[U-Boot] [PATCH v3 08/20] clk: rockchip: Add rk3328 gamc clock support
David Wu
david.wu at rock-chips.com
Sat Jan 13 06:02:36 UTC 2018
The rk3328 soc has two gmac controllers, one is gmac2io,
the other is gmac2phy. We use the gmac2io rgmii interface
for 1000M phy here.
Signed-off-by: David Wu <david.wu at rock-chips.com>
---
Changes in v3:
- Add "set parent" for gmac2io
- Add internal mac clk div_sel for gmac2io
Changes in v2:
- New patch
drivers/clk/rockchip/clk_rk3328.c | 178 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/rk3328-cru.h | 6 +-
2 files changed, 181 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c
index fa0c777..2ccc798 100644
--- a/drivers/clk/rockchip/clk_rk3328.c
+++ b/drivers/clk/rockchip/clk_rk3328.c
@@ -13,6 +13,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/cru_rk3328.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/grf_rk3328.h>
#include <asm/io.h>
#include <dm/lists.h>
#include <dt-bindings/clock/rk3328-cru.h>
@@ -94,6 +95,14 @@ enum {
PCLK_DBG_DIV_SHIFT = 0,
PCLK_DBG_DIV_MASK = 0xF << PCLK_DBG_DIV_SHIFT,
+ /* CLKSEL_CON27 */
+ GMAC2IO_PLL_SEL_SHIFT = 7,
+ GMAC2IO_PLL_SEL_MASK = 1 << GMAC2IO_PLL_SEL_SHIFT,
+ GMAC2IO_PLL_SEL_CPLL = 0,
+ GMAC2IO_PLL_SEL_GPLL = 1,
+ GMAC2IO_CLK_DIV_MASK = 0x1f,
+ GMAC2IO_CLK_DIV_SHIFT = 0,
+
/* CLKSEL_CON28 */
ACLK_PERIHP_PLL_SEL_CPLL = 0,
ACLK_PERIHP_PLL_SEL_GPLL,
@@ -393,6 +402,44 @@ static ulong rk3328_i2c_set_clk(struct rk3328_cru *cru, ulong clk_id, uint hz)
return DIV_TO_RATE(GPLL_HZ, src_clk_div);
}
+static ulong rk3328_gmac2io_set_clk(struct rk3328_cru *cru, ulong rate)
+{
+ struct rk3328_grf_regs *grf;
+ ulong ret;
+
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ /*
+ * The RGMII CLK can be derived either from an external "clkin"
+ * or can be generated from internally by a divider from SCLK_MAC.
+ */
+ if (readl(&grf->mac_con[1]) & BIT(10) &&
+ readl(&grf->soc_con[4]) & BIT(14)) {
+ /* An external clock will always generate the right rate... */
+ ret = rate;
+ } else {
+ u32 con = readl(&cru->clksel_con[27]);
+ ulong pll_rate;
+ u8 div;
+
+ if ((con >> GMAC2IO_PLL_SEL_SHIFT) & GMAC2IO_PLL_SEL_GPLL)
+ pll_rate = GPLL_HZ;
+ else
+ pll_rate = CPLL_HZ;
+
+ div = DIV_ROUND_UP(pll_rate, rate) - 1;
+ if (div <= 0x1f)
+ rk_clrsetreg(&cru->clksel_con[27], GMAC2IO_CLK_DIV_MASK,
+ div << GMAC2IO_CLK_DIV_SHIFT);
+ else
+ debug("Unsupported div for gmac:%d\n", div);
+
+ return DIV_TO_RATE(pll_rate, div);
+ }
+
+ return ret;
+}
+
static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id)
{
u32 div, con, con_id;
@@ -558,12 +605,48 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
case SCLK_I2C3:
ret = rk3328_i2c_set_clk(priv->cru, clk->id, rate);
break;
+ case SCLK_MAC2IO:
+ ret = rk3328_gmac2io_set_clk(priv->cru, rate);
+ break;
case SCLK_PWM:
ret = rk3328_pwm_set_clk(priv->cru, rate);
break;
case SCLK_SARADC:
ret = rk3328_saradc_set_clk(priv->cru, rate);
break;
+ case DCLK_LCDC:
+ case SCLK_PDM:
+ case SCLK_RTC32K:
+ case SCLK_UART0:
+ case SCLK_UART1:
+ case SCLK_UART2:
+ case SCLK_SDIO:
+ case SCLK_TSP:
+ case SCLK_WIFI:
+ case ACLK_BUS_PRE:
+ case HCLK_BUS_PRE:
+ case PCLK_BUS_PRE:
+ case ACLK_PERI_PRE:
+ case HCLK_PERI:
+ case PCLK_PERI:
+ case ACLK_VIO_PRE:
+ case HCLK_VIO_PRE:
+ case ACLK_RGA_PRE:
+ case SCLK_RGA:
+ case ACLK_VOP_PRE:
+ case ACLK_RKVDEC_PRE:
+ case ACLK_RKVENC:
+ case ACLK_VPU_PRE:
+ case SCLK_VDEC_CABAC:
+ case SCLK_VDEC_CORE:
+ case SCLK_VENC_CORE:
+ case SCLK_VENC_DSP:
+ case SCLK_EFUSE:
+ case PCLK_DDR:
+ case ACLK_GMAC:
+ case PCLK_GMAC:
+ case SCLK_USB3OTG_SUSPEND:
+ return 0;
default:
return -ENOENT;
}
@@ -571,9 +654,104 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
return ret;
}
+static int rk3328_gmac2io_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk3328_grf_regs *grf;
+ const char *clock_output_name;
+ int ret;
+
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ /*
+ * If the requested parent is in the same clock-controller and the id
+ * is SCLK_MAC2IO_SRC ("clk_mac2io_src"), switch to the internal clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO_SRC)) {
+ debug("%s: switching RGMII to SCLK_MAC2IO_SRC\n", __func__);
+ rk_clrreg(&grf->mac_con[1], BIT(10));
+ return 0;
+ }
+
+ /*
+ * Otherwise, we need to check the clock-output-names of the
+ * requested parent to see if the requested id is "gmac_clkin".
