagan Teki
- [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig
Jagan Teki
- [U-Boot] [PATCH] doc: bindings: soft-spi: update documentation to match the code
Jagan Teki
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Jagan Teki
- [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit
Jagan Teki
- [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit
Jagan Teki
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi
Jagan Teki
- [U-Boot] [PATCH v9 00/12] mips: bmips: add SPI support
Jagan Teki
- [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Jagan Teki
- [U-Boot] [RESEND PATCH v2 1/8] spi: Fix style violation and improve code
Jagan Teki
- [U-Boot] [RESEND PATCH v2 2/8] spi: Remove obsolete spi_base_setup_slave_fdt
Jagan Teki
- [U-Boot] [RESEND PATCH v2 8/8] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe
Jagan Teki
- [U-Boot] [PATCH v2] spi: kirkwood_spi: implement workaround for FE-9144572
Jagan Teki
- [U-Boot] [PATCH] sunxi: Fix display timing flags
Jagan Teki
- [U-Boot] [PATCH v3 1/2] arm: sunxi: Allwinner A10 SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Jagan Teki
- [U-Boot] [PATCH v4] spi: kirkwood_spi: implement workaround for FE-9144572
Jagan Teki
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jagan Teki
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jagan Teki
- [U-Boot] [PATCH v5 1/5] spi: cadence_spi: Sync DT bindings with Linux
Jagan Teki
- [U-Boot] [PATCH v5 3/5] config: cadence_spi: Remove defines read from DT
Jagan Teki
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jagan Teki
- [U-Boot] [PATCH v5 4/5] dts: k2g: Clean-up indentation
Jagan Teki
- [U-Boot] [PATCH v5 5/5] dts: cadence_spi: Update documentation for DT bindings
Jagan Teki
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jagan Teki
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jagan Teki
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Jagan Teki
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jagan Teki
- [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux
Jagan Teki
- [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver
Jagan Teki
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Jagan Teki
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes
Jagan Teki
- [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO
Jagan Teki
- [U-Boot] [[PATCH v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT
Jagan Teki
- [U-Boot] [[PATCH v2] 2/8] sunxi: musb: Add fifo config for H3
Jagan Teki
- [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree
Jagan Teki
- [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings
Jagan Teki
- [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree
Jagan Teki
- [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings
Jagan Teki
- [U-Boot] [PATCH v3 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Jagan Teki
- [U-Boot] [PATCH v10 00/12] mips: bmips: add SPI support
Jagan Teki
- [U-Boot] Pull request v2: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [[PATCH v2] 5/8] sunxi: musb: Enable OTG device clock for H3
Jagan Teki
- [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing
Jagan Teki
- [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing
Jagan Teki
- [U-Boot] [PATCH v3 00/30] musb: sunxi: Add OTG-Peripheral support for Allwineer H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 01/30] sunxi: h3: Sync OTG and HCI nodes from Linux DT
Jagan Teki
- [U-Boot] [PATCH v3 02/30] sunxi: musb: Add fifo config for H3
Jagan Teki
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 04/30] sunxi: musb: Hack dynamic fifo support for H3 OTG
Jagan Teki
- [U-Boot] [PATCH v3 05/30] sunxi: musb: Enable OTG device clock for H3
Jagan Teki
- [U-Boot] [PATCH v3 06/30] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 07/30] sunxi: H3: set different otg base address per mode
Jagan Teki
- [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing
Jagan Teki
- [U-Boot] [PATCH v3 09/30] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v3 10/30] configs: bananapi-m2-plus: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v3 11/30] configs: sun50i: Drop CONFIG_USB_MAX_CONTROLLER_COUNT
Jagan Teki
- [U-Boot] [PATCH v3 12/30] msub: sunxi: Update proper fifo config for H5
Jagan Teki
- [U-Boot] [PATCH v3 13/30] configs: sun50i: Set proper USB PHY count for H5
Jagan Teki
- [U-Boot] [PATCH v3 14/30] sunxi: usb_phy: Fix phy_config to handle all SOC's
Jagan Teki
- [U-Boot] [PATCH v3 15/30] musb: sunxi: Add phy0 dual route support
Jagan Teki
- [U-Boot] [PATCH v3 16/30] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
Jagan Teki
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Jagan Teki
- [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table
Jagan Teki
- [U-Boot] [PATCH v3 19/30] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v3 20/30] configs: orangepi-pc2: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v3 21/30] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
Jagan Teki
- [U-Boot] [PATCH v3 22/30] configs: orangepi-prime: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v3 23/30] sunxi: clock: Fix clock gating for A64
Jagan Teki
- [U-Boot] [PATCH v3 24/30] configs: sun50i: Set proper USB PHY count for A64
Jagan Teki
- [U-Boot] [PATCH v3 25/30] musb: sunxi: Add support for A64
Jagan Teki
- [U-Boot] [PATCH v3 26/30] sunxi: usb_phy: Clear SIDDP for A64
Jagan Teki
- [U-Boot] [PATCH v3 27/30] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
Jagan Teki
- [U-Boot] [PATCH v3 28/30] configs: bananapi-m64: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v3 29/30] arm64: allwinner: a64: olinuxino: Sync usb_otg from Linux
Jagan Teki
- [U-Boot] [PATCH v3 30/30] configs: a64-olinuxino: Enable USB OTG peripheral mode
Jagan Teki
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing
Jagan Teki
