[U-Boot] [RESEND PATCH v2 12/27] cfi_flash: Remove unnecessary braces
Mario Six
mario.six at gdsys.cc
Mon Jan 15 10:02:18 UTC 2018
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
v1 -> v2:
None
---
drivers/mtd/cfi_flash.c | 48 ++++++++++++++++++++++++------------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index a21c407ed7..0a24e9173a 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -611,7 +611,7 @@ static int flash_full_status_check(flash_info_t *info, flash_sect_t sector,
case CFI_CMDSET_INTEL_PROG_REGIONS:
case CFI_CMDSET_INTEL_EXTENDED:
case CFI_CMDSET_INTEL_STANDARD:
- if ((retcode == ERR_OK) &&
+ if (retcode == ERR_OK &&
!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
retcode = ERR_INVAL;
printf("Flash %s error at address %lx\n", prompt,
@@ -758,7 +758,7 @@ static flash_sect_t find_sector(flash_info_t *info, ulong addr)
static flash_info_t *saved_info; /* previously used flash bank */
flash_sect_t sector = saved_sector;
- if ((info != saved_info) || (sector >= info->sector_count))
+ if (info != saved_info || sector >= info->sector_count)
sector = 0;
while ((info->start[sector] < addr) &&
@@ -1059,7 +1059,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
puts("Can't erase unknown flash type - aborted\n");
return 1;
}
- if ((s_first < 0) || (s_first > s_last)) {
+ if (s_first < 0 || s_first > s_last) {
puts("- no sectors to erase\n");
return 1;
}
@@ -1247,7 +1247,7 @@ void flash_print_info(flash_info_t *info)
printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X",
info->device_id2);
}
- if ((info->vendor == CFI_CMDSET_AMD_STANDARD) && (info->legacy_unlock))
+ if (info->vendor == CFI_CMDSET_AMD_STANDARD && info->legacy_unlock)
printf("\n Advanced Sector Protection (PPB) enabled");
printf("\n Erase timeout: %ld ms, write timeout: %ld ms\n",
info->erase_blk_tout,
@@ -1291,7 +1291,7 @@ void flash_print_info(flash_info_t *info)
#define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \
if (flash_verbose) { \
dots -= dots_sub; \
- if ((scale > 0) && (dots <= 0)) { \
+ if (scale > 0 && dots <= 0) { \
if ((digit % 5) == 0) \
printf("%d", digit / 5); \
else \
@@ -1577,7 +1577,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
* On some of Intel's flash chips (marked via legacy_unlock)
* unprotect unprotects all locking.
*/
- if ((prot == 0) && (info->legacy_unlock)) {
+ if (prot == 0 && info->legacy_unlock) {
flash_sect_t i;
for (i = 0; i < info->sector_count; i++) {
@@ -1636,10 +1636,10 @@ static void cfi_reverse_geometry(struct cfi_qry *qry)
u32 tmp;
for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
- tmp = get_unaligned(&(qry->erase_region_info[i]));
- put_unaligned(get_unaligned(&(qry->erase_region_info[j])),
- &(qry->erase_region_info[i]));
- put_unaligned(tmp, &(qry->erase_region_info[j]));
+ tmp = get_unaligned(&qry->erase_region_info[i]);
+ put_unaligned(get_unaligned(&qry->erase_region_info[j]),
+ &qry->erase_region_info[i]);
+ put_unaligned(tmp, &qry->erase_region_info[j]);
}
}
@@ -1919,11 +1919,11 @@ static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry)
* in compatibility mode
*/
if (/* x8/x16 in x8 mode */
- ((info->chipwidth == FLASH_CFI_BY8) &&
- (info->interface == FLASH_CFI_X8X16)) ||
+ (info->chipwidth == FLASH_CFI_BY8 &&
+ info->interface == FLASH_CFI_X8X16) ||
/* x16/x32 in x16 mode */
- ((info->chipwidth == FLASH_CFI_BY16) &&
- (info->interface == FLASH_CFI_X16X32)))
+ (info->chipwidth == FLASH_CFI_BY16 &&
+ info->interface == FLASH_CFI_X16X32))
{
info->addr_unlock1 = 0xaaa;
info->addr_unlock2 = 0x555;
@@ -2040,8 +2040,8 @@ static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry)
* There's an app note from Numonyx on this issue.
* So adjust the buffer size for M29EW while operating in 8-bit mode
*/
- if (((qry->max_buf_write_size) > 0x8) &&
- (info->device_id == 0x7E) &&
+ if (qry->max_buf_write_size > 0x8 &&
+ info->device_id == 0x7E &&
(info->device_id2 == 0x2201 ||
info->device_id2 == 0x2301 ||
info->device_id2 == 0x2801 ||
@@ -2081,8 +2081,8 @@ ulong flash_get_size(phys_addr_t base, int banknum)
info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi(info, &qry)) {
- info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id)));
- info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr)));
+ info->vendor = le16_to_cpu(get_unaligned(&qry.p_id));
+ info->ext_addr = le16_to_cpu(get_unaligned(&qry.p_adr));
num_erase_regions = qry.num_erase_regions;
if (info->ext_addr) {
@@ -2146,8 +2146,8 @@ ulong flash_get_size(phys_addr_t base, int banknum)
size_ratio = info->portwidth / info->chipwidth;
/* if the chip is x8/x16 reduce the ratio by half */
- if ((info->interface == FLASH_CFI_X8X16) &&
- (info->chipwidth == FLASH_CFI_BY8)) {
+ if (info->interface == FLASH_CFI_X8X16 &&
+ info->chipwidth == FLASH_CFI_BY8) {
size_ratio >>= 1;
}
debug("size_ratio %d port %d bits chip %d bits\n",
@@ -2157,7 +2157,7 @@ ulong flash_get_size(phys_addr_t base, int banknum)
/* multiply the size by the number of chips */
info->size *= size_ratio;
max_size = cfi_flash_bank_size(banknum);
- if (max_size && (info->size > max_size)) {
+ if (max_size && info->size > max_size) {
debug("[truncated from %ldMiB]", info->size >> 20);
info->size = max_size;
}
@@ -2172,7 +2172,7 @@ ulong flash_get_size(phys_addr_t base, int banknum)
}
tmp = le32_to_cpu(get_unaligned(
- &(qry.erase_region_info[i])));
+ &qry.erase_region_info[i]));
debug("erase region %u: 0x%08lx\n", i, tmp);
erase_region_count = (tmp & 0xffff) + 1;
@@ -2261,8 +2261,8 @@ ulong flash_get_size(phys_addr_t base, int banknum)
/* round up when converting to ms */
info->write_tout = (tmp + 999) / 1000;
info->flash_id = FLASH_MAN_CFI;
- if ((info->interface == FLASH_CFI_X8X16) &&
- (info->chipwidth == FLASH_CFI_BY8)) {
+ if (info->interface == FLASH_CFI_X8X16 &&
+ info->chipwidth == FLASH_CFI_BY8) {
/* XXX - Need to test on x8/x16 in parallel. */
info->portwidth >>= 1;
}
--
2.11.0
More information about the U-Boot
mailing list