[U-Boot] [U-Boot,v3,1/2] bcm283x: Add pinctrl driver

[Tom Rini]

On Tue, Jan 23, 2018 at 06:05:21PM +0100, Alexander Graf wrote:

> The bcm283x family of SoCs have a GPIO controller that also acts as
> pinctrl controller.
> 
> This patch introduces a new pinctrl driver that can actually properly mux
> devices into their device tree defined pin states and is now the primary
> owner of the gpio device. The previous GPIO driver gets moved into a
> subdevice of the pinctrl driver, bound to the same OF node.
> 
> That way whenever a device asks for pinctrl support, it gets it
> automatically from the pinctrl driver and GPIO support is still available
> in the normal command line phase.
> 
> Signed-off-by: Alexander Graf <agraf at suse.de>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180128/2876c0cc/attachment.sig>