January 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jan 1 13:29:25 UTC 2018
Ending: Wed Jan 31 23:43:07 UTC 2018
Messages: 3715

• [U-Boot] [PATCH] ARM: omap3: evm: Do not relocate FDT address   Tom Rini
• [U-Boot] [PATCH] Travis-CI: Split 't208xrdb t4qds t102*'-job into separate jobs   Tom Rini
• [U-Boot] [PATCH v3 6/6] board: ti: k2g: Make ddr3* declarations as static   Tom Rini
• [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH] ARM: omap3: evm: Do not relocate FDT address   Derald Woods
• [U-Boot] uboot img   Ivan Yakymenko
• [U-Boot] [PATCH 1/1] fs: remove distractive message in fs_read()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fs/fat: remove distractive message in file_fat_read_at()   Heinrich Schuchardt
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Stefan Agner
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Fabio Estevam
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefan Agner
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefan Agner
• [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig   Stefan Agner
• [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER   Stefan Agner
• [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL   Stefan Agner
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] [U-Boot, 1/3] ARM: dts: omap3-evm: Add support for TMDSEVM{3530, 3730}   Tom Rini
• [U-Boot] [U-Boot, 3/3] ARM: omap3: evm: Refactor 'board_eth_init'   Tom Rini
• [U-Boot] power: tps65910: replace error() by pr_err()   Tom Rini
• [U-Boot] [U-Boot, 1/1] dm: core: remove orphaned parameter description in platdata.h   Tom Rini
• [U-Boot] [U-Boot, v4, 2/3] ARM: dts: omap3-evm: Enable DM and devicetree for TMDSEVM{3530, 3730}   Tom Rini
• [U-Boot] ARM: omap3: evm: Do not relocate FDT address   Tom Rini
• [U-Boot] configs: am335x_boneblack: Bring back missed bootcmd   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.01-rc3 released   Tom Rini
• [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL   Fabio Estevam
• [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL   Peng Fan
• [U-Boot] U-Boot and Builman Toolchains   Tom Rini
• [U-Boot] [PATCH 1/7] ARM: imx: Introduce dts for i.MX6SX-SDB   Peng Fan
• [U-Boot] [PATCH 2/7] ARM: imx: Enable dts for i.MX6SX-SDB   Peng Fan
• [U-Boot] [PATCH 3/7] board: freescale: common: add pfuze dm code   Peng Fan
• [U-Boot] [PATCH 4/7] pci: imx: request gpio before use   Peng Fan
• [U-Boot] [PATCH 5/7] imx: mx6sxsabresd: Enable DM driver   Peng Fan
• [U-Boot] [PATCH 6/7] imx: mx6sxsabresd: config wdog pinmux   Peng Fan
• [U-Boot] [PATCH 7/7] imx: mx6sxsabresd: enlarge ENV offset   Peng Fan
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jun Nie
• [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig   Ashish Kumar
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   Ashish Kumar
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Add PHY-less SGMII support   Ashish Kumar
• [U-Boot] [PATCH] Revert "Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL"   Peng Fan
• [U-Boot] [PATCH v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM   Faiz Abbas
• [U-Boot] [PATCH 1/2] spi: fsl_qspi: support i.MX6UL/7D   Peng Fan
• [U-Boot] [PATCH 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver   Peng Fan
• [U-Boot] [PATCH 1/2] video: ipu: Fix dereferencing NULL pointer problem   Peng Fan
• [U-Boot] [PATCH 2/2] video: Support multiple lines version string display   Peng Fan
• [U-Boot] [PATCH 1/2] i2c: lpi2c: do not add 4 for bus seq   Peng Fan
• [U-Boot] [PATCH 2/2] imx: mx7ulp: modify lpi2c seq number   Peng Fan
• [U-Boot] [PATCH] misc: mxc_ocotp: check fuse word before programming on i.MX7ULP   Peng Fan
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix eMMC 1.8v setting issue   Peng Fan
• [U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support   Lukasz Majewski
• [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Jagan Teki
• [U-Boot] [PATCH 0/3][v2] sf: Update spi-nor framework   Jagan Teki
• [U-Boot] [PATCH] Revert "Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL"   Fabio Estevam
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Prabhakar Kushwaha
• [U-Boot] [PATCH V2] pci: imx: request gpio before use   Peng Fan
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH 4/7] pci: imx: request gpio before use   Fabio Estevam
• [U-Boot] [PATCH 4/7] pci: imx: request gpio before use   Peng Fan
• [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2   Stefan Mavrodiev
• [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Breno Matheus Lima
• [U-Boot] [PATCH] boards: amlogic: khadas-vim: Typo fixup   Neil Armstrong
• [U-Boot] [PATCH] boards: amlogic: khadas-vim: Typo fixup   Tom Rini
• [U-Boot] How to specify new file size and CRC32 checksum for modified Linux Kernel Image?   A.W.C.
• [U-Boot] [PATCH v3 00/25] Fix and extend i.MX HAB layer   Breno Matheus Lima
• [U-Boot] [PATCH V3] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] How to specify new file size and CRC32 checksum for modified Linux Kernel Image?   A.W.C.
• [U-Boot] [PATCH] wait_bit: add big endian version of wait_for_bit function   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig   Andrew F. Davis
• [U-Boot] [PATCH 1/1] MAINTAINERS: correct entry for lib/efi*/   Heinrich Schuchardt
• [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig   Andreas Färber
• [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig   Dr. Philipp Tomsich
• [U-Boot] [PATCH V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board   Stefano Babic
• [U-Boot] [PATCH v2 1/1] MAINTAINERS: correct entry for lib/efi*/   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] spi: fsl_qspi: support i.MX6UL/7D   Fabio Estevam
• [U-Boot] [PATCH v3 00/25] Fix and extend i.MX HAB layer   Bryan O'Donoghue
• [U-Boot] [PATCH 1/3] Convert CONFIG_TWL4030_USB to Kconfig   Adam Ford
• [U-Boot] [PATCH 2/3] Convert CONFIG_OMAP_USB_PHY to Kconfig   Adam Ford
• [U-Boot] [PATCH 3/3] Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig   Adam Ford
• [U-Boot] [PATCH v4 00/25] Fix and extend i.MX HAB layer   Bryan O'Donoghue
• [U-Boot] [PATCH v4 01/25] arm: imx: hab: Make authenticate_image return int   Bryan O'Donoghue
• [U-Boot] [PATCH v4 02/25] arm: imx: hab: Fix authenticate_image result code   Bryan O'Donoghue
• [U-Boot] [PATCH v4 03/25] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail   Bryan O'Donoghue
• [U-Boot] [PATCH v4 04/25] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail   Bryan O'Donoghue
• [U-Boot] [PATCH v4 05/25] arm: imx: hab: Move IVT_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v4 06/25] arm: imx: hab: Move CSF_PAD_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v4 07/25] arm: imx: hab: Fix authenticate_image input parameters   Bryan O'Donoghue
• [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7   Bryan O'Donoghue
• [U-Boot] [PATCH v4 09/25] arm: imx: hab: Add IVT header definitions   Bryan O'Donoghue
• [U-Boot] [PATCH v4 10/25] arm: imx: hab: Add IVT header verification   Bryan O'Donoghue
• [U-Boot] [PATCH v4 11/25] arm: imx: hab: Verify IVT self matches calculated address   Bryan O'Donoghue
• [U-Boot] [PATCH v4 12/25] arm: imx: hab: Only call ROM once headers are verified   Bryan O'Donoghue
• [U-Boot] [PATCH v4 13/25] arm: imx: hab: Print CSF based on IVT descriptor   Bryan O'Donoghue
• [U-Boot] [PATCH v4 14/25] arm: imx: hab: Print additional IVT elements during debug   Bryan O'Donoghue
• [U-Boot] [PATCH v4 15/25] arm: imx: hab: Define rvt_check_target()   Bryan O'Donoghue
• [U-Boot] [PATCH v4 16/25] arm: imx: hab: Implement hab_rvt_check_target   Bryan O'Donoghue
• [U-Boot] [PATCH v4 17/25] arm: imx: hab: Add a hab_rvt_check_target to image auth   Bryan O'Donoghue
• [U-Boot] [PATCH v4 18/25] arm: imx: hab: Print HAB event log only after calling ROM   Bryan O'Donoghue
• [U-Boot] [PATCH v4 19/25] arm: imx: hab: Make internal functions and data static   Bryan O'Donoghue
• [U-Boot] [PATCH v4 20/25] arm: imx: hab: Prefix authenticate_image with imx_hab   Bryan O'Donoghue
• [U-Boot] [PATCH v4 21/25] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled   Bryan O'Donoghue
• [U-Boot] [PATCH v4 22/25] arm: imx: hab: Make imx_hab_is_enabled global   Bryan O'Donoghue
• [U-Boot] [PATCH v4 23/25] arm: imx: hab: Define rvt_failsafe()   Bryan O'Donoghue
• [U-Boot] [PATCH v4 24/25] arm: imx: hab: Implement hab_rvt_failsafe   Bryan O'Donoghue
• [U-Boot] [PATCH v4 25/25] arm: imx: hab: Add hab_failsafe console command   Bryan O'Donoghue
• [U-Boot] rockchip: rk3399-puma: reduce env size to 8kiB   Philipp Tomsich
• [U-Boot] rockchp: dts: rk3399-evb: support boot from sd-card   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 1/2] drivers/reset: support rockchip reset drivers   Philipp Tomsich
• [U-Boot] [U-Boot,v5,2/2] rockchip: clk: bind reset driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 01/11] lib: add TPL_OF_LIBFDT option for TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/11] arm: add option for TPL ARCH_MEM in arm 32bit   Philipp Tomsich
• [U-Boot] [U-Boot,v3,03/11] arm: add a separate stack for TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/11] sysreset: enable driver support in SPL/TPL   Philipp Tomsich
• [U-Boot] [U-Boot,v3,06/11] image: add os type for OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/11] rockchip: add fit source file for pack itb with op-tee   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/11] rockchip: evb-rk3229: add README file for OP-TEE support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [PATCH V3] Convert CONFIG_SOC_DA8XX et al to Kconfig   David Lechner
• [U-Boot] [U-Boot, v3, 01/11] lib: add TPL_OF_LIBFDT option for TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/11] arm: add option for TPL ARCH_MEM in arm 32bit   Philipp Tomsich
• [U-Boot] [U-Boot,v3,03/11] arm: add a separate stack for TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/11] sysreset: enable driver support in SPL/TPL   Philipp Tomsich
• [U-Boot] [U-Boot,v3,06/11] image: add os type for OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/11] rockchip: add fit source file for pack itb with op-tee   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/11] rockchip: evb-rk3229: add README file for OP-TEE support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support   Philipp Tomsich
• [U-Boot] [PATCH] rockchip: board: lion-rk3368: reduce env-size default to 8KiB   Philipp Tomsich
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH v6 00/11] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 02/11] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 03/11] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 04/11] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 05/11] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 06/11] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 07/11] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 08/11] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 09/11] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 11/11] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   David Lechner
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option   Philipp Tomsich
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Philipp Tomsich
• [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function   Daniel Schwierzeck
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Anand Moon
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   David Lechner
• [U-Boot] [PATCH] net: sh-eth: Fix coding style checked by checkpatch.pl   Joe Hershberger
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   David Lechner
• [U-Boot] [PATCH] ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs   Joe Hershberger
• [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c   Emmanuel Vadot
• [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot   Emmanuel Vadot
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Lukasz Majewski
• [U-Boot] [PATCH V4] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board   Fabio Estevam
• [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER   Stephen Warren
• [U-Boot] [PATCH V2 1/2] spi: fsl_qspi: support i.MX6UL/6ULLL/7D   Peng Fan
• [U-Boot] [PATCH V2 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver   Peng Fan
• [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7   Breno Matheus Lima
• [U-Boot] [PATCH v2] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Peng Fan
• [U-Boot] [PATCH 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option   Kever Yang
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Kever Yang
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Anand Moon
• [U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support   Yuantian Tang
• [U-Boot] [PATCH 2/2] arm64: ls1012a: Add sata distro boot support   Yuantian Tang
• [U-Boot] [PATCH] cmd: pmic: update help description   Klaus Goger
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Lukasz Majewski
• [U-Boot] [PATCH v6 0/2] Generic firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Vignesh R
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Vignesh R
• [U-Boot] [PATCH] cmd: pmic: update help description   Lukasz Majewski
• [U-Boot] [PATCH 00/11] Introduce variables whitelisting in environment   Quentin Schulz
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Jagan Teki
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Vignesh R
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Jagan Teki
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [PATCH 2/2] imx7: spl: Add support for MMC3, SD3 and NAND boot devices   Eran Matityahu
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Lukasz Majewski
• [U-Boot] [PATCH 03/11] env: add support for whitelisting variables from secondary environments   Quentin Schulz
• [U-Boot] [PATCH v2 1/2] video: ipu: Fix dereferencing NULL pointer problem   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: Support multiple lines version string display   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/2] video: ipu: Fix dereferencing NULL pointer problem   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Uri Mashiach
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Mr. goldenstreet
• [U-Boot] [PATCH] aes: Allow non-zero initialization vector   Андрей Мозжухин
• [U-Boot] [PATCH] mx6: Add board mx6memcal for use in validating DDR   Stefano Babic
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Stefano Babic
• [U-Boot] [PATCH 4/5] Kconfig: mx6ull: Deselect MX6UL from CONFIG_MX6ULL   Fabio Estevam
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Dr. Philipp Tomsich
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefano Babic
• [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL   Stefano Babic
• [U-Boot] [PATCH V2] pci: imx: request gpio before use   Stefano Babic
• [U-Boot] rockchip: board: lion-rk3368: reduce env-size default to 8KiB   Philipp Tomsich
• [U-Boot] [U-Boot, 1/2] spl: atf: add SPL_ATF_NO_PLATFORM_PARAM option   Philipp Tomsich
• [U-Boot] [U-Boot, 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Philipp Tomsich
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header   Tom Rini
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jagan Teki
• [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL   Tom Rini
• [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/   Tom Rini
• [U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary   Tom Rini
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [PATCH] TCP and wget implementation v3   Joe Hershberger
• [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL   Tom Rini
• [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL   Tom Rini
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL   Tom Rini
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL   Tom Rini
• [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL   Tom Rini
• [U-Boot] [PATCH] GPIO: pca953x: Rework to not include commands in SPL   Tom Rini
• [U-Boot] [PATCH] GPIO: tca642x: Rework to not include commands in SPL   Tom Rini
• [U-Boot] [PATCH v1 03/10] mmc: remove unneeded verification in mmc_set_card_speed()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH v2 23/78] net: tsec: Fix memory leak in error path   Joe Hershberger
• [U-Boot] [PATCH v2 24/78] net: tsec: Make live-tree compatible   Joe Hershberger
• [U-Boot] [PATCH v2 74/78] phy: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH v2 22/78] net: tsec: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH v2 67/78] cmd: mdio: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH v2 32/78] net: phy: marvell: Fix style violations   Joe Hershberger
• [U-Boot] [PATCH 1/3] mx6memcal: Fix the UART ports for mx6sabresd/auto boards   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6memcal: spl: Also take i.MX6ULL into account   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6memcal: spl: Disambiguate the error message   Fabio Estevam
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] mx6: Support SKS-Kinkel sksimx6 Board   Stefano Babic
• [U-Boot] [PATCH V2] mx6: Support SKS-Kinkel sksimx6 Board   Stefano Babic
• [U-Boot] [PATCH V2] mx6: Support SKS-Kinkel sksimx6 Board   Fabio Estevam
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Heinrich Schuchardt
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL   Tim Harvey
• [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL   Fabio Estevam
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL   Fabio Estevam
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL   Fabio Estevam
• [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL   Fabio Estevam
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Fabio Estevam
• [U-Boot] [PATCH 1/1] fs: remove distractive message in fs_read()   Simon Glass
• [U-Boot] [PATCH 1/1] fs/fat: remove distractive message in file_fat_read_at()   Simon Glass
• [U-Boot] [PATCH] patman: Unquote output from get_maintainer.pl   Simon Glass
• [U-Boot] [PATCH] net: sh-eth: Add to Kconfig and convert   Joe Hershberger
• [U-Boot] [PATCH] phy: atheros: set auto-negotiation for AR8021   Joe Hershberger
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] U-boot on Acer Chromebook R13   Arthur Autin
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Tom Rini
• [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL   Max Krummenacher
• [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header   Stephen Warren
• [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header   Tom Rini
• [U-Boot] [PATCH v4 08/25] arm: imx: hab: Fix authenticate image lockup on MX7   Bryan O'Donoghue
• [U-Boot] [PATCH] TCP and wget implementation v3   Duncan Hare
• [U-Boot] [PATCH] TCP and wget implementation v3   Joe Hershberger
• [U-Boot] [PATCH 1/2] ARMv8: add optional Linux kernel image header   Stephen Warren
• [U-Boot] [PATCH V2 1/2] ARMv8: add optional Linux kernel image header   Stephen Warren
• [U-Boot] [PATCH V2 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER   Stephen Warren
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH 1/3] ARM: Tegra186: mem parsing fixes from downstream   Stephen Warren
• [U-Boot] [PATCH 2/3] ARM: Tegra186: search for best RAM bank   Stephen Warren
• [U-Boot] [PATCH 3/3] ARM: tegra: p2771-000: increase max DRAM bank count   Stephen Warren
• [U-Boot] [PATCH v4 0/4] net: phy: Add Broadcom BCM53xx switch driver   Joe Hershberger
• [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL   Tom Warren
• [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL   Stephen Warren
• [U-Boot] [PATCH] TCP and wget implementation v4   Duncan Hare
• [U-Boot] [PATCH 1/4] ARM: tegra: don't use CONFIG_SPL_TEXT_BASE when no SPL   Tom Warren
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-rockchip/master   Tom Rini
• [U-Boot] [RFC 0/5] sf: Update spi-nor framework   Yang, Wenyou
• [U-Boot] [PATCH v10 03/27] mtd: add SPI-NOR core support   Andy Yan
• [U-Boot] [U-Boot, v3, 04/11] rockchip: rk322x: enable tpl support   Kever Yang
• [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE   Kever Yang
• [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes   Jagan Teki
• [U-Boot] [PATCH 0/7] Add support of SD3.0 UHS modes for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/7] mmc: sdhci: Add support for disabling clock   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/7] mmc: sdhci: Handle execute tuning command in sdhci_send_command   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 3/7] sdhci: Add new sdhci ops for platform specific tuning and delays   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 4/7] mmc: sdhci: Invoke platform specific tuning and delay routines   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 5/7] mmc : sdhci: Read capabilities register1 and update host caps   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 6/7] mmc: zynq_sdhci: Add support for SD3.0   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] spl: include timezone in banner   Klaus Goger
• [U-Boot] [PATCH v10 24/27] env: add spi-nor environment   Prabhakar Kushwaha
• [U-Boot] [PATCH v4 00/11] rockchip: add tpl and OPTEE support for rk3229   Kever Yang
• [U-Boot] [PATCH v4 01/11] lib: add TPL_OF_LIBFDT option for TPL   Kever Yang
• [U-Boot] [PATCH v4 02/11] arm: add option for TPL ARCH_MEM in arm 32bit   Kever Yang
• [U-Boot] [PATCH v4 03/11] arm: add a separate stack for TPL   Kever Yang
• [U-Boot] [PATCH v4 04/11] rockchip: rk322x: enable tpl support   Kever Yang
• [U-Boot] [PATCH v4 05/11] sysreset: enable driver support in SPL/TPL   Kever Yang
• [U-Boot] [PATCH v4 06/11] image: add os type for OP-TEE   Kever Yang
• [U-Boot] [PATCH v4 07/11] spl: add support to booting with OP-TEE   Kever Yang
• [U-Boot] [PATCH v4 08/11] rockchip: rk322x: dts: enable uart2 for SPL/TPL   Kever Yang
• [U-Boot] [PATCH v4 09/11] rockchip: add fit source file for pack itb with op-tee   Kever Yang
• [U-Boot] [PATCH v4 10/11] rockchip: evb-rk3229: add README file for OP-TEE support   Kever Yang
• [U-Boot] [PATCH v4 11/11] rockchip: evb-rk322x: update defconfig with tpl and optee support   Kever Yang
• [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/2] zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Michal Simek
• [U-Boot] [PATCH] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Uri Mashiach
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL   Alison Wang
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Stefano Babic
• [U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefano Babic
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Fabio Estevam
• [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/7] mmc: sdhci: Handle execute tuning command in sdhci_send_command   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 3/7] sdhci: Add new sdhci ops for platform specific tuning and delays   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 4/7] mmc: sdhci: Invoke platform specific tuning and delay routines   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 5/7] mmc : sdhci: Read capabilities register1 and update host caps   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 6/7] mmc: zynq_sdhci: Add support for SD3.0   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 7/7] zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Peng Fan
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [RFC 0/5] sf: Update spi-nor framework   Prabhakar Kushwaha
• [U-Boot] [RFC 0/5] sf: Update spi-nor framework   Jagan Teki
• [U-Boot] [RFC 0/5] sf: Update spi-nor framework   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] nand: arasan_nfc: Move common ecc struct initialization init routine   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] nand: arasan_nfc: Add support for ondie ecc   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 3/3] nand: arasan_nfc: Use the calculated ecc address for updating ecc register   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] cmd: nvedit: add whitelist option for env import   Quentin Schulz
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Stefano Babic
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [U-Boot, v3, 07/11] spl: add support to booting with OP-TEE   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Stefano Babic
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Vignesh R
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Uri Mashiach
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Eran Matityahu
• [U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices   Stefano Babic
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Fabio Estevam
• [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree   Maxime Ripard
• [U-Boot] [PATCH] drivers: pci: imx: fix enumeration logic error   Koen Vandeputte
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Mr. goldenstreet
• [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 1/9] common: do not compile common fastboot code when building the SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 2/9] mmc: atmel: when sending a data command, use the provided block size   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 3/9] mmc: compile out more code if support for UHS and HS200 is not enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 4/9] mmc: reworked version lookup in mmc_startup_v4   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 5/9] mmc: add a Kconfig option to enable the support for MMC write operations   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 6/9] mmc: read ssr only if MMC write support is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 7/9] mmc: compile out erase and write mmc commands if write operations are not enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 8/9] mmc: don't read the size of eMMC enhanced user data area in SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 9/9] mmc: remove hc_wp_grp_size from struct mmc if not needed   Jean-Jacques Hiblot
• [U-Boot] [RFC PATCH] ubifs: Remove functions which call functions which are not present   Michal Simek
• [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core   Joakim Tjernlund
• [U-Boot] [PATCH] ARM: sunxi: Remove left-over cd-inverted property from pcDuino3   Maxime Ripard
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Jörg Krause
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefano Babic
• [U-Boot] [PATCH v1] x86: tangier: Use actual GPIO hardware numbers   Andy Shevchenko
• [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers   Andy Shevchenko
• [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table   Andy Shevchenko
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   York Sun
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] ARM: Tegra186: don't map memory not in RAM banks   Stephen Warren
• [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL   York Sun
• [U-Boot] "Reset" values for clksel_con registers in clk_rk3399.c:rkclk_init()   Dr. Philipp Tomsich
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   York Sun
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Fabio Estevam
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   Fabio Estevam
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Fabio Estevam
• [U-Boot] [PATCH] crypto/fsl: fix BLOB encapsulation and decapsulation   Clemens Gruber
• [U-Boot] [PATCH 1/5] fs: Migrate ext4 to Kconfig   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/5] ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE   Tuomas Tynkkynen
• [U-Boot] [PATCH 3/5] env: ENV_IS_IN_FAT improvements   Tuomas Tynkkynen
• [U-Boot] [PATCH 4/5] fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description   Tuomas Tynkkynen
• [U-Boot] [PATCH 5/5] fs: fat: Drop CONFIG_SUPPORT_VFAT   Tuomas Tynkkynen
• [U-Boot] [RFC 0/5] sf: Update spi-nor framework   Yang, Wenyou
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   York Sun
• [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL   Qiang Zhao
• [U-Boot] [PATCH 1/3] mx7_common: use psci 1.0 instead of 0.1   Anson Huang
• [U-Boot] [PATCH 2/3] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support   Anson Huang
• [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param   Peng Fan
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   Sumit Garg
• [U-Boot] [PATCH 1/3] board: engicam: Fix to remove legacy board/icorem6_rqs   Jagan Teki
• [U-Boot] [PATCH 2/3] arm: i.MX6: nand boot device slection   Jagan Teki
• [U-Boot] [PATCH 3/3] mtd: nand: mxs_nand_spl: Remove nand size print   Jagan Teki
• [U-Boot] [PATCH 2/3] arm: i.MX6: fix nand boot device slection   Jagan Teki
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Jun Nie
• [U-Boot] [PATCH 1/6] sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3   Jun Nie
• [U-Boot] [PATCH 2/6] sunxi: musb: Add fifo config for H3   Jun Nie
• [U-Boot] [PATCH 3/6] sunxi: musb: Enable OTG device clock for H3   Jun Nie
• [U-Boot] [PATCH 4/6] sunxi: musb: Hack dynamic fifo support for H3 OTG   Jun Nie
• [U-Boot] [PATCH 5/6] sunxi: usb_phy: Clear PHYCTL register before writing   Jun Nie
• [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support   Jun Nie
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Jagan Teki
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Jun Nie
• [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support   Maxime Ripard
• [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support   Jun Nie
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Jun Nie
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Chen-Yu Tsai
• [U-Boot] [PATCH 1/6] sunxi: h3: add usb_otg and OHCI/EHCI for usbc0 on H3   Jagan Teki
• [U-Boot] [PATCH 2/6] sunxi: musb: Add fifo config for H3   Jagan Teki
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Jun Nie
• [U-Boot] [PATCH 0/6] Add Bananapi Zero board with OTG supported   Chen-Yu Tsai
• [U-Boot] [PATCH 03/14] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH 11/11] sunxi: Add limit with the MMC environment   Maxime Ripard
• [U-Boot] [RFC PATCH 0/1] Add Rockchip SFC driver under mtd/spi-nor framework   Andy Yan
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [RFC PATCH] mtd: spi-nor: add rockchip sfc driver   Andy Yan
• [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes   Maxime Ripard
• [U-Boot] [PATCH 00/11] sunxi: arm64 binary size fixes   Jagan Teki
• [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig   Stefan Agner
• [U-Boot] [PATCH 01/03] spmi: msm: display the PMIC Arb version (debug)   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/03] poplar: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/03] dm: core: parse chosen node   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 01/05] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/05] arm: mach-snapdragon: refactor clock driver   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 04/05] db820c: enable pmic gpios for pm8994   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 01/07] db410c: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 05/07] db410c: use the device tree parsed by the lk loader.   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 06/07] db410c: add reserved-memory node to dts   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 0/3] Add new targets for Xilinx ZynqMP SoC   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/3] xilinx: zynqmp: Add new target with only qspi enabled   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] xilinx: zynqmp: Add new target with only nand enabled   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 3/3] xilinx: zynqmp: Add new target with only emmc enabled   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] armv8: ls1088ardb: Put distro boot functions under CONFIG_SPL_BUILD   Ashish Kumar
• [U-Boot] FIT nand boot fail to load U-Boot proper   Jagan Teki
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jagan Teki
• [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig   Fabio Estevam
• [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER   Fabio Estevam
• [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL   Fabio Estevam
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   Clemens Gruber
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   Sumit Garg
• [U-Boot] [PATCH 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig   Stefano Babic
• [U-Boot] [PATCH] armv8: ls1088ardb: Put distro boot functions under CONFIG_SPL_BUILD   Sumit Garg
• [U-Boot] [PATCH v1 0/6] Add support for DM_USB for TI's DRA7 platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 1/6] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 2/6] syscon: dm: Add a new method to get a regmap from DTS   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 3/6] phy: Add a new driver for OMAP's USB2 PHYs   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 4/6] usb: omap5: Add glue logic to support DM for USB host   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 5/6] configs: enable DM_USB for all the platforms of the DRA7 family   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 6/6] dts: dra7x: enable host on USB2 for all the platforms of the DRA7 family   Jean-Jacques Hiblot
• [U-Boot] [PATCH 2/3] imx: introduce CONFIG_GPT_TIMER   Stefan Agner
• [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL   Stefan Agner
• [U-Boot] [PATCH 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig   Stefan Agner
• [U-Boot] [PATCH v2 2/3] imx: introduce CONFIG_GPT_TIMER   Stefan Agner
• [U-Boot] [PATCH v2 3/3] imx: initialize and use generic timer on i.MX 6UL/ULL   Stefan Agner
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH v2] crypto/fsl: fix BLOB encapsulation and decapsulation   York Sun
• [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction   Sumit Garg
• [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction   York Sun
• [U-Boot] [[PATCH v2] 0/8] sunxi: Enable OTG peripheral and host mode on H3   Jun Nie
• [U-Boot] [[PATCH v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT   Jun Nie
• [U-Boot] [[PATCH v2] 2/8] sunxi: musb: Add fifo config for H3   Jun Nie
• [U-Boot] [[PATCH v2] 3/8] sunxi: Fix USB PHY index for H3/H5/A64   Jun Nie
• [U-Boot] [[PATCH v2] 4/8] sunxi: musb: Hack dynamic fifo support for H3 OTG   Jun Nie
