[U-Boot] [U-Boot, v2, 10/15] dm: mmc: sunxi: Add support for driver model

Heinrich Schuchardt xypron.glpk at gmx.de
Wed Jan 31 17:08:35 UTC 2018


On 07/04/2017 09:31 PM, Simon Glass wrote:
> Add a driver-model version of this driver which mostly uses the existing
> code. The old code can be removed once all boards are switched over.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2:
> - Drop debugging printf() now that the card detect is working

Unfortunately card detect is not working on the BananaPi:

I built Bananapi_defconfig which defaults to not using the driver model
and U-Boot is able to read from the SD card:

MMC:
SUNXI SD/MMC: 0

Loading Environment from FAT... *** Warning - bad CRC, using default
environment

I added

CONFIG_BLK=y
CONFIG_DM_MMC=y

And the same SD card is not recognized anymore.

MMC:
mmc at 01c0f000: 0

Loading Environment from FAT... MMC: no card present

mmc_init: -123, time 2

At least for clock registers there seem to be differences:

mmc_resource_init: priv->mclkreg = 01c20094 (without DM_MMC)
sunxi_mmc_probe: priv->mclkreg = 01c20088 (with DM_MMC)

Best regards

Heinrich

> 
>  drivers/mmc/sunxi_mmc.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 133 insertions(+)
> 
> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> index 23bef94f24..588574fab6 100644
> --- a/drivers/mmc/sunxi_mmc.c
> +++ b/drivers/mmc/sunxi_mmc.c
> @@ -9,6 +9,7 @@
>   */
>  
>  #include <common.h>
> +#include <dm.h>
>  #include <errno.h>
>  #include <malloc.h>
>  #include <mmc.h>
> @@ -19,14 +20,21 @@
>  #include <asm/arch/mmc.h>
>  #include <asm-generic/gpio.h>
>  
> +struct sunxi_mmc_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
> +};
> +
>  struct sunxi_mmc_priv {
>  	unsigned mmc_no;
>  	uint32_t *mclkreg;
>  	unsigned fatal_err;
> +	struct gpio_desc cd_gpio;	/* Change Detect GPIO */
>  	struct sunxi_mmc *reg;
>  	struct mmc_config cfg;
>  };
>  
> +#if !CONFIG_IS_ENABLED(DM_MMC)
>  /* support 4 mmc hosts */
>  struct sunxi_mmc_priv mmc_host[4];
>  
> @@ -83,6 +91,7 @@ static int mmc_resource_init(int sdc_no)
>  
>  	return ret;
>  }
> +#endif
>  
>  static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
>  {
> @@ -224,6 +233,7 @@ static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv,
>  	return 0;
>  }
>  
> +#if !CONFIG_IS_ENABLED(DM_MMC)
>  static int sunxi_mmc_core_init(struct mmc *mmc)
>  {
>  	struct sunxi_mmc_priv *priv = mmc->priv;
> @@ -234,6 +244,7 @@ static int sunxi_mmc_core_init(struct mmc *mmc)
>  
>  	return 0;
>  }
> +#endif
>  
>  static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
>  				 struct mmc_data *data)
> @@ -408,6 +419,7 @@ out:
>  	return error;
>  }
>  
> +#if !CONFIG_IS_ENABLED(DM_MMC)
>  static int sunxi_mmc_set_ios_legacy(struct mmc *mmc)
>  {
>  	struct sunxi_mmc_priv *priv = mmc->priv;
> @@ -488,3 +500,124 @@ struct mmc *sunxi_mmc_init(int sdc_no)
>  
>  	return mmc_create(cfg, mmc_host);
>  }
> +#else
> +
> +static int sunxi_mmc_set_ios(struct udevice *dev)
> +{
> +	struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
> +	struct sunxi_mmc_priv *priv = dev_get_priv(dev);
> +
> +	return sunxi_mmc_set_ios_common(priv, &plat->mmc);
> +}
> +
> +static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
> +			      struct mmc_data *data)
> +{
> +	struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
> +	struct sunxi_mmc_priv *priv = dev_get_priv(dev);
> +
> +	return sunxi_mmc_send_cmd_common(priv, &plat->mmc, cmd, data);
> +}
> +
> +static int sunxi_mmc_getcd(struct udevice *dev)
> +{
> +	struct sunxi_mmc_priv *priv = dev_get_priv(dev);
> +
> +	if (dm_gpio_is_valid(&priv->cd_gpio))
> +		return dm_gpio_get_value(&priv->cd_gpio);
> +
> +	return 1;
> +}
> +
> +static const struct dm_mmc_ops sunxi_mmc_ops = {
> +	.send_cmd	= sunxi_mmc_send_cmd,
> +	.set_ios	= sunxi_mmc_set_ios,
> +	.get_cd		= sunxi_mmc_getcd,
> +};
> +
> +static int sunxi_mmc_probe(struct udevice *dev)
> +{
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
> +	struct sunxi_mmc_priv *priv = dev_get_priv(dev);
> +	struct mmc_config *cfg = &plat->cfg;
> +	struct ofnode_phandle_args args;
> +	u32 *gate_reg;
> +	int bus_width, ret;
> +
> +	cfg->name = dev->name;
> +	bus_width = dev_read_u32_default(dev, "bus-width", 1);
> +
> +	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
> +	cfg->host_caps = 0;
> +	if (bus_width == 8)
> +		cfg->host_caps |= MMC_MODE_8BIT;
> +	if (bus_width >= 4)
> +		cfg->host_caps |= MMC_MODE_4BIT;
> +	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
> +	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
> +
> +	cfg->f_min = 400000;
> +	cfg->f_max = 52000000;
> +
> +	priv->reg = (void *)dev_read_addr(dev);
> +
> +	/* We don't have a sunxi clock driver so find the clock address here */
> +	ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
> +					  1, &args);
> +	if (ret)
> +		return ret;
> +	priv->mclkreg = (u32 *)ofnode_get_addr(args.node);
> +
> +	ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
> +					  0, &args);
> +	if (ret)
> +		return ret;
> +	gate_reg = (u32 *)ofnode_get_addr(args.node);
> +	setbits_le32(gate_reg, 1 << args.args[0]);
> +	priv->mmc_no = args.args[0] - 8;
> +
> +	ret = mmc_set_mod_clk(priv, 24000000);
> +	if (ret)
> +		return ret;
> +
> +	/* This GPIO is optional */
> +	if (!gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
> +				  GPIOD_IS_IN)) {
> +		int cd_pin = gpio_get_number(&priv->cd_gpio);
> +
> +		sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
> +	}
> +
> +	upriv->mmc = &plat->mmc;
> +
> +	/* Reset controller */
> +	writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
> +	udelay(1000);
> +
> +	return 0;
> +}
> +
> +static int sunxi_mmc_bind(struct udevice *dev)
> +{
> +	struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
> +
> +	return mmc_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
> +static const struct udevice_id sunxi_mmc_ids[] = {
> +	{ .compatible = "allwinner,sun5i-a13-mmc" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(sunxi_mmc_drv) = {
> +	.name		= "sunxi_mmc",
> +	.id		= UCLASS_MMC,
> +	.of_match	= sunxi_mmc_ids,
> +	.bind		= sunxi_mmc_bind,
> +	.probe		= sunxi_mmc_probe,
> +	.ops		= &sunxi_mmc_ops,
> +	.platdata_auto_alloc_size = sizeof(struct sunxi_mmc_plat),
> +	.priv_auto_alloc_size = sizeof(struct sunxi_mmc_priv),
> +};
> +#endif
> 



More information about the U-Boot mailing list