[U-Boot] [PATCH] tools/mrvl_uart.sh: Tidy script output

[Kostya Porotchkin]

> -----Original Message-----
> From: Andreas Färber [mailto:afaerber at suse.de]
> Sent: Saturday, January 20, 2018 14:19
> To: u-boot at lists.denx.de
> Cc: Andreas Färber; Kostya Porotchkin; Stefan Roese; Igal Liberman
> Subject: [PATCH] tools/mrvl_uart.sh: Tidy script output
> 
> Fix a typo in help output (awailable -> available).
> Tidy the grammar - not the board connects to a port, we do.
> 
> While at it, be consistent in upper-casing the comments.
> 
> Fixes: eee4835d22 ("tools: Add Marvell recovery image download script")
> Cc: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Igal Liberman <igall at marvell.com>
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
>  tools/mrvl_uart.sh | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/tools/mrvl_uart.sh b/tools/mrvl_uart.sh index
> 500fa117eb..6824208902 100755
> --- a/tools/mrvl_uart.sh
> +++ b/tools/mrvl_uart.sh
> @@ -46,13 +46,13 @@ then
>      echo -e "\nMarvell recovery image downloader for Armada SoC
> family."
>      echo -e "Command syntax:"
>      echo -e "\t$(basename $0) <port> <file> [2|4|8]"
> -    echo -e "\tport  - serial port the target board connected to"
> +    echo -e "\tport  - serial port the target board is connected to"
>      echo -e "\tfile  - recovery boot image for target download"
>      echo -e "\t2|4|8 - times to increase the default serial port speed
> by"
>      echo -e "For example - load the image over ttyUSB0 @ 460800 baud:"
>      echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n"
>      echo -e "=====WARNING====="
> -    echo -e "- The speed-up option is not awailable in SoC families
> prior to A8K+"
> +    echo -e "- The speed-up option is not available in SoC families
> prior to A8K+"
>      echo -e "- This utility is not compatible with Armada 37xx SoC
> family\n"
>  fi
> 
> @@ -111,7 +111,7 @@ stty -F $port raw ignbrk time 5 $fast_baudrate  sx -
> vv $file > $port < $port
>  #sx-at91 $port $file
> 
> -# return the port to the default speed
> +# Return the port to the default speed
>  stty -F $port raw ignbrk time 5 $default_baudrate
> 
>  # Optional - fire up Minicom
> --
> 2.13.6
[Konstantin Porotchkin]
Reviewed-by: Konstantin Porotchkin <kostap at marvell.com>