[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Jaehoon Chung]

Hi Siva,

On 01/16/2018 07:10 PM, Siva Durga Prasad Paladugu wrote:
> Hi Jaehoon,
> 
> Any review comments on this.

Thanks for reminding. Will check! :)

Best Regards,
Jaehoon Chung
> 
> Thanks,
> Siva
> 
>> -----Original Message-----
>> From: Siva Durga Prasad Paladugu [mailto:siva.durga.paladugu at xilinx.com]
>> Sent: Thursday, January 04, 2018 3:11 PM
>> To: u-boot at lists.denx.de
>> Cc: jh80.chung at samsung.com; Siva Durga Prasad Paladugu
>> <sivadur at xilinx.com>
>> Subject: [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP
>>
>> This patch series is meant to add SD3.0 support for ZynqMP platform.
>> The first five patches in the series mostly setting up things in sdhci layer to
>> support SD3.0 , the sixth patch is to add SD3.0 support for ZynqMP
>> platform and the last patch is to enable this support for ZynqMP zcu102
>> rev1.0 eval board.
>>
>> Repo: u-boot-mmc.git
>> Branch: hs200-working
>>
>> Siva Durga Prasad Paladugu (7):
>>   mmc: sdhci: Add support for disabling clock
>>   mmc: sdhci: Handle execute tuning command in sdhci_send_command
>>   sdhci: Add new sdhci ops for platform specific tuning and delays
>>   mmc: sdhci: Invoke platform specific tuning and delay routines
>>   mmc : sdhci: Read capabilities register1 and update host caps
>>   mmc: zynq_sdhci: Add support for SD3.0
>>   zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board
>>
>>  board/xilinx/zynqmp/Makefile                  |   2 +
>>  board/xilinx/zynqmp/tap_delays.c              | 230
>> ++++++++++++++++++++++++++
>>  configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
>>  drivers/mmc/sdhci.c                           |  67 +++++++-
>>  drivers/mmc/zynq_sdhci.c                      | 230
>> +++++++++++++++++++++++++-
>>  include/sdhci.h                               |   9 +
>>  include/zynqmp_tap_delay.h                    |  20 +++
>>  7 files changed, 550 insertions(+), 10 deletions(-)  create mode 100644
>> board/xilinx/zynqmp/tap_delays.c  create mode 100644
>> include/zynqmp_tap_delay.h
>>
>> --
>> 2.7.4
> 
> 
> 
>