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Jagan Teki
- [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table
Jagan Teki
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Jagan Teki
- [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment
Jagan Teki
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Benoît Thébaudeau
- [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Benoît Thébaudeau
- [U-Boot] [PATCH v2] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Benoît Thébaudeau
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Benoît Thébaudeau
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Benoît Thébaudeau
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Benoît Thébaudeau
- [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core
Joakim Tjernlund
- [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09
Joakim Tjernlund
- [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux
Amit Tomer
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Dr. Philipp Tomsich
- [U-Boot] "Reset" values for clksel_con registers in clk_rk3399.c:rkclk_init()
Dr. Philipp Tomsich
- [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull from u-boot-rockchip/master
Dr. Philipp Tomsich
- [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver
Dr. Philipp Tomsich
- [U-Boot] [PATCH 3/3] rockchip: updata the style of reporting sdram cap
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/3] rockchip: Add RV1108 SPL support
Dr. Philipp Tomsich
- [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation
Dr. Philipp Tomsich
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Dr. Philipp Tomsich
- [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Dr. Philipp Tomsich
- [U-Boot] [PATCH] spl: use different BOARD_INIT MACRO for spl and tpl
Dr. Philipp Tomsich
- [U-Boot] [PATCH] spl: add option to disable SPL banner output
Dr. Philipp Tomsich
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Dr. Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()
Dr. Philipp Tomsich
- [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()
Dr. Philipp Tomsich
- [U-Boot] [PATCH 1/1] rockchip: gpio: remove dead code
Dr. Philipp Tomsich
- [U-Boot] rockchip: rk3399-puma: reduce env size to 8kiB
Philipp Tomsich
- [U-Boot] rockchp: dts: rk3399-evb: support boot from sd-card
Philipp Tomsich
- [U-Boot] [U-Boot, v5, 1/2] drivers/reset: support rockchip reset drivers
Philipp Tomsich
- [U-Boot] [U-Boot,v5,2/2] rockchip: clk: bind reset driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 01/11] lib: add TPL_OF_LIBFDT option for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 02/11] arm: add option for TPL ARCH_MEM in arm 32bit
Philipp Tomsich
- [U-Boot] [U-Boot,v3,03/11] arm: add a separate stack for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/11] sysreset: enable driver support in SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot,v3,06/11] image: add os type for OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/11] rockchip: add fit source file for pack itb with op-tee
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/11] rockchip: evb-rk3229: add README file for OP-TEE support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 01/11] lib: add TPL_OF_LIBFDT option for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 02/11] arm: add option for TPL ARCH_MEM in arm 32bit
Philipp Tomsich
- [U-Boot] [U-Boot,v3,03/11] arm: add a separate stack for TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/11] sysreset: enable driver support in SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot,v3,06/11] image: add os type for OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/11] rockchip: add fit source file for pack itb with op-tee
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/11] rockchip: evb-rk3229: add README file for OP-TEE support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: board: lion-rk3368: reduce env-size default to 8KiB
Philipp Tomsich
- [U-Boot] [PATCH 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Philipp Tomsich
- [U-Boot] rockchip: board: lion-rk3368: reduce env-size default to 8KiB
Philipp Tomsich
- [U-Boot] [U-Boot, 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 04/11] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] spl: atf: pass NULL for bl32_ep pc
Philipp Tomsich
- [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device
Philipp Tomsich
- [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets
Philipp Tomsich
- [U-Boot] spl: atf: pass NULL for bl32_ep pc
Philipp Tomsich
- [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device
Philipp Tomsich
- [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 04/11] rockchip: rk322x: enable tpl support
Philipp Tomsich
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets
Philipp Tomsich
- [U-Boot] [PATCH 0/5] clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates
Philipp Tomsich
- [U-Boot] [PATCH 1/5] clk: add clk_set_parent()
Philipp Tomsich
- [U-Boot] [PATCH 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()
Philipp Tomsich
- [U-Boot] [PATCH 3/5] rockchip: clk: rk3399: implement set_parent() operation
Philipp Tomsich
- [U-Boot] [PATCH 4/5] clk: implement clk_set_defaults()
Philipp Tomsich
- [U-Boot] [PATCH 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node
Philipp Tomsich
- [U-Boot] [PATCH v2 0/5] clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates
Philipp Tomsich
- [U-Boot] [PATCH v2 1/5] clk: add clk_set_parent()
Philipp Tomsich
- [U-Boot] [PATCH v2 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()
Philipp Tomsich
- [U-Boot] [PATCH v2 3/5] rockchip: clk: rk3399: implement set_parent() operation
Philipp Tomsich
- [U-Boot] [PATCH v2 4/5] clk: implement clk_set_defaults()
Philipp Tomsich