+ */
+ ret = dev_read_string_index(parent->dev, "clock-output-names",
+ parent->id, &clock_output_name);
+ if (ret < 0)
+ return -ENODATA;
+
+ /* If this is "gmac_clkin", switch to the external clock input */
+ if (!strcmp(clock_output_name, "gmac_clkin")) {
+ debug("%s: switching RGMII to CLKIN\n", __func__);
+ rk_setreg(&grf->mac_con[1], BIT(10));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk3328_gmac2io_ext_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk3328_grf_regs *grf;
+ const char *clock_output_name;
+ int ret;
+
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+ /*
+ * If the requested parent is in the same clock-controller and the id
+ * is SCLK_MAC2IO ("clk_mac2io"), switch to the internal clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC2IO)) {
+ debug("%s: switching RGMII to SCLK_MAC2IO\n", __func__);
+ rk_clrreg(&grf->soc_con[4], BIT(14));
+ return 0;
+ }
+
+ /*
+ * Otherwise, we need to check the clock-output-names of the
+ * requested parent to see if the requested id is "gmac_clkin".
+ */
+ ret = dev_read_string_index(parent->dev, "clock-output-names",
+ parent->id, &clock_output_name);
+ if (ret < 0)
+ return -ENODATA;
+
+ /* If this is "gmac_clkin", switch to the external clock input */
+ if (!strcmp(clock_output_name, "gmac_clkin")) {
+ debug("%s: switching RGMII to CLKIN\n", __func__);
+ rk_setreg(&grf->soc_con[4], BIT(14));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk3328_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ switch (clk->id) {
+ case SCLK_MAC2IO:
+ return rk3328_gmac2io_set_parent(clk, parent);
+ case SCLK_MAC2IO_EXT:
+ return rk3328_gmac2io_ext_set_parent(clk, parent);
+ case DCLK_LCDC:
+ case SCLK_PDM:
+ case SCLK_RTC32K:
+ case SCLK_UART0:
+ case SCLK_UART1:
+ case SCLK_UART2:
+ return 0;
+ }
+
+ debug("%s: unsupported clk %ld\n", __func__, clk->id);
+ return -ENOENT;
+}
+
static struct clk_ops rk3328_clk_ops = {
.get_rate = rk3328_clk_get_rate,
.set_rate = rk3328_clk_set_rate,
+ .set_parent = rk3328_clk_set_parent,
};
static int rk3328_clk_probe(struct udevice *dev)
diff --git a/include/dt-bindings/clock/rk3328-cru.h b/include/dt-bindings/clock/rk3328-cru.h
index 6d8bf13..cdc0b33 100644
--- a/include/dt-bindings/clock/rk3328-cru.h
+++ b/include/dt-bindings/clock/rk3328-cru.h
@@ -86,6 +86,9 @@
#define SCLK_USB3OTG_SUSPEND 97
#define SCLK_REF_USB3OTG_SRC 98
#define SCLK_MAC2IO_SRC 99
+#define SCLK_MAC2IO 100
+#define SCLK_MAC2PHY 101
+#define SCLK_MAC2IO_EXT 102
/* dclk gates */
#define DCLK_LCDC 180
@@ -199,9 +202,6 @@
#define CLK_NR_CLKS (HCLK_HDCP + 1)
-#define SCLK_MAC2IO 0
-#define SCLK_MAC2PHY 1
-
#define CLKGRF_NR_CLKS (SCLK_MAC2PHY + 1)
/* soft-reset indices */
--
2.7.4
More information about the U-Boot
mailing list