[U-Boot] [PATCH] mx6ull: Handle the CONFIG_MX6ULL cases correctly
Stefano Babic
sbabic at denx.de
Wed Jan 3 13:20:55 UTC 2018
Hi Fabio,
On 01/01/2018 23:29, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
>
> Since commit 051ba9e082f7 ("Kconfig: mx6ull: Deselect MX6UL from
> CONFIG_MX6ULL") CONFIG_MX6ULL does not select CONFIG_MX6UL anymore, so
> take this into consideration in all the checks for CONFIG_MX6UL.
>
Thanks for fixing this.
What about include/configs/imx6_spl.h:
#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6SL)
#define CONFIG_SPL_BSS_START_ADDR 0x88200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
There is not currently mainlined ULL boards with SPL, but I would fix
this, too.
Best regards,
Stefano
> Reported-by: Stefan Agner <stefan at agner.ch>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
> arch/arm/include/asm/arch-mx6/imx-regs.h | 20 ++++++++++----------
> arch/arm/include/asm/arch-mx6/mx6-ddr.h | 2 +-
> arch/arm/include/asm/arch-mx6/mx6ul-ddr.h | 2 +-
> arch/arm/include/asm/mach-imx/iomux-v3.h | 4 ++--
> arch/arm/include/asm/mach-imx/regs-lcdif.h | 9 ++++++---
> arch/arm/mach-imx/mx6/ddr.c | 2 +-
> drivers/gpio/mxc_gpio.c | 4 ++--
> include/configs/mx6_common.h | 4 ++--
> 8 files changed, 25 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 7736b6a..8c7ff6a 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -17,7 +17,7 @@
> #define GPU_2D_ARB_END_ADDR 0x02203FFF
> #define OPENVG_ARB_BASE_ADDR 0x02204000
> #define OPENVG_ARB_END_ADDR 0x02207FFF
> -#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
> +#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define CAAM_ARB_BASE_ADDR 0x00100000
> #define CAAM_ARB_END_ADDR 0x00107FFF
> #define GPU_ARB_BASE_ADDR 0x01800000
> @@ -46,7 +46,7 @@
> #define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
>
> /* GPV - PL301 configuration ports */
> -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
> +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
> defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
> #define GPV2_BASE_ADDR 0x00D00000
> #define GPV3_BASE_ADDR 0x00E00000
> @@ -88,7 +88,7 @@
> #define QSPI0_AMBA_END 0x6FFFFFFF
> #define QSPI1_AMBA_BASE 0x70000000
> #define QSPI1_AMBA_END 0x7FFFFFFF
> -#elif defined(CONFIG_MX6UL)
> +#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define WEIM_ARB_BASE_ADDR 0x50000000
> #define WEIM_ARB_END_ADDR 0x57FFFFFF
> #define QSPI0_AMBA_BASE 0x60000000
> @@ -109,7 +109,7 @@
> #endif
>
> #if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
> - defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
> + defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define MMDC0_ARB_BASE_ADDR 0x80000000
> #define MMDC0_ARB_END_ADDR 0xFFFFFFFF
> #define MMDC1_ARB_BASE_ADDR 0xC0000000
> @@ -262,7 +262,7 @@
> #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
> /* i.MX6SL/SLL */
> #define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
> -#ifdef CONFIG_MX6UL
> +#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
> #else
> /* i.MX6SX */
> @@ -288,7 +288,7 @@
> #define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000)
> #endif
> #define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000)
> -#ifdef CONFIG_MX6UL
> +#if (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
> #define UART6_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
> #elif defined(CONFIG_MX6SX)
> @@ -337,7 +337,7 @@
> #define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000)
> #define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000)
> #define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000)
> -#elif defined(CONFIG_MX6ULL)
> +#elif (defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000)
> #define DCP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000)
> #define RNGB_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000)
> @@ -354,7 +354,7 @@
> #define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000)
> #define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
>
> -#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
> +#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \
> defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
> #define IRAM_SIZE 0x00040000
> #else
> @@ -573,7 +573,7 @@ struct src {
> #define IOMUXC_GPR12_LOS_LEVEL (0x1f << 4)
>
> struct iomuxc {
> -#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
> +#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> u8 reserved[0x4000];
> #endif
> u32 gpr[14];
> @@ -700,7 +700,7 @@ struct cspi_regs {
> #define MXC_CSPICON_SSPOL 12 /* SS polarity */
> #define MXC_CSPICON_CTL 20 /* inactive state of SCLK */
> #if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
> - defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
> + defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
> #define MXC_SPI_BASE_ADDRESSES \
> ECSPI1_BASE_ADDR, \
> ECSPI2_BASE_ADDR, \
> diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
> index 2a8d443..19d2f1d 100644
> --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
> +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
