[U-Boot] [PATCH 5/6] sunxi: usb_phy: Clear PHYCTL register before writing

[Jun Nie]

PHYCTL register offset at 0x10 need to be cleared before it's
written. Ported from below Linux patch.
  d699c1d phy: sun4i-usb: change PHYCTL register clearing code

Signed-off-by: Jun Nie <jun.nie at linaro.org>
---
 arch/arm/mach-sunxi/usb_phy.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index 2f1cad1..1a6b4b4 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -156,8 +156,14 @@ __maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
 static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
 {
 #if defined CONFIG_MACH_SUNXI_H3_H5
-	if (phy->id == 0)
+	if (phy->id == 0) {
+#if defined(CONFIG_USB_MUSB_HOST)
 		clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
+#else
+		setbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
+		writel(0, SUNXI_USB0_BASE + SUNXI_USB_CSR);
+#endif
+	}
 #endif
 	clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
 }
-- 
1.9.1