- [U-Boot] [PATCH v2 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node
Philipp Tomsich
- [U-Boot] spl: atf: pass NULL for bl32_ep pc
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 01/20] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 02/20] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"
Philipp Tomsich
- [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0
Philipp Tomsich
- [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device
Philipp Tomsich
- [U-Boot] [U-Boot,v2,1/5] clk: add clk_set_parent()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 3/5] rockchip: clk: rk3399: implement set_parent() operation
Philipp Tomsich
- [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node
Philipp Tomsich
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Martin Townsend
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Martin Townsend
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Martin Townsend
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Martin Townsend
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Martin Townsend
- [U-Boot] [PATCH v2] ubi: Ensure no fastmap flush after uif_close
Martin Townsend
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Trimarchi
- [U-Boot] [PATCH V2] imx: mx25: Remove SION bit in all pin-mux that are safe
Michael Trimarchi
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Michael Trimarchi
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Michael Trimarchi
- [U-Boot] On writing .ext4 image to MMC
Michael Nazzareno Trimarchi
- [U-Boot] On writing .ext4 image to MMC
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz
Michael Nazzareno Trimarchi
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Michael Nazzareno Trimarchi
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Michael Nazzareno Trimarchi
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe
Michael Nazzareno Trimarchi
- [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()
Michael Nazzareno Trimarchi
- [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH] mx6sabresd: Add fastboot support
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Chen-Yu Tsai
- [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported
Chen-Yu Tsai
- [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree
Chen-Yu Tsai
- [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings
Chen-Yu Tsai
- [U-Boot] [PATCH 1/5] fs: Migrate ext4 to Kconfig
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/5] ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/5] env: ENV_IS_IN_FAT improvements
Tuomas Tynkkynen
- [U-Boot] [PATCH 4/5] fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description
Tuomas Tynkkynen
- [U-Boot] [PATCH 5/5] fs: fat: Drop CONFIG_SUPPORT_VFAT
Tuomas Tynkkynen
- [U-Boot] [PATCH 0/4] ARM: Extend qemu_arm to support ARM64
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/4] ARM: qemu-arm: Add support for AArch64
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm
Tuomas Tynkkynen
- [U-Boot] [PATCH 3/4] Travis-CI: Download ARM64 version of GRUB as well
Tuomas Tynkkynen
- [U-Boot] [PATCH 4/4] Travis-CI: Add job for running test.py on qemu_arm64
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm
Tuomas Tynkkynen
- [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 0/4] ARM: Extend qemu_arm to support ARM64
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 2/4] ARM: Document AArch64 version of qemu-arm
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 3/4] Travis-CI: Download ARM64 version of GRUB as well
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 4/4] Travis-CI: Add job for running test.py on qemu_arm64
Tuomas Tynkkynen
- [U-Boot] [PATCH] pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros
Tuomas Tynkkynen
- [U-Boot] [PATCH] nds32: Drop unreferenced CONFIG_ADP_AG101P
Tuomas Tynkkynen
- [U-Boot] [PATCH] m68k: Drop unreferenced CONFIG_* defines
Tuomas Tynkkynen
- [U-Boot] [PATCH] powerpc: Drop unreferenced CONFIG_* defines
Tuomas Tynkkynen
- [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64
Tuomas Tynkkynen
- [U-Boot] [PATCH] powerpc: Drop CONFIG_WALNUT and other related dead code
Tuomas Tynkkynen
- [U-Boot] [PATCH 1/2] fpga: Resync various CONFIG_FPGA_* symbols
Tuomas Tynkkynen
- [U-Boot] [PATCH 2/2] cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA
Tuomas Tynkkynen
- [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support
Bhaskar Upadhaya
- [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
Bhaskar Upadhaya
- [U-Boot] [PATCH v2 1/2] armv8/kconfig: Align boards of same family at one place
Bhaskar Upadhaya
- [U-Boot] [PATCH v2 2/2] board: ls1012a: LS1012A-2G5RDB board support
Bhaskar Upadhaya
- [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c
Emmanuel Vadot
- [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot
Emmanuel Vadot
- [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c
Emmanuel Vadot
- [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot
Emmanuel Vadot
- [U-Boot] api: bootelf: go: flush cache before starting
Emmanuel Vadot
- [U-Boot] [PATCH] drivers: pci: imx: fix enumeration logic error
Koen Vandeputte
- [U-Boot] exFAT support in u-boot
Arun Kuttiyara Varghese
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()
Marek Vasut
- [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Marek Vasut
- [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks
Marek Vasut
- [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1
Marek Vasut
- [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Marek Vasut
- [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences
Marek Vasut
- [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable HS200 mode on RCar Gen3
Marek Vasut
- [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()
Marek Vasut
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings
