[U-Boot] FIT nand boot fail to load U-Boot proper
Jagan Teki
jagannadh.teki at gmail.com
Fri Jan 5 11:55:40 UTC 2018
I have not debugged much on this, just to check whether the same
feature work for others or not?
SPL is unable to load U-Boot proper, which is fit formatted of two dtb
bundle, but normal U-Boot proper loads fine.
Log:
----
>>spl:board_init_r()
spl_early_init()
Trying to boot from NAND
: 512 MiB
nand_spl_load_image offset:0x00200000 len:64 page:512
Found FIT
nand_spl_load_image offset:0x00200000 len:1052 page:512
fit read sector 200000, sectors=1052, dst=177ff980, count=1052
Selecting config 'imx6q-icore'firmware: 'firmware at 1'
nand_spl_load_image offset:0x0020041c len:510672 page:512
image: dst=17800000, offset=41c, size=7cad0
Selecting config 'imx6q-icore'fdt: 'fdt at 1'
nand_spl_load_image offset:0x0027ceec len:30884 page:636
image: dst=1787cb00, offset=7ceec, size=78a4
Selecting config 'imx6q-icore'cannot find property 'loadables': -1
if entry = 0x0, load = 0x17800000
entry = 0x17800000, load = 0x17800000
Jumping to U-Boot
loaded - jumping to U-Boot...
image entry point: 0x17800000
<< hang >>
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list