[U-Boot] FW: u-boot v2016 vs v2013

[Fabio Estevam]

On Wed, Jan 24, 2018 at 9:57 AM, Mehmet Ali İPİN
<mehmet.ipin at pavotek.com.tr> wrote:
> Dear Estevam,
>
> Thank you very much; With your helps managed to use u-boot 2018, gcc 7.2 and SPL, generated
> u-boot.img image and downloaded into board.
>
> SD card and e-MMC working well. Ethernet Phy is also answering mii info as shown below:
>
> => mii info
> PHY 0x05: OUI = 0x0885, Model = 0x21, Rev = 0x01,  10baseT, HDX
> => setenv ipadr 10.0.0.10
> => dhcp
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Could not initialize PHY FEC
> BOOTP broadcast 1
> BOOTP broadcast 2
> .
> .
> .
> BOOTP broadcast 17
>
> Retry time exceeded; starting again.
>
> I would be grateful, if you Have any idea how can I test and solve the dhcp command?

It's hard to understand what could be wrong without seeing your code
nor schematics.

Are you able to get Ethernet working in Linux?