Marek Vasut
- [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree
Marek Vasut
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (09.01.2018)
Marek Vasut
- [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: allow configs without network support
Marek Vasut
- [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses
Marek Vasut
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Marek Vasut
- [U-Boot] [PATCH] clk: rmobile: Assure SD-IF clock are configured correctly
Marek Vasut
- [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()
Marek Vasut
- [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Marek Vasut
- [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks
Marek Vasut
- [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1
Marek Vasut
- [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Marek Vasut
- [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences
Marek Vasut
- [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable HS200 mode on RCar Gen3
Marek Vasut
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Marek Vasut
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Marek Vasut
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Marek Vasut
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Marek Vasut
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Marek Vasut
- [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)
Marek Vasut
- [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis
Marek Vasut
- [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx
Marek Vasut
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode
Marek Vasut
- [U-Boot] [PATCH 1/2] ARM: dts: rmobile: Update DTS to match Linux 4.14
Marek Vasut
- [U-Boot] [PATCH 2/2] ARM: dts: rmobile: Factor out U-Boot extras
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig
Marek Vasut
- [U-Boot] [PATCH 1/2] serial: sh: Replace fdtdec_get_addr() with devfdt_get_addr()
Marek Vasut
- [U-Boot] [PATCH 2/2] serial: sh: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2
Marek Vasut
- [U-Boot] [PATCH 01/13] clk: renesas: Split RCar Gen3 driver
Marek Vasut
- [U-Boot] [PATCH 02/13] clk: renesas: Make clk_ids per-driver
Marek Vasut
- [U-Boot] [PATCH 03/13] clk: renesas: Make PLL configurations per-SoC
Marek Vasut
- [U-Boot] [PATCH 04/13] clk: renesas: Pull Gen3 specific bits into separate header
Marek Vasut
- [U-Boot] [PATCH 05/13] clk: renesas: Split SMSTPCR and RMSTPCR tables
Marek Vasut
- [U-Boot] [PATCH 06/13] clk: renesas: Make clock tables Kconfig configurable
Marek Vasut
- [U-Boot] [PATCH 07/13] clk: renesas: Split out code shared between Gen2 and Gen3
Marek Vasut
- [U-Boot] [PATCH 08/13] clk: renesas: Add DIV6P1 clock type
Marek Vasut
- [U-Boot] [PATCH 09/13] clk: renesas: Add Gen2 clock core
Marek Vasut
- [U-Boot] [PATCH 10/13] clk: renesas: Import R8A7790 H2 clock tables
Marek Vasut
- [U-Boot] [PATCH 11/13] clk: renesas: Import R8A7791/R8A7793 M2 clock tables
Marek Vasut
- [U-Boot] [PATCH 12/13] clk: renesas: Import R8A7792 V2H clock tables
Marek Vasut
- [U-Boot] [PATCH 13/13] clk: renesas: Import R8A7794 E2 clock tables
Marek Vasut
- [U-Boot] [PATCH 1/4] pinctrl: rmobile: Import R8A7790 H2 PFC tables
Marek Vasut
- [U-Boot] [PATCH 2/4] pinctrl: rmobile: Import R8A7791/R8A7793 M2 PFC tables
Marek Vasut
- [U-Boot] [PATCH 3/4] pinctrl: rmobile: Import R8A7792 V2H PFC tables
Marek Vasut
- [U-Boot] [PATCH 4/4] pinctrl: rmobile: Import R8A7794 E2 PFC tables
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Marek Vasut
- [U-Boot] [PATCH] gpio: rmobile: Add RCar Gen2 compatible string
Marek Vasut
- [U-Boot] [PATCH] pci: rmobile: Add RCar Gen2 PCIe controller driver
Marek Vasut
- [U-Boot] [PATCH] net: ravb: staticize ravb_start
Marek Vasut
- [U-Boot] [PATCH 1/7] net: sh_eth: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2
Marek Vasut
- [U-Boot] [PATCH 2/7] net: sh_eth: Pass sh_eth_dev around
Marek Vasut
- [U-Boot] [PATCH 3/7] net: sh_eth: Split sh_eth_recv
Marek Vasut
- [U-Boot] [PATCH 4/7] net: sh_eth: Separate out MAC address programming
Marek Vasut
- [U-Boot] [PATCH 5/7] net: sh_eth: Split sh_eth_init
Marek Vasut
- [U-Boot] [PATCH 6/7] net: sh_eth: Clump legacy functions together
Marek Vasut
- [U-Boot] [PATCH 7/7] net: sh_eth: Add DM and DT support
Marek Vasut
- [U-Boot] [PATCH 1/7] ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8
Marek Vasut
- [U-Boot] [PATCH 2/7] ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8
Marek Vasut
- [U-Boot] [PATCH 3/7] ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8
Marek Vasut
- [U-Boot] [PATCH 4/7] ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8
Marek Vasut
- [U-Boot] [PATCH 5/7] ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8
Marek Vasut
- [U-Boot] [PATCH 6/7] ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT
Marek Vasut
- [U-Boot] [PATCH 7/7] ARM: dts: rmobile: Add SoC and board U-Boot DT extras
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable OF_CONTROL on RCar Gen2
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Convert R8A7791 Porter board to DM and DT
Marek Vasut
- [U-Boot] [RESEND PATCH] ddr: altera: silence PHY calibration unless in debug mode
Marek Vasut
- [U-Boot] [PATCH v2] arm: socfpga: allow configs without network support
Marek Vasut
- [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Marek Vasut
- [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device
Marek Vasut
- [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device
Marek Vasut
- [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/rmobile-mx
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Marek Vasut
- [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Marek Vasut
- [U-Boot] [PATCH] usb: Remove unused hcd_name variable
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets
Marek Vasut