> @@ -16,7 +16,7 @@
> #ifdef CONFIG_MX6SX
> #include "mx6sx-ddr.h"
> #else
> -#ifdef CONFIG_MX6UL
> +#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
> #include "mx6ul-ddr.h"
> #else
> #ifdef CONFIG_MX6SL
> diff --git a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
> index ed11c4b..518b812 100644
> --- a/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
> +++ b/arch/arm/include/asm/arch-mx6/mx6ul-ddr.h
> @@ -7,7 +7,7 @@
> #ifndef __ASM_ARCH_MX6UL_DDR_H__
> #define __ASM_ARCH_MX6UL_DDR_H__
>
> -#ifndef CONFIG_MX6UL
> +#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #error "wrong CPU"
> #endif
>
> diff --git a/arch/arm/include/asm/mach-imx/iomux-v3.h b/arch/arm/include/asm/mach-imx/iomux-v3.h
> index ad35e01..9fba8d1 100644
> --- a/arch/arm/include/asm/mach-imx/iomux-v3.h
> +++ b/arch/arm/include/asm/mach-imx/iomux-v3.h
> @@ -127,7 +127,7 @@ typedef u64 iomux_v3_cfg_t;
>
> #define PAD_CTL_ODE (1 << 11)
>
> -#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)
> +#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
> #define PAD_CTL_SPEED_LOW (0 << 6)
> #else
> #define PAD_CTL_SPEED_LOW (1 << 6)
> @@ -253,7 +253,7 @@ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { \
> imx_iomux_v3_setup_pad(MX6Q_##def);
> #define SETUP_IOMUX_PADS(x) \
> imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
> -#elif defined(CONFIG_MX6UL)
> +#elif defined(CONFIG_MX6UL)|| defined(CONFIG_MX6ULL)
> #define IOMUX_PADS(x) MX6_##x
> #define SETUP_IOMUX_PAD(def) \
> imx_iomux_v3_setup_pad(MX6_##def);
> diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h
> index 4de401b..17ae503 100644
> --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h
> +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h
> @@ -20,7 +20,8 @@ struct mxs_lcdif_regs {
> mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */
> mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */
> #if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
> - defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
> + defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
> + defined(CONFIG_MX6ULL)
> mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */
> #endif
> mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */
> @@ -56,7 +57,9 @@ struct mxs_lcdif_regs {
> mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */
> mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */
> #if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
> - defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
> + defined(CONFIG_MX7) || defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
> + defined(CONFIG_MX6ULL)
> +
> mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */
> #endif
> mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */
> @@ -65,7 +68,7 @@ struct mxs_lcdif_regs {
> mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */
> mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */
> #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7) || \
> - defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
> + defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || defined(CONFIG_MX6ULL)
> mxs_reg_32(hw_lcdif_thres)
> mxs_reg_32(hw_lcdif_as_ctrl)
> mxs_reg_32(hw_lcdif_as_buf)
> diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
> index 0cf391e..52a9a25 100644
> --- a/arch/arm/mach-imx/mx6/ddr.c
> +++ b/arch/arm/mach-imx/mx6/ddr.c
> @@ -631,7 +631,7 @@ void mx6sx_dram_iocfg(unsigned width,
> }
> #endif
>
> -#ifdef CONFIG_MX6UL
> +#if defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
> void mx6ul_dram_iocfg(unsigned width,
> const struct mx6ul_iomux_ddr_regs *ddr,
> const struct mx6ul_iomux_grp_regs *grp)
> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
> index c480eba..cfa620b 100644
> --- a/drivers/gpio/mxc_gpio.c
> +++ b/drivers/gpio/mxc_gpio.c
> @@ -47,12 +47,12 @@ static unsigned long gpio_ports[] = {
> #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \
> defined(CONFIG_MX7)
> [4] = GPIO5_BASE_ADDR,
> -#ifndef CONFIG_MX6UL
> +#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> [5] = GPIO6_BASE_ADDR,
> #endif
> #endif
> #if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7)
> -#ifndef CONFIG_MX6UL
> +#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> [6] = GPIO7_BASE_ADDR,
> #endif
> #endif
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index 5fb85a1..f72c7ed 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -7,7 +7,7 @@
> #ifndef __MX6_COMMON_H
> #define __MX6_COMMON_H
>
> -#ifndef CONFIG_MX6UL
> +#if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL))
> #ifndef CONFIG_SYS_L2CACHE_OFF
> #define CONFIG_SYS_L2_PL310
> #define CONFIG_SYS_PL310_BASE L2_PL310_BASE
> @@ -38,7 +38,7 @@
>
> /* Boot options */
> #if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
> - defined(CONFIG_MX6UL) || defined(CONFIG_MX6SLL))
> + defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)|| defined(CONFIG_MX6SLL))
> #define CONFIG_LOADADDR 0x82000000
> #ifndef CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_TEXT_BASE 0x87800000
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list