[U-Boot] [PATCH v7 02/13] wait_bit: use wait_for_bit_le32 instead of wait_for_bit
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Thu Jan 11 01:50:00 UTC 2018
On 10.01.2018 21:26, Álvaro Fernández Rojas wrote:
> wait_for_bit callers use the 32 bit LE version
>
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
> ---
> v7: Introduce changes suggested by Jagan Teki:
> - Remove wait_for_bit and update callers to wait_for_bit_le32.
>
> arch/arm/mach-imx/mx6/ddr.c | 22 ++++-----
> arch/arm/mach-socfpga/clock_manager.c | 4 +-
> arch/arm/mach-socfpga/clock_manager_gen5.c | 8 ++--
> arch/arm/mach-socfpga/reset_manager_arria10.c | 36 +++++++--------
> arch/mips/mach-ath79/ar934x/clk.c | 2 +-
> board/samtec/vining_2000/vining_2000.c | 4 +-
> drivers/clk/clk_pic32.c | 12 ++---
> drivers/clk/renesas/clk-rcar-gen3.c | 4 +-
> drivers/ddr/microchip/ddr2.c | 8 ++--
> drivers/fpga/socfpga_arria10.c | 17 +++----
> drivers/mmc/msm_sdhci.c | 8 ++--
> drivers/mtd/pic32_flash.c | 4 +-
> drivers/net/ag7xxx.c | 16 +++----
> drivers/net/dwc_eth_qos.c | 17 +++----
> drivers/net/ethoc.c | 8 ++--
> drivers/net/pic32_eth.c | 12 ++---
> drivers/net/pic32_mdio.c | 28 ++++++------
> drivers/net/ravb.c | 4 +-
> drivers/net/xilinx_axi_emac.c | 4 +-
> drivers/net/zynq_gem.c | 12 ++---
> drivers/reset/sti-reset.c | 4 +-
> drivers/serial/serial_pic32.c | 4 +-
> drivers/spi/atmel_spi.c | 4 +-
> drivers/spi/cadence_qspi_apb.c | 14 +++---
> drivers/spi/fsl_qspi.c | 20 ++++-----
> drivers/spi/mvebu_a3700_spi.c | 20 +++++----
> drivers/usb/host/dwc2.c | 24 +++++-----
> drivers/usb/host/ehci-msm.c | 3 +-
> drivers/usb/host/ehci-mx6.c | 5 +--
> drivers/usb/host/ohci-lpc32xx.c | 12 ++---
> drivers/usb/host/xhci-rcar.c | 12 ++---
> drivers/video/atmel_hlcdfb.c | 64 +++++++++++++--------------
> 32 files changed, 207 insertions(+), 209 deletions(-)
>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
nits below
>
> diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
> index dc743e113d..a39f9c5c86 100644
> --- a/drivers/net/ravb.c
> +++ b/drivers/net/ravb.c
> @@ -222,8 +222,8 @@ static int ravb_reset(struct udevice *dev)
> writel(CCC_OPC_CONFIG, eth->iobase + RAVB_REG_CCC);
>
> /* Check the operating mode is changed to the config mode. */
> - return wait_for_bit(dev->name, (void *)eth->iobase + RAVB_REG_CSR,
> - CSR_OPS_CONFIG, true, 100, true);
> + return wait_for_bit_le32((void *)eth->iobase + RAVB_REG_CSR,
> + CSR_OPS_CONFIG, true, 100, true);
the cast to (void *) is not necessary anymore
> }
>
> static void ravb_base_desc_init(struct ravb_priv *eth)
> diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
> index 9a2a578ff9..55fa1e49d5 100644
> --- a/drivers/net/xilinx_axi_emac.c
> +++ b/drivers/net/xilinx_axi_emac.c
> @@ -366,8 +366,8 @@ static int axi_ethernet_init(struct axidma_priv *priv)
> * processor mode and hence bypass in this mode
> */
> if (!priv->eth_hasnobuf) {
> - err = wait_for_bit(__func__, (const u32 *)®s->is,
> - XAE_INT_MGTRDY_MASK, true, 200, false);
> + err = wait_for_bit_le32((const u32 *)®s->is,
> + XAE_INT_MGTRDY_MASK, true, 200, false);
the cast to (const u32 *) is not necessary anymore
> if (err) {
> printf("%s: Timeout\n", __func__);
> return 1;
--
- Daniel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180111/1220465e/attachment.sig>
More information about the U-Boot
mailing list