• [U-Boot] [[PATCH v2] 5/8] sunxi: musb: Enable OTG device clock for H3   Jun Nie
• [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing   Jun Nie
• [U-Boot] [[PATCH v2] 7/8] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64   Jun Nie
• [U-Boot] [[PATCH v2] 8/8] sunxi: H3: set different otg base address per mode   Jun Nie
• [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction   Sumit Garg
• [U-Boot] [u-boot-release] [PATCH 2/3] armv8: ls1088a: SPL size reduction   York Sun
• [U-Boot] exFAT support in u-boot   Arun Kuttiyara Varghese
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options   Masahiro Yamada
• [U-Boot] [PATCH] board: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI starter kit   Jagan Teki
• [U-Boot] [PATCH] TCP and wget implementation v4   Joe Hershberger
• [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support   Troy Kisky
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH] ARM: bootm: don't assume sp is in DRAM bank 0   Stephen Warren
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH] TCP and wget implementation v4   Duncan Hare
• [U-Boot] exFAT support in u-boot   Lukasz Majewski
• [U-Boot] [PATCH] TCP and wget implementation v4   Joe Hershberger
• [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1   Anson Huang
• [U-Boot] [PATCH V2 2/3] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH V2 3/3] imx: mx7: psci: add system power off support   Anson Huang
• [U-Boot] [PATCH 3/3] imx: mx7: psci: add system power off support   Anson Huang
• [U-Boot] [PATCH v2 1/3] armv8: fsl-layerscape: SPL size reduction   Sumit Garg
• [U-Boot] [PATCH v2 2/3] armv8: ls1088a: SPL size reduction   Sumit Garg
• [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support   Sumit Garg
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH 0/3] ARM: uniphier: updates for v2017.03 MW   Masahiro Yamada
• [U-Boot] [PATCH 1/3] ARM: uniphier: do not use RAM that exceeds 32 bit address range   Masahiro Yamada
• [U-Boot] [PATCH 2/3] ARM: uniphier: enable CONFIG_MMC_SDHCI_SDMA for ARMv8 SoCs   Masahiro Yamada
• [U-Boot] [PATCH 3/3] ARM: uniphier: hide memory top by platform hook instead of CONFIG   Masahiro Yamada
• [U-Boot] [PATCH 1/2] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c   Masahiro Yamada
• [U-Boot] [PATCH 2/2] libfdt: fix <linux/libfdt.h>   Masahiro Yamada
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1   Fabio Estevam
• [U-Boot] [PATCH V2 2/3] imx: mx7: psci: add system reset support   Fabio Estevam
• [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings   Jason Rush
• [U-Boot] [PATCH v5 1/5] spi: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v5 3/5] config: cadence_spi: Remove defines read from DT   Jason Rush
• [U-Boot] [PATCH v5 4/5] dts: k2g: Clean-up indentation   Jason Rush
• [U-Boot] [PATCH v5 5/5] dts: cadence_spi: Update documentation for DT bindings   Jason Rush
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jason Rush
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()   Marek Vasut
• [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Marek Vasut
• [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks   Marek Vasut
• [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1   Marek Vasut
• [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support   Marek Vasut
• [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences   Marek Vasut
• [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Enable HS200 mode on RCar Gen3   Marek Vasut
• [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()   Marek Vasut
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jason Rush
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Fabio Estevam
• [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM   Heinrich Schuchardt
• [U-Boot] "fdt" commands in extlinux.conf ?   Ken Harris
• [U-Boot] [PATCH] ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4   Derald D. Woods
• [U-Boot] [PATCH V2 1/3] mx7_common: use psci 1.0 instead of 0.1   Anson Huang
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH V2] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH V3 1/3] mx7_common: use psci 1.0 instead of 0.1   Anson Huang
• [U-Boot] [PATCH V3 2/3] imx: mx7: psci: add system reset support   Anson Huang
• [U-Boot] [PATCH V3 3/3] imx: mx7: psci: add system power off support   Anson Huang
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings   Marek Vasut
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Anand Moon
• [U-Boot] [PATCH] rpi_0_w: Add configs consistent with RpI3   drew.moseley at northern.tech
• [U-Boot] [PATCH v6 01/11] wait_bit: add big endian version of wait_for_bit function   Jagan Teki
• [U-Boot] [PATCH v6 04/11] dm: spi: add BCM63xx SPI driver   Jagan Teki
• [U-Boot] [PATCH v6 05/11] mips: bmips: add bcm63xx-spi driver support for BCM6338   Jagan Teki
• [U-Boot] [PATCH v6 06/11] mips: bmips: add bcm63xx-spi driver support for BCM6348   Jagan Teki
• [U-Boot] [PATCH v6 07/11] mips: bmips: add bcm63xx-spi driver support for BCM6358   Jagan Teki
• [U-Boot] [PATCH v6 08/11] mips: bmips: add bcm63xx-spi driver support for BCM3380   Jagan Teki
• [U-Boot] [PATCH v6 09/11] mips: bmips: add bcm63xx-spi driver support for BCM63268   Jagan Teki
• [U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Jagan Teki
• [U-Boot] [PATCH v6 11/11] mips: bmips: enable the SPI flash on the Netgear CG3100D   Jagan Teki
• [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation   Clemens Gruber
• [U-Boot] [PATCH 1/1] efi_loader: allocate correct memory type for EFI image   Heinrich Schuchardt
• [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation   Tom Rini
• [U-Boot] "fdt" commands in extlinux.conf ?   Peter Robinson
• [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/   Bin Meng
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Bin Meng
• [U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC   Chris Packham
• [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table   Bin Meng
• [U-Boot] [PATCH 01/16] efi_selftest: colored test output   Simon Glass
• [U-Boot] [PATCH 02/16] efi_loader: simplify efi_remove_all_protocols   Simon Glass
• [U-Boot] [PATCH 03/16] efi_selftest: do not try to close device path protocol   Simon Glass
• [U-Boot] [PATCH 04/16] efi_loader: list of open protocol infos   Simon Glass
• [U-Boot] [PATCH 05/16] efi_loader: open_info in OpenProtocol   Simon Glass
• [U-Boot] [PATCH 06/16] efi_loader: open_info in CloseProtocol   Simon Glass
• [U-Boot] [PATCH 07/16] efi_loader: implement OpenProtocolInformation   Simon Glass
• [U-Boot] [PATCH 08/16] efi_loader: debug output installed device path   Simon Glass
• [U-Boot] [PATCH 09/16] efi_loader: implement ConnectController   Simon Glass
• [U-Boot] [PATCH 10/16] efi_loader: fix signature of efi_disconnect_controller   Simon Glass
• [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController   Simon Glass
• [U-Boot] [PATCH 12/16] efi_loader: disconnect controllers in UninstallProtocol   Simon Glass
• [U-Boot] [PATCH 13/16] efi_selftest: remove todo in manage protocols   Simon Glass
• [U-Boot] [PATCH 14/16] efi_selftest: remove todo in device path test   Simon Glass
• [U-Boot] [PATCH 15/16] efi_selftest: test for (Dis)ConnectController   Simon Glass
• [U-Boot] [PATCH 16/16] efi_loader: consistently use efi_handle_t for handles   Simon Glass
• [U-Boot] [PATCH 2/4] ARM: tegra: remove SPL config for non-SPL SoCs   Simon Glass
• [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer   Simon Glass
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jason Rush
• [U-Boot] [PATCH 4/4] ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSET   Simon Glass
• [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing   Simon Glass
• [U-Boot] [PATCH v10 23/27] board_r: initialize spi_nor   Simon Glass
• [U-Boot] [PATCH 1/9] fit: Fix CONFIG_FIT_SPL_PRINT   Simon Glass
• [U-Boot] [PATCH 2/9] fit: Add empty fit_print_contents() and fit_image_print()   Simon Glass
• [U-Boot] [PATCH 3/9] fit: Add standalone image type handling   Simon Glass
• [U-Boot] [PATCH 4/9] fit: Verify all configuration signatures   Simon Glass
• [U-Boot] [PATCH 5/9] spl: Add full fitImage support   Simon Glass
• [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation   Sumit Garg
• [U-Boot] [PATCH 6/9] spl: Add support for overlaying U-Boot DT   Simon Glass
• [U-Boot] [PATCH 8/9] spl: ram: Add support for fetching image position from control DT   Simon Glass
• [U-Boot] [PATCH 9/9] spl: spi: Add support for fetching image position from control DT   Simon Glass
• [U-Boot] [PATCH 1/8] dm: add dev_read_u32()   Simon Glass
• [U-Boot] [PATCH 0/8] mmc: some fixes for core and add HS200 support for sdhci-cadence   Simon Glass
• [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c   Simon Glass
• [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER   Simon Glass
• [U-Boot] [PATCH] GPIO: pca953x: Rework to not include commands in SPL   Simon Glass
• [U-Boot] [PATCH 00/11] Introduce variables whitelisting in environment   Simon Glass
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Simon Glass
• [U-Boot] [PATCH 1/3] ARM: Tegra186: mem parsing fixes from downstream   Simon Glass
• [U-Boot] [PATCH 2/3] ARM: Tegra186: search for best RAM bank   Simon Glass
• [U-Boot] [PATCH 3/3] ARM: tegra: p2771-000: increase max DRAM bank count   Simon Glass
• [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers   Simon Glass
• [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table   Simon Glass
• [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param   Simon Glass
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Simon Glass
• [U-Boot] [PATCH] config_whitelist: remove false-positive CONFIG options   Simon Glass
• [U-Boot] [PATCH] ARM: bootm: don't assume sp is in DRAM bank 0   Simon Glass
• [U-Boot] [PATCH 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM   Simon Glass
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Vignesh R
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Jaehoon Chung
• [U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard   Priyanka Jain
• [U-Boot] "fdt" commands in extlinux.conf ?   Ken Harris
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Anand Moon
• [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig   Ken Harris
• [U-Boot] [PATCH] board/ls2081ardb: Update board related prints   Priyanka Jain
• [U-Boot] [PATCH v6 0/2] Generic firmware loader   Lothar Waßmann
• [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez
• [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware   Jorge Ramirez
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH 6/6] sunxi: Add initial Banana-Pi Zero support   Maxime Ripard
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c   Emmanuel Vadot
• [U-Boot] "Reset" values for clksel_con registers in clk_rk3399.c:rkclk_init()   Kever Yang
• [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot   Emmanuel Vadot
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Lukasz Majewski
• [U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Vignesh R
• [U-Boot] [PATCH 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"   Vignesh R
• [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned   Vignesh R
• [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().   Heinrich Schuchardt
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Fabio Estevam
• [U-Boot] [PATCH v3] mx6ull: Handle the CONFIG_MX6ULL cases correctly   Stefano Babic
• [U-Boot] [BUG] x86: incorrect dram definition in dram_init_banksize().   Alexander Graf
• [U-Boot] [PATCH 0/4] serial: ns16550: cleanups and 13x oversampling   Matthijs van Duin
• [U-Boot] [PATCH 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Matthijs van Duin
• [U-Boot] [PATCH 2/4] serial: ns16550: centralize identification of uart variants   Matthijs van Duin
• [U-Boot] [PATCH 3/4] serial: ns16550: add definitions for register mdr1   Matthijs van Duin
• [U-Boot] [PATCH 4/4] serial: ns16550: use 13x oversampling when available   Matthijs van Duin
• [U-Boot] Making lack-of DM conversion noisy warning   Tom Rini
• [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support   Dr. Philipp Tomsich
• [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option   Michal Simek
• [U-Boot] [PATCH v3] crypto/fsl: fix BLOB encapsulation and decapsulation   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option   Masahiro Yamada
• [U-Boot] Making lack-of DM conversion noisy warning   Simon Glass
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer   Bryan O'Donoghue
• [U-Boot] [PATCH v5 01/24] arm: imx: hab: Make authenticate_image return int   Bryan O'Donoghue
• [U-Boot] [PATCH v5 02/24] arm: imx: hab: Fix authenticate_image result code   Bryan O'Donoghue
• [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail   Bryan O'Donoghue
• [U-Boot] [PATCH v5 04/24] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail   Bryan O'Donoghue
• [U-Boot] [PATCH v5 05/24] arm: imx: hab: Move IVT_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v5 06/24] arm: imx: hab: Move CSF_PAD_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v5 07/24] arm: imx: hab: Fix authenticate_image input parameters   Bryan O'Donoghue
• [U-Boot] [PATCH v5 08/24] arm: imx: hab: Add IVT header definitions   Bryan O'Donoghue
• [U-Boot] [PATCH v5 09/24] arm: imx: hab: Add IVT header verification   Bryan O'Donoghue
• [U-Boot] [PATCH v5 10/24] arm: imx: hab: Verify IVT self matches calculated address   Bryan O'Donoghue
• [U-Boot] [PATCH v5 11/24] arm: imx: hab: Only call ROM once headers are verified   Bryan O'Donoghue
• [U-Boot] [PATCH v5 12/24] arm: imx: hab: Print CSF based on IVT descriptor   Bryan O'Donoghue
• [U-Boot] [PATCH v5 13/24] arm: imx: hab: Print additional IVT elements during debug   Bryan O'Donoghue
• [U-Boot] [PATCH v5 14/24] arm: imx: hab: Define rvt_check_target()   Bryan O'Donoghue
• [U-Boot] [PATCH v5 15/24] arm: imx: hab: Implement hab_rvt_check_target   Bryan O'Donoghue
• [U-Boot] [PATCH v5 16/24] arm: imx: hab: Add a hab_rvt_check_target to image auth   Bryan O'Donoghue
• [U-Boot] [PATCH v5 17/24] arm: imx: hab: Print HAB event log only after calling ROM   Bryan O'Donoghue
• [U-Boot] [PATCH v5 18/24] arm: imx: hab: Make internal functions and data static   Bryan O'Donoghue
• [U-Boot] [PATCH v5 19/24] arm: imx: hab: Prefix authenticate_image with imx_hab   Bryan O'Donoghue
• [U-Boot] [PATCH v5 20/24] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled   Bryan O'Donoghue
• [U-Boot] [PATCH v5 21/24] arm: imx: hab: Make imx_hab_is_enabled global   Bryan O'Donoghue
• [U-Boot] [PATCH v5 22/24] arm: imx: hab: Define rvt_failsafe()   Bryan O'Donoghue
• [U-Boot] [PATCH v5 23/24] arm: imx: hab: Implement hab_rvt_failsafe   Bryan O'Donoghue
• [U-Boot] [PATCH v5 24/24] arm: imx: hab: Add hab_failsafe console command   Bryan O'Donoghue
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   York Sun
• [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig   York Sun
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2 06/13] drivers: usb: dwc3: add ti dwc3 peripheral driver with driver model support   Vignesh R
• [U-Boot] [PATCH] freescale: vid: add support LTC3882 and rework of the VID support   York Sun
• [U-Boot] [PATCH 2/2] ARM: tegra: use LINUX_KERNEL_IMAGE_HEADER   Stephen Warren
• [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR   York Sun
• [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer   Stephen Warren
• [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII   York Sun
• [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support   York Sun
• [U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   Sumit Garg
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Heinrich Schuchardt
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH 1/2] cmd: go: Make do_go available to outside boot.c   Simon Glass
• [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer   Simon Glass
• [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing   Simon Glass
• [U-Boot] [PATCH 2/2] sysboot: Call bootm booti bootz then go on label_boot   Simon Glass
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Simon Glass
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Jaehoon Chung
• [U-Boot] [PATCH 11/16] efi_loader: implement DisconnectController   Heinrich Schuchardt
• [U-Boot] [PATCH 16/16] efi_loader: consistently use efi_handle_t for handles   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] ARM: Tegra186: calculate load addresses at boot   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: Tegra: p2771-0000: use calculcate env var feature   Stephen Warren
• [U-Boot] [ANN] U-Boot v2018.01 is released   Tom Rini
• [U-Boot] u-boot/next and HS MMC patches   Tom Rini
• [U-Boot] [PATCH 1/1] configs: x86: allow to override CONFIG_BOOTCOMMAND   Bin Meng
• [U-Boot] [PATCH v2] x86: Move commands from under arch/x86 to cmd/x86/   Bin Meng
• [U-Boot] [PATCH v1 1/2] x86: tangier: Use actual GPIO hardware numbers   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: tangier: Add Bluetooth to ACPI table   Bin Meng
• [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig   Peter Robinson
• [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed   Peter Robinson
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Peter Robinson
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Peter Robinson
• [U-Boot] u-boot/next and HS MMC patches   Jaehoon Chung
• [U-Boot] [PATCH v6 0/2] Generic firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH v2 01/12] riscv: cpu: Add nx25 to support RISC-V   陳建志
• [U-Boot] [PATCH 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Goldschmidt Simon
• [U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure   Vinitha Pillai-B57223
• [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned   Goldschmidt Simon
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Anand Moon
• [U-Boot] [PATCH] arm: zynq: Remove ZC770_ config option   Michal Simek
• [U-Boot] [PATCH] ARM: zynq: remove unused CONFIG_ZC770_XM01* options   Michal Simek
• [U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed   Jaehoon Chung
• [U-Boot] [PATCH 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock   Hannes Schmelzer
• [U-Boot] [PATCH 1/6] mach-omap2: add AM335x Display PLL register definition   Hannes Schmelzer
• [U-Boot] [PATCH 2/6] am335x-fb: cosmetic: update-copyright   Hannes Schmelzer
• [U-Boot] [PATCH 3/6] am335x-fb: cosmetic: fix coding style   Hannes Schmelzer
• [U-Boot] [PATCH 4/6] am335x-fb: setup display PLL   Hannes Schmelzer
• [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider   Hannes Schmelzer
• [U-Boot] [PATCH 6/6] board/BuR: drop LCDC clock manipulation from board code   Hannes Schmelzer
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez
• [U-Boot] [PATCH 1/6] mach-omap2: add AM335x Display PLL register definition   Anatolij Gustschin
• [U-Boot] [PATCH 2/6] am335x-fb: cosmetic: update-copyright   Anatolij Gustschin
• [U-Boot] [PATCH 3/6] am335x-fb: cosmetic: fix coding style   Anatolij Gustschin
• [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed   Jorge Ramirez
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Peter Robinson
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez
• [U-Boot] [PATCH v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider   Anatolij Gustschin
• [U-Boot] [PATCH 6/6] board/BuR: drop LCDC clock manipulation from board code   Anatolij Gustschin
• [U-Boot] [PATCH 5/6] board/BuR: provide real clock-frequency instead a divider   Hannes Schmelzer
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez
• [U-Boot] [PATCH 01/03] spmi: msm: display the PMIC Arb version (debug)   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/03] poplar: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/03] dm: core: parse chosen node   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 01/05] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/05] arm: mach-snapdragon: refactor clock driver   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 04/05] db820c: enable pmic gpios for pm8994   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 05/05] db820c: stop autoboot when vol- pressed   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 01/07] db410c: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 02/07] db410c: update wlan and bt mac addresses from firmware   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 05/07] db410c: use the device tree parsed by the lk loader.   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 06/07] db410c: add reserved-memory node to dts   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Peter Robinson
• [U-Boot] [PATCH 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez
• [U-Boot] [PATCH 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned   Vignesh R
• [U-Boot] [PATCH 1/7] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c   Masahiro Yamada
• [U-Boot] [PATCH 2/7] libfdt: fix <linux/libfdt.h>   Masahiro Yamada
• [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly   Masahiro Yamada
• [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h   Masahiro Yamada
• [U-Boot] [PATCH 5/7] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h   Masahiro Yamada
• [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper   Masahiro Yamada
• [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper   Masahiro Yamada
• [U-Boot] sdhci - review?   Jorge Ramirez
• [U-Boot] sdhci - review?   Jorge Ramirez
• [U-Boot] Modify DTB after loading fitimage   Peter Fink
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Diaz de Grenu, Jose
• [U-Boot] [PATCH] armv8: zynqmp: Map PCIe High as device memory   Michal Simek
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH V3 01/31] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH V3 02/31] imx: mx8m: add register definition header file   Peng Fan
• [U-Boot] [PATCH V3 03/31] imx: mx8m: add pin header file   Peng Fan
• [U-Boot] [PATCH V3 04/31] time: add wait_mask_set/clr_timeout helper functions   Peng Fan
• [U-Boot] [PATCH V3 05/31] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH V3 06/31] imx: add sip function   Peng Fan
• [U-Boot] [PATCH V3 07/31] imx: boot_mode: add USB_BOOT entry   Peng Fan
• [U-Boot] [PATCH V3 08/31] imx: cpu: update cpu file to support i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 09/31] imx: spl: implement spl_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper   Peng Fan
• [U-Boot] [PATCH V3 11/31] imx: add pad settings bit definition for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 12/31] imx: cpu: move speed/temp to common cpu   Peng Fan
• [U-Boot] [PATCH V3 13/31] imx: cpu: add cpu speed/grade for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 14/31] imx: refactor imx_get_mac_from_fuse   Peng Fan
• [U-Boot] [PATCH V3 15/31] imx: cleanup bootaux   Peng Fan
• [U-Boot] [PATCH V3 16/31] imx: bootaux: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 17/31] imx: mx7: move get_boot_device to cpu.c   Peng Fan
• [U-Boot] [PATCH V3 18/31] imx: cpu: support get_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 19/31] imx: mx7: move mmc env code to mmc_env.c   Peng Fan
• [U-Boot] [PATCH V3 20/31] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH V3 21/31] imx: makefile: compile files for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 22/31] misc: ocotp: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V3 23/31] mmc: fsl_esdhc: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 24/31] imx: lcdif: include i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 25/31] gpio: mxc: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V3 26/31] net: fec: do not access reserved register for i.MX8M   Peng Fan
• [U-Boot] [PATCH V3 27/31] net: fec: fix build warnings for 64bits support   Peng Fan
• [U-Boot] [PATCH V3 28/31] imx: imx8mq: add dtsi file   Peng Fan
• [U-Boot] [PATCH V3 29/31] power: pmic/regulator allow dm be omitted by SPL   Peng Fan
• [U-Boot] [PATCH V3 30/31] imx: mx8m: add ddr controller memory map   Peng Fan
• [U-Boot] [PATCH V3 31/31] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH 0/3] ARM: uniphier: updates for v2017.03 MW   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH v2 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Vignesh R
• [U-Boot] [PATCH v2 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"   Vignesh R
• [U-Boot] [PATCH v2 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned   Vignesh R
• [U-Boot] [PATCH v2 01/12] riscv: cpu: Add nx25 to support RISC-V   Tom Rini
• [U-Boot] [GIT] Pull request: u-boot-dfu (09.01.2018)   Lukasz Majewski
• [U-Boot] [PATCH 0/4] ARM: Extend qemu_arm to support ARM64   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/4] ARM: qemu-arm: Add support for AArch64   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm   Tuomas Tynkkynen
• [U-Boot] [PATCH 3/4] Travis-CI: Download ARM64 version of GRUB as well   Tuomas Tynkkynen
• [U-Boot] [PATCH 4/4] Travis-CI: Add job for running test.py on qemu_arm64   Tuomas Tynkkynen
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Lokesh Vutla
• [U-Boot] [PATCH v2 03/16] efi: Add error checking for efi_init_obj_list()   Heinrich Schuchardt
• [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment   Stefan Roese
• [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment   Kostya Porotchkin
• [U-Boot] [PATCH v2 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock   Hannes Schmelzer
• [U-Boot] [PATCH v2 1/6] mach-omap2: add AM335x Display PLL register definition   Hannes Schmelzer
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Hannes Schmelzer
• [U-Boot] [PATCH v2 3/6] am335x-fb: cosmetic: fix coding style   Hannes Schmelzer
• [U-Boot] [PATCH v2 4/6] am335x-fb: setup display PLL   Hannes Schmelzer
• [U-Boot] [PATCH v2 5/6] board/BuR: provide real clock-frequency instead a divider   Hannes Schmelzer
• [U-Boot] [PATCH v2 6/6] board/BuR: drop LCDC clock manipulation from board code   Hannes Schmelzer
• [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer   Breno Matheus Lima
• [U-Boot] [PATCH v2 08/16] sandbox: Add a setjmp() implementation   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Tom Rini
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Tom Rini
• [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support   Bhaskar Upadhaya
• [U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support   York Sun
• [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII   Bhaskar Upadhaya
• [U-Boot] [PATCH 1/4] ARM: qemu-arm: Add support for AArch64   Tom Rini
• [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm   Tom Rini
• [U-Boot] [PATCH 3/4] Travis-CI: Download ARM64 version of GRUB as well   Tom Rini
• [U-Boot] [PATCH 4/4] Travis-CI: Add job for running test.py on qemu_arm64   Tom Rini
• [U-Boot] [EXT] [PATCH] arm64: mvebu: armada-8k: support SD card environment   Baruch Siach
• [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly   Joe Hershberger
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Fabio Estevam
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support   Sumit Garg
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Hannes Schmelzer
• [U-Boot] [PATCH 3/3] drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII   York Sun
• [U-Boot] [PATCH 1/1] ls1012a:dts: Update LS1012A-2G5RDB device tree   York Sun
• [U-Boot] [PULL] Please pull from u-boot-rockchip/master   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Tom Rini
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Hannes Schmelzer
• [U-Boot] [PATCH v2 2/6] am335x-fb: cosmetic: update-copyright   Tom Rini
• [U-Boot] [PATCH v3 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock   Hannes Schmelzer
• [U-Boot] [PATCH v3 1/6] mach-omap2: add AM335x Display PLL register definition   Hannes Schmelzer
• [U-Boot] [PATCH v3 2/6] am335x-fb: cosmetic: update-copyright   Hannes Schmelzer
• [U-Boot] [PATCH v3 3/6] am335x-fb: cosmetic: fix coding style   Hannes Schmelzer
• [U-Boot] [PATCH v3 4/6] am335x-fb: setup display PLL   Hannes Schmelzer
• [U-Boot] [PATCH v3 5/6] board/BuR: provide real clock-frequency instead a divider   Hannes Schmelzer
• [U-Boot] [PATCH v3 6/6] board/BuR: drop LCDC clock manipulation from board code   Hannes Schmelzer
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH 1/3] configs: enable spl support wrt env device   Jagan Teki
• [U-Boot] [PATCH 2/3] configs: icore: enable nand on mmc defconfig   Jagan Teki
• [U-Boot] [PATCH 3/3] i.MX: nand: add nandbcb update command   Jagan Teki
• [U-Boot] [PULL] Please pull from u-boot-rockchip/master   Tom Rini
• [U-Boot] [PATCH v1 6/6] dts: dra7x: enable host on USB2 for all the platforms of the DRA7 family   Tom Rini
• [U-Boot] [PATCH v1 1/6] board: ti: dra7xx-evm: turn on USB clocks in late init stage   Tom Rini
• [U-Boot] [PATCH v1 5/6] configs: enable DM_USB for all the platforms of the DRA7 family   Tom Rini
• [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack   Stephen Warren
• [U-Boot] [PATCH 3/4] ARMv8: Allow dynamic early stack pointer   Stephen Warren
• [U-Boot] ext4: cache first extent index blocks (#06343)   Tom Rini
• [U-Boot] [PATCH] arm: am33xx: security: Fix size calculation on header   Andrew F. Davis
• [U-Boot] [PATCH] arm: mach-omap2: Remove secure certificate name printing   Andrew F. Davis
• [U-Boot] api: bootelf: go: flush cache before starting   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 2/2] ARM: imx: cm_fx6: env: try to determine dtb to use   christopher.spinrath at rwth-aachen.de
• [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env   Fabio Estevam
• [U-Boot] [PATCH 3/3] i.MX: nand: add nandbcb update command   Fabio Estevam
• [U-Boot] [PATCH v5 00/24] Fix and extend i.MX HAB layer   Fabio Estevam
• [U-Boot] [PATCH 2/4] ARM: Document AArch64 version of qemu-arm   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 06/16] efi: sandbox: Adjust memory usage for sandbox   Heinrich Schuchardt
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH v3 0/6] assert() is almost used in the same way as BUG_ON(), except:   Masahiro Yamada
• [U-Boot] [PATCH v3 1/6] Enable CONFIG_PANIC_HANG for boards without do_reset()   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Masahiro Yamada
• [U-Boot] [PATCH v3 3/6] Introduce CONFIG_BUG_CHECKS to allow to disable BUG{_ON} and WARN_ON   Masahiro Yamada
• [U-Boot] [PATCH v3 4/6] ARM: openrd: disable CONFIG_BUG_CHECKS   Masahiro Yamada
• [U-Boot] [PATCH v3 5/6] treewide: convert assert() to BUG_ON()   Masahiro Yamada
• [U-Boot] [PATCH v3 6/6] Remove assert()   Masahiro Yamada
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Fabio Estevam
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Fabio Estevam
• [U-Boot] [PATCH 03/07] db410c: replace reset driver with psci   Tuomas Tynkkynen
• [U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH v4 1/7] driver/ddr: Add support for setting timing in hws_topology_map   Chris Packham
• [U-Boot] [PATCH V4 00/32] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH V4 01/32] arm: imx: Rework i.MX specific commands to be excluded from SPL   Peng Fan
• [U-Boot] [PATCH V4 02/32] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH V4 03/32] imx: mx8m: add register definition header file   Peng Fan
• [U-Boot] [PATCH V4 04/32] imx: mx8m: add pin header file   Peng Fan
• [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions   Peng Fan
• [U-Boot] [PATCH V4 06/32] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH V4 07/32] imx: add sip function   Peng Fan
• [U-Boot] [PATCH V4 08/32] imx: boot_mode: add USB_BOOT entry   Peng Fan
• [U-Boot] [PATCH V4 09/32] imx: cpu: update cpu file to support i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 10/32] imx: spl: implement spl_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 11/32] imx: add i.MX8MQ SoC Revision and is_mx8m helper   Peng Fan
• [U-Boot] [PATCH V4 12/32] imx: add pad settings bit definition for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 13/32] imx: cpu: move speed/temp to common cpu   Peng Fan
• [U-Boot] [PATCH V4 14/32] imx: cpu: add cpu speed/grade for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 15/32] imx: refactor imx_get_mac_from_fuse   Peng Fan
• [U-Boot] [PATCH V4 16/32] imx: cleanup bootaux   Peng Fan
• [U-Boot] [PATCH V4 17/32] imx: bootaux: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 18/32] imx: mx7: move get_boot_device to cpu.c   Peng Fan
• [U-Boot] [PATCH V4 19/32] imx: cpu: support get_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 20/32] imx: mx7: move mmc env code to mmc_env.c   Peng Fan
• [U-Boot] [PATCH V4 21/32] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH V4 22/32] imx: makefile: compile files for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 23/32] misc: ocotp: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V4 24/32] mmc: fsl_esdhc: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 25/32] imx: lcdif: include i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 26/32] gpio: mxc: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V4 27/32] net: fec: do not access reserved register for i.MX8M   Peng Fan
• [U-Boot] [PATCH V4 28/32] net: fec: fix build warnings for 64bits support   Peng Fan
• [U-Boot] [PATCH V4 29/32] imx: imx8mq: add dtsi file   Peng Fan
• [U-Boot] [PATCH V4 30/32] power: pmic/regulator allow dm be omitted by SPL   Peng Fan
• [U-Boot] [PATCH V4 31/32] imx: mx8m: add ddr controller memory map   Peng Fan
• [U-Boot] [PATCH V4 32/32] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions   Masahiro Yamada
• [U-Boot] [GIT PULL] ZFS: lundman/master   Jorgen Lundman
• [U-Boot] [PATCH] ddr: marvell: only assert M_ODT[0] on write for a single CS   Chris Packham
• [U-Boot] [PATCH V4 05/32] time: add wait_mask_set/clr_timeout helper functions   Peng Fan
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH V5 01/31] arm: imx: Rework i.MX specific commands to be excluded from SPL   Peng Fan
• [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig   Peng Fan
• [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file   Peng Fan
• [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin header file   Peng Fan
