[U-Boot] [U-Boot, V3] Convert CONFIG_SYS_DV_CLKMODE et al to Kconfig

[Adam Ford]

On Mon, Jan 22, 2018 at 3:30 PM, Tom Rini <trini at konsulko.com> wrote:
> On Fri, Jan 12, 2018 at 07:26:06AM -0600, Adam Ford wrote:
>
>> This converts the following to Kconfig:
>>    CONFIG_SYS_DV_CLKMODE
>>    CONFIG_SYS_DA850_PLL0_POSTDIV
>>    CONFIG_SYS_DA850_PLL0_PLLDIV1
>>    CONFIG_SYS_DA850_PLL0_PLLDIV2
>>    CONFIG_SYS_DA850_PLL0_PLLDIV3
>>    CONFIG_SYS_DA850_PLL0_PLLDIV4
>>    CONFIG_SYS_DA850_PLL0_PLLDIV5
>>    CONFIG_SYS_DA850_PLL0_PLLDIV7
>>    CONFIG_SYS_DA850_PLL1_POSTDIV
>>    CONFIG_SYS_DA850_PLL1_PLLDIV1
>>    CONFIG_SYS_DA850_PLL1_PLLDIV2
>>    CONFIG_SYS_DA850_PLL1_PLLDIV3
>>
>> Signed-off-by: Adam Ford <aford173 at gmail.com>
>> Reviewed-by: David Lechner <david at lechnology.com>
>> ---
>> Changes in V3:
>>       Using the L138 Technical Reference manual, I changed the names to match
>>         the descriptions of the registers as listed in Table 8-2 and 8-3 of the
>>         PLL Control 0 and PLL Control 1 Registers.
>> V2:
>>         Expand Kconfig help definitions to give a small explanation of options
>> V1:
>> This patch is a continuation of Convert CONFIG_SOC_DA8XX et al
>> This also showed warnings when used with the legoev3_defconfig, however
>> it seems like the ev3 board was defining things in the header it didn't need
>> since it doesn't seem to be building da850_lowlevel.c.  I don't have the
>> hardware to test that board.
>>
>>  arch/arm/mach-davinci/Kconfig   | 85 ++++++++++++++++++++++++++++++++++++++++-
>>  configs/omapl138_lcdk_defconfig |  1 +
>>  include/configs/calimain.h      | 13 -------
>>  include/configs/da850evm.h      | 13 -------
>>  include/configs/ipam390.h       | 13 -------
>>  include/configs/legoev3.h       | 13 -------
>>  include/configs/omapl138_lcdk.h | 13 -------
>>  scripts/config_whitelist.txt    | 12 ------
>>  8 files changed, 85 insertions(+), 78 deletions(-)
>
> [patchwork link is https://patchwork.ozlabs.org/patch/859919/]
>
> First, this should also cover CONFIG_SYS_DA850_PLL0_PLLM which shouldn't
> be too bad.
>
> Second, this needs to deal with calimain, which has both
> CONFIG_SYS_DA850_PLL1_PLLM and CONFIG_SYS_DA850_PLL0_PLLM as dynamic.
> Ideas?  Thanks!
>
Can we push the low-hanging fruit and come back and revisit the rest
at a later date?   My goal was just try and clean up a bunch of config
files.

adam
> --
> Tom