[U-Boot] [PATCH] mmc: fix the wrong dislabing clock

[Jaehoon Chung]

On 01/17/2018 07:36 PM, Jaehoon Chung wrote:
> When power is off, clock is not disabling.
> Because it's passed to 1, mmc->clock should be set to f_min value.
> Some drivers can't initialize the eMMC/SD card with current status.
> 
> This patch is to fix the disabling clock value to 0.
> 
> Fixes: 2e7410d76ad1 ("mmc: disable the mmc clock during power off")
> 
> Signed-off-by: Jaehoon Chung <jh80.chung at samsung.com>

Applied to u-boot-mmc. Thanks.

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/mmc.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 53c819187e..311f51f237 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1501,11 +1501,13 @@ static int mmc_set_ios(struct mmc *mmc)
>  
>  int mmc_set_clock(struct mmc *mmc, uint clock, bool disable)
>  {
> -	if (clock > mmc->cfg->f_max)
> -		clock = mmc->cfg->f_max;
> +	if (!disable && clock != 0) {
> +		if (clock > mmc->cfg->f_max)
> +			clock = mmc->cfg->f_max;
>  
> -	if (clock < mmc->cfg->f_min)
> -		clock = mmc->cfg->f_min;
> +		if (clock < mmc->cfg->f_min)
> +			clock = mmc->cfg->f_min;
> +	}
>  
>  	mmc->clock = clock;
>  	mmc->clk_disable = disable;
> @@ -2449,7 +2451,7 @@ static int mmc_power_on(struct mmc *mmc)
>  
>  static int mmc_power_off(struct mmc *mmc)
>  {
> -	mmc_set_clock(mmc, 1, true);
> +	mmc_set_clock(mmc, 0, true);
>  #if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
>  	if (mmc->vmmc_supply) {
>  		int ret = regulator_set_enable(mmc->vmmc_supply, false);
>