[U-Boot] [PATCH] mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clock

[Benoît Thébaudeau]

Commit 4f425280fa71 ("mmc: fsl_esdhc: Allow all supported prescaler
values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on
i.MX, thus bypassing the SD clock frequency prescaler, in order to be
able to get higher SD clock frequencies in some contexts. However, that
commit missed the fact that this value is illegal on the eSDHCv3
instance of the i.MX53. This seems to be the only exception on i.MX,
this value being legal even for the eSDHCv2 instances of the i.MX53.

Fix this issue by changing the minimum prescaler value for the single
instance of the i.MX53 eSDHCv3 controller.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev at gmail.com>
---
 drivers/mmc/fsl_esdhc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 499d622c6d..90425e8a30 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -528,14 +528,19 @@ out:
 
 static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
 {
+	struct fsl_esdhc *regs = priv->esdhc_regs;
 	int div = 1;
 #ifdef ARCH_MXC
+#ifdef CONFIG_MX53
+	/* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */
+	int pre_div = regs == (struct fsl_esdhc *)MMC_SDHC3_BASE_ADDR ? 2 : 1;
+#else
 	int pre_div = 1;
+#endif
 #else
 	int pre_div = 2;
 #endif
 	int ddr_pre_div = mmc->ddr_mode ? 2 : 1;
-	struct fsl_esdhc *regs = priv->esdhc_regs;
 	int sdhc_clk = priv->sdhc_clk;
 	uint clk;
 
-- 
2.14.1