• [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH V5 06/31] imx: add sip function   Peng Fan
• [U-Boot] [PATCH V5 07/31] imx: boot_mode: add USB_BOOT entry   Peng Fan
• [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper   Peng Fan
• [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu   Peng Fan
• [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse   Peng Fan
• [U-Boot] [PATCH V5 15/31] imx: cleanup bootaux   Peng Fan
• [U-Boot] [PATCH V5 16/31] imx: bootaux: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c   Peng Fan
• [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 19/31] imx: mx7: move mmc env code to mmc_env.c   Peng Fan
• [U-Boot] [PATCH V5 20/31] imx: mx8m: add soc related settings and files   Peng Fan
• [U-Boot] [PATCH V5 21/31] imx: makefile: compile files for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 22/31] misc: ocotp: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V5 23/31] mmc: fsl_esdhc: support i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 24/31] imx: lcdif: include i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support   Peng Fan
• [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M   Peng Fan
• [U-Boot] [PATCH V5 27/31] net: fec: fix build warnings for 64bits support   Peng Fan
• [U-Boot] [PATCH V5 28/31] imx: imx8mq: add dtsi file   Peng Fan
• [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL   Peng Fan
• [U-Boot] [PATCH V5 30/31] imx: mx8m: add ddr controller memory map   Peng Fan
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH] sunxi: maintainers: Add myself for the TBS A711   Jagan Teki
• [U-Boot] [PATCH] ARM: sunxi: Remove left-over cd-inverted property from pcDuino3   Jagan Teki
• [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree   Jagan Teki
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 02/11] cmd: unzip: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 03/11] cmd: loadb: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 04/11] cmd: loads: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 05/11] cmd: misc: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 06/11] video: bpp8: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 07/11] video: bpp16: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH 08/11] net: regex: Disable by default on sunXi   Jagan Teki
• [U-Boot] [PATCH] serial: lpuart: Proper device identification   Sriram Dash
• [U-Boot] [PATCH 09/11] sunxi: imply CONFIG_OF_LIBFDT_OVERLAY   Jagan Teki
• [U-Boot] RFE : CONFIG_OF_LIBFDT_OVERLAY=y in configs/orangepi_one_defconfig   Jagan Teki
• [U-Boot] [PATCH] doc: bindings: soft-spi: update documentation to match the code   Jagan Teki
• [U-Boot] [PATCH] spl: make CONFIG_OF_EMBED pass dts through fdtgrep   Goldschmidt Simon
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Goldschmidt Simon
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Lokesh Vutla
• [U-Boot] [PATCH] arm: am33xx: security: Fix size calculation on header   Lokesh Vutla
• [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3   Sriram Dash
• [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree   Marek Vasut
• [U-Boot] [PATCH v1 01/03] spmi: msm: display the PMIC Arb version (debug)   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 02/03] poplar: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 03/03] dm: core: parse chosen node   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 01/05] env: enable accessing the environment in an EXT4 partition   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 02/05] arm: mach-snapdragon: refactor clock driver   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 04/05] db820c: enable pmic gpios for pm8994   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 05/05] db820c: stop autoboot when vol- pressed   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 01/07] db410c: configs: increase gunzip buffer size for the kernel   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 02/07] db410c: update wlan and bt mac addresses from firmware   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 03/07] db410c: replace reset driver with psci   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 05/07] db410c: use the device tree parsed by the lk loader.   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 06/07] db410c: add reserved-memory node to dts   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH v1 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory   Jorge Ramirez-Ortiz
• [U-Boot] [PATCH] configs: am57xx_evm: fix ethernet phy configuration   Lokesh Vutla
• [U-Boot] [PATCH] tools: Add Marvell recovery image download script   Stefan Roese
• [U-Boot] [PATCH 1/4] arm64: a37xx: use disto defaults   Stefan Roese
• [U-Boot] [PATCH 2/4] arm64: a37xx: add distro compatible env vars   Stefan Roese
• [U-Boot] [PATCH 3/4] arm64: a37xx: defconfigs: enable CONFIG_DISTRO_DEFAULTS   Stefan Roese
• [U-Boot] [PATCH 4/4] arm64: a37xx: use distro bootcmd   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: ClearFog: document boot selection switches, update UART   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: Allow MVNETA to be selected with Armada 3700 SoCs   Stefan Roese
• [U-Boot] [PATCH] pinctrl: mvebu: Make drivers depend on the pinctrl framework   Stefan Roese
• [U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH v3 1/6] mach-omap2: add AM335x Display PLL register definition   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/6] am335x-fb: cosmetic: update-copyright   Anatolij Gustschin
• [U-Boot] BugFix: PXE Boot fails on old arm kernel with initrd without FDT   Tom Rini
• [U-Boot] [PATCH v3 3/6] am335x-fb: cosmetic: fix coding style   Anatolij Gustschin
• [U-Boot] [PATCH v3 4/6] am335x-fb: setup display PLL   Anatolij Gustschin
• [U-Boot] [PATCH v3 5/6] board/BuR: provide real clock-frequency instead a divider   Anatolij Gustschin
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH v3 6/6] board/BuR: drop LCDC clock manipulation from board code   Anatolij Gustschin
• [U-Boot] [GIT PULL] ZFS: lundman/master   Tom Rini
• [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree   Jun Nie
• [U-Boot] [PATCH v2] musb: sunxi: Use base address from device tree   Chen-Yu Tsai
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Goldschmidt Simon
• [U-Boot] [PATCH 09/13] board: ti: am574x-idk: Add ddr data support   Tom Rini
• [U-Boot] [PATCH 1/8] arm: zynq: Add identification string to Xilinx boards   Michal Simek
• [U-Boot] [PATCH 2/8] arm: zynq: Enable debug console for zc770 xm011   Michal Simek
• [U-Boot] [PATCH 3/8] arm: zynq: Disable networking for zc770 xm011   Michal Simek
• [U-Boot] [PATCH 4/8] arm: zynq: Enable BLK when needed   Michal Simek
• [U-Boot] [PATCH 5/8] arm: zynq: Enable DM_ETH and DM_MMC only if subsystem is enabled   Michal Simek
• [U-Boot] [PATCH 6/8] arm: zynq: Enable DM_GPIO when needed   Michal Simek
• [U-Boot] [PATCH 7/8] arm: zynq: Move bootcommand to defconfig   Michal Simek
• [U-Boot] [PATCH 8/8] arm: zynq: Enable distro defaults setting   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Fix pmu register description coding style   Michal Simek
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Goldschmidt Simon
• [U-Boot] [PATCH 1/2] arm64: zynqmp: Remove whitespaces in psu_init() comment   Michal Simek
• [U-Boot] [PATCH 2/2] arm64: zynqmp: Propagate error value from psu_init()   Michal Simek
• [U-Boot] [PATCH 1/2] arm64: zynqmp: Prepare psu_init rework   Michal Simek
• [U-Boot] [PATCH 2/2] arm64: zynqmp: Add psu_init for zcu102-rev1.0   Michal Simek
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Marek Vasut
• [U-Boot] compilation issue pine64   Akash Gajjar
• [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning   Andy Shevchenko
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [U-Boot, 2/2] arm: Exercise v7_arch_cp15_set_acr even without errata fixups   Tom Rini
• [U-Boot] [U-Boot, RESEND, 01/14] ARM: DTS: stm32: add STM32F429 SoC and its Discovery board support   Tom Rini
• [U-Boot] [U-Boot, RESEND, 02/14] ARM: DTS: stm32: add stm32f429-disco-u-boot dts file   Tom Rini
• [U-Boot] [U-Boot, RESEND, 03/14] board: stm32f429-discovery: switch to DM STM32 sdram driver   Tom Rini
• [U-Boot] [U-Boot, RESEND, 04/14] pinctrl: stm32: add stm32f4 pinctrl compatible strings   Tom Rini
• [U-Boot] [U-Boot, RESEND, 05/14] configs: stm32f429-disco: enable MISC, STM32_RCC, DM_RESET and STM32_RESET   Tom Rini
• [U-Boot] [U-Boot, RESEND, 06/14] board: stm32f429-disco: switch to DM STM32 serial driver   Tom Rini
• [U-Boot] [U-Boot, RESEND, 07/14] mach-stm32: stmf32f4: timer: remove clock_get() call   Tom Rini
• [U-Boot] [U-Boot, RESEND, 08/14] board: stm32f429-disco: switch to DM STM32 clock driver   Tom Rini
• [U-Boot] [U-Boot, RESEND, 09/14] board: stm32f429-disco: switch to DM STM32 pinctrl and gpio driver   Tom Rini
• [U-Boot] [U-Boot, RESEND, 10/14] ram: stm32: add memory mapping selection support   Tom Rini
• [U-Boot] [U-Boot, RESEND, 11/14] ARM: DTS: add STM32F469 Discovery board support   Tom Rini
• [U-Boot] [U-Boot, RESEND, 12/14] ARM: DTS: stm32: add stm32f469-disco-u-boot dts file   Tom Rini
• [U-Boot] [U-Boot, RESEND, 13/14] board: stm32: add stm32f469-discovery board support   Tom Rini
• [U-Boot] [U-Boot, RESEND, 14/14] ARM: DTS: stm32: add SDIO controller support for stm32f469-disco   Tom Rini
• [U-Boot] [U-Boot, RESEND, 1/2] ARM: DTS: stm32: add MMC nodes for stm32f746-disco and stm32f769-disco   Tom Rini
• [U-Boot] [U-Boot, RESEND, 2/2] configs: stm32f746-disco: enable MMC related flags   Tom Rini
• [U-Boot] BCM283x ALT5 function for JTAG pins   Tom Rini
• [U-Boot] PCI: Drop CONFIG_TSI108_PCI   Tom Rini
• [U-Boot] Travis-CI: Split 't208xrdb t4qds t102*'-job into separate jobs   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: Drop unreferenced CONFIG_MACH_* defines   Tom Rini
• [U-Boot] [U-Boot,2/2] sh: Drop unreferenced CONFIG_* defines   Tom Rini
• [U-Boot] linux/kernel.h: Add ALIGN_DOWN macro   Tom Rini
• [U-Boot] fat write: Fixed a problem with the case of file names when writing files   Tom Rini
• [U-Boot] [U-Boot, 2/3] build: Drop CONFIG_SPL_BUILD guards in some cases   Tom Rini
• [U-Boot] configs: am57xx_evm: fix ethernet phy configuration   Tom Rini
• [U-Boot] [PATCH v4 1/1] vsprintf.c: add EFI device path printing   Heinrich Schuchardt
• [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()   Andy Shevchenko
• [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check   Andy Shevchenko
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Andy Shevchenko
• [U-Boot] [PATCHv2 00/15] Updates / improvements to bx50v3 support   Sebastian Reichel
• [U-Boot] [PATCHv2 01/15] net: e1000: add support for writing to EEPROM   Sebastian Reichel
• [U-Boot] [PATCHv2 02/15] net: e1000: split e1000_read_mac_addr   Sebastian Reichel
• [U-Boot] [PATCHv2 03/15] net: e1000: implement eth_write_hwaddr   Sebastian Reichel
• [U-Boot] [PATCHv2 04/15] rtc: adding RX8010SJ rtc driver   Sebastian Reichel
• [U-Boot] [PATCHv2 05/15] board: ge: Enable access to i2c bus 1 and 2   Sebastian Reichel
• [U-Boot] [PATCHv2 06/15] configs: Add network device support for bx50v3 products   Sebastian Reichel
• [U-Boot] [PATCHv2 07/15] board: ge: bx50v3: move FEC MAC address programming to driver   Sebastian Reichel
• [U-Boot] [PATCHv2 08/15] board: ge: bx50v3: program MAC address to I210   Sebastian Reichel
• [U-Boot] [PATCHv2 09/15] board: ge: bx50v3: Enable hardware watchdog   Sebastian Reichel
• [U-Boot] [PATCHv2 10/15] board: ge: bx50v3: Support FIT and select configuration based on VPD   Sebastian Reichel
• [U-Boot] [PATCHv2 11/15] config: ge_bx50v3: read boot script   Sebastian Reichel
• [U-Boot] [PATCHv2 12/15] configs: ge_bx50v3: enable bootcount   Sebastian Reichel
• [U-Boot] [PATCHv2 13/15] board: ge: bx50v3: mount rootfs read-only   Sebastian Reichel
• [U-Boot] [PATCHv2 14/15] configs: ge_bx50v3: automatic partition selection and video output failure message   Sebastian Reichel
• [U-Boot] [PATCHv2 15/15] board,ge,bx50v3 - rtc time validation   Sebastian Reichel
• [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support   York Sun
• [U-Boot] [PATCH] Relax check for valid environment in __hconfig   Alexander Kabaev
• [U-Boot] [PATCH v2] Relax check for valid environment in __hwconfig   Alexander Kabaev
• [U-Boot] [PATCH v7 00/13] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 03/13] wait_bit: remove old wait_for_bit function   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 04/13] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 05/13] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 06/13] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 07/13] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 08/13] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 09/13] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 10/13] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 11/13] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 12/13] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v7 13/13] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH] Relax check for valid environment in __hwconfig   Alexander Kabaev
• [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack   Tom Warren
• [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack   Simon Glass
• [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack   Stephen Warren
• [U-Boot] [PATCH] Makefile: ensure DTB doesn't overflow into initial stack   Stephen Warren
• [U-Boot] [GIT PULL] ZFS: lundman/master   Jorgen Lundman
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit   Daniel Schwierzeck
• [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Daniel Schwierzeck
• [U-Boot] [PATCH v7 03/13] wait_bit: remove old wait_for_bit function   Daniel Schwierzeck
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (09.01.2018)   Marek Vasut
• [U-Boot] compilation issue pine64   Peter Robinson
• [U-Boot] [PATCH] TCP and wget implementation v5.1   Duncan Hare
• [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support   Sumit Garg
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] compilation issue pine64   Akash Gajjar
• [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2   Stefan Mavrodiev
• [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2   Jagan Teki
• [U-Boot] [PATCH v7 01/13] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Jagan Teki
• [U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit   Jagan Teki
• [U-Boot] [PATCH v3 00/16] efi_loader: implement driver management   Heinrich Schuchardt
• [U-Boot] [PATCH v3 01/16] efi_selftest: colored test output   Heinrich Schuchardt
• [U-Boot] [PATCH v3 02/16] efi_loader: simplify efi_remove_all_protocols   Heinrich Schuchardt
• [U-Boot] [PATCH v3 03/16] efi_selftest: do not try to close device path protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 04/16] efi_loader: list of open protocol infos   Heinrich Schuchardt
• [U-Boot] [PATCH v3 05/16] efi_loader: open_info in OpenProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/16] efi_loader: open_info in CloseProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 07/16] efi_loader: implement OpenProtocolInformation   Heinrich Schuchardt
• [U-Boot] [PATCH v3 08/16] efi_loader: debug output installed device path   Heinrich Schuchardt
• [U-Boot] [PATCH v3 09/16] efi_loader: implement ConnectController   Heinrich Schuchardt
• [U-Boot] [PATCH v3 10/16] efi_loader: fix signature of efi_disconnect_controller   Heinrich Schuchardt
• [U-Boot] [PATCH v3 11/16] efi_loader: implement DisconnectController   Heinrich Schuchardt
• [U-Boot] [PATCH v3 12/16] efi_loader: disconnect controllers in UninstallProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 13/16] efi_selftest: remove todo in manage protocols   Heinrich Schuchardt
• [U-Boot] [PATCH v3 14/16] efi_selftest: remove todo in device path test   Heinrich Schuchardt
• [U-Boot] [PATCH v3 15/16] efi_selftest: test for (Dis)ConnectController   Heinrich Schuchardt
• [U-Boot] [PATCH v3 16/16] efi_loader: consistently use efi_handle_t for handles   Heinrich Schuchardt
• [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode   Goldschmidt Simon
• [U-Boot] [PATCH 00/17] efi_loader: enable EFI driver provided block device   Heinrich Schuchardt
• [U-Boot] [PATCH 01/17] efi_loader: return NULL from device path functions   Heinrich Schuchardt
• [U-Boot] [PATCH 02/17] efi_loader: address of the simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 03/17] efi_loader: correct find simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 04/17] efi_loader: print device path when entering efi_load_image   Heinrich Schuchardt
• [U-Boot] [PATCH 05/17] efi_loader: allocate correct memory type for EFI image   Heinrich Schuchardt
• [U-Boot] [PATCH 06/17] efi_loader: check tables in helloworld.efi   Heinrich Schuchardt
• [U-Boot] [PATCH 07/17] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH 08/17] efi_loader: efi_disk_register: correctly determine if_type_name   Heinrich Schuchardt
• [U-Boot] [PATCH 09/17] efi_loader: make efi_block_io_guid a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH 10/17] efi_loader: provide a function to create a partition node   Heinrich Schuchardt
• [U-Boot] [PATCH 11/17] efi_loader: make efi_disk_create_partitions a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH 12/17] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions   Heinrich Schuchardt
• [U-Boot] [PATCH 13/17] efi_loader: provide function to get last node of a device path   Heinrich Schuchardt
• [U-Boot] [PATCH 14/17] efi_loader: provide links between devices EFI handles   Heinrich Schuchardt
• [U-Boot] [PATCH 15/17] tools: provide a tool to convert a binary file to an include   Heinrich Schuchardt
• [U-Boot] [PATCH 16/17] efi_selftest: provide a test for block io   Heinrich Schuchardt
• [U-Boot] [PATCH 17/17] efi_driver: EFI block driver   Heinrich Schuchardt
• [U-Boot] [PATCH] arm: socfpga: allow configs without network support   Simon Goldschmidt
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Lokesh Vutla
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Lukasz Majewski
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   Ashish Kumar
• [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig   Ashish Kumar
• [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR   Ashish Kumar
• [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: allow configs without network support   Marek Vasut
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Wolfgang Denk
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Diaz de Grenu, Jose
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Joakim Tjernlund
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Lukasz Majewski
• [U-Boot] U-Boot 2015 and u-boot-fw-utils 2017.09   Lukasz Majewski
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH v2 0/4] ARM: Extend qemu_arm to support ARM64   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 2/4] ARM: Document AArch64 version of qemu-arm   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 3/4] Travis-CI: Download ARM64 version of GRUB as well   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 4/4] Travis-CI: Add job for running test.py on qemu_arm64   Tuomas Tynkkynen
• [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL   Anatolij Gustschin
• [U-Boot] [PATCH V5] Convert CONFIG_SOC_DA8XX et al to Kconfig   Adam Ford
• [U-Boot] [PATCH v2 1/2] armv8/kconfig: Align boards of same family at one place   Bhaskar Upadhaya
• [U-Boot] [PATCH v2 2/2] board: ls1012a: LS1012A-2G5RDB board support   Bhaskar Upadhaya
• [U-Boot] [PATCH v3 0/6] am335x-fb: support display PLL for lcd-clock / pixel-clock   Anatolij Gustschin
• [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL   Fabio Estevam
• [U-Boot] [PATCH v2 2/4] ARM: Document AArch64 version of qemu-arm   Tom Rini
• [U-Boot] [PATCH 12/14] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Simon Glass
• [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Tom Rini
• [U-Boot] [GIT PULL] ZFS: lundman/master   Tom Rini
• [U-Boot] [PATCH] Relax check for valid environment in __hwconfig   Tom Rini
• [U-Boot] [PATCH v8 00/12] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 03/12] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 04/12] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 05/12] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Jagan Teki
• [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig   York Sun
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   York Sun
• [U-Boot] [PATCH v8 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH V5] Convert CONFIG_SOC_DA8XX et al to Kconfig   David Lechner
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Jagan Teki
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   David Lechner
• [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   David Lechner
• [U-Boot] [PATCH] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH V2] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail   Breno Matheus Lima
• [U-Boot] [PATCH] armv8: ls1088 : MC alignment should always be fixed to 512MB   York Sun
• [U-Boot] [PATCH v2] armv8: layerscape: sata: refine port register configuration   York Sun
• [U-Boot] [PATCH v5 1/2] drivers/misc: Share qbman init between archs   York Sun
• [U-Boot] [PATCH v5 2/2] Move SYS_DPAA_QBMAN to Kconfig   York Sun
• [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   York Sun
• [U-Boot] [PATCH] Powerpc: T208xQDS: Modify the comment of the CONFIG_FSL_PCIE_RESET macro   York Sun
• [U-Boot] [PATCH v2 1/3] armv8: fsl-layerscape: SPL size reduction   York Sun
• [U-Boot] [PATCH v2 2/3] armv8: ls1088a: SPL size reduction   York Sun
• [U-Boot] [PATCH v2 3/3] ls1088ardb: Add SD Secure boot target support   York Sun
• [U-Boot] [PATCH V2] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   David Lechner
• [U-Boot] [PATCH] pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros   Tuomas Tynkkynen
• [U-Boot] [PATCH] nds32: Drop unreferenced CONFIG_ADP_AG101P   Tuomas Tynkkynen
• [U-Boot] [PATCH] m68k: Drop unreferenced CONFIG_* defines   Tuomas Tynkkynen
• [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver   zhihuan he
• [U-Boot] [PATCH 2/3] rockchip: Add RV1108 SPL support   zhihuan he
• [U-Boot] [PATCH 3/3] rockchip: updata the style of reporting sdram cap   zhihuan he
• [U-Boot] [PATCH 0/3] These three patches add spl for rv1108   zhihuan he
• [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver   Kever Yang
• [U-Boot] [PATCH 0/3] These three patches add spl for rv1108   Kever Yang
• [U-Boot] [PATCH 0/3] These three patches add spl for rv1108   huan.he at rock-chips.com
• [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl   Yogesh Gaur
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] [PATCH] travis.yml: Support RISC-V   Andes
• [U-Boot] [PATCH] Initialize SHA buffer size var in passwd_abort   Martin Etnestad
• [U-Boot] [PATCH 0/2] Rename serial_stm32x7.c to serial_stm32.c   patrice.chotard at st.com
• [U-Boot] [PATCH 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c   patrice.chotard at st.com
• [U-Boot] [PATCH 2/2] configs: stm32: move config flag from defconfig to Kconfig   patrice.chotard at st.com
• [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning   Bin Meng
• [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()   Bin Meng
• [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support   Jaehoon Chung
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Bin Meng
• [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support   Masahiro Yamada
• [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support   Masahiro Yamada
• [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Michal Simek
• [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Jaehoon Chung
• [U-Boot] [PATCH 7/8] mmc: sdhci-cadence: add HS200 support   Jaehoon Chung
• [U-Boot] [PATCH] arm64: zynqmp: Enable Cortex-A53 Erratum 855873   Michal Simek
• [U-Boot] [PATCH 1/3] rockchip: add rv1108 sdram driver   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: updata the style of reporting sdram cap   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Jaehoon Chung
• [U-Boot] [PATCH 2/2] ARM: dts: exynos5: add the interrupt-parent property   Jaehoon Chung
• [U-Boot] [PATCH 2/3] rockchip: Add RV1108 SPL support   Dr. Philipp Tomsich
• [U-Boot] [PATCH v5 03/24] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail   Bryan O'Donoghue
• [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 04/11] rockchip: rk322x: enable tpl support   Philipp Tomsich
• [U-Boot] [PATCH 01/11] cmd: crc32: Disable by default on sunXi   Jagan Teki
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH v6 00/25] Fix and extend i.MX HAB layer   Bryan O'Donoghue
• [U-Boot] [PATCH v6 01/25] arm: imx: hab: Make authenticate_image return int   Bryan O'Donoghue
• [U-Boot] [PATCH v6 02/25] arm: imx: hab: Fix authenticate_image result code   Bryan O'Donoghue
• [U-Boot] [PATCH v6 03/25] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail   Bryan O'Donoghue
• [U-Boot] [PATCH v6 04/25] arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail   Bryan O'Donoghue
• [U-Boot] [PATCH v6 05/25] arm: imx: hab: Move IVT_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v6 06/25] arm: imx: hab: Move CSF_PAD_SIZE to hab.h   Bryan O'Donoghue
• [U-Boot] [PATCH v6 07/25] arm: imx: hab: Fix authenticate_image input parameters   Bryan O'Donoghue
• [U-Boot] [PATCH v6 08/25] arm: imx: hab: Add IVT header definitions   Bryan O'Donoghue
• [U-Boot] [PATCH v6 09/25] arm: imx: hab: Add IVT header verification   Bryan O'Donoghue
• [U-Boot] [PATCH v6 10/25] arm: imx: hab: Verify IVT self matches calculated address   Bryan O'Donoghue
• [U-Boot] [PATCH v6 11/25] arm: imx: hab: Only call ROM once headers are verified   Bryan O'Donoghue
• [U-Boot] [PATCH v6 12/25] arm: imx: hab: Print CSF based on IVT descriptor   Bryan O'Donoghue
• [U-Boot] [PATCH v6 13/25] arm: imx: hab: Print additional IVT elements during debug   Bryan O'Donoghue
• [U-Boot] [PATCH v6 14/25] arm: imx: hab: Define rvt_check_target()   Bryan O'Donoghue
• [U-Boot] [PATCH v6 15/25] arm: imx: hab: Implement hab_rvt_check_target   Bryan O'Donoghue
• [U-Boot] [PATCH v6 16/25] arm: imx: hab: Add a hab_rvt_check_target to image auth   Bryan O'Donoghue
• [U-Boot] [PATCH v6 17/25] arm: imx: hab: Print HAB event log only after calling ROM   Bryan O'Donoghue
• [U-Boot] [PATCH v6 18/25] arm: imx: hab: Make internal functions and data static   Bryan O'Donoghue
• [U-Boot] [PATCH v6 19/25] arm: imx: hab: Prefix authenticate_image with imx_hab   Bryan O'Donoghue
• [U-Boot] [PATCH v6 20/25] arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled   Bryan O'Donoghue
• [U-Boot] [PATCH v6 21/25] arm: imx: hab: Make authenticate_image() return zero on open boards   Bryan O'Donoghue
• [U-Boot] [PATCH v6 22/25] arm: imx: hab: Make imx_hab_is_enabled global   Bryan O'Donoghue
• [U-Boot] [PATCH v6 23/25] arm: imx: hab: Define rvt_failsafe()   Bryan O'Donoghue
• [U-Boot] [PATCH v6 24/25] arm: imx: hab: Implement hab_rvt_failsafe   Bryan O'Donoghue
• [U-Boot] [PATCH v6 25/25] arm: imx: hab: Add hab_failsafe console command   Bryan O'Donoghue
• [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env   Stefano Babic
• [U-Boot] api: bootelf: go: flush cache before starting   Emmanuel Vadot
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Andy Shevchenko
• [U-Boot] [PATCH V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] arm: zynq: Fix types in ps7_spl_init   Michal Simek
• [U-Boot] [PATCH 1/7] ARM: imx: Introduce dts for i.MX6SX-SDB   Stefano Babic
• [U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL   Stefano Babic
• [U-Boot] [PATCH V2 1/2] spi: fsl_qspi: support i.MX6UL/6ULLL/7D   Stefano Babic
• [U-Boot] [PATCH V2 2/2] imx: mx6ull-14x14-evk: enable DM QSPI driver   Stefano Babic
• [U-Boot] [PATCH] arm: imx: Rework i.MX specific commands to be excluded from SPL   Stefano Babic
• [U-Boot] [PATCH] toradex: imx6: Rework PF0100 fuse programming commands to not be in SPL   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_GSC code to not be included in SPL   Stefano Babic
• [U-Boot] [PATCH] imx: ventana: Rework CONFIG_CMD_EECONFIG code to not be included in SPL   Stefano Babic
• [U-Boot] [PATCH] misc: mxc_ocotp: check fuse word before programming on i.MX7ULP   Stefano Babic
• [U-Boot] [PATCH 1/3] mx6memcal: Fix the UART ports for mx6sabresd/auto boards   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6memcal: spl: Also take i.MX6ULL into account   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6memcal: spl: Disambiguate the error message   Stefano Babic
• [U-Boot] [PATCH 1/2] ARM: imx: cm_fx6: export board and soc info to env   Stefano Babic
• [U-Boot] [PATCH 2/2] ARM: imx: cm_fx6: env: try to determine dtb to use   Stefano Babic
• [U-Boot] [PATCH] drivers: pci: imx: fix enumeration logic error   Stefano Babic
• [U-Boot] [PATCH 1/5] arm: zynq: Add zc770-xm010 spl configuration   Michal Simek
• [U-Boot] [PATCH 2/5] arm: zynq: Add zc770-xm011 spl configuration   Michal Simek
• [U-Boot] [PATCH 3/5] arm: zynq: Add zc770-xm012 spl configuration   Michal Simek
• [U-Boot] [PATCH 4/5] arm: zynq: Add zc770-xm013 spl configuration   Michal Simek
• [U-Boot] [PATCH 5/5] arm: zynq: Add support for zc770-xm011-x16 configuration   Michal Simek
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] [PATCH 1/9] optee: Add lib entries for sharing OPTEE code across ports   Bryan O'Donoghue
• [U-Boot] [PATCH 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Bryan O'Donoghue
• [U-Boot] [PATCH 3/9] optee: Make OPTEE_TZDRAM_BASE a mandatory define   Bryan O'Donoghue
• [U-Boot] [PATCH 4/9] optee: Add optee_image_get_entry_point()   Bryan O'Donoghue
• [U-Boot] [PATCH 5/9] optee: Add optee_image_get_load_addr()   Bryan O'Donoghue
• [U-Boot] [PATCH 6/9] tools: mkimage: add optee image type   Bryan O'Donoghue
• [U-Boot] [PATCH 7/9] optee: Add optee_verify_bootm_image()   Bryan O'Donoghue
• [U-Boot] [PATCH 8/9] optee: Improve error printout   Bryan O'Donoghue
• [U-Boot] [PATCH 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot   Bryan O'Donoghue
• [U-Boot] [PATCH v2 0/9] reduce the size of the mmc core   Jaehoon Chung
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Bryan O'Donoghue
• [U-Boot] On writing .ext4 image to MMC   Adam Lee
• [U-Boot] On writing .ext4 image to MMC   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] arm: zynq: Enable SPL_CLK only if SPL is enabled   Ezequiel Garcia
• [U-Boot] [PATCH v6 21/25] arm: imx: hab: Make authenticate_image() return zero on open boards   Breno Matheus Lima
• [U-Boot] [PATCH V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   David Lechner
• [U-Boot] [PATCH] TCP and wget implementation v5.1   Joe Hershberger
• [U-Boot] [PATCH 3/9] optee: Make OPTEE_TZDRAM_BASE a mandatory define   Tom Rini
• [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   York Sun
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH] imx: fix CAAM base for i.MX6UL   Breno Matheus Lima
• [U-Boot] On writing .ext4 image to MMC   Adam Lee
• [U-Boot] On writing .ext4 image to MMC   Michael Nazzareno Trimarchi
• [U-Boot] On writing .ext4 image to MMC   Adam Lee
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Martin Townsend
• [U-Boot] [PATCH 1/1] dm: video: Correct color ANSI escape sequence support   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c   Vikas Manocha
• [U-Boot] [PATCH 2/2] configs: stm32: move config flag from defconfig to Kconfig   Vikas Manocha
• [U-Boot] [PATCH] powerpc: Drop unreferenced CONFIG_* defines   Tuomas Tynkkynen
• [U-Boot] [PATCH v3 00/20] Add gmac support for rk3399-evb rv1108-evb rk3328-evb and rk3229-evb   David Wu
• [U-Boot] [PATCH v3 01/20] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality   David Wu
• [U-Boot] [PATCH v3 02/20] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb   David Wu
• [U-Boot] [PATCH v3 03/20] rockchip: grf_rv1108.h: Fix the grf offsets   David Wu
• [U-Boot] [PATCH v3 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v3 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC   David Wu
• [U-Boot] [PATCH v3 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v3 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support   David Wu
• [U-Boot] [PATCH v3 08/20] clk: rockchip: Add rk3328 gamc clock support   David Wu
• [U-Boot] [PATCH v3 09/20] net: gmac_rockchip: Add rk3328 gmac support   David Wu
• [U-Boot] [PATCH v3 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328   David Wu
• [U-Boot] [PATCH v3 11/20] rockchip: dts: rk3328: Add gmac2io support   David Wu
• [U-Boot] [PATCH v3 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   David Wu
• [U-Boot] [PATCH v3 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   David Wu
• [U-Boot] [PATCH v3 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support   David Wu
• [U-Boot] [PATCH v3 15/20] clk: rockchip: Add rk322x gamc clock support   David Wu
• [U-Boot] [PATCH v3 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC   David Wu
• [U-Boot] [PATCH v3 17/20] config: evb-rk3229: Enable rk gmac configs   David Wu
• [U-Boot] [PATCH v3 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned   David Wu
• [U-Boot] [PATCH v3 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"   David Wu
• [U-Boot] [PATCH v3 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"   David Wu
• [U-Boot] [U-Boot, v2, 16/18] clk: rockchip: Add rk322x gamc clock support   David.Wu
• [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64   Jonathan Gray
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH 0/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_selftest: test start image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64   Tuomas Tynkkynen
• [U-Boot] [PATCH v2 1/4] ARM: qemu-arm: Add support for AArch64   Jonathan Gray
• [U-Boot] [PATCH v2] mtd: zynq: nand: Move board_nand_init() function to board.c   Ezequiel Garcia
• [U-Boot] [PATCH] mtd: zynq: nand: Move board_nand_init() function to board.c   Ezequiel Garcia
• [U-Boot] [PATCH] doc: Update the zynq u-boot status   Ezequiel Garcia
• [U-Boot] X86 Broadwell-DE override FSP configuration   vnktux
