[U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC

[Stefan Roese]

On 08.01.2018 04:17, Chris Packham wrote:
> The DB-88F6820-AMC connects ethernet at 34000 and ethernet at 70000 which are
> labeled as eth2 and eth0 in armada-38x.dts. The ethernet at 30000 (eth1) is
> not used on the AMC board.
> 
> This eliminates the following bootup message
> 
>    Device 'ethernet at 70000': seq 0 is in use by 'ethernet at 34000'
> 
> Signed-off-by: Chris Packham <judge.packham at gmail.com>
> ---
> 
>   arch/arm/dts/armada-385-amc.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts
> index 5e1588d57438..d4d127fa024b 100644
> --- a/arch/arm/dts/armada-385-amc.dts
> +++ b/arch/arm/dts/armada-385-amc.dts
> @@ -53,7 +53,7 @@
>   
>   	aliases {
>   		ethernet0 = &eth0;
> -		ethernet1 = &eth1;
> +		ethernet1 = &eth2;
>   		i2c0 = &i2c0;
>   		spi1 = &spi1;
>   	};
> 

Applied to u-boot-marvell/master

Thanks,
Stefan