[U-Boot] [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board support

[Bhaskar Upadhaya]

>-----Original Message-----
>From: York Sun
>Sent: Tuesday, January 09, 2018 1:10 AM
>To: Bhaskar Upadhaya <bhaskar.upadhaya at nxp.com>; u-boot at lists.denx.de
>Subject: Re: [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board
>support
>
>On 11/29/2017 09:13 PM, Bhaskar Upadhaya wrote:
>> LS1012A-2G5RDB belongs to LS1012A family with features
>> 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART
>>
>> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya at nxp.com>
>> ---
>> changes for v3:
>>  1. remove pfe driver changes from this patch  2. remove PCIe, DSPI
>> from ls1012a2g5rdb_qspi_defconfig
>>
>
><snip>
>
>> diff --git a/board/freescale/ls1012ardb/ls1012ardb.c
>> b/board/freescale/ls1012ardb/ls1012ardb.c
>> index 41283db..9675335 100644
>> --- a/board/freescale/ls1012ardb/ls1012ardb.c
>> +++ b/board/freescale/ls1012ardb/ls1012ardb.c
>> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
>>
>>  int checkboard(void)
>>  {
>> +#ifdef CONFIG_TARGET_LS1012ARDB
>>  	u8 in1;
>>
>>  	puts("Board: LS1012ARDB ");
>> @@ -57,6 +58,9 @@ int checkboard(void)
>>  		puts(": bank2\n");
>>  	else
>>  		puts("unknown\n");
>> +#else
>> +	puts("Board: LS1012A2G5RDB ");
>> +#endif
>>
>>  	return 0;
>>  }
>> @@ -148,10 +152,12 @@ int esdhc_status_fixup(void *blob, const char
>*compat)
>>  	 *	10 - eMMC Memory
>>  	 *	11 - SPI
>>  	 */
>> +#ifdef CONFIG_TARGET_LS1012ARDB
>>  	if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
>>  		printf("Error reading i2c boot information!\n");
>>  		return 0; /* Don't want to hang() on this error */
>>  	}
>> +#endif
>>
>>  	mux_sdhc2 = (io & 0x0c) >> 2;
>>  	/* Enable SDHC2 only when use SDIO wifi and eMMC */
>
>Bhaskar,
>
>Please double check changes to this file. I am seeing compiling errors related to
>I2C_MUX_IO_ADDR, I2C_MUX_IO_1, SW_REV_MASK, SW_REV_D for
>ls1012a2g5rdb_qspi on top of master branch.
>
>York
York,
	This patch needs to be re spin because it modifies file " board/freescale/ls1012ardb/eth.c " which is introduced by PFE patch set which are still under discussion.
	So will send another rev of this patch which will remove the file "board/freescale/ls1012ardb/eth.c "