• [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: text output for device path end node   Heinrich Schuchardt
• [U-Boot] [PATCH 0/4] Add CONFIG_SPL_NAND_IDENT   Jörg Krause
• [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function   Jörg Krause
• [U-Boot] [PATCH 2/4] spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips   Jörg Krause
• [U-Boot] [PATCH 3/4] mtd: nand: mxs_nand_spl: refactor mxs_flash_ident   Jörg Krause
• [U-Boot] [PATCH 4/4] mtd: nand: mxs_nand_spl: add mxs_flash_full_ident   Jörg Krause
• [U-Boot] [PATCH v6 01/25] arm: imx: hab: Make authenticate_image return int   Stefano Babic
• [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function   Fabio Estevam
• [U-Boot] [PATCH 1/4] mtd: nand: export nand_get_flash_type function   Jörg Krause
• [U-Boot] [PATCH RESEND 0/4] Add CONFIG_SPL_NAND_IDENT   Jörg Krause
• [U-Boot] [PATCH RESEND 1/4] mtd: nand: export nand_get_flash_type function   Jörg Krause
• [U-Boot] [PATCH RESEND 2/4] spl, nand: add option CONFIG_SPL_NAND_IDENT to lookup for supported NAND chips   Jörg Krause
• [U-Boot] [PATCH RESEND 3/4] mtd: nand: mxs_nand_spl: refactor mxs_flash_ident   Jörg Krause
• [U-Boot] [PATCH RESEND 4/4] mtd: nand: mxs_nand_spl: add mxs_flash_full_ident   Jörg Krause
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Benoît Thébaudeau
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Fabio Estevam
• [U-Boot] [PATCH v1] x86: tangier: Make _CRS for BTH0 Serialized to avoid warning   Bin Meng
• [U-Boot] [PATCH v1] x86: Fix reference to QEMU variant of write_acpi_tables()   Bin Meng
• [U-Boot] [PATCH v1 1/2] x86: zImage: Move subarch assignment out of cmd_line check   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Bin Meng
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Kever Yang
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Peng Fan
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Kever Yang
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Peng Fan
• [U-Boot] [PATCH v3] armv8: errata: Implement workaround for Cortex-A53 Erratum 855873   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Enable SPL_CLK only if SPL is enabled   Michal Simek
• [U-Boot] [PATCH] doc: Update the zynq u-boot status   Michal Simek
• [U-Boot] [PATCH] doc: zynq: Describe status of zc770-xm011   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Provide a config to not map DDR region in MMU table   Michal Simek
• [U-Boot] [PATCH v6 0/2] Generic firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH v6 0/2] Generic firmware loader   Chee, Tien Fong
• [U-Boot] [PATCH] spl: unbreak CONFIG_SPL_MULTI_DTB_FIT after fixing CONFIG_OF_EMBED   Simon Goldschmidt
• [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox   Mario Six
• [U-Boot] [ANN] U-Boot v2018.01 is released   Wolfgang Denk
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] UEFI on u-boot   Alexander Graf
• [U-Boot] [PATCH v1 03/05] db820c: add qualcomm dragonboard 820C support   Jorge Ramirez
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH] arm64: zynqmp: Remove unused empty functions   Michal Simek
• [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis   Mario Six
• [U-Boot] [RESEND PATCH v2 02/27] cfi_flash: Fix style of pointer declarations   Mario Six
• [U-Boot] [RESEND PATCH v2 03/27] cfi_flash: Fix Parenthesis spacing   Mario Six
• [U-Boot] [RESEND PATCH v2 04/27] cfi_flash: Fix whitespace with casting   Mario Six
• [U-Boot] [RESEND PATCH v2 05/27] cfi_flash: Fix indent of case statements   Mario Six
• [U-Boot] [RESEND PATCH v2 06/27] cfi_flash: Fix spacing around casts/operators   Mario Six
• [U-Boot] [RESEND PATCH v2 07/27] cfi_flash: Fix missing/superfluous lines   Mario Six
• [U-Boot] [RESEND PATCH v2 08/27] cfi_flash: Remove braces for single-statement blocks   Mario Six
• [U-Boot] [RESEND PATCH v2 09/27] cfi_flash: Fix logical continuations   Mario Six
• [U-Boot] [RESEND PATCH v2 10/27] cfi_flash: Use __func__ macro instead of function name   Mario Six
• [U-Boot] [RESEND PATCH v2 11/27] cfi_flash: Fix comment style   Mario Six
• [U-Boot] [RESEND PATCH v2 12/27] cfi_flash: Remove unnecessary braces   Mario Six
• [U-Boot] [RESEND PATCH v2 13/27] cfi_flash: Add missing braces in blocks   Mario Six
• [U-Boot] [RESEND PATCH v2 14/27] cfi_flash: Fix spelling of "Unknown"   Mario Six
• [U-Boot] [RESEND PATCH v2 15/27] cfi_flash: Fix else after break   Mario Six
• [U-Boot] [RESEND PATCH v2 16/27] cfi_flash: Fix placement of brace   Mario Six
• [U-Boot] [RESEND PATCH v2 17/27] cfi_flash: Remove return from void function   Mario Six
• [U-Boot] [RESEND PATCH v2 18/27] cfi_flash: Remove assignments from if conditions   Mario Six
• [U-Boot] [RESEND PATCH v2 19/27] cfi_flash: Use u8 pointers instead of void pointers   Mario Six
• [U-Boot] [RESEND PATCH v2 20/27] cfi_flash: Fix strings split across lines   Mario Six
• [U-Boot] [RESEND PATCH v2 21/27] cfi_flash: Rename camel-case variables   Mario Six
• [U-Boot] [RESEND PATCH v2 22/27] flash: Fix spelling of "ERR_TIMOUT"   Mario Six
• [U-Boot] [RESEND PATCH v2 23/27] cfi_flash: Bound-check index before array access   Mario Six
• [U-Boot] [RESEND PATCH v2 24/27] cfi_flash: Fix long lines   Mario Six
• [U-Boot] [RESEND PATCH v2 25/27] cfi_flash: Fix indention   Mario Six
• [U-Boot] [RESEND PATCH v2 26/27] cfi_flash: Always define cfi_flash_num_flash_banks   Mario Six
• [U-Boot] [RESEND PATCH v2 27/27] mtd: cfi_flash: Make live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 1/4] clk: clk-uclass: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation   Mario Six
• [U-Boot] [RESEND PATCH v2 3/4] clk: Remove superfluous gd declarations   Mario Six
• [U-Boot] [RESEND PATCH v2 4/4] clk: Makefile: Sort entries alphabetically   Mario Six
• [U-Boot] [RESEND PATCH v2 1/4] core: ofnode: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/4] core: read: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 3/4] core: Add {ofnode, dev}_translate_address functions   Mario Six
• [U-Boot] [RESEND PATCH v2 4/4] core: Make device_is_compatible live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 1/2] lib: fdtdec: Fix whitespace style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/2] lib: fdtdec: Fix some style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 1/7] gpio: pca953x_gpio: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/7] gpio: pca953x_gpio: Make live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 3/7] gpio: mpc85xx_gpio: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 4/7] gpio: mpc85xx: Rename driver file to mpc8xxx   Mario Six
• [U-Boot] [RESEND PATCH v2 5/7] gpio: mpc8xxx: Rename Kconfig option, structures, and functions   Mario Six
• [U-Boot] [RESEND PATCH v2 6/7] gpio: mpc8xxx: Make compatible with more SoCs   Mario Six
• [U-Boot] [RESEND PATCH v2 7/7] gpio: mpc8xxx: Make live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 1/6] i2c: fsl_i2c: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/6] i2c: fsl_i2c: Remove inline declarations   Mario Six
• [U-Boot] [RESEND PATCH v2 3/6] i2c: fsl_i2c: Make live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 4/6] i2c: ihs_i2c: Prepare DM conversion   Mario Six
• [U-Boot] [RESEND PATCH v2 5/6] i2c: ihs_i2c: Make DM compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 6/6] i2c: ihs_i2c: Factor out send_buffer method   Mario Six
• [U-Boot] [RESEND PATCH v2 1/7] net: tsec: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/7] net: tsec: Fix memory leak in error path   Mario Six
• [U-Boot] [RESEND PATCH v2 3/7] net: tsec: Make live-tree compatible   Mario Six
• [U-Boot] [RESEND PATCH v2 4/7] net: phy: marvell: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 5/7] net: phy: marvell 88e151x: Fix handling of bare RGMII interface type   Mario Six
• [U-Boot] [RESEND PATCH v2 6/7] cmd: mdio: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 7/7] phy: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 1/8] spi: Fix style violation and improve code   Mario Six
• [U-Boot] [RESEND PATCH v2 2/8] spi: Remove obsolete spi_base_setup_slave_fdt   Mario Six
• [U-Boot] [RESEND PATCH v2 3/8] spi: Remove spi_flash_probe_fdt   Mario Six
• [U-Boot] [RESEND PATCH v2 4/8] spi: Remove spi_setup_slave_fdt   Mario Six
• [U-Boot] [RESEND PATCH v2 5/8] spi: Remove CONFIG_OF_SPI_FLASH   Mario Six
• [U-Boot] [RESEND PATCH v2 6/8] spi: sf_probe: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 7/8] spi: spi-uclass: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 8/8] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe   Mario Six
• [U-Boot] [RESEND PATCH v2 1/4] include: dm: Fix 'devioe'/'devuce' typos   Mario Six
• [U-Boot] [RESEND PATCH v2 2/4] serial: ns16550: Fix style violation   Mario Six
• [U-Boot] [RESEND PATCH v2 3/4] common: board_f: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 4/4] common: board_r: Fix style violations   Mario Six
• [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation   Dr. Philipp Tomsich
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Dr. Philipp Tomsich
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Dr. Philipp Tomsich
• [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation   Mario Six
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Stefano Babic
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Heiko Schocher
• [U-Boot] UEFI on u-boot   Alexander Graf
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH 1/2] ARM: dts: exynos5: remove the duplicated nodes   Anand Moon
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: dts: exynos5: add the interrupt-parent property   Anand Moon
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Simon Goldschmidt
• [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings   Simon Goldschmidt
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Peng Fan
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Martin Townsend
• [U-Boot] [PATCH 1/2] arm64: zynqmp: Prepare psu_init rework   Michal Simek
• [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation   Tom Rini
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Dr. Philipp Tomsich
• [U-Boot] [PATCH] checkpatch: Ignore 'short' Kconfig help entries   Tom Rini
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jason Rush
• [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 02/12] riscv: nx25: lib: Add relative lib funcs to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 03/12] riscv: nx25: dts: Add AE250 dts to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 04/12] riscv: nx25: include: Add header files to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 05/12] riscv: Add Kconfig to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 06/12] riscv: board: Add nx25-ae250 to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 07/12] riscv: configs: Add nx25-ae250.h to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 08/12] riscv: defconfig: Add nx25-ae250 defconfig to support RISC-V   Tom Rini
• [U-Boot] [U-Boot,v2,09/12] riscv: tools: Prelink u-boot   Tom Rini
• [U-Boot] [U-Boot,v2,10/12] riscv: Support standalone   Tom Rini
• [U-Boot] [U-Boot, v2, 11/12] riscv: Modify generic codes to support RISC-V   Tom Rini
• [U-Boot] [U-Boot, v2, 12/12] riscv: doc: Add relative doc to describe RISC-V   Tom Rini
• [U-Boot] travis.yml: Support RISC-V   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH 0/9] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] On writing .ext4 image to MMC   Vincent Prince
• [U-Boot] [PATCH 1/2] zynq: board: Remove checkboard()   Ezequiel Garcia
• [U-Boot] [PATCH 2/2] zynq: Support CPU info display   Ezequiel Garcia
• [U-Boot] [PATCH] nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT   Ezequiel Garcia
• [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables   Sumit Garg
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] [U-Boot, v6, 1/2] spl: Remove static declaration on spl_mmc_find_device function   Tom Rini
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Tom Rini
• [U-Boot] FW: u-boot v2016 vs v2013   Stefano Babic
• [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables   York Sun
• [U-Boot] [PATCH] TCP and wget implementation v5.1   Duncan Hare
• [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables   Sumit Garg
• [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables   York Sun
• [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl   York Sun
• [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3   York Sun
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support   York Sun
• [U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure   York Sun
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support   Sumit Garg
• [U-Boot] [PATCH] armv8: sec_firmware: Add support for multiple loadables   Sumit Garg
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR   York Sun
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH v5 0/4] mips: bmips: add HSSPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 1/4] dm: spi: add BCM63xx HSSPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un   Álvaro Fernández Rojas
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Benoît Thébaudeau
• [U-Boot] UEFI on u-boot   Heinrich Schuchardt
• [U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Stefano Babic
• [U-Boot] [U-Boot, v1, 01/03] spmi: msm: display the PMIC Arb version (debug)   Tom Rini
• [U-Boot] [U-Boot, v1, 02/03] poplar: configs: increase gunzip buffer size for the kernel   Tom Rini
• [U-Boot] [U-Boot,v1,03/03] dm: core: parse chosen node   Tom Rini
• [U-Boot] [U-Boot, v1, 01/05] env: enable accessing the environment in an EXT4 partition   Tom Rini
• [U-Boot] [U-Boot, v1, 02/05] arm: mach-snapdragon: refactor clock driver   Tom Rini
• [U-Boot] [U-Boot, v1, 03/05] db820c: add qualcomm dragonboard 820C support   Tom Rini
• [U-Boot] [U-Boot, v1, 04/05] db820c: enable pmic gpios for pm8994   Tom Rini
• [U-Boot] [U-Boot, v1, 05/05] db820c: stop autoboot when vol- pressed   Tom Rini
• [U-Boot] [U-Boot, v1, 01/07] db410c: configs: increase gunzip buffer size for the kernel   Tom Rini
• [U-Boot] [U-Boot, v1, 02/07] db410c: update wlan and bt mac addresses from firmware   Tom Rini
• [U-Boot] [U-Boot, v1, 03/07] db410c: replace reset driver with psci   Tom Rini
• [U-Boot] [U-Boot, v1, 04/07] fdtdec: allow board to provide fdt for CONFIG_OF_SEPARATE   Tom Rini
• [U-Boot] [U-Boot, v1, 05/07] db410c: use the device tree parsed by the lk loader.   Tom Rini
• [U-Boot] [U-Boot, v1, 06/07] db410c: add reserved-memory node to dts   Tom Rini
• [U-Boot] [U-Boot, v1, 07/07] db410c: on aarch64 the fdtfile is in per-vendor subdirectory   Tom Rini
• [U-Boot] checkpatch.pl checking   Tom Rini
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Chris Blake
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Pankaj Bansal
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Tom Rini
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Pankaj Bansal
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Tom Rini
• [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox   Simon Glass
• [U-Boot] [PATCH] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl   Yogesh Narayan Gaur
• [U-Boot] [PATCH v1] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl   Yogesh Gaur
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Pankaj Bansal
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Heiko Schocher
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Heiko Schocher
• [U-Boot] checkpatch.pl checking   Heiko Schocher
• [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator   Jaehoon Chung
• [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11   Jaehoon Chung
• [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver   Jaehoon Chung
• [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator   Jaehoon Chung
• [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR   Ashish Kumar
• [U-Boot] [U-Boot, v2, 01/12] riscv: cpu: Add nx25 to support RISC-V   陳建志
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH v3 0/4] arm: imx53: remove usage of mx53_dram_size   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH v3 1/4] arm: imx: cx9020: remove usage of mx53_dram_size   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH v3 2/4] arm: imx: cx9020: move dram init into common place   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH v3 3/4] arm: imx: m53evk: remove usage of mx53_dram_size   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH v3 4/4] arm: imx: mx53loco: remove usage of mx53_dram_size   linux-kernel-dev at beckhoff.com
• [U-Boot] [PATCH v2] armv8: Remove dependency of SERDES for LS CHASIS3   Sriram Dash
• [U-Boot] UEFI on u-boot   Heinrich Schuchardt
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH] rockchip: dts: rk3128: update pwm-cell for pwm0   Kever Yang
• [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command   Faiz Abbas
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes   Maxime Ripard
• [U-Boot] [PATCH v2 01/12] dfu: select HASH   Maxime Ripard
• [U-Boot] [PATCH v2 02/12] cmd: crc32: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 03/12] cmd: unzip: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 04/12] cmd: loadb: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 05/12] cmd: loads: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 06/12] cmd: misc: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 07/12] video: bpp8: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 08/12] video: bpp16: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 09/12] net: regex: Disable by default on sunXi   Maxime Ripard
• [U-Boot] [PATCH v2 10/12] sunxi: imply CONFIG_OF_LIBFDT_OVERLAY   Maxime Ripard
• [U-Boot] [PATCH v2 11/12] Makefile: Add size check to the u-boot.itb make target   Maxime Ripard
• [U-Boot] [PATCH v2 12/12] sunxi: Add limit with the MMC environment   Maxime Ripard
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Martin Townsend
• [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] [PATCH v2 01/15] cmd: nvedit: Get rid of the env lookup   Maxime Ripard
• [U-Boot] [PATCH v2 02/15] env: Rename env_driver_lookup_default and env_get_default_location   Maxime Ripard
• [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [PATCH v2 04/15] env: Make the env save message a bit more explicit   Maxime Ripard
• [U-Boot] [PATCH v2 05/15] env: Make it explicit where we're loading our environment from   Maxime Ripard
• [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v2 07/15] env: mmc: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v2 08/15] env: common: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v2 09/15] env: Support multiple environments   Maxime Ripard
• [U-Boot] [PATCH v2 10/15] env: Initialise all the environments   Maxime Ripard
• [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework   Maxime Ripard
• [U-Boot] [PATCH v2 12/15] env: Allow to build multiple environments in Kconfig   Maxime Ripard
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH v2 14/15] sunxi: Transition from the MMC to a FAT-based environment   Maxime Ripard
• [U-Boot] [PATCH v2 15/15] env: sunxi: Enable FAT-based environment support by default   Maxime Ripard
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 1/2] i2c: lpi2c: do not add 4 for bus seq   Heiko Schocher
• [U-Boot] [PATCH 2/2] imx: mx7ulp: modify lpi2c seq number   Heiko Schocher
• [U-Boot] [PATCH] i2c: mxc_i2c: Use or operation   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH 1/3] xilinx: zynqmp: Add new target with only qspi enabled   Michal Simek
• [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 2/3] xilinx: zynqmp: Add new target with only nand enabled   Michal Simek
• [U-Boot] [PATCH 3/3] xilinx: zynqmp: Add new target with only emmc enabled   Michal Simek
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] [PATCH 1/3] nand: arasan_nfc: Move common ecc struct initialization init routine   Michal Simek
• [U-Boot] [PATCH] nand: arasan: Select CONFIG_SYS_NAND_SELF_INIT   Michal Simek
• [U-Boot] FW: u-boot v2016 vs v2013   Peter Robinson
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Fabio Estevam
• [U-Boot] [PATCH 1/2] zynq: board: Remove checkboard()   Michal Simek
• [U-Boot] [PATCH 2/2] zynq: Support CPU info display   Michal Simek
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Heiko Schocher
• [U-Boot] [PATCH] powerpc: Drop unreferenced CONFIG_* defines   Mario Six
• [U-Boot] X86 Broadwell-DE override FSP configuration   Bin Meng
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Richard Weinberger
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller   Alexander Graf
• [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux   Alexander Graf
• [U-Boot] [PATCH 2/3] mmc: Add bcm2835 sdhost controller   Alexander Graf
• [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support   Alexander Graf
• [U-Boot] [PATCH 0/7] RPi: Properly handle dynamic serial configuration   Alexander Graf
• [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH 2/7] serial: Allow boards to determine whether a serial device is usable   Alexander Graf
• [U-Boot] [PATCH 3/7] rpi: Remove runtime disabling support for serial   Alexander Graf
• [U-Boot] [PATCH 4/7] serial: bcm283x_mu: Remove support for post-init disabling   Alexander Graf
• [U-Boot] [PATCH 5/7] rpi: Properly detect which serial device is active   Alexander Graf
• [U-Boot] [PATCH 6/7] rpi: Determine PL011/Mini-UART availability at runtime   Alexander Graf
• [U-Boot] [PATCH 7/7] rpi: Force skip_init on serial devices   Alexander Graf
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Martin Townsend
• [U-Boot] UEFI on u-boot   Alexander Graf
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Tom Rini
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Breno Matheus Lima
• [U-Boot] [PATCH 1/1] efi_loader: memory reservations according to e820 table   Alexander Graf
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Marek Vasut
• [U-Boot] [PATCH 1/7] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c   Simon Glass
• [U-Boot] [PATCH 2/7] libfdt: fix <linux/libfdt.h>   Simon Glass
• [U-Boot] [PATCH 3/7] tools: include necessary headers explicitly   Simon Glass
• [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h   Simon Glass
• [U-Boot] [PATCH 5/7] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper   Simon Glass
• [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper   Simon Glass
• [U-Boot] [PATCH V3 04/31] time: add wait_mask_set/clr_timeout helper functions   Simon Glass
• [U-Boot] [PATCH V3 29/31] power: pmic/regulator allow dm be omitted by SPL   Simon Glass
• [U-Boot] [PATCH v4 1/1] vsprintf.c: add EFI device path printing   Simon Glass
• [U-Boot] [PATCH v3 01/16] efi_selftest: colored test output   Simon Glass
• [U-Boot] [PATCH v3 02/16] efi_loader: simplify efi_remove_all_protocols   Simon Glass
• [U-Boot] [PATCH v3 03/16] efi_selftest: do not try to close device path protocol   Simon Glass
• [U-Boot] [PATCH v3 16/16] efi_loader: consistently use efi_handle_t for handles   Simon Glass
• [U-Boot] [PATCH v8 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338   Simon Glass
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] [PATCH v8 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348   Simon Glass
• [U-Boot] [PATCH v8 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358   Simon Glass
• [U-Boot] [PATCH v8 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380   Simon Glass
• [U-Boot] [PATCH v8 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268   Simon Glass
• [U-Boot] [PATCH v8 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Simon Glass
• [U-Boot] [PATCH v8 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D   Simon Glass
• [U-Boot] [PATCH v2 1/3] arm64: zynqmp: Call psu_init() only when ZYNQMP_PSU_INIT_ENABLED   Michal Simek
• [U-Boot] [PATCH v2 2/3] arm64: zynqmp: Prepare psu_init rework   Michal Simek
• [U-Boot] [PATCH v2 3/3] arm64: zynqmp: Add psu_init for zcu102-rev1.0   Michal Simek
• [U-Boot] [PATCH 4/7] libfdt: move lib/libfdt/libfdt.h to include/libfdt.h   Masahiro Yamada
• [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command   Tom Rini
• [U-Boot] [PATCH 6/7] libfdt: migrate libfdt.h to a wrapper   Masahiro Yamada
• [U-Boot] [PATCH 1/4] ARC: read pae_exist bit from MMU BCR   Eugeniy Paltsev
• [U-Boot] [PATCH 2/4] ARC: ARCv2: CACHE: fix work without IOC   Eugeniy Paltsev
• [U-Boot] [PATCH 3/4] ARC: CACHE: disable IOC by default   Eugeniy Paltsev
• [U-Boot] [PATCH 4/4] ARC: CACHE: fix style violations   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: HSDK: hang on panic   Eugeniy Paltsev
• [U-Boot] [PATCH 7/7] libfdt: migrate include/libfdt_env.h to a wrapper   Masahiro Yamada
• [U-Boot] [PATCH] sunxi: Fix display timing flags   Giulio Benetti
• [U-Boot] [PATCH 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Marek Vasut
• [U-Boot] [PATCH] clk: rmobile: Assure SD-IF clock are configured correctly   Marek Vasut
• [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()   Marek Vasut
• [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Marek Vasut
• [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks   Marek Vasut
• [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1   Marek Vasut
• [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support   Marek Vasut
• [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences   Marek Vasut
• [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Enable HS200 mode on RCar Gen3   Marek Vasut
• [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator   Anand Moon
• [U-Boot] [PATCH v1] driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl   York Sun
• [U-Boot] [PATCH 1/4] ARC: HSDK: CGU: update AXI, TUN, ARC clock options   Eugeniy Paltsev
• [U-Boot] [PATCH 2/4] ARC: HSDK: CGU: fix using plat data instead of priv data   Eugeniy Paltsev
• [U-Boot] [PATCH 3/4] ARC: HSDK: CGU: add 'Hz' when printing clock frequency   Eugeniy Paltsev
• [U-Boot] [PATCH 4/4] ARC: HSDK: DTS: add cgu-clk node   Eugeniy Paltsev
• [U-Boot] Pull request, u-boot-tegra/master   Stephen Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH 2/2] zynq: Support CPU info display   Ezequiel Garcia
• [U-Boot] [PATCH] ARC: invalidate i$ and d$ at startup code   Eugeniy Paltsev
• [U-Boot] [PATCH] TCP and wget implementation v5.1   Joe Hershberger
• [U-Boot] [PATCH] arm: mach-omap2: Pass args to secure ROM in SRAM in SPL   Andrew F. Davis
• [U-Boot] [PATCH] tools: Update python "help" tests to cope with "more" oddities   Tom Rini
• [U-Boot] [PATCH] tools: Update python "help" tests to cope with "more" oddities   Simon Glass
• [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails   Heinrich Schuchardt
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Benoît Thébaudeau
• [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] rockchip: rk3036: enable rockusb support on rk3036 based device   Eddie Cai
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH 2/2] rockchip: firefly-rk3399: enable SPL_ATF_NO_PLATFORM_PARAM   Kever Yang
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Fabio Estevam
• [U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP   Jaehoon Chung
• [U-Boot] [PATCH] spl: atf: pass NULL for bl32_ep pc   Kever Yang
• [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator   Jaehoon Chung
• [U-Boot] [PATCH] i2c: imx: bus arbitration fix when reading block data   Heiko Schocher
• [U-Boot] [PATCH] arm: bootm-fdt.c: fix compiler warning   Heiko Schocher
• [U-Boot] [PATCH] arm: zynq: Update years in copyright to reflect latest changes   Michal Simek
• [U-Boot] [PATCH 1/2] fsl: common :qixis: Add ifc and emmc switching via qixis   Ashish Kumar
• [U-Boot] [PATCH 2/2] armv8: ls1088: Add ifc, emmc lbmap and rcw_src entry for ls1088   Ashish Kumar
• [U-Boot] [PATCH 2/2] zynq: Support CPU info display   Michal Simek
• [U-Boot] [PATCH] sunxi: Fix display timing flags   Maxime Ripard
• [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command   Faiz Abbas
• [U-Boot] [PATCH 0/3] power: s2mps11: Support the DM regulator   Jaehoon Chung
• [U-Boot] [PATCH 1/7] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: sdhci-cadence: add HS200 support   Masahiro Yamada
• [U-Boot] [PATCH 0/3] STM32: Remove STMMAC clock setup from board   patrice.chotard at st.com
• [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746   patrice.chotard at st.com
• [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup   patrice.chotard at st.com
• [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()   patrice.chotard at st.com
• [U-Boot] [PATCH v2 0/7] RPi: Properly handle dynamic serial configuration   Alexander Graf
• [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Alexander Graf
• [U-Boot] [PATCH v2 3/7] rpi: Remove runtime disabling support for serial   Alexander Graf
• [U-Boot] [PATCH v2 4/7] serial: bcm283x_mu: Remove support for post-init disabling   Alexander Graf
• [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active   Alexander Graf
• [U-Boot] [PATCH v2 6/7] rpi: Determine PL011/Mini-UART availability at runtime   Alexander Graf
• [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices   Alexander Graf
• [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] [PATCH] arm: zynq: Mark cc108 uart to be initialized before relocation   Michal Simek
• [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux   Amit Tomer
• [U-Boot] mmc1 not working on Samsung snow chromebook   Jaehoon Chung
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Jaehoon Chung
• [U-Boot] [PATCH v8 00/11] Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v8 01/11] armv8: lsch3: Add serdes and DDR voltage setup   Rajesh Bhagat
• [U-Boot] [PATCH v8 02/11] board: common:vid: Add LS1088A VID Supported voltage values   Rajesh Bhagat
• [U-Boot] [PATCH v8 03/11] board: common: vid: Add board specific vdd adjust API   Rajesh Bhagat
• [U-Boot] [PATCH v8 04/11] board: common: vid: Move IR chip specific code in flag   Rajesh Bhagat
• [U-Boot] [PATCH v8 05/11] Kconfig: Add LTC3882 voltage regulator config   Rajesh Bhagat
• [U-Boot] [PATCH v8 06/11] board: common: vid: Add support for LTC3882 voltage regulator chip   Rajesh Bhagat
• [U-Boot] [PATCH v8 07/11] ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs   Rajesh Bhagat
• [U-Boot] [PATCH v8 08/11] ls1088a: ddr: configure DDR for 0.9v for VID support   Rajesh Bhagat
• [U-Boot] [PATCH v8 09/11] common: board_f: vid: Add VID specific API to adjust core voltage   Rajesh Bhagat
• [U-Boot] [PATCH v8 10/11] ls1088a: Add VID support for QDS and RDB platforms   Rajesh Bhagat
• [U-Boot] [PATCH v8 11/11] armv8: ls1088a: vid: Compiling VID specific functions for SPL   Rajesh Bhagat
• [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock   Jaehoon Chung
• [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails   Heinrich Schuchardt
• [U-Boot] [PATCH v2 6/7] mmc: zynq_sdhci: Add support for SD3.0   Jaehoon Chung
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Jaehoon Chung
• [U-Boot] [PATCH 0/3] Rpi: Add support for second sd host controller   Jaehoon Chung
• [U-Boot] [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] crypto/fsl: Fix HW accelerated hash commands   Breno Lima
• [U-Boot] [PATCH V4 30/32] power: pmic/regulator allow dm be omitted by SPL   Jaehoon Chung
• [U-Boot] [PATCH V5 29/31] power: pmic/regulator allow dm be omitted by SPL   Jaehoon Chung
• [U-Boot] [PATCH] configs: keystone2: env: Fix burn_uboot_spi command   Tom Rini
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   RB23
• [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi   Tom Rini
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Simon Goldschmidt
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Marek Vasut
• [U-Boot] [PATCH v2 00/15] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   RB23
• [U-Boot] [PATCH 0/5] zynq: Fun with board and CPU info display   Ezequiel Garcia
• [U-Boot] [PATCH 1/5] zynq: Define macros for the device names   Ezequiel Garcia
• [U-Boot] [PATCH 2/5] zynq: Rework FPGA initialization   Ezequiel Garcia
• [U-Boot] [PATCH 3/5] zynq: Support CPU info display   Ezequiel Garcia
• [U-Boot] [PATCH 4/5] zynq: board: Remove checkboard   Ezequiel Garcia
• [U-Boot] [PATCH 5/5] configs: zynq: Enable DISPLAY_CPUINFO   Ezequiel Garcia
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Jean-Jacques Hiblot
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Richard Weinberger
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Bryan O'Donoghue
• [U-Boot] [BUG] x86: Could not get phandle node for /gpios at 0:num-gpios(cell 0)   Heinrich Schuchardt
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/18] efi_loader: return NULL from device path functions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 03/18] efi_loader: correct find simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 04/18] efi_loader: print device path when entering efi_load_image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/18] efi_loader: allocate correct memory type for EFI image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 06/18] efi_loader: check tables in helloworld.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v2 07/18] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH v2 08/18] efi_loader: efi_disk_register: correctly determine if_type_name   Heinrich Schuchardt
• [U-Boot] [PATCH v2 09/18] efi_loader: make efi_block_io_guid a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 10/18] efi_loader: provide a function to create a partition node   Heinrich Schuchardt
• [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 13/18] efi_loader: provide function to get last node of a device path   Heinrich Schuchardt
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Heinrich Schuchardt
• [U-Boot] [PATCH v2 15/18] tools: provide a tool to convert a binary file to an include   Heinrich Schuchardt
• [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver   Heinrich Schuchardt
• [U-Boot] [PATCH v2 17/18] efi_selftest: provide a test for block io   Heinrich Schuchardt
• [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices   Heinrich Schuchardt
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Leo Li
• [U-Boot] [PATCH 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746   Vikas Manocha
