[U-Boot] [PATCH v8 11/12] mips: bmips: enable the SPI flash on the Sagem F at ST1704
Simon Glass
sjg at chromium.org
Tue Jan 16 14:57:18 UTC 2018
On 11 January 2018 at 09:11, Álvaro Fernández Rojas <noltari at gmail.com> wrote:
> It's a Winbond (w25x32) 4 MB SPI flash.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
> Reviewed-by: Jagan Teki <jagan at openedev.com>
> ---
> v8: no changes
> v7: no changes
> v6: no changes
> v5: sync with master
> v4: switch to CONFIG_BCM63XX_SPI
> v3: rename BCM6338 SPI driver to BCM6348
> v2: remove spi alias
>
> arch/mips/dts/sagem,f at st1704.dts | 12 ++++++++++++
> configs/sagem_f at st1704_ram_defconfig | 8 ++++++++
> 2 files changed, 20 insertions(+)
>
Reviewed-by: Simon Glass <sjg at chromium.org>
Please see below.
> diff --git a/arch/mips/dts/sagem,f at st1704.dts b/arch/mips/dts/sagem,f at st1704.dts
> index be15fe5551..dd0e5b8b7c 100644
> --- a/arch/mips/dts/sagem,f at st1704.dts
> +++ b/arch/mips/dts/sagem,f at st1704.dts
> @@ -44,6 +44,18 @@
> status = "okay";
> };
>
> +&spi {
> + status = "okay";
> +
> + spi-flash at 0 {
> + compatible = "spi-flash";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <20000000>;
> + };
> +};
> +
> &uart0 {
> u-boot,dm-pre-reloc;
> status = "okay";
> diff --git a/configs/sagem_f at st1704_ram_defconfig b/configs/sagem_f at st1704_ram_defconfig
> index cfc56cba37..5c091353e5 100644
> --- a/configs/sagem_f at st1704_ram_defconfig
> +++ b/configs/sagem_f at st1704_ram_defconfig
> @@ -39,3 +39,11 @@ CONFIG_RESET_BCM6345=y
> # CONFIG_SPL_SERIAL_PRESENT is not set
> CONFIG_DM_SERIAL=y
> CONFIG_BCM6345_SERIAL=y
> +CONFIG_BCM63XX_SPI=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_SPI_FLASH_WINBOND=y
Are these definitely in the right order?
> --
> 2.11.0
>
Regards,
Simon
More information about the U-Boot
mailing list