[U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig

[York Sun]

On 01/11/2018 01:30 AM, Ashish Kumar wrote:
> 
> 
>> -----Original Message-----
>> From: York Sun
>> Sent: Monday, January 08, 2018 11:15 PM
>> To: Ashish Kumar <ashish.kumar at nxp.com>; u-boot at lists.denx.de
>> Subject: Re: [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT
>> defconfig
>>
>> On 01/01/2018 09:24 PM, Ashish Kumar wrote:
>>> Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
>>> ---
>>> depends on:
>>>
>> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
>>>
>> chwork.ozlabs.org%2Fpatch%2F853615%2F&data=02%7C01%7Cyork.sun%40
>> nxp.co
>>>
>> m%7C71f45df66ff84071f9c808d551a1227d%7C686ea1d3bc2b4c6fa92cd99c5c
>> 30163
>>>
>> 5%7C0%7C0%7C636504674867120576&sdata=Qupa0iJaMMXN%2BHVOsCkYL
>> 8Y0IycNRSx
>>> ULBG2NFsWyww%3D&reserved=0
>>
>> Your dependency is to increase the CONFIG_SYS_MONITOR_LEN. Why are
>> you still using raw U-Boot image. If you use FIT image, the size should be
>> correct. Please try.
>>
> By FIT image you mean, image that has header in starting, this header contains size information?
> I did this in patch http://patchwork.ozlabs.org/patch/794217/. But It was not accepted. So, I had to drop this patch and change length of CONFIG_SYS_MONITOR_LEN
> 

OK. If you are using raw image, this length adjustment is needed.

York