• [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails   Simon Glass
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Simon Glass
• [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices   Simon Glass
• [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active   Simon Glass
• [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()   Vikas Manocha
• [U-Boot] [PATCH 2/3] clk: clk_stm32f: Remove STMMAC clock setup   Vikas Manocha
• [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11   Simon Glass
• [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver   Simon Glass
• [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator   Simon Glass
• [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux   Simon Glass
• [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support   Simon Glass
• [U-Boot] X86 Broadwell-DE override FSP configuration   vnktux
• [U-Boot] [PATCH 3/3] mmc: bcm2835_sdhci: Add pinmux support   Alexander Graf
• [U-Boot] [PATCH 1/3] bcm2835_gpio: Add support for pinmux   Alexander Graf
• [U-Boot] [PATCH] ubi: Fix filesystem corruption on detach when fastmap enabled   Martin Townsend
• [U-Boot] [PATCH v2 1/7] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function   Simon Glass
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Alexander Graf
• [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer   Simon Glass
• [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active   Alexander Graf
• [U-Boot] [PATCH v2 07/15] env: mmc: Make the debug messages play a little nicer   Simon Glass
• [U-Boot] [PATCH v2 08/15] env: common: Make the debug messages play a little nicer   Simon Glass
• [U-Boot] [PATCH v2 10/15] env: Initialise all the environments   Simon Glass
• [U-Boot] [PATCH v2 11/15] env: mmc: depends on the MMC framework   Simon Glass
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Simon Glass
• [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices   Alexander Graf
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Simon Glass
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Alexander Graf
• [U-Boot] x86: 64-bit U-boot image compilation errors   Krehic, Damir
• [U-Boot] [PATCH v2 2/7] serial: Allow boards to determine whether a serial device is usable   Simon Glass
• [U-Boot] [PATCH v2 5/7] rpi: Properly detect which serial device is active   Simon Glass
• [U-Boot] [PATCH v2 7/7] rpi: Force skip_init on serial devices   Simon Glass
• [U-Boot] [PATCH v2 0/2] Rpi: Add support for second sd host controller   Alexander Graf
• [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver   Alexander Graf
• [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller   Alexander Graf
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Kever Yang
• [U-Boot] [PATCH] ARM: dts: Freescale: re-license device tree files under X11   Tom Rini
• [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support   Heinrich Schuchardt
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Pankaj Bansal
• [U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver   Chris Packham
• [U-Boot] [PATCH v2 1/4] ddr: marvell: only assert M_ODT[0] on write for a single CS   Chris Packham
• [U-Boot] [PATCH v2 2/4] ddr: marvell: use correct TREFI value   Chris Packham
• [U-Boot] [PATCH v2 3/4] ddr: marvell: update additional ODT setting   Chris Packham
• [U-Boot] [PATCH v2 4/4] ddr: marvell: update ddr controller init and freq   Chris Packham
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller   Jaehoon Chung
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Jason Rush
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Simon Goldschmidt
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] X86 Broadwell-DE override FSP configuration   Bin Meng
• [U-Boot] [PATCH v2 0/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/2] efi_selftest: test start image   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()   Patrice CHOTARD
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Simon Goldschmidt
• [U-Boot] [PATCH v2] ubi: Ensure no fastmap flush after uif_close   Martin Townsend
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Jaehoon Chung
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Goldschmidt
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Goldschmidt
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] arm64: zynqmp: Enable gem on zc1751-dc5   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Add identification string to ep108   Michal Simek
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Stefano Babic
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Guillaume Gardet
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Peng Fan
• [U-Boot] mmc1 not working on Samsung snow chromebook   Guillaume Gardet
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Alexander Graf
• [U-Boot] [PATCH v2 2/2] efi_selftest: test start image   Alexander Graf
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/18] efi_loader: address of the simple file system protocol   Alexander Graf
• [U-Boot] [PATCH v2 2/2] efi_selftest: test start image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Alexander Graf
• [U-Boot] UDP packet sender   Gaëtan Carlier
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Marek Vasut
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Bryan O'Donoghue
• [U-Boot] [PATCH 0/6] Add stmf429-evaluation board support   patrice.chotard at st.com
• [U-Boot] [PATCH 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot   patrice.chotard at st.com
• [U-Boot] [PATCH 2/6] clk: stm32: retrieve external oscillator frequency from DT   patrice.chotard at st.com
• [U-Boot] [PATCH 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series   patrice.chotard at st.com
• [U-Boot] [PATCH 4/6] board: stm32: Add stm32f429-evaluation board support   patrice.chotard at st.com
• [U-Boot] [PATCH 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support   patrice.chotard at st.com
• [U-Boot] [PATCH 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file   patrice.chotard at st.com
• [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images   Michal Simek
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Tom Rini
• [U-Boot] [PATCH v2 0/3] STM32: Remove STMMAC clock setup from board   patrice.chotard at st.com
• [U-Boot] [PATCH v2 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746   patrice.chotard at st.com
• [U-Boot] [PATCH v2 2/3] clk: clk_stm32f: Remove STMMAC clock setup   patrice.chotard at st.com
• [U-Boot] [PATCH v2 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()   patrice.chotard at st.com
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Pankaj Bansal
• [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Tom Rini
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Tom Rini
• [U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images   Michal Simek
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes   Lokesh Vutla
• [U-Boot] [PATCH v2 00/13] arm: am57xx: Add support for am574-idk   Lokesh Vutla
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Pankaj Bansal
• [U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig   Eric Nelson
• [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support   Eric Nelson
• [U-Boot] Broadwell-DE booting time   vnktux
• [U-Boot] [PATCH v2 03/15] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH 1/2] mx6memcal: launder through savedefconfig   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6memcal: enable SDP support   Fabio Estevam
• [U-Boot] [PATCH v2 06/15] env: fat: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH] mx6memcal: fix comment in board header file   Eric Nelson
• [U-Boot] [PATCH v2 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions   Alexander Graf
• [U-Boot] [PATCH v2 11/18] efi_loader: make efi_disk_create_partitions a global symbol   Alexander Graf
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Alexander Graf
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Heinrich Schuchardt
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Stefan Roese
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] Individual files dual licenses   York Sun
• [U-Boot] [PATCH v2 1/2] bcm283x: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] Individual files dual licenses   Tom Rini
• [U-Boot] Individual files dual licenses   York Sun
• [U-Boot] Individual files dual licenses   Tom Rini
• [U-Boot] Individual files dual licenses   York Sun
• [U-Boot] Individual files dual licenses   Tom Rini
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Alexander Graf
• [U-Boot] Individual files dual licenses   York Sun
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: correctly call images   Alexander Graf
• [U-Boot] LS1046ARDB QSPI ENV fails   York Sun
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Alexander Graf
• [U-Boot] Individual files dual licenses   Tom Rini
• [U-Boot] [PATCH] tools: remove unused ret   Jelle van der Waa
• [U-Boot] [PATCH v3 0/2] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/1] efi_loader: correctly call images   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/2] efi_selftest: test start image   Heinrich Schuchardt
• [U-Boot] [PATCH v2 14/18] efi_loader: provide links between devices EFI handles   Heinrich Schuchardt
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Anand Moon
• [U-Boot] Individual files dual licenses   York Sun
• [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver   Heinrich Schuchardt
• [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow   Paul Burton
• [U-Boot] [PATCH 0/9] log: Support control over the log output format   Simon Glass
• [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox   Simon Glass
• [U-Boot] [PATCH 1/2] dtoc: Allow DTC environment variable to provide path to dtc   Simon Glass
• [U-Boot] [PATCH 2/2] test: Set the DTC environment variable   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memory   Heinrich Schuchardt
• [U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes   Paul Burton
• [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device   Simon Glass
• [U-Boot] [PATCH] cmd: console: Add serial devices probe command   Simon Glass
• [U-Boot] [PATCH] tools: remove unused ret   Simon Glass
• [U-Boot] [PATCH v2 1/2] armv8/kconfig: Align boards of same family at one place   York Sun
• [U-Boot] [PATCH v2 2/2] board: ls1012a: LS1012A-2G5RDB board support   York Sun
• [U-Boot] [PATCH] serial: lpuart: Proper device identification   York Sun
• [U-Boot] [PATCH v2] armv8/ls1088a: configure PMU's PCTBENR to enable WDT   York Sun
• [U-Boot] [PATCH v3] configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE   York Sun
• [U-Boot] [PATCH] board/ls2081ardb: Update board related prints   York Sun
• [U-Boot] [PATCH] board/ls2081ard: Correct code to get QMAP value in checkboard   York Sun
• [U-Boot] [PATCH] powerpc: P1010RDB: Rework local command to not be included in SPL   York Sun
• [U-Boot] [PATCH] arm: ls1021atwr: Rework local commands to not be included in SPL   York Sun
• [U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary   York Sun
• [U-Boot] [PATCH 1/2] arm64: ls1046a: Add sata distro boot support   York Sun
• [U-Boot] [PATCH 2/2] arm64: ls1012a: Add sata distro boot support   York Sun
• [U-Boot] [PATCH] armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig   York Sun
• [U-Boot] [PATCH v2 1/2] env: sf: Add support for env init for QSPI-NOR   York Sun
• [U-Boot] [PATCH v2 2/2] armv8: ls1088ardb: Add environment variable address location for QSPI-NOR   York Sun
• [U-Boot] [U-Boot, 01/23] mmc: omap_hsmmc: cleanup clock configuration   Tom Rini
• [U-Boot] [PATCH RFC] sandbox: Add 64-bit sandbox   Mario Six
• [U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox   Mario Six
• [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device   Heinrich Schuchardt
• [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M   Peng Fan
• [U-Boot] [PATCH 2/5] mmc: fsl_esdhc: add strobe and tuning entry   Peng Fan
• [U-Boot] [PATCH 3/5] ARM: dts: add pinmux and tuning settings for HS200/SDR104   Peng Fan
• [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200   Peng Fan
• [U-Boot] [PATCH 5/5] imx: mx7dsabresd: enable UHS and HS200   Peng Fan
• [U-Boot] [PATCH v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM   Lokesh Vutla
• [U-Boot] [PATCH 0/2] warp7: add UART6 support   Ryan Harkin
• [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode   Ryan Harkin
• [U-Boot] [PATCH 2/2] warp7: add support for console on UART6 and mikroBus   Ryan Harkin
• [U-Boot] [PATCH 0/2] Fix QSPI boot on am43xx_idk   Faiz Abbas
• [U-Boot] [PATCH 1/2] configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE   Faiz Abbas
• [U-Boot] [PATCH 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl   Faiz Abbas
• [U-Boot] [PATCH] armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig   Ashish Kumar
• [U-Boot] [PATCH v2 18/18] efi_loader: fix ExitBootServices   Alexander Graf
• [U-Boot] [PATCH 0/2] warp7: add UART6 support   Bryan O'Donoghue
• [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200   Jaehoon Chung
• [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow   Daniel Schwierzeck
• [U-Boot] [PATCH] boston: Pad binary in .mcs to a multiple of 16 bytes   Daniel Schwierzeck
• [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode   Stefan Agner
• [U-Boot] U-boot can verify an HW signature?   Saverio Mori
• [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree   Eugeniy Paltsev
• [U-Boot] [PATCH] ARC: devboards: Allow huge uImages (up to 128 MiB)   Alexey Brodkin
• [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode   Ryan Harkin
• [U-Boot] using raw eMMC   Bishop, Mark (STRT)
• [U-Boot] Please pull ARC changes   Alexey Brodkin
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Tom Rini
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Matthijs van Duin
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Tom Rini
• [U-Boot] [PATCH 0/9] log: Support control over the log output format   Tom Rini
• [U-Boot] [PATCH v3 07/16] efi_loader: implement OpenProtocolInformation   Alexander Graf
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Matthijs van Duin
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   York Sun
• [U-Boot] [PATCH] clk: clk_stm32f: Fix PLLSAICFGR_PLLSAIP_4 divider value   patrice.chotard at st.com
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Tom Rini
• [U-Boot] [PATCH v2 16/18] efi_driver: EFI block driver   Alexander Graf
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Marek Vasut
• [U-Boot] U-boot can verify an HW signature?   Breno Matheus Lima
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH v4 1/1] efi_selftest: test start image   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: implement OpenProtocolInformation   Heinrich Schuchardt
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Marek Vasut
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Nuno Goncalves
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Nuno Gonçalves
• [U-Boot] U-boot can verify an HW signature?   Saverio Mori
• [U-Boot] [PATCH v3 00/18] efi_loader: enable EFI driver provided block device   Heinrich Schuchardt
• [U-Boot] [PATCH v3 01/18] efi_loader: return NULL from device path functions   Heinrich Schuchardt
• [U-Boot] [PATCH v3 02/18] efi_loader: address of the simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 03/18] efi_loader: correct find simple file system protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 04/18] efi_loader: print device path when entering efi_load_image   Heinrich Schuchardt
• [U-Boot] [PATCH v3 05/18] efi_loader: allocate correct memory type for EFI image   Heinrich Schuchardt
• [U-Boot] [PATCH v3 06/18] efi_loader: check tables in helloworld.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v3 07/18] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH v3 08/18] efi_loader: efi_disk_register: correctly determine if_type_name   Heinrich Schuchardt
• [U-Boot] [PATCH v3 09/18] efi_loader: make efi_block_io_guid a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 10/18] efi_loader: provide a function to create a partition node   Heinrich Schuchardt
• [U-Boot] [PATCH v3 11/18] efi_loader: make efi_disk_create_partitions a global symbol   Heinrich Schuchardt
• [U-Boot] [PATCH v3 12/18] efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions   Heinrich Schuchardt
• [U-Boot] [PATCH v3 13/18] efi_loader: provide function to get last node of a device path   Heinrich Schuchardt
• [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles   Heinrich Schuchardt
• [U-Boot] [PATCH v3 15/18] efi_loader: add check_tpl parameter to efi_signal_event   Heinrich Schuchardt
• [U-Boot] [PATCH v3 16/18] efi_loader: fix ExitBootServices   Heinrich Schuchardt
• [U-Boot] [PATCH v3 17/18] efi_driver: EFI block driver   Heinrich Schuchardt
• [U-Boot] [PATCH v3 18/18] efi_selftest: provide a test for block io   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/9] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/9] optee: Add lib entries for sharing OPTEE code across ports   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Bryan O'Donoghue
• [U-Boot] [PATCH v2 3/9] optee: Add CONFIG_OPTEE_TZDRAM_BASE   Bryan O'Donoghue
• [U-Boot] [PATCH v2 4/9] optee: Add optee_image_get_entry_point()   Bryan O'Donoghue
• [U-Boot] [PATCH v2 5/9] optee: Add optee_image_get_load_addr()   Bryan O'Donoghue
• [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type   Bryan O'Donoghue
• [U-Boot] [PATCH v2 7/9] optee: Add optee_verify_bootm_image()   Bryan O'Donoghue
• [U-Boot] [PATCH v2 8/9] optee: Improve error printout   Bryan O'Donoghue
• [U-Boot] [PATCH v2 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot   Bryan O'Donoghue
• [U-Boot] [PATCH v2 8/9] optee: Improve error printout   Andrew F. Davis
• [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type   Andrew F. Davis
• [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles   Alexander Graf
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Tom Rini
• [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles   Heinrich Schuchardt
• [U-Boot] [U-Boot, 1/4] serial: ns16550: da8xx (freon/primus) is not omap-like   Adam Ford
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Jernej Škrabec
• [U-Boot] [PATCH v3 14/18] efi_loader: provide link between devices and EFI handles   Alexander Graf
• [U-Boot] [PATCH v3 17/18] efi_driver: EFI block driver   Alexander Graf
• [U-Boot] Please pull ARC changes   Tom Rini
• [U-Boot] [U-Boot, v2, 1/5] Revert "omap_hsmmc: update struct hsmmc to accommodate omap3 from DT"   Tom Rini
• [U-Boot] [U-Boot, v2, 2/5] omap: Update the base address of the MMC controllers   Tom Rini
• [U-Boot] [U-Boot, v2, 3/5] mmc: omap_hsmmc: Add support for DMA (ADMA2)   Tom Rini
• [U-Boot] [U-Boot, v2, 4/5] mmc: omap_hsmmc: Enable Auto command (CMD12) enable   Tom Rini
• [U-Boot] [U-Boot, v2, 5/5] mmc: omap_hsmmc: Fix incorrect bit operations for disabling a bit   Tom Rini
• [U-Boot] [U-Boot, v2] board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM   Tom Rini
• [U-Boot] [U-Boot, v3, 1/6] configs: k2g_evm: Allocate more space for u-boot   Tom Rini
• [U-Boot] [U-Boot, v3, 2/6] board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] tools: omapimage: Fix mismatch of image size in header   Tom Rini
• [U-Boot] [U-Boot, v3, 4/6] arm: am33xx: Avoid writing into reserved DPLL divider   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] board: ti: dra76: mux wakeup2 as gpio1_2   Tom Rini
• [U-Boot] [U-Boot, v3, 6/6] board: ti: k2g: Make ddr3* declarations as static   Tom Rini
• [U-Boot] dt-bindings: leds: adopt Linux PCA9532 binding constants   Tom Rini
• [U-Boot] [U-Boot, v2, 01/13] drivers: dma: ti-edma3: add support for memory fill   Tom Rini
• [U-Boot] [U-Boot, v2, 02/13] arm: emif-common: Add ecc specific emif registers   Tom Rini
• [U-Boot] [U-Boot, v2, 03/13] arm: emif-common: Add suppport for enabling ECC   Tom Rini
• [U-Boot] [U-Boot, v2, 04/13] arm: keystone: Move cmd_ddr3 to a common place   Tom Rini
• [U-Boot] [U-Boot, v2, 05/13] cmd: ti: Generalize cmd_ddr3 command   Tom Rini
• [U-Boot] [U-Boot, v2, 06/13] arm: dra762: Add support for device package identification   Tom Rini
• [U-Boot] [U-Boot, v2, 07/13] board: ti: am574x-idk: Add epprom support   Tom Rini
• [U-Boot] [U-Boot, v2, 08/13] board: ti: am574x-idk: Add hw data support   Tom Rini
• [U-Boot] [U-Boot, v2, 09/13] board: ti: am574x-idk: Add ddr data support   Tom Rini
• [U-Boot] [U-Boot, v2, 10/13] board: ti: am574x-idk: Update pinmux using latest PMT   Tom Rini
• [U-Boot] [U-Boot,v2,11/13] board: ti: am57xx: Enable CMD_DDR3   Tom Rini
• [U-Boot] [U-Boot, v2, 12/13] ARM: dts: am574x-idk: Add initial support   Tom Rini
• [U-Boot] [U-Boot, v2, 13/13] env: ti: Select dtb name for dra76x and am574   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoard   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoard   Tom Rini
• [U-Boot] DA850evm: Remove dead code   Tom Rini
• [U-Boot] [U-Boot, 1/1] fs: remove distractive message in fs_read()   Tom Rini
• [U-Boot] [U-Boot, 1/1] fs/fat: remove distractive message in file_fat_read_at()   Tom Rini
• [U-Boot] cmd: pmic: update help description   Tom Rini
• [U-Boot] GPIO: pca953x: Rework to not include commands in SPL   Tom Rini
• [U-Boot] GPIO: tca642x: Rework to not include commands in SPL   Tom Rini
• [U-Boot] [U-Boot, 1/1] board_r: remove superfluous #ifdef CONFIG_PRAM   Tom Rini
• [U-Boot] ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4   Tom Rini
• [U-Boot] rpi_0_w: Add configs consistent with RpI3   Tom Rini
• [U-Boot] arm: am33xx: security: Fix size calculation on header   Tom Rini
• [U-Boot] arm: mach-omap2: Remove secure certificate name printing   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] ARM: qemu-arm: Add support for AArch64   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] ARM: Document AArch64 version of qemu-arm   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] Travis-CI: Download ARM64 version of GRUB as well   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] Travis-CI: Add job for running test.py on qemu_arm64   Tom Rini
• [U-Boot] pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macros   Tom Rini
• [U-Boot] nds32: Drop unreferenced CONFIG_ADP_AG101P   Tom Rini
• [U-Boot] m68k: Drop unreferenced CONFIG_* defines   Tom Rini
• [U-Boot] [U-Boot, 1/2] serial: stm32: Rename serial_stm32x7.c to serial_stm32.c   Tom Rini
• [U-Boot] [U-Boot, 2/2] configs: stm32: move config flag from defconfig to Kconfig   Tom Rini
• [U-Boot] powerpc: Drop unreferenced CONFIG_* defines   Tom Rini
• [U-Boot] checkpatch: Ignore 'short' Kconfig help entries   Tom Rini
• [U-Boot] configs: keystone2: env: Fix burn_uboot_spi command   Tom Rini
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Tom Rini
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Mark Kettenis
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Nishanth Menon
• [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type   Bryan O'Donoghue
• [U-Boot] [PATCH v2 8/9] optee: Improve error printout   Bryan O'Donoghue
• [U-Boot] [PATCH v9 00/12] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 03/12] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 04/12] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 05/12] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v9 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 1/4] dm: spi: add BCM63xx HSSPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 2/4] mips: bmips: add bcm63xx-hsspi driver support for BCM6328   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 3/4] mips: bmips: add bcm63xx-hsspi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v6 4/4] mips: bmips: enable the SPI flash on the Comtrend AR-5387un   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Marek Vasut
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Marek Vasut
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] [PATCH 4/5] mmc: fsl_esdhc: support SDR104 and HS200   Peng Fan
• [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses   Alberto Sánchez Molero
• [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx   Gustavo A. R. Silva
• [U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Stefan Roese
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Michael Nazzareno Trimarchi
• [U-Boot] [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router   Kostya Porotchkin
• [U-Boot] [PATCH] spl: use different BOARD_INIT MACRO for spl and tpl   Kever Yang
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Marc Zyngier
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Marc Zyngier
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] mips: bmips: increment SYS_MALLOC_F_LEN   Álvaro Fernández Rojas
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Marc Zyngier
• [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/3] dm: cpu: bmips: add BCM6368 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family   Álvaro Fernández Rojas
• [U-Boot] [PATCH 3/3] MIPS: add BMIPS Comtrend WAP-5813n board   Álvaro Fernández Rojas
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Marc Zyngier
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate   Andreas Färber
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output   Andreas Färber
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Russell King
• [U-Boot] mrvl_uart.sh and Turris Omnia (was: [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router)   Andreas Färber
• [U-Boot] U-Boot, cache speculation side channel attacks and ARM   Marc Zyngier
• [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command   Heinrich Schuchardt
• [U-Boot] [PATCH] spl: use different BOARD_INIT MACRO for spl and tpl   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2 0/3] mips: bmips: add BCM6368 SoC support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6368 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Comtrend WAP-5813n board   Álvaro Fernández Rojas
• [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/4] dm: cpu: bmips: add BCM6318 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 2/4] dm: ram: bmips: add BCM6318 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family   Álvaro Fernández Rojas
• [U-Boot] [PATCH 4/4] MIPS: add BMIPS Comtrend AR-5315u board   Álvaro Fernández Rojas
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Sean Nyekjær
• [U-Boot] [RFC PATCH] SPL: allow fall-back to SDP boot   Eric Nelson
• [U-Boot] U-boot can verify an HW signature?   Breno Matheus Lima
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Chris Brandt
• [U-Boot] [PATCH v2] serial: sh: Add support for R7S72100 (RZ/A1)   Marek Vasut
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH 1/1] log: add category LOGC_EFI   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/4] mips: bmips: add BCM6318 SoC support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family   Álvaro Fernández Rojas
• [U-Boot] [PATCH v2 4/4] MIPS: add BMIPS Comtrend AR-5315u board   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/1] efi_selftest: reduce noise in test output for device trees   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: allow creation of more device part nodes   Heinrich Schuchardt
• [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M   Fabio Estevam
• [U-Boot] [PATCH 1/5] imx: mx7: change sdhc clk to 392M   Peng Fan
• [U-Boot] [PATCH 0/2] ARM: omap3: evm: Fix distro bootcmd   Derald D. Woods
• [U-Boot] [PATCH 1/2] distro bootcmd: Allow board defined UBI partition and volume names   Derald D. Woods
• [U-Boot] [PATCH 2/2] ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC support   Derald D. Woods
• [U-Boot] mrvl_uart.sh and Turris Omnia (was: [EXT] Re: [PATCH v4 0/6] Support for the Turris Omnia router)   Kostya Porotchkin
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output   Kostya Porotchkin
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate   Kostya Porotchkin
• [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang   Masahiro Yamada
• [U-Boot] [PATCH v3 1/6] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] libfdt: fix <linux/libfdt.h>   Masahiro Yamada
• [U-Boot] [PATCH v3 3/6] tools: include necessary headers explicitly   Masahiro Yamada
• [U-Boot] [PATCH v3 4/6] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h   Masahiro Yamada
• [U-Boot] [PATCH v3 5/6] libfdt: migrate libfdt.h to a wrapper + U-Boot own code   Masahiro Yamada
• [U-Boot] [PATCH v3 6/6] libfdt: migrate include/libfdt_env.h to a wrapper   Masahiro Yamada
• [U-Boot] [PATCH 4/4] armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs   Ashish Kumar
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: add strobe and tuning entry   Peng Fan
• [U-Boot] [PATCH V2 2/4] ARM: dts: add pinmux and tuning settings for HS200/SDR104   Peng Fan
• [U-Boot] [PATCH V2 3/4] mmc: fsl_esdhc: support SDR104 and HS200   Peng Fan
• [U-Boot] [PATCH V2 4/4] imx: mx7dsabresd: enable UHS and HS200   Peng Fan
• [U-Boot] UEFI on u-boot   Udit Kumar
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Andreas Färber
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Sean Nyekjær
• [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis   Stefan Roese
• [U-Boot] [PATCH V5 02/31] imx: add i.MX8M into Kconfig   Stefano Babic
• [U-Boot] [PATCH V5 04/31] imx: mx8m: add pin header file   Stefano Babic
• [U-Boot] [PATCH V5 03/31] imx: mx8m: add register definition header file   Stefano Babic
• [U-Boot] [RESEND PATCH v2 01/27] cfi_flash: Fix space between function name and parenthesis   Marek Vasut
• [U-Boot] [PATCH] powerpc: Drop CONFIG_WALNUT and other related dead code   Tuomas Tynkkynen
• [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver   Stefano Babic
• [U-Boot] [PATCH V5 08/31] imx: cpu: update cpu file to support i.MX8M   Stefano Babic
• [U-Boot] [PATCH V5 09/31] imx: spl: implement spl_boot_device for i.MX8M   Stefano Babic
• [U-Boot] [PATCH V5 10/31] imx: add i.MX8MQ SoC Revision and is_mx8m helper   Stefano Babic
• [U-Boot] [PATCH V5 11/31] imx: add pad settings bit definition for i.MX8M   Stefano Babic
• [U-Boot] [PATCH V5 12/31] imx: cpu: move speed/temp to common cpu   Stefano Babic
• [U-Boot] [PATCH V5 13/31] imx: cpu: add cpu speed/grade for i.MX8M   Stefano Babic
• [U-Boot] [PATCH V5 14/31] imx: refactor imx_get_mac_from_fuse   Stefano Babic
• [U-Boot] [PATCH V5 17/31] imx: mx7: move get_boot_device to cpu.c   Stefano Babic
• [U-Boot] [PATCH V5 18/31] imx: cpu: support get_boot_device for i.MX8M   Stefano Babic
• [U-Boot] [PATCH V5 25/31] gpio: mxc: add i.MX8M support   Stefano Babic
• [U-Boot] [PATCH V5 26/31] net: fec: do not access reserved register for i.MX8M   Stefano Babic
• [U-Boot] [PATCH v2 1/3] dm: cpu: bmips: add BCM6368 support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family   Daniel Schwierzeck
• [U-Boot] [PATCH v2 3/3] MIPS: add BMIPS Comtrend WAP-5813n board   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 3/4] MIPS: add support for Broadcom MIPS BCM6318 SoC family   Daniel Schwierzeck
• [U-Boot] [PATCH v2 4/4] MIPS: add BMIPS Comtrend AR-5315u board   Daniel Schwierzeck
• [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx   Marek Vasut
• [U-Boot] [PATCH] mips: bmips: increment SYS_MALLOC_F_LEN   Daniel Schwierzeck
• [U-Boot] [PATCH v2 2/4] dm: ram: bmips: add BCM6318 support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/4] dm: cpu: bmips: add BCM6318 support   Daniel Schwierzeck
• [U-Boot] [PATCH] doc: mxc_hab: Improve the config option list   Fabio Estevam
• [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB   codekipper at gmail.com
• [U-Boot] [PATCH v4 0/2] efi_loader: enable EFI driver provided block device   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/2] efi_driver: EFI block driver   Heinrich Schuchardt
• [U-Boot] [PATCH v4 2/2] efi_selftest: provide a test for block io   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: add missing LF in test output   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support   Simon Glass
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Glass
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Simon Glass
• [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode   Simon Glass
• [U-Boot] [PATCH v2 00/18] efi_loader: enable EFI driver provided block device   Simon Glass
• [U-Boot] [PATCH 1/1] log: add category LOGC_EFI   Simon Glass
• [U-Boot] [PATCH 1/1] dm: fix typo falback   Simon Glass
• [U-Boot] [PATCH v4] drivers: core: Add translation in live tree case   Simon Glass
• [U-Boot] [PATCH] patman: Unquote output from get_maintainer.pl   Simon Glass
• [U-Boot] [PATCH] dm: pinctrl: sync with Linux to use pin_config_param   Simon Glass
• [U-Boot] [RESEND PATCH v2 1/4] clk: clk-uclass: Fix style violations   Simon Glass
• [U-Boot] [RESEND PATCH v2 2/4] clk: clk_fixed_rate: Fix style violation   Simon Glass
• [U-Boot] [RESEND PATCH v2 3/4] clk: Remove superfluous gd declarations   Simon Glass
• [U-Boot] [RESEND PATCH v2 4/4] clk: Makefile: Sort entries alphabetically   Simon Glass
• [U-Boot] [RESEND PATCH v2 1/4] core: ofnode: Fix style violations   Simon Glass
• [U-Boot] [RESEND PATCH v2 2/4] core: read: Fix style violations   Simon Glass
• [U-Boot] [RESEND PATCH v2 4/4] core: Make device_is_compatible live-tree compatible   Simon Glass
• [U-Boot] [RESEND PATCH v2 2/2] lib: fdtdec: Fix some style violations   Simon Glass
• [U-Boot] [RESEND PATCH v2 1/2] lib: fdtdec: Fix whitespace style violations   Simon Glass
• [U-Boot] [RESEND PATCH v2 3/4] core: Add {ofnode, dev}_translate_address functions   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] usb: xhci: Fix bool initialization in xhci_bulk_tx   Gustavo A. R. Silva
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jaehoon Chung
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Vignesh R
• [U-Boot] [PATCH v9 00/12] mips: bmips: add SPI support   Jagan Teki
• [U-Boot] [PATCH 0/8] mmc: some fixes for core and add HS200 support for sdhci-cadence   Jaehoon Chung
• [U-Boot] [PATCH v6 0/4] mips: bmips: add HSSPI support   Jagan Teki
• [U-Boot] [PATCH] mmc: fix the wrong dislabing clock   Jaehoon Chung
