[U-Boot] [PATCH v8 02/11] board: common:vid: Add LS1088A VID Supported voltage values

[Rajesh Bhagat]

Adds below voltage values supported by LS1088A Soc:

1.025 V(default), 0.9875V, 0.9750 V, 0.9V, 1.0 V, 1.0125 V, 1.0250 V

Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
---
Changes in v8:                                                                  
 - Created a different vdd array for LS1088A

Changes in v7:                                                                  
 None                                                                           

Changes in v6:                                                                  
 None                                                                           
                                                                                
Changes in v5:                                                                  
 None                                                                           
                                                                                
Changes in v4:                                                                  
 None 

 board/freescale/common/vid.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index d6d1bfc..bf63ce0 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -295,6 +295,43 @@ int adjust_vdd(ulong vdd_override)
 	int ret, i2caddress;
 	unsigned long vdd_string_override;
 	char *vdd_string;
+#ifdef CONFIG_ARCH_LS1088A
+	static const uint16_t vdd[32] = {
+		10250,
+		9875,
+		9750,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		9000,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		10000,  /* 1.0000V */
+		10125,
+		10250,
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+		0,      /* reserved */
+	};
+
+#else
 	static const uint16_t vdd[32] = {
 		10500,
 		0,      /* reserved */
@@ -329,6 +366,7 @@ int adjust_vdd(ulong vdd_override)
 		0,      /* reserved */
 		0,      /* reserved */
 	};
+#endif
 	struct vdd_drive {
 		u8 vid;
 		unsigned voltage;
-- 
2.7.4