- [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function
Marek Vasut
- [U-Boot] [PATCH] usb: Remove isp116x-hcd support
Marek Vasut
- [U-Boot] [PATCH] usb: host: Drop unused hcd_name from r8a66597-hcd.c
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Marek Vasut
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Marek Vasut
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Marek Vasut
- [U-Boot] [PATCH v3 02/30] sunxi: musb: Add fifo config for H3
Marek Vasut
- [U-Boot] [PATCH v3 05/30] sunxi: musb: Enable OTG device clock for H3
Marek Vasut
- [U-Boot] [PATCH v3 15/30] musb: sunxi: Add phy0 dual route support
Marek Vasut
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Marek Vasut
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Marek Vasut
- [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")
Marek Vasut
- [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")
Marek Vasut
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Marek Vasut
- [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64
Marek Vasut
- [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Marek Vasut
- [U-Boot] [PATCH v7 2/3] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
Marek Vasut
- [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH
Marek Vasut
- [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Marek Vasut
- [U-Boot] [PATCH 02/10] mmc: uniphier-sd: Use mmc_of_parse()
Marek Vasut
- [U-Boot] [PATCH V3 03/10] mmc: uniphier-sd: Add Renesas RCar quirks
Marek Vasut
- [U-Boot] [PATCH 04/10] mmc: uniphier-sd: Handle Renesas div-by-1
Marek Vasut
- [U-Boot] [PATCH 05/10] mmc: uniphier-sd: Handle DMA completion flag differences
Marek Vasut
- [U-Boot] [PATCH 06/10] mmc: uniphier-sd: Handle bus width 0
Marek Vasut
- [U-Boot] [PATCH 07/10] mmc: uniphier-sd: Always check controller version
Marek Vasut
- [U-Boot] [PATCH V3 08/10] mmc: uniphier-sd: Properly handle pin voltage configuration
Marek Vasut
- [U-Boot] [PATCH 09/10] mmc: uniphier-sd: Export registers and IO accessors
Marek Vasut
- [U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Marek Vasut
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Rasmus Villemoes
- [U-Boot] [RFC PATCH] Allow providing default environment from file
Rasmus Villemoes
- [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep
Lokesh Vutla
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Lokesh Vutla
- [U-Boot] [PATCH] arm: am33xx: security: Fix size calculation on header
Lokesh Vutla
- [U-Boot] [PATCH] configs: am57xx_evm: fix ethernet phy configuration
Lokesh Vutla
- [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED
Lokesh Vutla
- [U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes
Lokesh Vutla
- [U-Boot] [PATCH v2 00/13] arm: am57xx: Add support for am574-idk
Lokesh Vutla
- [U-Boot] [PATCH v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM
Lokesh Vutla
- [U-Boot] [PATCH] am33xx: board: Call spl_early_init() to support sdram_init()
Lokesh Vutla
- [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes
Lokesh Vutla
- [U-Boot] [PATCH] tools: remove unused ret
Jelle van der Waa
- [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL
Alison Wang
- [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER
Stephen Warren
- [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
Stephen Warren
- [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header
Stephen Warren
- [U-Boot] [PATCH V2 1/2] ARMv8: add optional Linux kernel image header
Stephen Warren
- [U-Boot] [PATCH V2 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER
Stephen Warren
- [U-Boot] [PATCH 1/3] ARM: Tegra186: mem parsing fixes from downstream
Stephen Warren
- [U-Boot] [PATCH 2/3] ARM: Tegra186: search for best RAM bank
Stephen Warren
- [U-Boot] [PATCH 3/3] ARM: tegra: p2771-000: increase max DRAM bank count
Stephen Warren
- [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL
Stephen Warren
- [U-Boot] [PATCH] ARM: Tegra186: don't map memory not in RAM banks
Stephen Warren
- [U-Boot] [PATCH] ARM: bootm: don't assume sp is in DRAM bank 0
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER
Stephen Warren
- [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: Tegra186: calculate load addresses at boot
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: Tegra: p2771-0000: use calculcate env var feature
Stephen Warren
- [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack
Stephen Warren
- [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer
Stephen Warren
- [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack
Stephen Warren
- [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack
Stephen Warren
- [U-Boot] Pull request, u-boot-tegra/master
Stephen Warren
- [U-Boot] u-boot-mmc fails on almost every Tegra board
Stephen Warren
- [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling
Stephen Warren
- [U-Boot] [PATCH] fdt: Fixup only valid memory banks
Stephen Warren
- [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL
Tom Warren
- [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL
Tom Warren
- [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack
Tom Warren
- [U-Boot] Pull request, u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH v6 0/2] Generic firmware loader
Lothar Waßmann
- [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system
Lothar Waßmann
- [U-Boot] [PATCH] fdt: Fixup only valid memory banks
Lothar Waßmann
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Richard Weinberger
- [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled
Richard Weinberger
- [U-Boot] [PATCH] ARM: omap3: evm: Do not relocate FDT address
Derald Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald Woods
- [U-Boot] [PATCH] ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4
Derald D. Woods
- [U-Boot] [PATCH 0/2] ARM: omap3: evm: Fix distro bootcmd