• [U-Boot] [PATCH v2] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock   Jaehoon Chung
• [U-Boot] [PATCH V2 3/4] mmc: fsl_esdhc: support SDR104 and HS200   Jaehoon Chung
• [U-Boot] [PATCH V2 1/4] mmc: fsl_esdhc: add strobe and tuning entry   Jaehoon Chung
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Jagan Teki
• [U-Boot] [U-Boot, v6, 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [RESEND PATCH v2 1/8] spi: Fix style violation and improve code   Jagan Teki
• [U-Boot] [RESEND PATCH v2 2/8] spi: Remove obsolete spi_base_setup_slave_fdt   Jagan Teki
• [U-Boot] [RESEND PATCH v2 8/8] sf_probe: Merge spi_flash_probe_tail into spi_flash_probe   Jagan Teki
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v4 0/6] Support for the Turris Omnia router   Sean Nyekjær
• [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB   Maxime Ripard
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v2] spi: kirkwood_spi: implement workaround for FE-9144572   Jagan Teki
• [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [PATCH] sunxi: Fix display timing flags   Jagan Teki
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Maxime Ripard
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Maxime Ripard
• [U-Boot] [PATCH v3 1/2] arm: sunxi: Allwinner A10 SPI driver   Jagan Teki
• [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2   Jagan Teki
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Lothar Waßmann
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate   Stefan Roese
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output   Stefan Roese
• [U-Boot] [PATCH] sunxi: Add support for the Beelink-x2 STB   Maxime Ripard
• [U-Boot] [PATCH 1/2] serial: mxc: support DTE mode   Ryan Harkin
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Nuno Gonçalves
• [U-Boot] UDP packet sender   Gaëtan Carlier
• [U-Boot] [PATCH v4] spi: kirkwood_spi: implement workaround for FE-9144572   Chris Packham
• [U-Boot] [PATCH v4] spi: kirkwood_spi: implement workaround for FE-9144572   Jagan Teki
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Pankaj Bansal
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2] arm: add support for PDU001   Felix Brack
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jun Nie
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Marek Vasut
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Diego Dorta
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Goldschmidt
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   Tom Rini
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Goldschmidt
• [U-Boot] [PATCH] dm: spi: prevent setting a speed of 0 Hz   Simon Goldschmidt
• [U-Boot] [PATCH v4 1/2] efi_driver: EFI block driver   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command   Alexander Graf
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Stefano Babic
• [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type   Andrew F. Davis
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH v2] arm: add support for PDU001   Tom Rini
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Fabio Estevam
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Stefano Babic
• [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses   Robert Nelson
• [U-Boot] [PATCH v2] arm: add support for PDU001   Felix Brack
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Tom Rini
• [U-Boot] [PATCH v2] arm: add support for PDU001   Tom Rini
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Simon Glass
• [U-Boot] net: macb: Add support for Xilinx Zynq SoC   Joe Hershberger
• [U-Boot] net: Fix buffer overrun error in netconsole   Joe Hershberger
• [U-Boot] net: Remove nfs.h include from bootp.c   Joe Hershberger
• [U-Boot] net: phy: marvell: Add functions to read PHY's extended registers   Joe Hershberger
• [U-Boot] net: sh-eth: fix inl and outl definitions   Joe Hershberger
• [U-Boot] net: sh-eth: remove sh_eth_offset_rz table   Joe Hershberger
• [U-Boot] net: miiphybb: fix casting error   Joe Hershberger
• [U-Boot] net: mvneta - Fixed recv() when multiple packets have arrived.   Joe Hershberger
• [U-Boot] dm: core: add missing dev_count_phandle_with_args()   Joe Hershberger
• [U-Boot] net: designware: add clock support   Joe Hershberger
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] net: phy: Add Broadcom BCM53xx switch driver   Joe Hershberger
• [U-Boot] net: designware: Pad small packets   Joe Hershberger
• [U-Boot] net: phy: b53: Add b53_reg read/write commands   Joe Hershberger
• [U-Boot] configs: Update Lamobo_R1 with B53 switch options   Joe Hershberger
• [U-Boot] net: dhcp: Allow "MAY_FAIL" to still try each adapter   Joe Hershberger
• [U-Boot] net: sh-eth: Fix coding style checked by checkpatch.pl   Joe Hershberger
• [U-Boot] net: sh-eth: Remove bd_t from sh_eth_config()   Joe Hershberger
• [U-Boot] net: sh-eth: Change read/write() param to struct sh_eth_info   Joe Hershberger
• [U-Boot] net: sh-eth: Fix misaligned cache operation warning   Joe Hershberger
• [U-Boot] net: sh-eth: Add to Kconfig and convert   Joe Hershberger
• [U-Boot] phy: atheros: set auto-negotiation for AR8021   Joe Hershberger
• [U-Boot] u-boot-mmc fails on almost every Tegra board   Stephen Warren
• [U-Boot] [RFC] SPDX License text updates   Tom Rini
• [U-Boot] [PATCH v2 13/15] env: Mark env_get_location as weak   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] STM32F746 Discovery - No serial output?   Francois Dugast
• [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow   Paul Burton
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off   Eugeniy Paltsev
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Nuno Gonçalves
• [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command   Heinrich Schuchardt
• [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow   Daniel Schwierzeck
• [U-Boot] [PATCH] arm64 :show_regs: show the address before relocation   Karl Beldan
• [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI   Heinrich Schuchardt
• [U-Boot] [RFC] SPDX License text updates   Wolfgang Denk
• [U-Boot] [RFC] SPDX License text updates   Tom Rini
• [U-Boot] [PATCH] boston: Ensure DDR address calcuations don't overflow   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] Pull request: u-boot-spi/master   Álvaro Fernández Rojas
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: use built-in device tree in bootefi command   Alexander Graf
• [U-Boot] UDP packet sender   Lukasz Majewski
• [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Tom Rini
• [U-Boot] [RFC] SPDX License text updates   Lukasz Majewski
• [U-Boot] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig   Tom Rini
• [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Tom Rini
• [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Tom Rini
• [U-Boot] UDP packet sender   Joe Hershberger
• [U-Boot] [PATCH v2] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig   Derald D. Woods
• [U-Boot] UDP packet sender   Gaëtan Carlier
• [U-Boot] UDP packet sender   Joe Hershberger
• [U-Boot] ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATA   Tom Rini
• [U-Boot] [U-Boot, V2] Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_USB_MUSB_HCD et al to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_DAVINCI_SPI to Kconfig   Tom Rini
• [U-Boot] [U-Boot,1/3] Convert CONFIG_TWL4030_USB to Kconfig   Tom Rini
• [U-Boot] [U-Boot,2/3] Convert CONFIG_OMAP_USB_PHY to Kconfig   Tom Rini
• [U-Boot] [U-Boot, 3/3] Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig   Tom Rini
• [U-Boot] [U-Boot,1/5] fs: Migrate ext4 to Kconfig   Tom Rini
• [U-Boot] [U-Boot, 2/5] ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE   Tom Rini
• [U-Boot] [U-Boot,3/5] env: ENV_IS_IN_FAT improvements   Tom Rini
• [U-Boot] [U-Boot, 4/5] fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description   Tom Rini
• [U-Boot] [U-Boot,5/5] fs: fat: Drop CONFIG_SUPPORT_VFAT   Tom Rini
• [U-Boot] [U-Boot,V5] Convert CONFIG_SOC_DA8XX et al to Kconfig   Tom Rini
• [U-Boot] travis-ci: Add qemu-x86_64 target   Tom Rini
• [U-Boot] u-boot-mmc fails on almost every Tegra board   Jaehoon Chung
• [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off   Jaehoon Chung
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Jaehoon Chung
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jaehoon Chung
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Peng Fan
• [U-Boot] [PATCH] arm64 :show_regs: show the real hardware register even after relocation   Peng Fan
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jun Nie
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jaehoon Chung
• [U-Boot] travis-ci: Add qemu-x86_64 target   Tom Rini
• [U-Boot] u-boot-mmc fails on almost every Tegra board   Jaehoon Chung
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling   Jaehoon Chung
• [U-Boot] u-boot-mmc fails on almost every Tegra board   Jaehoon Chung
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Simon Goldschmidt
• [U-Boot] STM32F746 Discovery - No serial output?   Patrice CHOTARD
• [U-Boot] [PATCH v5 0/5] spi: cadence_spi: Adopt Linux DT bindings   Simon Goldschmidt
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jagan Teki
• [U-Boot] [PATCH V5 05/31] imx: mx8m: add clock driver   Peng Fan
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jagan Teki
• [U-Boot] [PATCH v5 1/5] spi: cadence_spi: Sync DT bindings with Linux   Jagan Teki
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] [PATCH v5 3/5] config: cadence_spi: Remove defines read from DT   Jagan Teki
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jagan Teki
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH v5 4/5] dts: k2g: Clean-up indentation   Jagan Teki
• [U-Boot] [PATCH v5 5/5] dts: cadence_spi: Update documentation for DT bindings   Jagan Teki
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jagan Teki
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Simon Goldschmidt
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jagan Teki
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Stefano Babic
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Michal Simek
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Jagan Teki
• [U-Boot] [RFC PATCH] mmc: Skipping the MMC initialization at the boot time   Jaehoon Chung
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Stefano Babic
• [U-Boot] [PATCH V4] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH v2 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PULL] efi patch queue 2018-01-23   Alexander Graf
• [U-Boot] [PATCH v3] arm: add support for PDU001   Felix Brack
• [U-Boot] Pull request: u-boot-spi/master   Daniel Schwierzeck
• [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND   Adam Ford
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Siva Durga Prasad Paladugu
• [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off   Eugeniy Paltsev
• [U-Boot] [PATCH] mx8mqevk: Update README with additional info   Diego Dorta
• [U-Boot] Wrong u-boot-mmc git URL   Guillaume Gardet
• [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling   Guillaume Gardet
• [U-Boot] [PATCH] mx8mqevk: Update README with additional info   Diego Dorta
• [U-Boot] UDP packet sender   Gaëtan Carlier
• [U-Boot] [PATCH] ARC: AXS10x: DTS: remove unused interrupts properties   Eugeniy Paltsev
• [U-Boot] [PATCH v2 6/9] tools: mkimage: add optee image type   Bryan O'Donoghue
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jagan Teki
• [U-Boot] Wrong u-boot-mmc git URL   Wolfgang Denk
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling   Anand Moon
• [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11   Anand Moon
• [U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5   Jernej Škrabec
• [U-Boot] [PATCH v3] arm: add support for PDU001   Tom Rini
• [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver   Anand Moon
• [U-Boot] [PATCH v2 2/2] mmc: Add bcm2835 sdhost controller   Alexander Graf
• [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator   Anand Moon
• [U-Boot] [PATCH v10 00/12] mips: bmips: add SPI support   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 01/12] wait_bit: add 8/16/32 BE/LE versions of wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 02/12] wait_bit: use wait_for_bit_le32 and remove wait_for_bit   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 03/12] drivers: spi: allow limiting reads   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 04/12] drivers: spi: consider command bytes when sending transfers   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 05/12] dm: spi: add BCM63xx SPI driver   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 06/12] mips: bmips: add bcm63xx-spi driver support for BCM6338   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 07/12] mips: bmips: add bcm63xx-spi driver support for BCM6348   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 08/12] mips: bmips: add bcm63xx-spi driver support for BCM6358   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 09/12] mips: bmips: add bcm63xx-spi driver support for BCM3380   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 10/12] mips: bmips: add bcm63xx-spi driver support for BCM63268   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704   Álvaro Fernández Rojas
• [U-Boot] [PATCH v10 12/12] mips: bmips: enable the SPI flash on the Netgear CG3100D   Álvaro Fernández Rojas
• [U-Boot] [PATCH v5 2/5] dts: cadence_spi: Sync DT bindings with Linux   Jagan Teki
• [U-Boot] [PATCH v3 0/2] Rpi: Add support for second sd host controller   Alexander Graf
• [U-Boot] [PATCH v3 1/2] bcm283x: Add pinctrl driver   Alexander Graf
• [U-Boot] [PATCH v3 2/2] mmc: Add bcm2835 sdhost controller   Alexander Graf
• [U-Boot] [PATCH v2 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi driver   Jagan Teki
• [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND   Andrew F. Davis
• [U-Boot] [PATCH v4] arm: add support for PDU001   Felix Brack
• [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND   Adam Ford
• [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND   Andrew F. Davis
• [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling   Stephen Warren
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Jagan Teki
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Chris Blake
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Jagan Teki
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Chris Blake
• [U-Boot] List of architectures no longer printed   Nathan Holder
• [U-Boot] List of architectures no longer printed   Wolfgang Denk
• [U-Boot] [PATCH v3 00/15] env: Multiple env support and env transition for sunxi   Maxime Ripard
• [U-Boot] [PATCH v3 01/15] cmd: nvedit: Get rid of the env lookup   Maxime Ripard
• [U-Boot] [PATCH v3 02/15] env: Rename env_driver_lookup_default and env_get_default_location   Maxime Ripard
• [U-Boot] [PATCH v3 03/15] env: Pass additional parameters to the env lookup function   Maxime Ripard
• [U-Boot] [PATCH v3 04/15] env: Make the env save message a bit more explicit   Maxime Ripard
• [U-Boot] [PATCH v3 05/15] env: Make it explicit where we're loading our environment from   Maxime Ripard
• [U-Boot] [PATCH v3 06/15] env: fat: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v3 07/15] env: mmc: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v3 08/15] env: common: Make the debug messages play a little nicer   Maxime Ripard
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   Maxime Ripard
• [U-Boot] [PATCH v3 10/15] env: Initialise all the environments   Maxime Ripard
• [U-Boot] [PATCH v3 11/15] env: mmc: depends on the MMC framework   Maxime Ripard
• [U-Boot] [PATCH v3 12/15] env: Allow to build multiple environments in Kconfig   Maxime Ripard
• [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH v3 14/15] sunxi: Transition from the MMC to a FAT-based environment   Maxime Ripard
• [U-Boot] [PATCH v3 15/15] env: sunxi: Enable FAT-based environment support by default   Maxime Ripard
• [U-Boot] [PATCH v3 0/9] Add new OPTEE bootm support to u-boot   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/9] optee: Add lib entries for sharing OPTEE code across ports   Bryan O'Donoghue
• [U-Boot] [PATCH v3 2/9] optee: Add CONFIG_OPTEE_TZDRAM_SIZE   Bryan O'Donoghue
• [U-Boot] [PATCH v3 3/9] optee: Add CONFIG_OPTEE_TZDRAM_BASE   Bryan O'Donoghue
• [U-Boot] [PATCH v3 4/9] optee: Add optee_image_get_entry_point()   Bryan O'Donoghue
• [U-Boot] [PATCH v3 5/9] optee: Add optee_image_get_load_addr()   Bryan O'Donoghue
• [U-Boot] [PATCH v3 6/9] tools: mkimage: add optee image type   Bryan O'Donoghue
• [U-Boot] [PATCH v3 7/9] optee: Add optee_verify_bootm_image()   Bryan O'Donoghue
• [U-Boot] [PATCH v3 8/9] optee: Add error printout   Bryan O'Donoghue
• [U-Boot] [PATCH v3 9/9] bootm: optee: Add mechanism to validate an OPTEE image before boot   Bryan O'Donoghue
• [U-Boot] [PATCH] arm64 :show_regs: show the real hardware register even after relocation   Karl Beldan
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [PATCH 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Bryan O'Donoghue
• [U-Boot] [PATCH 2/2] warp7 : run sec_init for CAAM RNG   Bryan O'Donoghue
• [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH 0/7] sun50i device tree changes   Samuel Holland
• [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check   Samuel Holland
• [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties   Samuel Holland
• [U-Boot] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   Samuel Holland
• [U-Boot] [PATCH 4/7] sun50i: a64: Update OrangePi Win defconfig and DTS   Samuel Holland
• [U-Boot] [PATCH 5/7] sun50i: h5: Clean up OrangePi PC 2 device tree   Samuel Holland
• [U-Boot] [PATCH 6/7] sun50i: h5: Enable remaining USB ports on OrangePi PC2   Samuel Holland
• [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus   Samuel Holland
• [U-Boot] extract size of FIT image   Bishop, Mark (STRT)
• [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.   Heinrich Schuchardt
• [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   Kyle Evans
• [U-Boot] extract size of FIT image   Anatolij Gustschin
• [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice   Alexander Graf
• [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings   Jason Rush
• [U-Boot] [PATCH v6 1/4] spi: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v6 2/4] dts: cadence_spi: Sync DT bindings with Linux   Jason Rush
• [U-Boot] [PATCH v6 3/4] config: cadence_spi: Remove defines read from DT   Jason Rush
• [U-Boot] [PATCH v6 4/4] dts: cadence_spi: Update documentation for DT bindings   Jason Rush
• [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice   Heinrich Schuchardt
• [U-Boot] [PATCH v4 13/18] efi_loader: fix StartImage bootservice   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.   Alexander Graf
• [U-Boot] Please pull u-boot-coldfire/master   Angelo Dureghello
• [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: always call Exit after an image returns.   Alexander Graf
• [U-Boot] [PATCH 0/8] Bring NAND support to Nintendo NES Classic   Miquel Raynal
• [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value   Miquel Raynal
• [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error   Miquel Raynal
• [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms   Miquel Raynal
• [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning   Miquel Raynal
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Miquel Raynal
• [U-Boot] [PATCH 6/8] configs: Add NAND support for NES Classic   Miquel Raynal
• [U-Boot] [PATCH 7/8] sunxi: dts: Add NAND node to sun8i DTSI   Miquel Raynal
• [U-Boot] [PATCH 8/8] sunxi: dts: Enable NAND on NES classic   Miquel Raynal
• [U-Boot] [PATCH] cmd: Kconfig: Make CMD_NAND select NAND   Adam Ford
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH V2] Convert CONFIG_CMD_NAND to Kconfig   Adam Ford
• [U-Boot] [PATCH V2] Convert CONFIG_CMD_NAND to Kconfig   Adam Ford
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Chee, Tien Fong
• [U-Boot] [PATCH v3 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Vignesh R
• [U-Boot] [PATCH v3 1/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible"   Vignesh R
• [U-Boot] [PATCH v3 2/3] Revert "spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possible"   Vignesh R
• [U-Boot] [PATCH v3 3/3] spi: cadence_qspi_apb: Make flash writes 32 bit aligned   Vignesh R
• [U-Boot] [PATCH v6 2/2] common: Generic firmware loader for file system   Simon Goldschmidt
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/3] power: regulator: s2mps11: add a regulator driver for s2mps11   Jaehoon Chung
• [U-Boot] [PATCH 2/3] power: pmic: s2mps11: probe the regulator driver   Jaehoon Chung
• [U-Boot] [PATCH 3/3] configs: odroid-xu3: enable the configs relevant to regulator   Jaehoon Chung
• [U-Boot] [PATCH] mmc: Poll for broken card detection case   Jaehoon Chung
• [U-Boot] [PATCH] mmc: fix to assign to corret clock value when clock is enabling   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] U-boot can verify an HW signature?   Saverio Mori
• [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value   Maxime Ripard
• [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error   Maxime Ripard
• [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms   Maxime Ripard
• [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning   Maxime Ripard
• [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value   Boris Brezillon
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Maxime Ripard
• [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning   Boris Brezillon
• [U-Boot] [PATCH 6/8] configs: Add NAND support for NES Classic   Maxime Ripard
• [U-Boot] [PATCH 7/8] sunxi: dts: Add NAND node to sun8i DTSI   Maxime Ripard
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Boris Brezillon
• [U-Boot] [PATCH 8/8] sunxi: dts: Enable NAND on NES classic   Boris Brezillon
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Boris Brezillon
• [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off   Jaehoon Chung
• [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   Maxime Ripard
• [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check   Maxime Ripard
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Maxime Ripard
• [U-Boot] [PATCH] arm: zynq: Remove ethernet alias for topic-miami   Michal Simek
• [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties   Maxime Ripard
• [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus   Maxime Ripard
• [U-Boot] [PATCH] am33xx: board: Call spl_early_init() to support sdram_init()   Faiz Abbas
• [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time   Jaehoon Chung
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Rasmus Villemoes
• [U-Boot] [PATCH 1/3] sunxi: remove allwinner prefix in pinctrl nodes   Nuno Goncalves
• [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5   Nuno Goncalves
• [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero   Nuno Goncalves
• [U-Boot] [PATCH 1/3] sunxi: remove allwinner prefix in pinctrl nodes   Maxime Ripard
• [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5   Maxime Ripard
• [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero   Maxime Ripard
• [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5   Nuno Gonçalves
• [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero   Nuno Gonçalves
• [U-Boot] [PATCH] am33xx: board: Call spl_early_init() to support sdram_init()   Lokesh Vutla
• [U-Boot] [PATCH 1/3] arm: zynq: Moved ethernet PHY configs of Zynq boards to defconfig   Michal Simek
• [U-Boot] [PATCH 2/3] microblaze: Moved ethernet PHY configs of Microblaze board to defconfig   Michal Simek
• [U-Boot] [PATCH 3/3] arm64: zynqmp: Moved ethernet PHY configs of ZynqMP boards to defconfig   Michal Simek
• [U-Boot] U-boot can verify an HW signature?   Breno Matheus Lima
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time   Anand Moon
• [U-Boot] [PATCH 0/9] log: Support control over the log output format   Simon Glass
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Auer, Lukas
• [U-Boot] [PATCH 7/7] sun50i: h5: Add support for the Orange Pi Zero Plus   Samuel Holland
• [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties   Samuel Holland
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Ryan Harkin
• [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check   Samuel Holland
• [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode   Goldschmidt Simon
• [U-Boot] [PATCH v3 11/15] env: mmc: depends on the MMC framework   Jaehoon Chung
• [U-Boot] [PATCH v3 07/15] env: mmc: Make the debug messages play a little nicer   Jaehoon Chung
• [U-Boot] [PATCH] Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig and add CONFIG_NAND   Adam Ford
• [U-Boot] [PATCH 1/2] efi: Conflict efi_loader with different stub bitness   Alexander Graf
• [U-Boot] [PATCH 2/2] efi_loader: Always use EFIAPI instead of asmlinkage   Alexander Graf
• [U-Boot] [PATCH] ddr: altera: silence PHY calibration unless in debug mode   Marek Vasut
• [U-Boot] [PATCH v2 2/2] efi_loader: Always use EFIAPI instead of asmlinkage   Alexander Graf
• [U-Boot] mmc: disable UHS modes if Vcc cannot be switched on and off   Eugeniy Paltsev
• [U-Boot] [PATCH] mtd: nand: Kconfig Setup missing NAND dependencies based on ARCH   Adam Ford
• [U-Boot] [PATCH 0/9] log: Support control over the log output format   Tom Rini
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] Manual is out of date, missing commands and information   Nathan Holder
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Fabio Estevam
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] Fix build of socfpga targets when CONFIG_SPL is not set (i.e., you do not want to generate preloader image)   Éric Hoffman
• [U-Boot] [PULL] efi patch queue 2018-01-23   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Fabio Estevam
• [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes   Jagan Teki
• [U-Boot] [PATCH] gpio: sunxi: Add compatible string for H5 PIO   Jagan Teki
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] Guide to hush shell in u-boot   Nathan Holder
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Fabio Estevam
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Fabio Estevam
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Auer, Lukas
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()   Alexey Brodkin
• [U-Boot] [PATCH] efi_loader: fix comments indent_string()   Heinrich Schuchardt
• [U-Boot] QSPI "sf probe ...", "sf read ..." on Altera SoC FPGA   Mr. goldenstreet
• [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/3] drivers/ddr/fsl: Fix DDR4 RDIMM support   York Sun
• [U-Boot] [PATCH v3 2/3] drivers/ddr/fsl: Fix workaround for A009803   York Sun
• [U-Boot] [PATCH v3 3/3] armv8: ls1046ardb: Add RDIMM support   York Sun
• [U-Boot] [PATCH v8 01/11] armv8: lsch3: Add serdes and DDR voltage setup   York Sun
• [U-Boot] [PATCH v2] ARM: dts: Freescale: re-license device tree files under GPLv2+/X11   York Sun
• [U-Boot] [PATCH] crypto/fsl: Fix HW accelerated hash commands   York Sun
• [U-Boot] [PATCH 1/2] fsl: common :qixis: Add ifc and emmc switching via qixis   York Sun
• [U-Boot] [PATCH 2/2] armv8: ls1088: Add ifc, emmc lbmap and rcw_src entry for ls1088   York Sun
• [U-Boot] [PATCH 1/1] efi_loader: catch misspelled bootefi subcommand   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [PATCH 1/5] Convert CONFIG_NAND_ATMEL et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 2/5] Convert CONFIG_SPL_FRAMEWORK to Kconfig   Adam Ford
• [U-Boot] [PATCH 3/5] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 4/5] Convert CONFIG_SPL_NAND_BASE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 5/5] Convert CONFIG_NAND_FSL_ELBC et al to Kconfig   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig   Adam Ford
• [U-Boot] [PATCH 1/2] ARM: dts: rmobile: Update DTS to match Linux 4.14   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: dts: rmobile: Factor out U-Boot extras   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig   Marek Vasut
• [U-Boot] [PATCH 1/2] serial: sh: Replace fdtdec_get_addr() with devfdt_get_addr()   Marek Vasut
• [U-Boot] [PATCH 2/2] serial: sh: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2   Marek Vasut
• [U-Boot] [PATCH 01/13] clk: renesas: Split RCar Gen3 driver   Marek Vasut
• [U-Boot] [PATCH 02/13] clk: renesas: Make clk_ids per-driver   Marek Vasut
• [U-Boot] [PATCH 03/13] clk: renesas: Make PLL configurations per-SoC   Marek Vasut
• [U-Boot] [PATCH 04/13] clk: renesas: Pull Gen3 specific bits into separate header   Marek Vasut
• [U-Boot] [PATCH 05/13] clk: renesas: Split SMSTPCR and RMSTPCR tables   Marek Vasut
• [U-Boot] [PATCH 06/13] clk: renesas: Make clock tables Kconfig configurable   Marek Vasut
• [U-Boot] [PATCH 07/13] clk: renesas: Split out code shared between Gen2 and Gen3   Marek Vasut
• [U-Boot] [PATCH 08/13] clk: renesas: Add DIV6P1 clock type   Marek Vasut
• [U-Boot] [PATCH 09/13] clk: renesas: Add Gen2 clock core   Marek Vasut
• [U-Boot] [PATCH 10/13] clk: renesas: Import R8A7790 H2 clock tables   Marek Vasut
• [U-Boot] [PATCH 11/13] clk: renesas: Import R8A7791/R8A7793 M2 clock tables   Marek Vasut
• [U-Boot] [PATCH 12/13] clk: renesas: Import R8A7792 V2H clock tables   Marek Vasut
• [U-Boot] [PATCH 13/13] clk: renesas: Import R8A7794 E2 clock tables   Marek Vasut
• [U-Boot] [PATCH 1/4] pinctrl: rmobile: Import R8A7790 H2 PFC tables   Marek Vasut
• [U-Boot] [PATCH 2/4] pinctrl: rmobile: Import R8A7791/R8A7793 M2 PFC tables   Marek Vasut
• [U-Boot] [PATCH 3/4] pinctrl: rmobile: Import R8A7792 V2H PFC tables   Marek Vasut
• [U-Boot] [PATCH 4/4] pinctrl: rmobile: Import R8A7794 E2 PFC tables   Marek Vasut
• [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2   Marek Vasut
• [U-Boot] [PATCH] gpio: rmobile: Add RCar Gen2 compatible string   Marek Vasut
• [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value   Miquel Raynal
• [U-Boot] [PATCH] pci: rmobile: Add RCar Gen2 PCIe controller driver   Marek Vasut
• [U-Boot] [PATCH] net: ravb: staticize ravb_start   Marek Vasut
• [U-Boot] [PATCH 1/7] net: sh_eth: Unify CONFIG_R8A779[01234] as CONFIG_RCAR_GEN2   Marek Vasut
• [U-Boot] [PATCH 2/7] net: sh_eth: Pass sh_eth_dev around   Marek Vasut
• [U-Boot] [PATCH 3/7] net: sh_eth: Split sh_eth_recv   Marek Vasut
• [U-Boot] [PATCH 4/7] net: sh_eth: Separate out MAC address programming   Marek Vasut
• [U-Boot] [PATCH 5/7] net: sh_eth: Split sh_eth_init   Marek Vasut
• [U-Boot] [PATCH 6/7] net: sh_eth: Clump legacy functions together   Marek Vasut
• [U-Boot] [PATCH 7/7] net: sh_eth: Add DM and DT support   Marek Vasut
• [U-Boot] [PATCH 1/8] mtd: nand: sunxi: Fix strength minimum value   Miquel Raynal
• [U-Boot] [PATCH 1/7] ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8   Marek Vasut
• [U-Boot] [PATCH 2/7] ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8   Marek Vasut
• [U-Boot] [PATCH 3/7] ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8   Marek Vasut
• [U-Boot] [PATCH 4/7] ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8   Marek Vasut
• [U-Boot] [PATCH 5/7] ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8   Marek Vasut
• [U-Boot] [PATCH 6/7] ARM: dts: rmobile: Add rudimentary R8A7790 Stout DT   Marek Vasut
• [U-Boot] [PATCH 7/7] ARM: dts: rmobile: Add SoC and board U-Boot DT extras   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Enable OF_CONTROL on RCar Gen2   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert R8A7791 Porter board to DM and DT   Marek Vasut
• [U-Boot] [PATCH 2/8] spl: nand: sunxi: Fix second case of modulo by zero error   Miquel Raynal
• [U-Boot] [PATCH 3/8] sunxi: Allow SPL to be compiled for sun8i platforms   Miquel Raynal
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Fabio Estevam
• [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   André Przywara
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Jaehoon Chung
• [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2   Jaehoon Chung
• [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()   Jaehoon Chung
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [GIT PULL] Please pull u-boot-mmc master   Tom Rini
• [U-Boot] [PATCH v4] arm: add support for PDU001   Tom Rini
• [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()   Tom Rini
• [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig   Jaehoon Chung
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [RESEND PATCH] ddr: altera: silence PHY calibration unless in debug mode   Goldschmidt Simon
• [U-Boot] [PATCH v2] arm: socfpga: allow configs without network support   Simon Goldschmidt
• [U-Boot] [PATCH 1/3] configs: trats2: enable the max77686 regulator config   Jaehoon Chung
• [U-Boot] [PATCH 2/3] power: pmic_max77686: remove the old pmic_max77686 file   Jaehoon Chung
• [U-Boot] [PATCH 3/3] lib: fdtdec: drop the old compatible about max77686   Jaehoon Chung
• [U-Boot] [PATCH v2 1/3] configs: trats2: enable the max77686 regulator config   Jaehoon Chung
• [U-Boot] [PATCH v2 2/3] power: pmic_max77686: remove the old pmic_max77686 file   Jaehoon Chung
• [U-Boot] [PATCH v2 3/3] lib: fdtdec: drop the old compatible about max77686   Jaehoon Chung
• [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   Maxime Ripard
• [U-Boot] [PATCH 2/3] sunxi: add DM I2C support for H3/H5   Maxime Ripard
• [U-Boot] [PATCH 3/3] sunxi: add I2C nodes present on Orange Pi >ero   Maxime Ripard
• [U-Boot] [PATCH 2/7] sun50i: a64: Fix USB clock/reset properties   Maxime Ripard
• [U-Boot] [RESEND PATCH] ddr: altera: silence PHY calibration unless in debug mode   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: allow configs without network support   Marek Vasut
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Auer, Lukas
• [U-Boot] [PATCH 1/3] configs: trats2: enable the max77686 regulator config   Lukasz Majewski
• [U-Boot] [PATCH 2/3] power: pmic_max77686: remove the old pmic_max77686 file   Lukasz Majewski
• [U-Boot] [PATCH v2 3/3] lib: fdtdec: drop the old compatible about max77686   Lukasz Majewski
• [U-Boot] [PATCH 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Lukasz Majewski
• [U-Boot] FW: u-boot v2016 vs v2013   Lukasz Majewski
