[U-Boot] [PATCH 5/6] ARM: dts: stm32: Add STM32F429 Evaluation board support

patrice.chotard at st.com patrice.chotard at st.com
Thu Jan 18 12:39:33 UTC 2018 

From: Patrice Chotard <patrice.chotard at st.com>

This DT file comes from kernel v4.15, this board offers :

   _ STM32F429NIH6 microcontroller
   _ 4.3” color TFT LCD with resistive touchscreen (480 x 272 pixels)
   _ Six 5 V power supply options:
        Power jack
        ST-LINK/V2 USB connector
        User USB HS connector
        User USB FS1 connector
        User USB FS2 connector
        Daughterboard
   _ SAI Audio DAC, stereo audio jack which supports headset with
     microphone
   _ Stereo digital microphone, audio terminal connector used to connect
     external speakers
   _ 2 GBytes (or more) SDIO interface MicroSD card
   _ RF EEPROM on I2 C compatible serial interface
   _ RS-232 communication
   _ IrDA transceiver
   _ JTAG/SWD and ETM trace debug support, ST-LINK/V2 embedded
   _ IEEE-802.3-2002 compliant Ethernet connector
   _ Camera module
   _ 8M x 32-bit SDRAM, 1M x 16-bit SRAM and 8M x 16-bit NOR Flash
   _ Joystick with 4-directional control and selector
   _ Reset, Wakeup and Tamper buttons
   _ 4 color user LEDs
   _ Extension connectors & memory connectors for daughterboard or
     wrapping board
   _ USB OTG HS and FS with Micro-AB connectors
   _ RTC with backup battery
   _ CAN2.0A/B compliant connection
   _ Potentiometer
   _ Motor control connector

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
 arch/arm/dts/Makefile           |   1 +
 arch/arm/dts/stm32429i-eval.dts | 276 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 277 insertions(+)
 create mode 100644 arch/arm/dts/stm32429i-eval.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f10482e..0626c76 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -214,6 +214,7 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
 
 dtb-$(CONFIG_STM32F4) += stm32f429-disco.dtb \
+	stm32429i-eval.dtb \
 	stm32f469-disco.dtb
 
 dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
diff --git a/arch/arm/dts/stm32429i-eval.dts b/arch/arm/dts/stm32429i-eval.dts
new file mode 100644
index 0000000..362ea42
--- /dev/null
+++ b/arch/arm/dts/stm32429i-eval.dts
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2015, STMicroelectronics - All Rights Reserved
+ * Author: Maxime Coquelin <mcoquelin.stm32 at gmail.com> for STMicroelectronics.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vref: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vref";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		orange {
+			gpios = <&gpiog 7 1>;
+		};
+		red {
+			gpios = <&gpiog 10 1>;
+		};
+		blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button at 0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button at 1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+	adc3: adc at 200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov2640: camera at 30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
+	stmpe1600: stmpe1600 at 42 {
+		compatible = "st,stmpe1600";
+		reg = <0x42>;
+		interrupts = <8 3>;
+		interrupt-parent = <&gpioi>;
+		interrupt-controller;
+		wakeup-source;
+
+		stmpegpio: stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&iwdg {
+	status = "okay";
+	timeout-sec = <32>;
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins>;
+	pinctrl-names = "default";
+	dma-ranges;
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy at 1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer at 0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer at 2 {
+		status = "okay";
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
1.9.1

More information about the U-Boot mailing list