[U-Boot] FW: u-boot v2016 vs v2013

[Mehmet Ali İPİN]

Thanks and best regards.

-----Original Message-----
From: Fabio Estevam [mailto:festevam at gmail.com] 
Sent: Wednesday, January 24, 2018 3:29 PM
To: Mehmet Ali İPİN <mehmet.ipin at pavotek.com.tr>
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] FW: u-boot v2016 vs v2013

On Wed, Jan 24, 2018 at 10:26 AM, Mehmet Ali İPİN <mehmet.ipin at pavotek.com.tr> wrote:
> Dear Estevam,
>
> I am (in fact hardware engineer developed the PCB)  not an experienced u-boot/linux developer, therefore sorry for my complex questions.
> I will check the forum, and google for this message, but you may help me to start the right path.
>
> May be, according to your experience you can advise me to check some 
> (phy/mac) register, pin status, clock values, Or give the name of threads in u-boot or nxp imx6 forum which is about similar dhcp events, if you remember.
>
> Since its a new PCB board, so we did not load/run the linux yet.

Try looking at existing supported boards that use KSZ9021, such as board/boundary/nitrogen6x/nitrogen6x.c for example.