• [U-Boot] spl: atf: pass NULL for bl32_ep pc   Philipp Tomsich
• [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets   Philipp Tomsich
• [U-Boot] [linux-sunxi] [PATCH 3/7] sun50i: a64: Move ethernet nodes to SoC DTS   Andre Przywara
• [U-Boot] spl: atf: pass NULL for bl32_ep pc   Philipp Tomsich
• [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 04/11] rockchip: rk322x: enable tpl support   Philipp Tomsich
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets   Philipp Tomsich
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Rasmus Villemoes
• [U-Boot] [U-Boot, v4, 07/11] spl: add support to booting with OP-TEE   Bryan O'Donoghue
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 1/7] mmc: uniphier-sd: Use mmc_of_parse()   Masahiro Yamada
• [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2   Masahiro Yamada
• [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Masahiro Yamada
• [U-Boot] [PATCH 3/7] mmc: uniphier-sd: Add Renesas RCar quirks   Masahiro Yamada
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Lukasz Majewski
• [U-Boot] [PATCH 4/7] mmc: uniphier-sd: Handle Renesas div-by-1   Masahiro Yamada
• [U-Boot] [PATCH] imx: mx25: Remove SION bit in all pin-mux   Benoît Thébaudeau
• [U-Boot] [PATCH 5/7] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support   Masahiro Yamada
• [U-Boot] [PATCH 6/7] mmc: uniphier-sd: Handle DMA completion flag differences   Masahiro Yamada
• [U-Boot] [PATCH 7/7] mmc: uniphier-sd: Always check controller version   Masahiro Yamada
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 01/24] mmc: omap_hsmmc: cleanup clock configuration   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 02/24] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 03/24] mmc: omap_hsmmc: add support to set default io voltage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 05/24] mmc: omap_hsmmc: Enable DDR mode support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 06/24] mmc: omap_hsmmc: Add tuning support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 07/24] mmc: omap_hsmmc: Workaround for errata id i802   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 08/24] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 10/24] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 11/24] mmc: omap_hsmmc: Add support to set IODELAY values   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 12/24] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 13/24] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 14/24] mmc: omap_hsmmc: update mmc->clock with the actual bus speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 15/24] mmc: omap_hsmmc: implement send_init_stream callback   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 16/24] mmc: omap_hsmmc: allow mmc clock to be gated   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 17/24] mmc: omap_hsmmc: add signal voltage selection support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 18/24] ARM: OMAP5: set mmc clock frequency to 192MHz   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 19/24] ARM: dts: DRA7: use new dra7-specific compatible string   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 20/24] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 21/24] dts: am57xx-beagle-x15: disable UHS and HS200 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 22/24] dts: am57xx-idk: disable HS200 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 23/24] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 24/24] configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 00/15] RPi: Properly handle dynamic serial configuration   Alexander Graf
• [U-Boot] [PATCH v3 01/15] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH v3 02/15] rpi: Remove runtime disabling support for serial   Alexander Graf
• [U-Boot] [PATCH v3 03/15] serial: bcm283x_mu: Remove support for post-init disabling   Alexander Graf
• [U-Boot] [PATCH v3 04/15] rpi: Determine PL011/Mini-UART availability at runtime   Alexander Graf
• [U-Boot] [PATCH v3 05/15] serial_bcm283x_mu: Convert to dev_read   Alexander Graf
• [U-Boot] [PATCH v3 06/15] serial_bcm283x_mu: Always skip init   Alexander Graf
• [U-Boot] [PATCH v3 07/15] serial_bcm283x_mu: Fail loading if not muxed   Alexander Graf
• [U-Boot] [PATCH v3 08/15] pl01x: Convert to dev_read   Alexander Graf
• [U-Boot] [PATCH v3 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig   Alexander Graf
• [U-Boot] [PATCH v3 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig   Alexander Graf
• [U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig   Alexander Graf
• [U-Boot] [PATCH v3 12/15] bcm2835_mu_serial: Convert to Kconfig   Alexander Graf
• [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership   Alexander Graf
• [U-Boot] [PATCH v3 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver   Alexander Graf
• [U-Boot] [PATCH v3 15/15] bcm2835_pinctrl: Probe pre-reloc   Alexander Graf
• [U-Boot] FW: u-boot v2016 vs v2013   Mehmet Ali İPİN
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jaehoon Chung
• [U-Boot] [PATCH] mmc: uniphier-sd: Add compatible strings for RCar Gen2   Marek Vasut
• [U-Boot] [PATCH] doc: mxc_hab: Improve the config option list   Breno Matheus Lima
• [U-Boot] FW: u-boot v2016 vs v2013   Fabio Estevam
• [U-Boot] [[PATCH v2] 1/8] sunxi: h3: Sync OTG and HCI nodes from Linux DT   Jagan Teki
• [U-Boot] [Patch] for drivers/net/phy/smsc.c to support SMSC LAN8741   Arno Steffens
• [U-Boot] [PATCH V2] imx: mx25: Remove SION bit in all pin-mux that are safe   Michael Trimarchi
• [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree   Alexey Brodkin
• [U-Boot] [PATCH V2] imx: mx25: Remove SION bit in all pin-mux that are safe   Fabio Estevam
• [U-Boot] [PATCH] arm: dts: imx6ull: move input include to base device tree   Stefan Agner
• [U-Boot] [[PATCH v2] 2/8] sunxi: musb: Add fifo config for H3   Jagan Teki
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Michael Trimarchi
• [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree   Jagan Teki
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Lukas Auer
• [U-Boot] btrfs: data abort with lzo compression (armv7/am335x)   Marek Behún
• [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses   Marek Behún
• [U-Boot] [PATCH] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig   Paul Kocialkowski
• [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings   Jason Rush
• [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings   Jagan Teki
• [U-Boot] [PATCH 7/7] powerpc/8xx: refactorise reginfo   Christophe Leroy
• [U-Boot] [PATCH] fs: btrfs: Fix unaligned memory accesses   Robert Nelson
• [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check   Maxime Ripard
• [U-Boot] [PATCH 1/7] sunxi: binman: Fix U-Boot binary size check   Samuel Holland
• [U-Boot] [PATCH] fdt: Implement weak arch_fixup_fdt()   Daniel Schwierzeck
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Bryan O'Donoghue
• [U-Boot] Pull request: u-boot-spi/master   Álvaro Fernández Rojas
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Bryan O'Donoghue
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Auer, Lukas
• [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree   Tom Rini
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Heinrich Schuchardt
• [U-Boot] [PATCH] common/memsize.c: restore content of the base address   Patrick DELAUNAY
• [U-Boot] [PATCH v2 0/2] common/memsize.c: restore content of the base address   Patrick Delaunay
• [U-Boot] [PATCH v2 1/2] common/memsize.c: prepare get_ram_size update   Patrick Delaunay
• [U-Boot] [PATCH v2 2/2] common/memsize.c: restore content of the base address   Patrick Delaunay
• [U-Boot] [PATCH 0/4] Add support for treating compiler warnings as errors   Daniel Schwierzeck
• [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler   Daniel Schwierzeck
• [U-Boot] [PATCH 2/4] buildman: add option -E for treating compiler warnings as errors   Daniel Schwierzeck
• [U-Boot] [PATCH 3/4] travis.yml: fix 'set +e' in build script   Daniel Schwierzeck
• [U-Boot] [PATCH 4/4] travis.yml: run buildman with option -E   Daniel Schwierzeck
• [U-Boot] [PATCH] dm: serial: Initialize serial console only when it wasn't already configured   Lukasz Majewski
• [U-Boot] [PATCH] Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig and add CONFIG_NAND   Christophe LEROY
• [U-Boot] [PATCH 0/5] clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates   Philipp Tomsich
• [U-Boot] [PATCH 1/5] clk: add clk_set_parent()   Philipp Tomsich
• [U-Boot] [PATCH 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()   Philipp Tomsich
• [U-Boot] [PATCH 3/5] rockchip: clk: rk3399: implement set_parent() operation   Philipp Tomsich
• [U-Boot] [PATCH 4/5] clk: implement clk_set_defaults()   Philipp Tomsich
• [U-Boot] [PATCH 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node   Philipp Tomsich
• [U-Boot] [PATCH] spl: add option to disable SPL banner output   Lukasz Majewski
• [U-Boot] [PATCH] spl: add option to disable SPL banner output   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2] spl: add option to disable SPL banner output   Lukasz Majewski
• [U-Boot] [PATCH] spl: add option to disable SPL banner output   Lukasz Majewski
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Alexander Graf
• [U-Boot] [PATCH] board_f: Only reserve memory for U-Boot if we're going to relocate   Alexey Brodkin
• [U-Boot] [PATCH] arc: Get rid of handwritten string routines   Alexey Brodkin
• [U-Boot] [PATCH] arc: Don't halt slaves   Alexey Brodkin
• [U-Boot] [PATCH] arc: Eliminate unused code and data with GCC's garbage collector   Alexey Brodkin
• [U-Boot] [PATCH] arc: Introduce a possibility to not relocate U-boot   Alexey Brodkin
• [U-Boot] [PATCH 1/1] Broadwell-DE Implementation   vnktux
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Duncan Hare
• [U-Boot] [PATCH] usb: ehci: mxs: fix swapped argument in ehci_writel()   Daniel Schwierzeck
• [U-Boot] [PATCH v2 0/5] clk: support assigned-clock, assigned-clock-parents, assigned-clock-rates   Philipp Tomsich
• [U-Boot] [PATCH v2 1/5] clk: add clk_set_parent()   Philipp Tomsich
• [U-Boot] [PATCH v2 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()   Philipp Tomsich
• [U-Boot] [PATCH v2 3/5] rockchip: clk: rk3399: implement set_parent() operation   Philipp Tomsich
• [U-Boot] [PATCH v2 4/5] clk: implement clk_set_defaults()   Philipp Tomsich
• [U-Boot] [PATCH v2 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node   Philipp Tomsich
• [U-Boot] [PATCH] omap3_logic: Clean up I2C pin muxing.   Adam Ford
• [U-Boot] SquashFS and FIT images   Bishop, Mark (STRT)
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] [RFC PATCH 0/2] ARM: v7: Enable basic framework for supporting bits for CVE-2017-5715   Nishanth Menon
• [U-Boot] [RFC PATCH 1/2] ARM: Introduce ability to enable ACR::IBE on Cortex-A8 for CVE-2017-5715   Nishanth Menon
• [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715   Nishanth Menon
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Benoît Thébaudeau
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Michael Nazzareno Trimarchi
• [U-Boot] SquashFS and FIT images   Mathew McBride
• [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning   Miquel Raynal
• [U-Boot] [PATCH 4/8] spl: nand: sunxi: Enhancements and cleaning   Miquel Raynal
• [U-Boot] [PATCH] efi_laoder: Call Exit() on return from payload in StartImage()   Alexander Graf
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Miquel Raynal
• [U-Boot] [PATCH 5/8] spl: nand: sunxi: use PIO instead of DMA   Miquel Raynal
• [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler   Masahiro Yamada
• [U-Boot] [PATCH] crypto/fsl: instantiate all rng state handles   Bryan O'Donoghue
• [U-Boot] [PATCH v2 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG   Bryan O'Donoghue
• [U-Boot] SquashFS and FIT images   Chris Packham
• [U-Boot] [PATCH 1/1] Broadwell-DE Implementation   Bin Meng
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Jaehoon Chung
• [U-Boot] [PATCH] efi_laoder: Call Exit() on return from payload in StartImage()   Heinrich Schuchardt
• [U-Boot] [U-Boot, v2, 1/2] spi: zynqmp_qspi: Add support for ZynqMP qspi drivers   Liam Beguin
• [U-Boot] [PATCH 1/1] vsprintf.c: correct printing of a NULL device path   Heinrich Schuchardt
• [U-Boot] [PATCH 1/9] drivers: net: pfe_eth: LS1012A PFE driver introduction   Calvin Johnson
• [U-Boot] [PATCH 1/1] efi_loader: do not install NULL as device path   Heinrich Schuchardt
• [U-Boot] [PATCH v8 2/2] DW SPI: Get clock value from Device Tree   Jagan Teki
• [U-Boot] [PATCH v6 0/4] spi: cadence_spi: Adopt Linux DT bindings   Jagan Teki
• [U-Boot] [PATCH v3 0/3] cadence-quadspi: Fix issues with non 32bit aligned accesses   Jagan Teki
• [U-Boot] [PATCH v10 00/12] mips: bmips: add SPI support   Jagan Teki
• [U-Boot] [PATCH 1/1] efi_loader: consistently use %pD to print device paths   Heinrich Schuchardt
• [U-Boot] Pull request v2: u-boot-spi/master   Jagan Teki
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Jaehoon Chung
• [U-Boot] [PATCH 5/7] powerpc/8xx: Change CONFIG_8xx to CONFIG_MPC8xx   Christophe Leroy
• [U-Boot] [PATCH] autoboot.c: Init SHA buffer size in passwd_abort   Martin Etnestad
• [U-Boot] [PATCH 1/7] soft_i2c: cleanup - no 8xx support   Christophe Leroy
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Michael Trimarchi
• [U-Boot] [PATCH 3/7] powerpc/8xx: cleaning up watchdog   Christophe Leroy
• [U-Boot] [PATCH 4/7] powerpc/8xx: get rid of get_immr()   Christophe Leroy
• [U-Boot] [PATCH v2 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Auer, Lukas
• [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG   Auer, Lukas
• [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715   Marc Zyngier
• [U-Boot] reading ubi from a NAND for programming to other devices   Lukasz Majewski
• [U-Boot] [PATCH 2/7] boards/MCR3000: cleanup config   Christophe Leroy
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Benoît Thébaudeau
• [U-Boot] [PATCH] dm: serial: Initialize serial console only when it wasn't already configured   Stefan Roese
• [U-Boot] [PATCH 1/3] mmc: add the MMC_CLK_ENABLE/DISABLE macro in mmc.h   Jaehoon Chung
• [U-Boot] [PATCH 2/3] mmc: add the debug message in mmc_set_clock   Jaehoon Chung
• [U-Boot] [PATCH 3/3] mmc: Kconfig: add the MMC_TRACE config in Kconfig   Jaehoon Chung
• [U-Boot] Antwort: [PATCH 3/5] Convert CONFIG_SPL_NAND_DRIVERS et al to Kconfig   Hannes Schmelzer
• [U-Boot] Antwort: [PATCH 4/5] Convert CONFIG_SPL_NAND_BASE et al to Kconfig   Hannes Schmelzer
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Benoît Thébaudeau
• [U-Boot] [PATCH 1/6] Add Broadwell-DE architecture cpu files   vnktux
• [U-Boot] [PATCH 2/6] Add Broadwell-DE include header files   vnktux
• [U-Boot] [PATCH 3/6] Implemented support for SPD memory file required by BDE FSP   vnktux
• [U-Boot] [PATCH 4/6] Add DTS for Broadwell-DE platform board   vnktux
• [U-Boot] [PATCH 5/6] Add Poseidon platform, based on BDE with memory down   vnktux
• [U-Boot] [PATCH 6/6] Updated Makefile and Kconfig in order to build BDE   vnktux
• [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG   Bryan O'Donoghue
• [U-Boot] [PATCH 0/4] mips: bmips: add BCM6318 SoC support   Daniel Schwierzeck
• [U-Boot] [PATCH 0/3] mips: bmips: add BCM6368 SoC support   Daniel Schwierzeck
• [U-Boot] [PATCH v3 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [PATCH v3 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Bryan O'Donoghue
• [U-Boot] [PATCH] samsung: board: init the s2mps11 pmic during booting time   Jaehoon Chung
• [U-Boot] [RESEND PATCH v3 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [RESEND PATCH v3 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Bryan O'Donoghue
• [U-Boot] [RESEND PATCH v3 2/2] imx: mx7: run sec_init for CAAM RNG   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/2] warp7 : run sec_init for CAAM RNG   Auer, Lukas
• [U-Boot] [PATCH 3/5] zynq: Support CPU info display   Michal Simek
• [U-Boot] [PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH 6/7] powerpc/8xx: get rid of the multiple PVR_ values   Christophe Leroy
• [U-Boot] [RFC PATCH] Allow providing default environment from file   Sean Nyekjaer
• [U-Boot] [PATCH 1/4] Kbuild: support W=[N, ]err for passing '-Werror' to the compiler   Daniel Schwierzeck
• [U-Boot] [PATCH v3 01/26] cfi_flash: Fix space between function name and parenthesis   Mario Six
• [U-Boot] [PATCH v3 02/26] cfi_flash: Fix style of pointer declarations   Mario Six
• [U-Boot] [PATCH v3 03/26] cfi_flash: Fix Parenthesis spacing   Mario Six
• [U-Boot] [PATCH v3 04/26] cfi_flash: Fix whitespace with casting   Mario Six
• [U-Boot] [PATCH v3 05/26] cfi_flash: Fix indent of case statements   Mario Six
• [U-Boot] [PATCH v3 06/26] cfi_flash: Fix spacing around casts/operators   Mario Six
• [U-Boot] [PATCH v3 07/26] cfi_flash: Fix missing/superfluous lines   Mario Six
• [U-Boot] [PATCH v3 08/26] cfi_flash: Remove braces for single-statement blocks   Mario Six
• [U-Boot] [PATCH v3 09/26] cfi_flash: Fix logical continuations   Mario Six
• [U-Boot] [PATCH v3 10/26] cfi_flash: Use __func__ macro instead of function name   Mario Six
• [U-Boot] [PATCH v3 11/26] cfi_flash: Fix comment style   Mario Six
• [U-Boot] [PATCH v3 12/26] cfi_flash: Remove unnecessary braces   Mario Six
• [U-Boot] [PATCH v3 13/26] cfi_flash: Add missing braces in blocks   Mario Six
• [U-Boot] [PATCH v3 14/26] cfi_flash: Fix spelling of "Unknown"   Mario Six
• [U-Boot] [PATCH v3 15/26] cfi_flash: Fix else after break   Mario Six
• [U-Boot] [PATCH v3 16/26] cfi_flash: Fix placement of brace   Mario Six
• [U-Boot] [PATCH v3 17/26] cfi_flash: Remove return from void function   Mario Six
• [U-Boot] [PATCH v3 18/26] cfi_flash: Remove assignments from if conditions   Mario Six
• [U-Boot] [PATCH v3 19/26] cfi_flash: Use u8 pointers instead of void pointers   Mario Six
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] [PATCH v3 20/26] cfi_flash: Fix strings split across lines   Mario Six
• [U-Boot] [PATCH v3 21/26] cfi_flash: Rename camel-case variables   Mario Six
• [U-Boot] [PATCH v3 22/26] flash: Fix spelling of "ERR_TIMOUT"   Mario Six
• [U-Boot] [PATCH v3 23/26] cfi_flash: Bound-check index before array access   Mario Six
• [U-Boot] [PATCH v3 24/26] cfi_flash: Fix long lines   Mario Six
• [U-Boot] [PATCH v3 25/26] cfi_flash: Fix indention   Mario Six
• [U-Boot] [PATCH v3 26/26] cfi_flash: Always define cfi_flash_num_flash_banks   Mario Six
• [U-Boot] [PATCH 1/7] soft_i2c: cleanup - no 8xx support   Christophe Leroy
• [U-Boot] [PATCH 2/7] boards/MCR3000: cleanup config   Christophe Leroy
• [U-Boot] [PATCH 3/7] powerpc/8xx: cleaning up watchdog   Christophe Leroy
• [U-Boot] [PATCH 4/7] powerpc/8xx: get rid of get_immr()   Christophe Leroy
• [U-Boot] [PATCH 5/7] powerpc/8xx: Change CONFIG_8xx to CONFIG_MPC8xx   Christophe Leroy
• [U-Boot] [PATCH 6/7] powerpc/8xx: get rid of the multiple PVR_ values   Christophe Leroy
• [U-Boot] [PATCH 7/7] powerpc/8xx: refactorise reginfo   Christophe Leroy
• [U-Boot] [PATCH 1/2] iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()   Eran Matityahu
• [U-Boot] [PATCH 2/2] i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro   Eran Matityahu
• [U-Boot] [PATCH v2 00/12] sunxi: arm64 binary size fixes   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device   Lukasz Majewski
• [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device   Marek Vasut
• [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI   Simon Glass
• [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang   Simon Glass
• [U-Boot] [PATCH v2 0/4] Add support for treating compiler warnings as errors   Daniel Schwierzeck
• [U-Boot] [PATCH v2 1/4] README: add doc for how to supply user specific compiler flags to Kbuild   Daniel Schwierzeck
• [U-Boot] [PATCH v2 2/4] buildman: add option -E for treating compiler warnings as errors   Daniel Schwierzeck
• [U-Boot] [PATCH v2 3/4] travis.yml: fix 'set +e' in build script   Daniel Schwierzeck
• [U-Boot] [PATCH v2 4/4] travis.yml: run buildman with option -E   Daniel Schwierzeck
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Duncan Hare
• [U-Boot] [RFC PATCH 2/2] ARM: Introduce ability to enable invalidate of BTB on Cortex-A15 for CVE-2017-5715   Nishanth Menon
• [U-Boot] [PATCH v2 3/4] travis.yml: fix 'set +e' in build script   Tom Rini
• [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device   Stefano Babic
• [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device   Marek Vasut
• [U-Boot] [PATCH] imx-common: spl: Allow booting from eMMC when SPL is loaded from non-eMMC device   Marek Vasut
• [U-Boot] [PATCH v4 0/2] Fix CAAM for TrustZone enable for warp7   Bryan O'Donoghue
• [U-Boot] [PATCH v4 1/2] drivers/crypto/fsl: assign job-rings to non-TrustZone   Bryan O'Donoghue
• [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG   Bryan O'Donoghue
• [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32   Tom Rini
• [U-Boot] How to build standalone app *outside* u-boot build tree   Brett Stahlman
• [U-Boot] [RESEND PATCH v3 2/2] imx: mx7: run sec_init for CAAM RNG   Auer, Lukas
• [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32   Marek Vasut
• [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG   Auer, Lukas
• [U-Boot] [PATCH v4 2/2] imx: mx7: run sec_init for CAAM RNG   Fabio Estevam
• [U-Boot] [RFC] i2c, omap24xx: Fixup High Speed Initialization   Adam Ford
• [U-Boot] Please pull u-boot-coldfire/master   Tom Rini
• [U-Boot] Pull request v2: u-boot-spi/master   Tom Rini
• [U-Boot] [PULL] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32   Tom Rini
• [U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32   Goldschmidt Simon
• [U-Boot] [PATCH v2 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: split README.efi into two separate documents   Heinrich Schuchardt
• [U-Boot] [PATCH 0/3] mips: bmips: add BCM6362 SoC support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 1/3] dm: cpu: bmips: add BCM6362 support   Álvaro Fernández Rojas
• [U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6362 SoC family   Álvaro Fernández Rojas
• [U-Boot] [PATCH 3/3] MIPS: add BMIPS Netgear DGND3700v2 board   Álvaro Fernández Rojas
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH 1/9] dm: core: Add a function to look up a uclass by name   Simon Glass
• [U-Boot] [PATCH 2/9] log: Add functions to convert IDs to/from names   Simon Glass
• [U-Boot] [PATCH 3/9] log: Add control over log formatting   Simon Glass
• [U-Boot] [PATCH 4/9] log: Update log_console to honour the log format   Simon Glass
• [U-Boot] [PATCH 5/9] log: Add a command to control the log output format   Simon Glass
• [U-Boot] [PATCH 6/9] log: Add a command to output a log record   Simon Glass
• [U-Boot] [PATCH 7/9] log: Add tests for the new log features   Simon Glass
• [U-Boot] [PATCH 8/9] log: Add documentation for commands and formatting   Simon Glass
• [U-Boot] [PATCH 9/9] log: Add a way to log error-return values   Simon Glass
• [U-Boot] [PATCH v2 1/1] log: add category LOGC_EFI   Simon Glass
• [U-Boot] [PATCH v2] sandbox: Add 64-bit sandbox   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] MIPS relocation DT error   Álvaro Fernández Rojas
• [U-Boot] MIPS relocation DT error   Álvaro Fernández Rojas
• [U-Boot] [PATCH] mips: bmips: select OF_EMBED for all boards   Álvaro Fernández Rojas
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Stefano Babic
• [U-Boot] [PATCH V3] imx: mx25: Remove SION bit in all pin-mux that are safe   Fabio Estevam
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] sunxi: Pine64: temporarily remove extra Pine64 non-plus DT   Andre Przywara
• [U-Boot] [PATCH] atomic-long: Fix warnings on arm64   Bradley Bolen
• [U-Boot] [PATCH 0/2] Android and arm64 improvement   Bin Chen
• [U-Boot] [PATCH 1/2] parse the second area of android image   Bin Chen
• [U-Boot] [PATCH 2/2] move booti_setup to arch/arm/lig/image.c   Bin Chen
• [U-Boot] sandbox and spi emulation (err=-19 Invalid bus 0 for spec)   Славкин Олег
• [U-Boot] standalone example on mips/ath79/QCA9558/Tp-Link Archer-c7   Arvid Picciani
• [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse   Jun Nie
• [U-Boot] [RFC v2] i2c, omap24xx: Fixup High Speed Initialization   Adam Ford
• [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse   André Przywara
• [U-Boot] [PATCH 1/2] fpga: Resync various CONFIG_FPGA_* symbols   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/2] cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGA   Tuomas Tynkkynen
• [U-Boot] [U-Boot, v3, 01/15] cmd: nvedit: Get rid of the env lookup   Tom Rini
• [U-Boot] [U-Boot, v3, 02/15] env: Rename env_driver_lookup_default and env_get_default_location   Tom Rini
• [U-Boot] [U-Boot, v3, 03/15] env: Pass additional parameters to the env lookup function   Tom Rini
• [U-Boot] [U-Boot, v3, 04/15] env: Make the env save message a bit more explicit   Tom Rini
• [U-Boot] [U-Boot, v3, 05/15] env: Make it explicit where we're loading our environment from   Tom Rini
• [U-Boot] [U-Boot, v3, 06/15] env: fat: Make the debug messages play a little nicer   Tom Rini
• [U-Boot] [U-Boot, v3, 07/15] env: mmc: Make the debug messages play a little nicer   Tom Rini
• [U-Boot] [U-Boot, v3, 08/15] env: common: Make the debug messages play a little nicer   Tom Rini
• [U-Boot] [U-Boot,v3,09/15] env: Support multiple environments   Tom Rini
• [U-Boot] [U-Boot, v3, 10/15] env: Initialise all the environments   Tom Rini
• [U-Boot] [U-Boot, v3, 11/15] env: mmc: depends on the MMC framework   Tom Rini
• [U-Boot] [U-Boot, v3, 12/15] env: Allow to build multiple environments in Kconfig   Tom Rini
• [U-Boot] [U-Boot,v3,13/15] env: Mark env_get_location as weak   Tom Rini
• [U-Boot] [U-Boot, v3, 14/15] sunxi: Transition from the MMC to a FAT-based environment   Tom Rini
• [U-Boot] [U-Boot, v3, 15/15] env: sunxi: Enable FAT-based environment support by default   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/rmobile-mx   Marek Vasut
• [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets   Tom Rini
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Tom Rini
• [U-Boot] [PATCH 3/4] fs: btrfs: Fix printf format character warning   Tom Rini
• [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()   Tom Rini
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Marek Vasut
• [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()   Marek Vasut
• [U-Boot] [PATCH 4/4] usb: ehci-mxs: Fix argument order for ehci_writel()   Tom Rini
• [U-Boot] Manual is out of date, missing commands and information   Wolfgang Denk
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Tom Rini
• [U-Boot] [PATCH] usb: Remove unused hcd_name variable   Tom Rini
• [U-Boot] Guide to hush shell in u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2 1/1] efi_loader: Call Exit() on return from payload in StartImage()   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: split README.efi into two separate documents   Alexander Graf
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Marek Vasut
• [U-Boot] [PATCH] usb: Remove unused hcd_name variable   Marek Vasut
• [U-Boot] [PATCH] x86: quark: Fix unused warnings   Tom Rini
• [U-Boot] [PATCH v2 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Alexander Graf
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Dr. Philipp Tomsich
• [U-Boot] [PATCH] usb: Remove isp116x-hcd support   Tom Rini
• [U-Boot] [PATCH] usb: host: Drop unused hcd_name from r8a66597-hcd.c   Tom Rini
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Marek Vasut
• [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang   Masahiro Yamada
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: enable HS200 support for uniphier_v8_defconfig   Masahiro Yamada
• [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function   Lukasz Majewski
• [U-Boot] u-boot mkimage tool generates wrong-endianness header when run on big endian, resulting in unbootable image   Justin Hibbits
• [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function   Marek Vasut
• [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function   Lukasz Majewski
• [U-Boot] [PATCH 3/4] fs: btrfs: Fix printf format character warning   Marek Behun
• [U-Boot] [PATCH v2 3/4] fs: btrfs: Fix printf format character warning   Tom Rini
• [U-Boot] Manual is out of date, missing commands and information   Nathan Holder
• [U-Boot] [PATCH v2 3/4] fs: btrfs: Fix printf format character warning   Marek Behun
• [U-Boot] Guide to hush shell in u-boot   Nathan Holder
• [U-Boot] [PATCH] usb: Remove isp116x-hcd support   Marek Vasut
• [U-Boot] [PATCH] usb: host: Drop unused hcd_name from r8a66597-hcd.c   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/rmobile-mx   Tom Rini
• [U-Boot] [GIT PULL] u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH] net: sun8i_emac: Fix PHY initialization   Samuel Holland
• [U-Boot] [[PATCH v2] 5/8] sunxi: musb: Enable OTG device clock for H3   Jagan Teki
• [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing   Jagan Teki
• [U-Boot] [PATCH] kconfig: revert change that was not needed for -Wformat-security   Masahiro Yamada
• [U-Boot] [PATCH 2/4] usb: gadget: dwc2: Fix warning over 32bit vs 64bit targets   Lukasz Majewski
• [U-Boot] [[PATCH v2] 6/8] sunxi: usb_phy: Clear PHYCTL register before writing   Jagan Teki
• [U-Boot] [PATCH] mmc: use pr_* log functions   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Masahiro Yamada
• [U-Boot] How to debug u-boot on arm board if nothing printed via uart?   kipade
• [U-Boot] How to debug u-boot on arm board if nothing printed via uart?   kipade
• [U-Boot] [PATCH] board: tbs2910: add private imx config   Soeren Moch
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Marek Vasut
• [U-Boot] [PATCH 1/1] efi_loader: add a README.iscsi describing booting via iSCSI   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Masahiro Yamada
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Marek Vasut
• [U-Boot] [PATCH 1/2] mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE   Fabio Estevam
• [U-Boot] [PATCH v3 0/6] assert() is almost used in the same way as BUG_ON(), except:   Tom Rini
• [U-Boot] spl: atf: pass NULL for bl32_ep pc   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 01/20] rockchip: dts: rk3399-evb: Change the tx/rx delay value for transmission quality   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 02/20] rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 03/20] rockchip: grf_rv1108.h: Fix the grf offsets   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 04/20] rockchip: pinctrl: rv1108: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 05/20] net: gmac_rockchip: Add support for the RV1108 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 06/20] rockchip: pinctrl: rk3328: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 07/20] rockchip: pinctrl: Add rk3328 gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 08/20] clk: rockchip: Add rk3328 gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 09/20] net: gmac_rockchip: Add rk3328 gmac support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 10/20] rockchip: configs: Enable GMAC configs for evb-rk3328   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 11/20] rockchip: dts: rk3328: Add gmac2io support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 12/20] rockchip: dts: rk3328-evb: Enable gmac2io for rk3328-evb   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 13/20] rockchip: pinctrl: rk322x: Move the iomux definitions into pinctrl-driver   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 14/20] rockchip: pinctrl: Add rk322x gmac pinctrl support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 15/20] clk: rockchip: Add rk322x gamc clock support   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 16/20] net: gmac_rockchip: Add support for the RK3228 GMAC   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 17/20] config: evb-rk3229: Enable rk gmac configs   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 18/20] ARM: dts: rk3288: Remove unused LCDC clock assigned   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"   Philipp Tomsich
• [U-Boot] [U-Boot, v3, 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"   Philipp Tomsich
• [U-Boot] rockchip: dts: rk3128: update pwm-cell for pwm0   Philipp Tomsich
• [U-Boot] rockchip: rk3036: enable rockusb support on rk3036 based device   Philipp Tomsich
• [U-Boot] [U-Boot,v2,1/5] clk: add clk_set_parent()   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 2/5] clk: refactor clk_get_by_index() into clk_get_by_indexed_prop()   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 3/5] rockchip: clk: rk3399: implement set_parent() operation   Philipp Tomsich
• [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()   Philipp Tomsich
• [U-Boot] [U-Boot, v2, 5/5] rockchip: clk: rk3399: accept all assigned-clocks from the 'cru'-node   Philipp Tomsich
• [U-Boot] [PATCH v3 00/30] musb: sunxi: Add OTG-Peripheral support for Allwineer H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 01/30] sunxi: h3: Sync OTG and HCI nodes from Linux DT   Jagan Teki
• [U-Boot] [PATCH v3 02/30] sunxi: musb: Add fifo config for H3   Jagan Teki
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 04/30] sunxi: musb: Hack dynamic fifo support for H3 OTG   Jagan Teki
• [U-Boot] [PATCH v3 05/30] sunxi: musb: Enable OTG device clock for H3   Jagan Teki
• [U-Boot] [PATCH v3 06/30] sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 07/30] sunxi: H3: set different otg base address per mode   Jagan Teki
• [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing   Jagan Teki
• [U-Boot] [PATCH v3 09/30] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v3 10/30] configs: bananapi-m2-plus: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v3 11/30] configs: sun50i: Drop CONFIG_USB_MAX_CONTROLLER_COUNT   Jagan Teki
• [U-Boot] [PATCH v3 12/30] msub: sunxi: Update proper fifo config for H5   Jagan Teki
• [U-Boot] [PATCH v3 13/30] configs: sun50i: Set proper USB PHY count for H5   Jagan Teki
• [U-Boot] [PATCH v3 14/30] sunxi: usb_phy: Fix phy_config to handle all SOC's   Jagan Teki
• [U-Boot] [PATCH v3 15/30] musb: sunxi: Add phy0 dual route support   Jagan Teki
• [U-Boot] [PATCH v3 16/30] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic   Jagan Teki
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Jagan Teki
• [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table   Jagan Teki
• [U-Boot] [PATCH v3 19/30] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v3 20/30] configs: orangepi-pc2: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v3 21/30] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux   Jagan Teki
• [U-Boot] [PATCH v3 22/30] configs: orangepi-prime: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v3 23/30] sunxi: clock: Fix clock gating for A64   Jagan Teki
• [U-Boot] [PATCH v3 24/30] configs: sun50i: Set proper USB PHY count for A64   Jagan Teki
• [U-Boot] [PATCH v3 25/30] musb: sunxi: Add support for A64   Jagan Teki
• [U-Boot] [PATCH v3 26/30] sunxi: usb_phy: Clear SIDDP for A64   Jagan Teki
• [U-Boot] [PATCH v3 27/30] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux   Jagan Teki
• [U-Boot] [PATCH v3 28/30] configs: bananapi-m64: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PATCH v3 29/30] arm64: allwinner: a64: olinuxino: Sync usb_otg from Linux   Jagan Teki
• [U-Boot] [PATCH v3 30/30] configs: a64-olinuxino: Enable USB OTG peripheral mode   Jagan Teki
• [U-Boot] [PULL] Please pull u-boot-rockchip   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Marek Vasut
• [U-Boot] [PATCH v3 02/30] sunxi: musb: Add fifo config for H3   Marek Vasut
• [U-Boot] [PATCH v3 05/30] sunxi: musb: Enable OTG device clock for H3   Marek Vasut
• [U-Boot] [PATCH v3 15/30] musb: sunxi: Add phy0 dual route support   Marek Vasut
• [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()   Michael Nazzareno Trimarchi
• [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()   Dr. Philipp Tomsich
• [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()   Michael Nazzareno Trimarchi
• [U-Boot] [U-Boot,v2,4/5] clk: implement clk_set_defaults()   Dr. Philipp Tomsich
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Marek Vasut
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] Initialize SHA buffer size var in passwd_abort   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 1/7] gpio: pca953x_gpio: Fix style violations   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 2/7] gpio: pca953x_gpio: Make live-tree compatible   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 3/7] gpio: mpc85xx_gpio: Fix style violations   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 4/7] gpio: mpc85xx: Rename driver file to mpc8xxx   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 5/7] gpio: mpc8xxx: Rename Kconfig option, structures, and functions   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 6/7] gpio: mpc8xxx: Make compatible with more SoCs   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 7/7] gpio: mpc8xxx: Make live-tree compatible   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 1/4] include: dm: Fix 'devioe'/'devuce' typos   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 2/4] serial: ns16550: Fix style violation   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 3/4] common: board_f: Fix style violations   Tom Rini
• [U-Boot] [U-Boot, RESEND, v2, 4/4] common: board_r: Fix style violations   Tom Rini
• [U-Boot] arm: mach-omap2: Pass args to secure ROM in SRAM in SPL   Tom Rini
• [U-Boot] arm: bootm-fdt.c: fix compiler warning   Tom Rini
• [U-Boot] [U-Boot, 1/6] ARM: dts: stm32: add "u-boot, dm-pre-reloc" for clk_hse in stm32f7-u-boot   Tom Rini
• [U-Boot] [U-Boot, 2/6] clk: stm32: retrieve external oscillator frequency from DT   Tom Rini
• [U-Boot] [U-Boot, 3/6] configs: stm32f: Remove STM32_HSE_HZ for all STM32F series   Tom Rini
• [U-Boot] [U-Boot, 4/6] board: stm32: Add stm32f429-evaluation board support   Tom Rini
• [U-Boot] [U-Boot, 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support   Tom Rini
• [U-Boot] [U-Boot, 6/6] ARM: dts: stm32: add stm32429-eval-u-boot dts file   Tom Rini
• [U-Boot] atomic-long: Fix warnings on arm64   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] ARM: dts: stm32: Add STMMAC clocks for stm32f746   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] clk: clk_stm32f: Remove STMMAC clock setup   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] clk: clk_stm32f: Move SYSCFG clock setup into configure_clocks()   Tom Rini
• [U-Boot] tools: remove unused ret   Tom Rini
• [U-Boot] [U-Boot, 1/2] configs: Replace CONFIG_ISW_ENTRY_ADDR with CONFIG_SYS_TEXT_BASE   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: AM43XX: Call hw_data_init() again after relocation to update *ctrl   Tom Rini
• [U-Boot] clk: clk_stm32f: Fix PLLSAICFGR_PLLSAIP_4 divider value   Tom Rini
• [U-Boot] fs: btrfs: Fix unaligned memory accesses   Tom Rini
• [U-Boot] spl: use different BOARD_INIT MACRO for spl and tpl   Tom Rini
• [U-Boot] [U-Boot, 1/2] distro bootcmd: Allow board defined UBI partition and volume names   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: omap3: evm: Fix distro bootcmd UBIFS and MMC support   Tom Rini
• [U-Boot] host-tools: use python2 explicitly for shebang   Tom Rini
• [U-Boot] [U-Boot, v3, 1/6] libfdt: migrate fdt_rw.c to a wrapper of scripts/dtc/libfdt/fdt_rw.c   Tom Rini
• [U-Boot] [U-Boot,v3,2/6] libfdt: fix <linux/libfdt.h>   Tom Rini
• [U-Boot] [U-Boot, v3, 3/6] tools: include necessary headers explicitly   Tom Rini
• [U-Boot] [U-Boot, v3, 4/6] libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h   Tom Rini
• [U-Boot] [U-Boot, v3, 5/6] libfdt: migrate libfdt.h to a wrapper + U-Boot own code   Tom Rini
• [U-Boot] [U-Boot, v3, 6/6] libfdt: migrate include/libfdt_env.h to a wrapper   Tom Rini
• [U-Boot] powerpc: Drop CONFIG_WALNUT and other related dead code   Tom Rini
• [U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver   Tom Rini
• [U-Boot] [U-Boot,v3,2/2] mmc: Add bcm2835 sdhost controller   Tom Rini
• [U-Boot] [U-Boot,v4] arm: add support for PDU001   Tom Rini
• [U-Boot] am33xx: board: Call spl_early_init() to support sdram_init()   Tom Rini
• [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails   Tom Rini
• [U-Boot] [U-Boot, v3, 02/15] rpi: Remove runtime disabling support for serial   Tom Rini
• [U-Boot] [U-Boot, v3, 03/15] serial: bcm283x_mu: Remove support for post-init disabling   Tom Rini
• [U-Boot] [U-Boot, v3, 04/15] rpi: Determine PL011/Mini-UART availability at runtime   Tom Rini
• [U-Boot] [U-Boot, v3, 05/15] serial_bcm283x_mu: Convert to dev_read   Tom Rini
• [U-Boot] [U-Boot,v3,06/15] serial_bcm283x_mu: Always skip init   Tom Rini
• [U-Boot] [U-Boot, v3, 07/15] serial_bcm283x_mu: Fail loading if not muxed   Tom Rini
• [U-Boot] [U-Boot,v3,08/15] pl01x: Convert to dev_read   Tom Rini
• [U-Boot] [U-Boot, v3, 09/15] pl010: Convert CONFIG_PL010_SERIAL to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 10/15] pl011: Convert CONFIG_PL011_SERIAL to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 11/15] pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 12/15] bcm2835_mu_serial: Convert to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 13/15] MAINTAINERS: Take over BCM2835 maintainership   Tom Rini
• [U-Boot] [U-Boot, v3, 14/15] bcm2835_pl011_serial: Add BCM2835 specific serial driver   Tom Rini
• [U-Boot] [U-Boot,v3,15/15] bcm2835_pinctrl: Probe pre-reloc   Tom Rini
• [U-Boot] [U-Boot, v2] spl: add option to disable SPL banner output   Tom Rini
• [U-Boot] omap3_logic: Clean up I2C pin muxing.   Tom Rini
• [U-Boot] [PATCH] git_meg_1   DH at synoia.com
• [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support   Heinrich Schuchardt
• [U-Boot] Guide to hush shell in u-boot   Lukasz Majewski
• [U-Boot] [PATCH] mmc: use pr_* log functions   Lukasz Majewski
• [U-Boot] How to debug u-boot on arm board if nothing printed via uart?   Lukasz Majewski
• [U-Boot] [PULL] efi patch queue 2018-01-28   Alexander Graf
• [U-Boot] Manual is out of date, missing commands and information   Wolfgang Denk
• [U-Boot] Guide to hush shell in u-boot   Wolfgang Denk
• [U-Boot] [PULL] Please pull u-boot-rockchip   Tom Rini
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Heinrich Schuchardt
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Andre Przywara
• [U-Boot] [PATCH 1/3] sunxi: gpio: add missing compatible strings   Andre Przywara
• [U-Boot] [PATCH 2/3] net: sun8i-emac: support new pinctrl DT bindings   Andre Przywara
• [U-Boot] [PATCH 3/3] net: sun8i-emac: add support for new EMAC DT binding   Andre Przywara
• [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3   Duncan Hare
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Jaehoon Chung
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] mx6sabre_common: Allow building CONFIG_USB_FUNCTION_MASS_STORAGE   Shawn Guo
• [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3   Heinrich Schuchardt
• [U-Boot] [PULL] efi patch queue 2018-01-28   Tom Rini
• [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails   Derald D. Woods
• [U-Boot] [PATCH] TCP and wget implementation. Patch V5, 3 of 3.   DH at synoia.com
• [U-Boot] [BUG] 0001-mmc-fix-the-wrong-disabling-clock.patch   Jaehoon Chung
• [U-Boot] [PATCH 2/3] mmc: add the debug message in mmc_set_clock   Jaehoon Chung
• [U-Boot] [PATCH] TCP and wget implementation. Patch V5, 3 of 3.   Calvin Johnson
• [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang   Simon Glass
• [U-Boot] [PATCH v2 1/1] dm: video: Correct color ANSI escape sequence support   Simon Glass
• [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jaehoon Chung
• [U-Boot] [PATCH] host-tools: use python2 explicitly for shebang   Masahiro Yamada
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Lokesh Vutla
• [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time   Jaehoon Chung
• [U-Boot] [PATCH] mmc: use pr_* log functions   Jaehoon Chung
• [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")   Simon Goldschmidt
• [U-Boot] [RESEND PATCH] armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs   Ashish Kumar
• [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets   Stefan Roese
• [U-Boot] [PATCH v1] EHCI: Fix endian access issue on EHCI intinalization   yinbo.zhu at nxp.com
• [U-Boot] [PATCH v3 0/4] dm: video: Correct color ANSI escape sequence support   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/4] dm: video: show correct colors in graphical console   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/4] dm: video: correctly clean background in 16bit mode   Heinrich Schuchardt
• [U-Boot] [PATCH v3 3/4] dm: video: use constants to refer to colors   Heinrich Schuchardt
• [U-Boot] [PATCH v3 4/4] dm: video: support increased intensity (bold)   Heinrich Schuchardt
• [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse   Jun Nie
• [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse   Calvin Johnson
• [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing   Maxime Ripard
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Maxime Ripard
• [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table   Maxime Ripard
• [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing   Jagan Teki
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Jagan Teki
• [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table   Jagan Teki
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Maxime Ripard
• [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time   Lukasz Majewski
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Andre Przywara
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Chen-Yu Tsai
• [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
• [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Maxime Ripard
• [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")   Marek Vasut
• [U-Boot] [PATCH] sunxi: Pine64: temporarily remove extra Pine64 non-plus DT   Maxime Ripard
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Andre Przywara
• [U-Boot] [PATCH] sunxi: support fuse cmd to read/write fuse   Maxime Ripard
• [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")   Simon Goldschmidt
• [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")   Marek Vasut
• [U-Boot] [PATCH 1/1] arm: socfpga: fix qspi flash compatible (add "spi-flash")   Simon Goldschmidt
• [U-Boot] [PATCH v3 01/26] cfi_flash: Fix space between function name and parenthesis   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Fix minicom baudrate   Stefan Roese
• [U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH] board: stm32: Fix stm32f746-disco boot   patrice.chotard at st.com
• [U-Boot] [PATCH] serial: Make full device search optional   Alexander Graf
• [U-Boot] [PATCH v3 08/30] sunxi: usb_phy: Clear PHYCTL register before writing   Maxime Ripard
• [U-Boot] [PATCH] mx6sabresd: Add fastboot support   Fabio Estevam
• [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jaehoon Chung
• [U-Boot] [PATCH] serial: Make full device search optional   Derald Woods
• [U-Boot] Uboot as x86_64 EFI payload   Juan Alfonso Reyes Ajenjo
• [U-Boot] [PATCH] mx6sabresd: Add fastboot support   Shawn Guo
• [U-Boot] [PATCH] mx6sabresd: Add fastboot support   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 1/4] mtd: nand: mxs_nand: use self init   Stefan Agner
• [U-Boot] [PATCH 2/4] mtd: nand: mxs_nand: allow to enable BBT support   Stefan Agner
• [U-Boot] [PATCH 3/4] mtd: nand: mxs_nand: use structure for BCH geometry   Stefan Agner
• [U-Boot] [PATCH 4/4] mtd: nand: mxs_nand: add minimal ECC support   Stefan Agner
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Marek Vasut
• [U-Boot] Uboot as x86_64 EFI payload   Javier Santos Romo
• [U-Boot] Please pull u-boot-cfi-flash/master   Tom Rini
• [U-Boot] [PATCH] serial: Make full device search optional   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Jagan Teki
• [U-Boot] [PATCH v3 03/30] sunxi: Fix USB PHY index for H3/H5/A64   Marek Vasut
• [U-Boot] [PATCH] clk: clk_stm32: Add .set_rate callback   patrice.chotard at st.com
• [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3   Duncan Hare
• [U-Boot] [PATCH v4 1/8] drivers/ddr/fsl: Fix DDR4 RDIMM support   York Sun
• [U-Boot] [PATCH v4 2/8] drivers/ddr/fsl: Fix workaround for A009803   York Sun
• [U-Boot] [PATCH v4 3/8] drivers/ddr/fsl: Add 3DS RDIMM support   York Sun
• [U-Boot] [PATCH v4 4/8] drivers/ddr/fsl: Add calculation of register control words   York Sun
• [U-Boot] [PATCH v4 5/8] drivers/ddr/fsl: Modify binding registers to save time on data init   York Sun
• [U-Boot] [PATCH v4 6/8] drivers/ddr/fsl: Cleanup unused variable   York Sun
• [U-Boot] [PATCH v4 7/8] armv8: ls1046ardb: Add RDIMM support   York Sun
• [U-Boot] [PATCH v4 8/8] armv8: ls2088ardb: Add 3DS RDIMM support   York Sun
• [U-Boot] [PATCH] git_meg_1   Joe Hershberger
• [U-Boot] [PATCH 1/4] mvpp2: Fix warning over 32bit vs 64bit targets   Joe Hershberger
• [U-Boot] [PATCH] TCP and wget implementation. Ptch V5 1 of 3   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries   Lukasz Majewski
• [U-Boot] [PATCH v5 4/8] drivers/ddr/fsl: Add calculation of register control words   York Sun
• [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig   Lukasz Majewski
• [U-Boot] [PATCH 4/4] usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command   Lukasz Majewski
• [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig   Lukasz Majewski
• [U-Boot] [PATCH] Kconfig: usb: rockchip: Remove not needed *_defconfig USB/gadget entries   Lukasz Majewski
• [U-Boot] [PATCH] part: Allocate only one legacy_mbr buffer   Alexey Brodkin
• [U-Boot] aes: Allow non-zero initialization vector   Tom Rini
• [U-Boot] spl: include timezone in banner   Tom Rini
• [U-Boot] [U-Boot, 1/4] mvpp2: Fix warning over 32bit vs 64bit targets   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] fs: btrfs: Fix printf format character warning   Tom Rini
• [U-Boot] kconfig: revert change that was not needed for -Wformat-security   Tom Rini
• [U-Boot] board: stm32: Fix stm32f746-disco boot   Tom Rini
• [U-Boot] clk: clk_stm32: Add .set_rate callback   Tom Rini
• [U-Boot] [PATCH V2 2/7] mmc: uniphier-sd: Properly handle pin voltage configuration   Marek Vasut
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   York Sun
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support   York Sun
• [U-Boot] [U-Boot, v3, 01/15] serial: Use next serial device if probing fails   Alexander Graf
• [U-Boot] [PATCH] serial: Make full device search optional   Derald D. Woods
• [U-Boot] Subject: [PATCH 2/3] TCP and wget implementation. Patch V5, 2 of 3.   Duncan Hare
• [U-Boot] [ANN] U-Boot v2018.03-rc1 released   Tom Rini
• [U-Boot] [PATCH] mx6sabresd: Add fastboot support   Shawn Guo
• [U-Boot] AM3703 does not boot from MicroSD card   phantom0
• [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries   Masahiro Yamada
• [U-Boot] [PATCH] Fix FreeBSD endian checks   Justin Hibbits
• [U-Boot] [PATCH] mmc: synchronize the sequence with enum bus_mode in mmc.h   Jaehoon Chung
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jaehoon Chung
• [U-Boot] [PATCH v2] samsung: board: init the s2mps11 pmic during booting time   Jaehoon Chung
• [U-Boot] [PATCH] net/phy/cortina.c: Update get_phy_id implementation   Priyanka Jain
• [U-Boot] [PATCH v3 2/6] usb: xhci: return ERR_PTR(-ETIMEDOUT) at the end of xhci_wait_for_event()   Bin Meng
• [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86   Bin Meng
• [U-Boot] [PATCH] x86: quark: Fix unused warnings   Bin Meng
• [U-Boot] [PATCH] net/phy/cortina: Add No firmware upload option   Priyanka Jain
• [U-Boot] [PATCH 1/1] efi_loader: remove deprecated ConsoleControlProtocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] cmd/bdinfo: print relocation info on X86   Bin Meng
• [U-Boot] [PATCH] x86: quark: Fix unused warnings   Bin Meng
• [U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2   Stefan Mavrodiev
• [U-Boot] Raspberry Pi USB storage broken after 64 byte device descriptor patch   Kristian Amlie
• [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig   Michal Simek
• [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig   Maxime Ripard
• [U-Boot] [PATCH] env: sf: fix return value of env_sf_load   Simon Goldschmidt
• [U-Boot] board: stm32: Fix stm32f746-disco boot   Patrice CHOTARD
• [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak   Simon Goldschmidt
• [U-Boot] [PATCH] env: sf: fix return value of env_sf_load   Simon Goldschmidt
• [U-Boot] [PATCH v3 13/15] env: Mark env_get_location as weak   Maxime Ripard
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   Simon Goldschmidt
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Maxime Ripard
• [U-Boot] [PATCH v3 18/30] sunxi: Add uENV partition on gpt partition table   Maxime Ripard
• [U-Boot] FEC Clock   Mehmet Ali İPİN
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Jagan Teki
• [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig   Jaehoon Chung
• [U-Boot] [PATCH 4/4] usb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE when enabling 'ums' command   Jaehoon Chung
• [U-Boot] [PATCH 1/4] Kconfig: usb: Sort USB_FUNCTION_* entries   Lukasz Majewski
• [U-Boot] [PATCH 2/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig   Jaehoon Chung
• [U-Boot] [PATCH 3/4] Kconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE to Kconfig   Lukasz Majewski
• [U-Boot] [PATCH] serial: Make full device search optional   Alexander Graf
• [U-Boot] [PATCH 1/4] mtd: nand: mxs_nand: use self init   stefan at agner.ch
• [U-Boot] [PATCH v3] armv8: Remove dependency of SERDES for LSCH2 and LSCH3   Sriram Dash
• [U-Boot] [PATCH] fdt: Fixup only valid memory banks   Thierry Reding
• [U-Boot] [PATCH v7 0/3] Generic firmware loader   tien.fong.chee at intel.com
• [U-Boot] [PATCH v7 1/3] spl: Remove static declaration on spl_mmc_find_device function   tien.fong.chee at intel.com
• [U-Boot] [PATCH v7 2/3] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()   tien.fong.chee at intel.com
• [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system   tien.fong.chee at intel.com
• [U-Boot] [PATCH] fdt: Fixup only valid memory banks   Lothar Waßmann
• [U-Boot] [PATCH] fdt: Fixup only valid memory banks   Thierry Reding
• [U-Boot] [PATCH v7 2/3] cmd: ubifs: Move ubifs_initialized checking into cmd_ubifs_umount()   Marek Vasut
• [U-Boot] [PATCH v7 3/3] common: Generic firmware loader for file system   Marek Vasut
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Bin Meng
• [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'   Ulf Magnusson
• [U-Boot] [PATCH 1/2] x86: acpi: Use an API to get the ACPI RSDP table address   Bin Meng
• [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()   Bin Meng
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Ulf Magnusson
• [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'   Bin Meng
• [U-Boot] [PATCH] am335x, shc: kconfig: Fix misspelled choice default   Ulf Magnusson
• [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()   Andy Shevchenko
• [U-Boot] [PATCH] usb: ulpi: kconfig: Remove meaningless choice default   Ulf Magnusson
• [U-Boot] [PATCH] serial: Make full device search optional   Derald Woods
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Michal Simek
• [U-Boot] [PATCH v2 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
• [U-Boot] [PATCH] serial: Make full device search optional   Alexander Graf
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Ulf Magnusson
• [U-Boot] [PATCH v2 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jean-Jacques Hiblot
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Ulf Magnusson
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Fix misspelled choice default   Ulf Magnusson
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   Ashish Kumar
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH 1/2] x86: acpi: Use an API to get the ACPI RSDP table address   Bin Meng
• [U-Boot] [PATCH 2/2] x86: qemu: qfw: Implement acpi_get_rsdp_addr()   Bin Meng
• [U-Boot] [PATCH] x86: kconfig: Remove meaningless 'select n'   Bin Meng
• [U-Boot] [PATCH v3 00/24] omap_hsmmc: Add support for HS200 and UHS modes   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 01/24] mmc: omap_hsmmc: cleanup clock configuration   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 02/24] mmc: omap_hsmmc: cleanup omap_hsmmc_set_ios   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 03/24] mmc: omap_hsmmc: add support to set default io voltage   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 04/24] mmc: omap_hsmmc: set MMC mode in the UHSMS bit field   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 05/24] mmc: omap_hsmmc: Enable DDR mode support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 06/24] mmc: omap_hsmmc: Add tuning support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 07/24] mmc: omap_hsmmc: Workaround for errata id i802   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 08/24] mmc: omap_hsmmc: Reduce the max timeout for reset controller fsm   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 09/24] mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 10/24] ARM: OMAP5/DRA7: Enable iodelay recalibration to be done from uboot   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 11/24] mmc: omap_hsmmc: Add support to set IODELAY values   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 12/24] mmc: omap_hsmmc: Add support to get pinctrl values and max frequency for different hw revisions   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 13/24] mmc: omap_hsmmc: allow the simple HS modes to use the default pinctrl   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 14/24] mmc: omap_hsmmc: update mmc->clock with the actual bus speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 15/24] mmc: omap_hsmmc: implement send_init_stream callback   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 16/24] mmc: omap_hsmmc: allow mmc clock to be gated   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 17/24] mmc: omap_hsmmc: add signal voltage selection support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 18/24] ARM: OMAP5: set mmc clock frequency to 192MHz   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 19/24] ARM: dts: DRA7: use new dra7-specific compatible string   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 20/24] ARM: dts: dra7: Add supported MMC/SD modes in MMC dt nodes   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 21/24] dts: am57xx-beagle-x15: disable UHS and HS200 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 22/24] dts: am57xx-idk: disable HS200 support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 23/24] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 24/24] configs: dra7xx_evm/dra7xx_hs_evm: Enable MMC HS200 and SD UHS support   Jean-Jacques Hiblot
• [U-Boot] [PATCH] armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088   York Sun
• [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set   Alexey Brodkin
• [U-Boot] [PATCH] env: sf: fix return value of env_sf_load   Tom Rini
• [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function   Michal Simek
• [U-Boot] [PATCH v1] spl: eMMC/SD: Provide one __weak spl_boot_mode() function   Stefano Babic
• [U-Boot] AM3703 does not boot from MicroSD card   Peter Robinson
• [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set   Masahiro Yamada
• [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set   Alexey Brodkin
• [U-Boot] [PATCH 3/3] MIPS: add BMIPS Netgear DGND3700v2 board   Daniel Schwierzeck
• [U-Boot] MIPS relocation DT error   Daniel Schwierzeck
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH] fdt: Fixup only valid memory banks   Stephen Warren
• [U-Boot] [PATCH 1/1] efi_loader: fix the online help for bootefi bootmgr   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/2] efi_loader: update README.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/2] efi_loader: split README.efi into two separate documents   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/2] efi_loader: rewrite README.efi   Heinrich Schuchardt
• [U-Boot] standalone example on mips/ath79/QCA9558/Tp-Link Archer-c7   Daniel Schwierzeck
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   York Sun
• [U-Boot] [PATCH 1/1] efi_loader: efi_smbios_register should have a return value   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: use constants in efi_allocate_pages()   Heinrich Schuchardt
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   York Sun
• [U-Boot] [PATCH v2] mx6sabresd: Add fastboot support   Fabio Estevam
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   York Sun
• [U-Boot] [PATCH v2 1/1] efi_loader: efi_smbios_register should have a return value   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] rockchip: gpio: remove dead code   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] rockchip: gpio: remove dead code   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/1] i2c: mvtwsi.c: Avoid NULL dereference   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] atcspi200: avoid possible NULL dereference   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] dm: video: tegra124: incorrect logical condition   Heinrich Schuchardt
• [U-Boot] [U-Boot, v2] Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to Kconfig   Tom Rini
• [U-Boot] [U-Boot, V4] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig   Tom Rini
• [U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support   Sumit Garg
• [U-Boot] [PATCH v3 09/15] env: Support multiple environments   Simon Goldschmidt
• [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes   Simon Goldschmidt
• [U-Boot] [PATCH v10 00/27] dm: Generic MTD Subsystem, with SPI-NOR interface   Andy Yan
• [U-Boot] [PATCH] arm64: zynqmp: Enable ethernet driver for zc1751-dc5   Michal Simek
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Maxime Ripard
• [U-Boot] [GIT PULL] Xilinx patches for v2018.03   Michal Simek
• [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Julian Calaby
• [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership   Wolfgang Denk
• [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Maxime Ripard
• [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes   Maxime Ripard
• [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership   Alexander Graf
• [U-Boot] [linux-sunxi] Re: [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Julian Calaby
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Fabio Estevam
• [U-Boot] [PATCH V5 31/31] imx: add i.MX8MQ EVK support   Stefano Babic
• [U-Boot] [PATCH 1/2] iomux-v3: Take mx6dqp in consideration for imx_iomux_v3_setup_pad()   Fabio Estevam
• [U-Boot] [PATCH 2/2] i2c: imx: Take mx6dqp in consideration in the I2C_PADS_INFO macro   Fabio Estevam
• [U-Boot] [PATCH] arm: zynq: Enable debug uart on Zedboard   Michal Simek
• [U-Boot] [PATCH v3 13/15] MAINTAINERS: Take over BCM2835 maintainership   Wolfgang Denk
• [U-Boot] [PATCH 0/4] env: cleanups after adding multiple envs   Simon Goldschmidt
• [U-Boot] [PATCH 1/4] env: make env_import(_redund) return 0 on success, not 1   Simon Goldschmidt
• [U-Boot] [PATCH 2/4] env: move more common code to env_import_redund   Simon Goldschmidt
• [U-Boot] [PATCH 3/4] env: make env drivers propagate env_import return value   Simon Goldschmidt
• [U-Boot] [PATCH 4/4] env: sf: use env_import_redund to simplify env_sf_load   Simon Goldschmidt
• [U-Boot] [PATCH 0/4] env: cleanups after adding multiple envs   Simon Goldschmidt
• [U-Boot] [PATCH 0/3] sunxi: sun8i-emac: Update DT bindings   Andre Przywara
• [U-Boot] [PATCH v2 0/4] env: cleanups after adding multiple envs   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/4] env: make env_import(_redund) return 0 on success, not 1   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/4] env: move more common code to env_import_redund   Simon Goldschmidt
• [U-Boot] [PATCH v2 3/4] env: make env drivers propagate env_import return value   Simon Goldschmidt
• [U-Boot] [PATCH v2 4/4] env: sf: use env_import_redund to simplify env_sf_load   Simon Goldschmidt
• [U-Boot] EFI helloworld build fails with new compilers   Andre Przywara
• [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH   Alexey Brodkin
• [U-Boot] U-Boot Operation on Xilinx Zynq SoC with Micro C   Nelson Silva
• [U-Boot] [PATCH] Kconfig: Use imply for network commands in distro default   Michal Simek
• [U-Boot] [PATCH] usb: dwc2: Rename CONFIG_DWC2_UTMI_PHY_WIDTH to CONFIG_DWC2_UTMI_WIDTH   Marek Vasut
• [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set   Masahiro Yamada
• [U-Boot] [PATCH] Build system: Don't check for CONFIG_SYS_TEXT_BASE being set   Alexey Brodkin
• [U-Boot] [PATCH 01/10] mmc: uniphier-sd: Add compatible strings for RCar Gen2   Marek Vasut
• [U-Boot] [PATCH 02/10] mmc: uniphier-sd: Use mmc_of_parse()   Marek Vasut
• [U-Boot] [PATCH V3 03/10] mmc: uniphier-sd: Add Renesas RCar quirks   Marek Vasut
• [U-Boot] [PATCH 04/10] mmc: uniphier-sd: Handle Renesas div-by-1   Marek Vasut
• [U-Boot] [PATCH 05/10] mmc: uniphier-sd: Handle DMA completion flag differences   Marek Vasut
• [U-Boot] [PATCH 06/10] mmc: uniphier-sd: Handle bus width 0   Marek Vasut
• [U-Boot] [PATCH 07/10] mmc: uniphier-sd: Always check controller version   Marek Vasut
• [U-Boot] [PATCH V3 08/10] mmc: uniphier-sd: Properly handle pin voltage configuration   Marek Vasut
• [U-Boot] [PATCH 09/10] mmc: uniphier-sd: Export registers and IO accessors   Marek Vasut
• [U-Boot] [PATCH 10/10] mmc: uniphier-sd: Add Renesas SDR104/HS200 tuning support   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: k2g: Add pinmux data for QSPI on K2G ICE   Vignesh R
• [U-Boot] [PATCH 2/2] ARM: dts: keystone-k2g-ice: Add support for QSPI   Vignesh R
• [U-Boot] [PATCH v2 1/4] env: make env_import(_redund) return 0 on success, not 1   Maxime Ripard
• [U-Boot] [PATCH v2 2/4] env: move more common code to env_import_redund   Maxime Ripard
• [U-Boot] [PATCH v2 3/4] env: make env drivers propagate env_import return value   Maxime Ripard
• [U-Boot] [PATCH v2 4/4] env: sf: use env_import_redund to simplify env_sf_load   Maxime Ripard
• [U-Boot] [PATCH v3 17/30] sunxi: arm64: Increase u-boot size on MMC environment   Maxime Ripard
• [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs   patrice.chotard at st.com
• [U-Boot] [PATCH 1/8] mach-stm32: Add get_cpu_id support   patrice.chotard at st.com
• [U-Boot] [PATCH 2/8] mach-stm32: Move BOARD_LATE_INIT flag to mach-stm32 Kconfig   patrice.chotard at st.com
• [U-Boot] [PATCH 3/8] board: stm32f429-discovery: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [PATCH 4/8] board: stm32h743-evaluation: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [PATCH 5/8] board: stm32f743-discovery: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [PATCH 6/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [PATCH 7/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [PATCH 8/8] board: stm32f429-evaluation: Add set_env_soc_name() in board_late_init()   patrice.chotard at st.com
• [U-Boot] [U-Boot, v2, 10/15] dm: mmc: sunxi: Add support for driver model   Heinrich Schuchardt
• [U-Boot] [PATCH 1/8] mach-stm32: Add get_cpu_id support   Vikas Manocha
• [U-Boot] [PATCH 0/8] Add get_cpu_id for STM32 SoCs   Vikas Manocha
• [U-Boot] [PATCH 6/8] board: stm32f469-discovery: Add set_env_soc_name() in board_late_init()   Vikas Manocha
• [U-Boot] [PATCH 1/1] efi_loader: fix building crt0 on arm   Heinrich Schuchardt
• [U-Boot] [U-Boot,1/1] efi_loader: fix building crt0 on arm   Vagrant Cascadian
• [U-Boot] [PATCH] davinci: Fix omapl138_lcdk builds   Tom Rini
• [U-Boot] [PATCH 3/5] zynq: Support CPU info display   Ezequiel Garcia
• [U-Boot] [PATCH 1/1] efi_loader: efi_smbios_register should have a return value   Alexander Graf
• [U-Boot] [PATCH v2 1/1] efi_loader: efi_smbios_register should have a return value   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: simplify calling efi_init_obj_list   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: nvedit: env_get_f must check for env_get_char error codes   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [GIT PULL] Xilinx patches for v2018.03   Tom Rini
• [U-Boot] [PATCH] davinci: Fix omapl138_lcdk builds   Tom Rini