[U-Boot] [PATCH v3 2/2] Enable test case with A20-OLinuXino-Lime2
Stefan Mavrodiev
stefan.mavrodiev at gmail.com
Tue Jan 2 11:01:39 UTC 2018
On 12/26/2017 11:47 AM, Jagan Teki wrote:
> On Fri, Dec 22, 2017 at 3:30 PM, Stefan Mavrodiev <stefan at olimex.com> wrote:
>> Driver testing is done with A20-OLinuXino-Lime2. Testing
>> requirements are:
>> - Exposing spi0 alternative pins in the dts file
>> - Add alias node, enabling driver probing
>> - Enable spi flash related options in the defconfig file
>>
>> The testing log is:
>> U-Boot SPL 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 - 11:39:48)
>> DRAM: 1024 MiB
>> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
>> Trying to boot from sunxi SPI
>>
>>
>> U-Boot 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 - 11:39:48 +0200) Allwinner Technology
>>
>> CPU: Allwinner A20 (SUN7I)
>> Model: Olimex A20-OLinuXino-LIME2
> Lime2 doen't have in-built spi-nor is it?
We have some prototypes with this option.
>
>> I2C: ready
>> DRAM: 1 GiB
>> MMC: SUNXI SD/MMC: 0
>> MMC: no card present
>> mmc_init: -123, time 1
>> *** Warning - MMC init failed, using default environment
> you lost the env? since it's spi-nor better to use flash env.
What's the point since this is only test case?
>
>> In: serial
>> Out: serial
>> Err: serial
>> Allwinner mUSB OTG (Peripheral)
>> SCSI: SATA link 0 timeout.
>> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>> flags: ncq stag pm led clo only pmp pio slum part ccc apst
>> Net: No ethernet found.
>> starting USB...
>> USB0: USB EHCI 1.00
>> USB1: USB OHCI 1.0
>> USB2: USB EHCI 1.00
>> USB3: USB OHCI 1.0
>> scanning bus 0 for devices... 1 USB Device(s) found
>> scanning bus 2 for devices... 1 USB Device(s) found
>> scanning usb for storage devices... 0 Storage Device(s) found
>> Hit any key to stop autoboot: 0
>> => sspi
>>
>> => sf probe
>> SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> try to use erase/write and read commands to verify
# Erase one sector
=> sf erase 0x1000 0x100
SF: 256 bytes @ 0x1000 Erased: ERROR
=> sf erase 0x1000 0x1000
SF: 4096 bytes @ 0x1000 Erased: OK
# Get some random data
=> md.b 0x50000000 0x100
50000000: d6 4d d0 7e 93 d8 0f 48 1b ef 7f 7e be 4e a8 5d .M.~...H...~.N.]
50000010: fd 9f e5 7f 2f 7b 5b 19 ed de d8 58 99 7a 24 da ..../{[....X.z$.
50000020: ef dd 9c 45 d7 97 ab 4f e7 fb ee 61 bc de 6a 1a ...E...O...a..j.
50000030: 9a 9f f4 3a be 4b 2f f3 ce 77 87 7e 07 23 af ff ...:.K/..w.~.#..
50000040: e5 e5 c0 fa 65 e2 78 9b 16 38 42 52 e5 6c 52 0d ....e.x..8BR.lR.
50000050: f5 ff da 94 7f 98 96 d7 f0 9d 66 ae 9b b9 a2 cd ..........f.....
50000060: 0b dd f1 c9 1d 3b fe 5b cf ef d6 ce 8b c5 fd 56 .....;.[.......V
50000070: e2 52 eb 78 d4 f1 bf 57 56 6a 57 58 52 f1 0e 9d .R.x...WVjWXR...
50000080: df be f8 19 bf cf d7 ac 4b 3e 86 21 3f c3 fe 3e ........K>.!?..>
50000090: ea 27 52 ca 1f 79 bd 7b ef bf 96 c9 9d f6 81 d3 .'R..y.{........
500000a0: cc 2e 8b c8 34 7f c5 2f 29 19 a8 dc 54 7a 07 1d ....4../)...Tz..
500000b0: f4 e6 db ed 38 03 59 bb 31 ee b3 dd 5c e6 be 58 ....8.Y.1...\..X
500000c0: a6 7c 87 61 84 47 e0 b1 a1 fc 6e d3 d5 93 bf 8a .|.a.G....n.....
500000d0: 5d a3 be 4b cf 07 1d 92 ff 36 f9 46 fb 5a cb 8f ]..K.....6.F.Z..
500000e0: f9 27 7a b8 7b 07 2e 22 a1 ee 56 bc a7 de 57 6a .'z.{.."..V...Wj
500000f0: da d4 7d 7f ee db 7a e2 bc 5c 44 64 b7 fc ea 3e ..}...z..\Dd...
# Write one page to spi-nor
=> sf write 0x50000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Written: OK
# Readback data
=> sf read 0x51000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Read: OK
# Compare data
=> cmp.b 0x50000000 0x51000000 0x100
Total of 256 byte(s) were the same
>
>> => sf test 0 100000
>> SPI flash test:
>> 0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps
>> 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
>> 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
>> 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
>> Test passed
>> 0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps
>> 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps
>> 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps
>> 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps
>> =>
>>
>> Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
>> ---
>> arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 21 +++++++++++++++++++++
>> configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
>> 2 files changed, 29 insertions(+)
>>
>> diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
>> index d5c796c..3c708da 100644
>> --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
>> +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
>> @@ -54,6 +54,7 @@
>>
>> aliases {
>> serial0 = &uart0;
>> + spi0 = &spi0;
>> };
>>
>> chosen {
>> @@ -215,6 +216,20 @@
>> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> };
>>
>> + spi0_pins_b: spi0 at 1 {
>> + allwinner,pins = "PC0", "PC1", "PC2";
>> + allwinner,function = "spi0";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + spi0_cs0_pins_b: spi0_cs0 at 1 {
>> + allwinner,pins = "PC23";
>> + allwinner,function = "spi0";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> usb0_id_detect_pin: usb0_id_detect_pin at 0 {
>> allwinner,pins = "PH4";
>> allwinner,function = "gpio_in";
>> @@ -257,6 +272,12 @@
>> status = "okay";
>> };
>>
>> +&spi0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>;
>> + status = "okay";
>> +};
>> +
>> &uart0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&uart0_pins_a>;
>> diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
>> index 1edc844..c499e3d 100644
>> --- a/configs/A20-OLinuXino-Lime2_defconfig
>> +++ b/configs/A20-OLinuXino-Lime2_defconfig
>> @@ -30,3 +30,11 @@ CONFIG_SCSI=y
>> CONFIG_USB_EHCI_HCD=y
>> CONFIG_USB_MUSB_GADGET=y
>> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SF_TEST=y
> Ok, but not useful to include in config's
>
>> +CONFIG_CMD_SPI=y
> this command is not needed, since the current usage on your board as
> spi-nor flash
Regards,
Stefan Mavrodiev
More information about the U-Boot
mailing list