[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Siva Durga Prasad Paladugu]

Hi Jaehoon,

Any review comments on this.

Thanks,
Siva

> -----Original Message-----
> From: Siva Durga Prasad Paladugu [mailto:siva.durga.paladugu at xilinx.com]
> Sent: Thursday, January 04, 2018 3:11 PM
> To: u-boot at lists.denx.de
> Cc: jh80.chung at samsung.com; Siva Durga Prasad Paladugu
> <sivadur at xilinx.com>
> Subject: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
> 
> This patch series is meant to add SD3.0 support for ZynqMP platform.
> The first five patches in the series mostly setting up things in sdhci layer to
> support SD3.0 , the sixth patch is to add SD3.0 support for ZynqMP
> platform and the last patch is to enable this support for ZynqMP zcu102
> rev1.0 eval board.
> 
> Repo: u-boot-mmc.git
> Branch: hs200-working
> 
> Siva Durga Prasad Paladugu (7):
>   mmc: sdhci: Add support for disabling clock
>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
>   sdhci: Add new sdhci ops for platform specific tuning and delays
>   mmc: sdhci: Invoke platform specific tuning and delay routines
>   mmc : sdhci: Read capabilities register1 and update host caps
>   mmc: zynq_sdhci: Add support for SD3.0
>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
> 
>  board/xilinx/zynqmp/Makefile                  |   2 +
>  board/xilinx/zynqmp/tap_delays.c              | 230
> ++++++++++++++++++++++++++
>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
>  drivers/mmc/sdhci.c                           |  67 +++++++-
>  drivers/mmc/zynq_sdhci.c                      | 230
> +++++++++++++++++++++++++-
>  include/sdhci.h                               |   9 +
>  include/zynqmp_tap_delay.h                    |  20 +++
>  7 files changed, 550 insertions(+), 10 deletions(-)  create mode 100644
> board/xilinx/zynqmp/tap_delays.c  create mode 100644
> include/zynqmp_tap_delay.h
> 
> --
> 2.7.4