Derald D. Woods
- [U-Boot] [PATCH 1/2] distro bootcmd: Allow board defined UBI partition and volume names
Derald D. Woods
- [U-Boot] [PATCH 2/2] ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC support
Derald D. Woods
- [U-Boot] [PATCH v2] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig
Derald D. Woods
- [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails
Derald D. Woods
- [U-Boot] [PATCH] serial: Make full device search optional
Derald D. Woods
- [U-Boot] [PATCH v3 00/20] Add gmac support for rk3399-evb rv1108-evb rk3328-evb and rk3229-evb
David Wu
- [U-Boot] [PATCH v3 01/20] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality
David Wu
- [U-Boot] [PATCH v3 02/20] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb
David Wu
- [U-Boot] [PATCH v3 03/20] rockchip: grf_rv1108.h: Fix the grf offsets
David Wu
- [U-Boot] [PATCH v3 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver
David Wu
- [U-Boot] [PATCH v3 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC
David Wu
- [U-Boot] [PATCH v3 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver
David Wu
- [U-Boot] [PATCH v3 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support
David Wu
- [U-Boot] [PATCH v3 08/20] clk: rockchip: Add rk3328 gamc clock support
David Wu
- [U-Boot] [PATCH v3 09/20] net: gmac_rockchip: Add rk3328 gmac support
David Wu
- [U-Boot] [PATCH v3 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328
David Wu
- [U-Boot] [PATCH v3 11/20] rockchip: dts: rk3328: Add gmac2io support
David Wu
- [U-Boot] [PATCH v3 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb
David Wu
- [U-Boot] [PATCH v3 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver
David Wu
- [U-Boot] [PATCH v3 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support
David Wu
- [U-Boot] [PATCH v3 15/20] clk: rockchip: Add rk322x gamc clock support
David Wu
- [U-Boot] [PATCH v3 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC
David Wu
- [U-Boot] [PATCH v3 17/20] config: evb-rk3229: Enable rk gmac configs
David Wu
- [U-Boot] [PATCH v3 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned
David Wu
- [U-Boot] [PATCH v3 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"
David Wu
- [U-Boot] [PATCH v3 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"
David Wu
- [U-Boot] uboot img
Ivan Yakymenko
- [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options
Masahiro Yamada
- [U-Boot] [PATCH 0/3] ARM: uniphier: updates for v2017.03 MW
Masahiro Yamada
- [U-Boot] [PATCH 1/3] ARM: uniphier: do not use RAM that exceeds 32 bit address range
Masahiro Yamada
- [U-Boot] [PATCH 2/3] ARM: uniphier: enable CONFIG_MMC_SDHCI_SDMA for ARMv8 SoCs
Masahiro Yamada
- [U-Boot] [PATCH 3/3] ARM: uniphier: hide memory top by platform hook instead of CONFIG
Masahiro Yamada
- [U-Boot] [PATCH 1/2] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Masahiro Yamada
- [U-Boot] [PATCH 2/2] libfdt: fix <linux/libfdt.h>
Masahiro Yamada
- [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option
Masahiro Yamada
- [U-Boot] [PATCH 1/7] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Masahiro Yamada
- [U-Boot] [PATCH 2/7] libfdt: fix <linux/libfdt.h>
Masahiro Yamada
- [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly
Masahiro Yamada
- [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h
Masahiro Yamada
- [U-Boot] [PATCH 5/7] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h
Masahiro Yamada
- [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper
Masahiro Yamada
- [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper
Masahiro Yamada
- [U-Boot] [PATCH 0/3] ARM: uniphier: updates for v2017.03 MW
Masahiro Yamada
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH v3 0/6] assert() is almost used in the same way as BUG_ON(), except:
Masahiro Yamada
- [U-Boot] [PATCH v3 1/6] Enable CONFIG_PANIC_HANG for boards without do_reset()
Masahiro Yamada
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Masahiro Yamada
- [U-Boot] [PATCH v3 3/6] Introduce CONFIG_BUG_CHECKS to allow to disable BUG{_ON} and WARN_ON
Masahiro Yamada
- [U-Boot] [PATCH v3 4/6] ARM: openrd: disable CONFIG_BUG_CHECKS
Masahiro Yamada
- [U-Boot] [PATCH v3 5/6] treewide: convert assert() to BUG_ON()
Masahiro Yamada
- [U-Boot] [PATCH v3 6/6] Remove assert()
Masahiro Yamada
- [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions
Masahiro Yamada
- [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support
Masahiro Yamada
- [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support
Masahiro Yamada
- [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h
Masahiro Yamada
- [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper
Masahiro Yamada
- [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper
Masahiro Yamada
- [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support
Masahiro Yamada
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Masahiro Yamada
- [U-Boot] [PATCH v3 1/6] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c
Masahiro Yamada
- [U-Boot] [PATCH v3 2/6] libfdt: fix <linux/libfdt.h>
Masahiro Yamada
- [U-Boot] [PATCH v3 3/6] tools: include necessary headers explicitly
Masahiro Yamada
- [U-Boot] [PATCH v3 4/6] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h
Masahiro Yamada
- [U-Boot] [PATCH v3 5/6] libfdt: migrate libfdt.h to a wrapper + U-Boot own code
Masahiro Yamada
- [U-Boot] [PATCH v3 6/6] libfdt: migrate include/libfdt_env.h to a wrapper
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig
Masahiro Yamada
- [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()
Masahiro Yamada
- [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2
Masahiro Yamada
- [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration
Masahiro Yamada
- [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks
Masahiro Yamada
- [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1
Masahiro Yamada
- [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support
Masahiro Yamada
- [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences
Masahiro Yamada
- [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version
Masahiro Yamada
- [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler
Masahiro Yamada
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Masahiro Yamada
- [U-Boot] [GIT PULL] u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig
Masahiro Yamada
- [U-Boot] [PATCH] kconfig: revert change that was not needed for -Wformat-security
Masahiro Yamada
- [U-Boot] [PATCH] mmc: use pr_* log functions
Masahiro Yamada
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Masahiro Yamada
- [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()
Masahiro Yamada
- [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang
Masahiro Yamada
- [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries
Masahiro Yamada
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Masahiro Yamada
- [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set
Masahiro Yamada
- [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support
Andy Yan
- [U-Boot] [RFC PATCH 0/1] Add Rockchip SFC driver under mtd/spi-nor framework
Andy Yan
- [U-Boot] [RFC PATCH] mtd: spi-nor: add rockchip sfc driver
Andy Yan
- [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface
Andy Yan
- [U-Boot] [PATCH 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Kever Yang
- [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support
Kever Yang
- [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE
Kever Yang
- [U-Boot] [PATCH v4 00/11] rockchip: add tpl and OPTEE support for rk3229
Kever Yang
- [U-Boot] [PATCH v4 01/11] lib: add TPL_OF_LIBFDT option for TPL
Kever Yang
- [U-Boot] [PATCH v4 02/11] arm: add option for TPL ARCH_MEM in arm 32bit
Kever Yang
- [U-Boot] [PATCH v4 03/11] arm: add a separate stack for TPL
Kever Yang
- [U-Boot] [PATCH v4 04/11] rockchip: rk322x: enable tpl support
Kever Yang
- [U-Boot] [PATCH v4 05/11] sysreset: enable driver support in SPL/TPL
Kever Yang
- [U-Boot] [PATCH v4 06/11] image: add os type for OP-TEE
Kever Yang
- [U-Boot] [PATCH v4 07/11] spl: add support to booting with OP-TEE
Kever Yang
- [U-Boot] [PATCH v4 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL
Kever Yang
- [U-Boot] [PATCH v4 09/11] rockchip: add fit source file for pack itb with op-tee
Kever Yang
- [U-Boot] [PATCH v4 10/11] rockchip: evb-rk3229: add README file for OP-TEE support
Kever Yang
- [U-Boot] [PATCH v4 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support
Kever Yang
- [U-Boot] "Reset" values for clksel_con registers in clk_rk3399.c:rkclk_init()
Kever Yang
- [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver
Kever Yang
- [U-Boot] [PATCH 0/3] These three patches add spl for rv1108
Kever Yang
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Kever Yang
- [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot
Kever Yang
- [U-Boot] [PATCH] rockchip: dts: rk3128: update pwm-cell for pwm0
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM
Kever Yang
- [U-Boot] [PATCH] spl: atf: pass NULL for bl32_ep pc
Kever Yang
- [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE
Kever Yang
- [U-Boot] [PATCH] spl: use different BOARD_INIT MACRO for spl and tpl
Kever Yang
- [U-Boot] [RFC 0/5] sf: Update spi-nor framework
Yang, Wenyou
- [U-Boot] [RFC 0/5] sf: Update spi-nor framework
Yang, Wenyou
- [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL
Qiang Zhao
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Marc Zyngier
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Marc Zyngier
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Marc Zyngier
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Marc Zyngier
- [U-Boot] U-Boot, cache speculation side channel attacks and ARM
Marc Zyngier
- [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715
Marc Zyngier
- [U-Boot] [PATCH 1/4] mtd: nand: mxs_nand: use self init
stefan at agner.ch
- [U-Boot] [PATCH v3 0/4] arm: imx53: remove usage of mx53_dram_size
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH v3 1/4] arm: imx: cx9020: remove usage of mx53_dram_size
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH v3 2/4] arm: imx: cx9020: move dram init into common place
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH v3 3/4] arm: imx: m53evk: remove usage of mx53_dram_size
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH v3 4/4] arm: imx: mx53loco: remove usage of mx53_dram_size
linux-kernel-dev at beckhoff.com
- [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB
codekipper at gmail.com
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Mr. goldenstreet
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Mr. goldenstreet
- [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA
Mr. goldenstreet
- [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver
zhihuan he
- [U-Boot] [PATCH 2/3] rockchip: Add RV1108 SPL support
zhihuan he
- [U-Boot] [PATCH 3/3] rockchip: updata the style of reporting sdram cap
zhihuan he
- [U-Boot] [PATCH 0/3] These three patches add spl for rv1108
zhihuan he
- [U-Boot] [PATCH v7 0/3] Generic firmware loader
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 1/3] spl: Remove static declaration on spl_mmc_find_device function
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 2/3] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()
tien.fong.chee at intel.com
- [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system
tien.fong.chee at intel.com
- [U-Boot] How to debug u-boot on arm board if nothing printed via uart?
kipade
- [U-Boot] How to debug u-boot on arm board if nothing printed via uart?
