[U-Boot] [PATCH 3/3] mtd: nand: mxs_nand_spl: Remove nand size print

[Jagan Teki]

It is not much needed to print nand size in SPL during nand boot,
and most of nand spl drivers doesn't print the same.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Note: currently it is showing 
: 512 MiB can be fixed as
NAND: 512 MiB

but I didn't see any need of showing nand size here.

 drivers/mtd/nand/mxs_nand_spl.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
index b6c9208..910f76d 100644
--- a/drivers/mtd/nand/mxs_nand_spl.c
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -153,7 +153,6 @@ static int mxs_nand_init(void)
 	nand_chip.numchips = 1;
 
 	/* identify flash device */
-	puts(": ");
 	if (mxs_flash_ident(mtd)) {
 		printf("Failed to identify\n");
 		return -1;
@@ -167,7 +166,6 @@ static int mxs_nand_init(void)
 	mtd->size = nand_chip.chipsize;
 	nand_chip.scan_bbt(mtd);
 
-	printf("%llu MiB\n", (mtd->size / (1024 * 1024)));
 	return 0;
 }
 
-- 
2.7.4