[U-Boot] [U-boot] Odroidxu3/4 -s2mps11 bind pmic failed

Jaehoon Chung jh80.chung at samsung.com
Mon Jan 8 22:47:21 UTC 2018


Hi, 

On 01/08/2018 03:57 PM, Anand Moon wrote:
> Hi Jaehoon,

This topic is on u-boot side. so Removed the linux-samsung-soc mailing.

[..snip..]

>>> How can we invoke and verify the s2mps11 init function during board
>>> initialization ?
>>
>> When i have checked the above values, those are the reset value at each registers.
>> but some registers are different with reset values.
>>
>> do you want to change the pmic register value at init time?
> [snip]
> 
> What I have debug at my end pmci is not getting invoke or initialize via u-boot.
> Yes default value for all the control registers would be fine.
> 
> I was looking into some missing feature like.
> s2mps11 regulator initialization via dts in u-boot.
>  s2mps11_pmic
>      .probe = s2mps11_probe
>      .bind = s2mps11_bind

It needs to implement the regulator driver.
I will send the patch for s2mps11 regulator driver within this week.
Then i think that it will be set to values from device-tree.

> 
> Can we enable CONFIG_SPL_BUILD for Odroid platform.
> much of the core initialization is blocked under this flag.
> Is their any plan to make this feature working.

Lukasz has already mentioned..

> 
> Best Regards
> -Anand
> 
> 
> 



More information about the U-Boot mailing list