kipade
- [U-Boot] [PATCH] rpi_0_w: Add configs consistent with RpI3
drew.moseley at northern.tech
- [U-Boot] [PATCH v1] EHCI: Fix endian access issue on EHCI intinalization
yinbo.zhu at nxp.com
- [U-Boot] [PATCH v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT
ying.zhang22455 at nxp.com
- [U-Boot] AM3703 does not boot from MicroSD card
phantom0
- [U-Boot] [PATCH 0/3] These three patches add spl for rv1108
huan.he at rock-chips.com
- [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env
christopher.spinrath at rwth-aachen.de
- [U-Boot] [PATCH 2/2] ARM: imx: cm_fx6: env: try to determine dtb to use
christopher.spinrath at rwth-aachen.de
- [U-Boot] [PATCH 0/2] Rename serial_stm32x7.c to serial_stm32.c
patrice.chotard at st.com
- [U-Boot] [PATCH 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c
patrice.chotard at st.com
- [U-Boot] [PATCH 2/2] configs: stm32: move config flag from defconfig to Kconfig
patrice.chotard at st.com
- [U-Boot] [PATCH 0/3] STM32: Remove STMMAC clock setup from board
patrice.chotard at st.com
- [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
patrice.chotard at st.com
- [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup
patrice.chotard at st.com
- [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
patrice.chotard at st.com
- [U-Boot] [PATCH 0/6] Add stmf429-evaluation board support
patrice.chotard at st.com
- [U-Boot] [PATCH 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot
patrice.chotard at st.com
- [U-Boot] [PATCH 2/6] clk: stm32: retrieve external oscillator frequency from DT
patrice.chotard at st.com
- [U-Boot] [PATCH 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series
patrice.chotard at st.com
- [U-Boot] [PATCH 4/6] board: stm32: Add stm32f429-evaluation board support
patrice.chotard at st.com
- [U-Boot] [PATCH 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support
patrice.chotard at st.com
- [U-Boot] [PATCH 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file
patrice.chotard at st.com
- [U-Boot] [PATCH v2 0/3] STM32: Remove STMMAC clock setup from board
patrice.chotard at st.com
- [U-Boot] [PATCH v2 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746
patrice.chotard at st.com
- [U-Boot] [PATCH v2 2/3] clk: clk_stm32f: Remove STMMAC clock setup
patrice.chotard at st.com
- [U-Boot] [PATCH v2 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()
patrice.chotard at st.com
- [U-Boot] [PATCH] clk: clk_stm32f: Fix PLLSAICFGR_PLLSAIP_4 divider value
patrice.chotard at st.com
- [U-Boot] [PATCH] board: stm32: Fix stm32f746-disco boot
patrice.chotard at st.com
- [U-Boot] [PATCH] clk: clk_stm32: Add .set_rate callback
patrice.chotard at st.com
- [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs
patrice.chotard at st.com
- [U-Boot] [PATCH 1/8] mach-stm32: Add get_cpu_id support
patrice.chotard at st.com
- [U-Boot] [PATCH 2/8] mach-stm32: Move BOARD_LATE_INIT flag to mach-stm32 Kconfig
patrice.chotard at st.com
- [U-Boot] [PATCH 3/8] board: stm32f429-discovery: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH 4/8] board: stm32h743-evaluation: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH 5/8] board: stm32f743-discovery: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH 6/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH 7/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH 8/8] board: stm32f429-evaluation: Add set_env_soc_name() in board_late_init()
patrice.chotard at st.com
- [U-Boot] [PATCH] git_meg_1
DH at synoia.com
- [U-Boot] [PATCH] TCP and wget implementation. Patch V5, 3 of 3.
DH at synoia.com
- [U-Boot] X86 Broadwell-DE override FSP configuration
vnktux
- [U-Boot] X86 Broadwell-DE override FSP configuration
vnktux
- [U-Boot] Broadwell-DE booting time
vnktux
- [U-Boot] [PATCH 1/1] Broadwell-DE Implementation
vnktux
- [U-Boot] [PATCH 1/6] Add Broadwell-DE architecture cpu files
vnktux
- [U-Boot] [PATCH 2/6] Add Broadwell-DE include header files
vnktux
- [U-Boot] [PATCH 3/6] Implemented support for SPD memory file required by BDE FSP
vnktux
- [U-Boot] [PATCH 4/6] Add DTS for Broadwell-DE platform board
vnktux
- [U-Boot] [PATCH 5/6] Add Poseidon platform, based on BDE with memory down
vnktux
- [U-Boot] [PATCH 6/6] Updated Makefile and Kconfig in order to build BDE
vnktux
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FW: u-boot v2016 vs v2013
Mehmet Ali İPİN
- [U-Boot] FEC Clock
Mehmet Ali İPİN
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Jernej Škrabec
- [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Jernej Škrabec
- [U-Boot] [PATCH] aes: Allow non-zero initialization vector
Андрей Мозжухин
- [U-Boot] sandbox and spi emulation (err=-19 Invalid bus 0 for spec)
Славкин Олег
- [U-Boot] [PATCH v2 01/12] riscv: cpu: Add nx25 to support RISC-V
陳建志
- [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V
陳建志
Last message date:
Wed Jan 31 23:43:07 UTC 2018
Archived on: Wed Jan 31 23:43:29 UTC 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).