[U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output

[Stefan Roese]

On 20.01.2018 13:18, Andreas Färber wrote:
> Fix a typo in help output (awailable -> available).
> Tidy the grammar - not the board connects to a port, we do.
> 
> While at it, be consistent in upper-casing the comments.
> 
> Fixes: eee4835d22 ("tools: Add Marvell recovery image download script")
> Cc: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Igal Liberman <igall at marvell.com>
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
>   tools/mrvl_uart.sh | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/tools/mrvl_uart.sh b/tools/mrvl_uart.sh
> index 500fa117eb..6824208902 100755
> --- a/tools/mrvl_uart.sh
> +++ b/tools/mrvl_uart.sh
> @@ -46,13 +46,13 @@ then
>       echo -e "\nMarvell recovery image downloader for Armada SoC family."
>       echo -e "Command syntax:"
>       echo -e "\t$(basename $0) <port> <file> [2|4|8]"
> -    echo -e "\tport  - serial port the target board connected to"
> +    echo -e "\tport  - serial port the target board is connected to"
>       echo -e "\tfile  - recovery boot image for target download"
>       echo -e "\t2|4|8 - times to increase the default serial port speed by"
>       echo -e "For example - load the image over ttyUSB0 @ 460800 baud:"
>       echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n"
>       echo -e "=====WARNING====="
> -    echo -e "- The speed-up option is not awailable in SoC families prior to A8K+"
> +    echo -e "- The speed-up option is not available in SoC families prior to A8K+"
>       echo -e "- This utility is not compatible with Armada 37xx SoC family\n"
>   fi
>   
> @@ -111,7 +111,7 @@ stty -F $port raw ignbrk time 5 $fast_baudrate
>   sx -vv $file > $port < $port
>   #sx-at91 $port $file
>   
> -# return the port to the default speed
> +# Return the port to the default speed
>   stty -F $port raw ignbrk time 5 $default_baudrate
>   
>   # Optional - fire up Minicom
> 

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan