[U-Boot] [PATCH 06/15] spl: fit: implement recording of loadables into /fit-images
Michal Simek
monstr at monstr.eu
Thu Jan 18 12:56:28 UTC 2018
Hi Philipp,
2017-09-13 21:29 GMT+02:00 Philipp Tomsich <
philipp.tomsich at theobroma-systems.com>:
> If a FDT was loaded (e.g. to append it to U-Boot image), we store it's
> address and record information for all loadables into this FDT. This
> allows us to easily keep track of images for multiple privilege levels
> (e.g. with ATF) or of firmware images preloaded into temporary
> locations (e.g. PMU firmware that may overlap the SPL stage).
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> ---
>
> common/spl/spl_fit.c | 95 ++++++++++++++++++++++++++++++
> ++++++++++++++--------
> 1 file changed, 81 insertions(+), 14 deletions(-)
>
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index 9f05e1e..6dc0969 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -2,7 +2,7 @@
> * Copyright (C) 2016 Google, Inc
> * Written by Simon Glass <sjg at chromium.org>
> *
> - * SPDX-License-Identifier: GPL-2.0+
> + * SPDX-License-Identifier: GPL-2.0+
> */
>
> #include <common.h>
> @@ -16,22 +16,24 @@
> #endif
>
> /**
> - * spl_fit_get_image_node(): By using the matching configuration subnode,
> + * spl_fit_get_image_name(): By using the matching configuration subnode,
> * retrieve the name of an image, specified by a property name and an
> index
> * into that.
> * @fit: Pointer to the FDT blob.
> * @images: Offset of the /images subnode.
> * @type: Name of the property within the configuration subnode.
> * @index: Index into the list of strings in this property.
> + * @outname: Name of the image
> *
> - * Return: the node offset of the respective image node or a negative
> - * error number.
> + * Return: 0 on success, or a negative error number
> */
> -static int spl_fit_get_image_node(const void *fit, int images,
> - const char *type, int index)
> +static int spl_fit_get_image_name(const void *fit, int images,
> + const char *type, int index,
> + char **outname)
> {
> const char *name, *str;
> - int node, conf_node;
> + __maybe_unused int node;
> + int conf_node;
> int len, i;
>
> conf_node = fit_find_config_node(fit);
> @@ -63,7 +65,35 @@ static int spl_fit_get_image_node(const void *fit, int
> images,
> }
> }
>
> + *outname = (char *)str;
> + return 0;
> +}
> +
> +/**
> + * spl_fit_get_image_node(): By using the matching configuration subnode,
> + * retrieve the name of an image, specified by a property name and an
> index
> + * into that.
> + * @fit: Pointer to the FDT blob.
> + * @images: Offset of the /images subnode.
> + * @type: Name of the property within the configuration subnode.
> + * @index: Index into the list of strings in this property.
> + *
> + * Return: the node offset of the respective image node or a negative
> + * error number.
> + */
> +static int spl_fit_get_image_node(const void *fit, int images,
> + const char *type, int index)
> +{
> + char *str;
> + int err;
> + int node;
> +
> + err = spl_fit_get_image_name(fit, images, type, index, &str);
> + if (err)
> + return err;
> +
> debug("%s: '%s'\n", type, str);
> +
> node = fdt_subnode_offset(fit, images, str);
> if (node < 0) {
> debug("cannot find image node '%s': %d\n", str, node);
> @@ -116,15 +146,15 @@ static int get_aligned_image_size(struct
> spl_load_info *info, int data_size,
> * @info: points to information about the device to load data from
> * @sector: the start sector of the FIT image on the device
> * @fit: points to the flattened device tree blob describing the FIT
> - * image
> + * image
> * @base_offset: the beginning of the data area containing the actual
> * image data, relative to the beginning of the FIT
> * @node: offset of the DT node describing the image to load
> (relative
> - * to @fit)
> + * to @fit)
> * @image_info: will be filled with information about the loaded
> image
> - * If the FIT node does not contain a "load" (address)
> property,
> - * the image gets loaded to the address pointed to by the
> - * load_addr member in this struct.
> + * If the FIT node does not contain a "load" (address)
> property,
> + * the image gets loaded to the address pointed to by the
> + * load_addr member in this struct.
> *
> * Return: 0 on success or a negative error number.
> */
> @@ -236,6 +266,35 @@ static int spl_fit_append_fdt(struct spl_image_info
> *spl_image,
> image_info.load_addr = spl_image->load_addr + spl_image->size;
> ret = spl_load_fit_image(info, sector, fit, base_offset, node,
> &image_info);
> +
> + if (ret < 0)
> + return ret;
> +
> + /* Make the load-address of the FDT available for the SPL
> framework */
> + spl_image->fdt_addr = (void *)image_info.load_addr;
> + /* Try to make space, so we can inject details on the loadables */
> + ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
> +
> + return ret;
> +}
> +
> +static int spl_fit_record_loadable(const void *fit, int images, int index,
> + void *blob, struct spl_image_info
> *image)
> +{
> + char *name;
> + int node, ret;
> +
> + ret = spl_fit_get_image_name(fit, images, "loadables",
> + index, &name);
> + if (ret < 0)
> + return ret;
> +
> + node = spl_fit_get_image_node(fit, images, "loadables", index);
> +
> + ret = fdt_record_loadable(blob, index, name, image->load_addr,
> + image->size, image->entry_point,
> + fdt_getprop(fit, node, "type", NULL),
> + fdt_getprop(fit, node, "os", NULL));
>
Calling this fdt_record_loadable is causing compilation issue when
CONFIG_ARCH_FIXUP_FDT_MEMORY is disabled.
common/spl/built-in.o: In function `spl_fit_record_loadable':
/mnt/disk/u-boot/common/spl/spl_fit.c:308: undefined reference to
`fdt_record_loadable'
/mnt/disk/u-boot/common/spl/spl_fit.c:308:(.text.spl_load_simple_fit+0x2ec):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol
`fdt_record_loadable'
make[1]: *** [spl/u-boot-spl] Error 1
You can see this issue with xilinx_zynqmp_zcu102_rev1_0_defconfig when you
disable that option.
Just a note adding dependency to Kconfig is not a proper solution because
for this combination I need fit image support.
Can you please propose solution?
Thanks,
Michal
More information about the U-Boot
mailing list