[U-Boot] [PATCH] LS2088ARDB: Fix NOR fall back option failure

[York Sun]

On 01/08/2018 10:03 PM, Vinitha Pillai-B57223 wrote:
> From: Vinitha V Pillai <vinitha.pillai at nxp.com>
> 
> Signed-off-by: Vinitha V Pillai <vinitha.pillai at nxp.com>
> ---
>  include/configs/ls2080ardb.h | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
> index 6f3301c..8770c6b 100644
> --- a/include/configs/ls2080ardb.h
> +++ b/include/configs/ls2080ardb.h
> @@ -375,7 +375,7 @@ unsigned long get_board_sys_clk(void);
>  	"fdt_high=0xa0000000\0"			\
>  	"initrd_high=0xffffffffffffffff\0"	\
>  	"fdt_addr=0x64f00000\0"			\
> -	"kernel_addr=0x65000000\0"		\
> +	"kernel_addr=0x581000000\0"		\

Why change this?

>  	"kernel_start=0x1000000\0"		\
>  	"kernelheader_start=0x800000\0"		\
>  	"scriptaddr=0x80000000\0"		\
> @@ -445,8 +445,8 @@ unsigned long get_board_sys_clk(void);
>  			"&& esbc_validate 0x20780000; "			\
>  			"env exists mcinitcmd && "			\
>  			"fsl_mc lazyapply dpl 0x20d00000; "		\
> -			"run distro_bootcmd;env exists secureboot "	\
> -			" && esbc_halt;run qspi_bootcmd; "
> +			"run distro_bootcmd;run qspi_bootcmd; "		\
> +			"env exists secureboot && esbc_halt;"
>  #elif defined(CONFIG_SD_BOOT)
>  /* Try to boot an on-SD kernel first, then do normal distro boot */
>  #define CONFIG_BOOTCOMMAND						\
> @@ -456,16 +456,16 @@ unsigned long get_board_sys_clk(void);
>  			"env exists mcinitcmd && run mcinitcmd "	\
>  			"&& mmc read 0x88000000 0x6800 0x800 "		\
>  			"&& fsl_mc lazyapply dpl 0x88000000; "		\
> -			"run distro_bootcmd;env exists secureboot "	\
> -			"&& esbc_halt;run sd_bootcmd;"
> +			"run distro_bootcmd;run sd_bootcmd; "		\
> +			"env exists secureboot && esbc_halt;"
>  #else
>  /* Try to boot an on-NOR kernel first, then do normal distro boot */
>  #define CONFIG_BOOTCOMMAND						\
>  			"env exists mcinitcmd && env exists secureboot "\
>  			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
>  			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
> -			"run distro_bootcmd; env exists secureboot "	\
> -			"&& esbc_halt; run nor_bootcmd;"
> +			"run distro_bootcmd;run nor_bootcmd; "		\
> +			"env exists secureboot && esbc_halt;"
>  #endif
>  
>  /* MAC/PHY configuration */
> 

You changed not only NOR boot, but also QSPI and SD boot. Please update
your subject and write commit message to explain.

York