[U-Boot] [PATCH] ARM: socfpga: Convert callers of cm_write_with_phase for wait_for_bit_le32

[Marek Vasut]

On 01/26/2018 05:28 PM, Tom Rini wrote:
> Now that we have and use wait_for_bit_le32() available, the callers of
> cm_write_with_phase() should not be casting values to u32 and instead we
> expect a const void *, so provide that directly.
> 
> Fixes: 48263504c8d5 ("wait_bit: use wait_for_bit_le32 and remove wait_for_bit")
> Cc: Marek Vasut <marex at denx.de>
> Signed-off-by: Tom Rini <trini at konsulko.com>

Reviewed-by: Marek Vasut <marex at denx.de>

> ---
>  arch/arm/mach-socfpga/clock_manager_gen5.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-socfpga/clock_manager_gen5.c b/arch/arm/mach-socfpga/clock_manager_gen5.c
> index 3d048ba3e432..4e5b6d169371 100644
> --- a/arch/arm/mach-socfpga/clock_manager_gen5.c
> +++ b/arch/arm/mach-socfpga/clock_manager_gen5.c
> @@ -33,7 +33,7 @@ static void cm_write_ctrl(u32 val)
>  }
>  
>  /* function to write a clock register that has phase information */
> -static int cm_write_with_phase(u32 value, u32 reg_address, u32 mask)
> +static int cm_write_with_phase(u32 value, const void *reg_address, u32 mask)
>  {
>  	int ret;
>  
> @@ -268,26 +268,26 @@ int cm_basic_init(const struct cm_config * const cfg)
>  	 * are aligned nicely; so we can change any phase.
>  	 */
>  	ret = cm_write_with_phase(cfg->ddrdqsclk,
> -				  (u32)&clock_manager_base->sdr_pll.ddrdqsclk,
> +				  &clock_manager_base->sdr_pll.ddrdqsclk,
>  				  CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
>  	if (ret)
>  		return ret;
>  
>  	/* SDRAM DDR2XDQSCLK */
>  	ret = cm_write_with_phase(cfg->ddr2xdqsclk,
> -				  (u32)&clock_manager_base->sdr_pll.ddr2xdqsclk,
> +				  &clock_manager_base->sdr_pll.ddr2xdqsclk,
>  				  CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
>  	if (ret)
>  		return ret;
>  
>  	ret = cm_write_with_phase(cfg->ddrdqclk,
> -				  (u32)&clock_manager_base->sdr_pll.ddrdqclk,
> +				  &clock_manager_base->sdr_pll.ddrdqclk,
>  				  CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
>  	if (ret)
>  		return ret;
>  
>  	ret = cm_write_with_phase(cfg->s2fuser2clk,
> -				  (u32)&clock_manager_base->sdr_pll.s2fuser2clk,
> +				  &clock_manager_base->sdr_pll.s2fuser2clk,
>  				  CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
>  	if (ret)
>  		return ret;
> 


-- 
Best regards,
Marek Vasut