[U-Boot] [PATCH v2 7/9] mmc: compile out erase and write mmc commands if write operations are not enabled
Jean-Jacques Hiblot
jjhiblot at ti.com
Thu Jan 4 14:23:34 UTC 2018
Also remove erase_grp_size and write_bl_len from struct mmc as they are
not used anymore. On ARM, removing them saves about 100 bytes of code
space in SPL.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
Changes in v2: None
cmd/mmc.c | 8 ++++++++
drivers/mmc/mmc.c | 16 ++++++++++++++--
include/mmc.h | 2 ++
3 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/cmd/mmc.c b/cmd/mmc.c
index 9a95293..65601d8 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -45,8 +45,10 @@ static void print_mmcinfo(struct mmc *mmc)
printf("Bus Width: %d-bit%s\n", mmc->bus_width,
mmc->ddr_mode ? " DDR" : "");
+#if CONFIG_IS_ENABLED(MMC_WRITE)
puts("Erase Group Size: ");
print_size(((u64)mmc->erase_grp_size) << 9, "\n");
+#endif
if (!IS_SD(mmc) && mmc->version >= MMC_VERSION_4_41) {
bool has_enh = (mmc->part_support & ENHNCD_SUPPORT) != 0;
@@ -302,6 +304,8 @@ static int do_mmc_read(cmd_tbl_t *cmdtp, int flag,
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
}
+
+#if CONFIG_IS_ENABLED(MMC_WRITE)
static int do_mmc_write(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
@@ -360,6 +364,8 @@ static int do_mmc_erase(cmd_tbl_t *cmdtp, int flag,
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
}
+#endif
+
static int do_mmc_rescan(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
@@ -792,8 +798,10 @@ static int do_mmc_bkops_enable(cmd_tbl_t *cmdtp, int flag,
static cmd_tbl_t cmd_mmc[] = {
U_BOOT_CMD_MKENT(info, 1, 0, do_mmcinfo, "", ""),
U_BOOT_CMD_MKENT(read, 4, 1, do_mmc_read, "", ""),
+#if CONFIG_IS_ENABLED(MMC_WRITE)
U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""),
U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""),
+#endif
U_BOOT_CMD_MKENT(rescan, 1, 1, do_mmc_rescan, "", ""),
U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
U_BOOT_CMD_MKENT(dev, 3, 0, do_mmc_dev, "", ""),
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index fd94987..3930aad 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -2066,9 +2066,11 @@ static int mmc_startup_v4(struct mmc *mmc)
}
if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
+#if CONFIG_IS_ENABLED(MMC_WRITE)
/* Read out group size from ext_csd */
mmc->erase_grp_size =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
+#endif
/*
* if high capacity and partition setting completed
* SEC_COUNT is valid even if it is smaller than 2 GiB
@@ -2082,7 +2084,9 @@ static int mmc_startup_v4(struct mmc *mmc)
capacity *= MMC_MAX_BLOCK_LEN;
mmc->capacity_user = capacity;
}
- } else {
+ }
+#if CONFIG_IS_ENABLED(MMC_WRITE)
+ else {
/* Calculate the group size from the csd value. */
int erase_gsz, erase_gmul;
@@ -2091,7 +2095,7 @@ static int mmc_startup_v4(struct mmc *mmc)
mmc->erase_grp_size = (erase_gsz + 1)
* (erase_gmul + 1);
}
-
+#endif
mmc->hc_wp_grp_size = 1024
* ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
* ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
@@ -2222,11 +2226,13 @@ static int mmc_startup(struct mmc *mmc)
mmc->dsr_imp = ((cmd.response[1] >> 12) & 0x1);
mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf);
+#if CONFIG_IS_ENABLED(MMC_WRITE)
if (IS_SD(mmc))
mmc->write_bl_len = mmc->read_bl_len;
else
mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf);
+#endif
if (mmc->high_capacity) {
csize = (mmc->csd[1] & 0x3f) << 16
@@ -2248,8 +2254,10 @@ static int mmc_startup(struct mmc *mmc)
if (mmc->read_bl_len > MMC_MAX_BLOCK_LEN)
mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+#if CONFIG_IS_ENABLED(MMC_WRITE)
if (mmc->write_bl_len > MMC_MAX_BLOCK_LEN)
mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
+#endif
if ((mmc->dsr_imp) && (0xffffffff != mmc->dsr)) {
cmd.cmdidx = MMC_CMD_SET_DSR;
@@ -2273,7 +2281,9 @@ static int mmc_startup(struct mmc *mmc)
/*
* For SD, its erase group is always one sector
*/
+#if CONFIG_IS_ENABLED(MMC_WRITE)
mmc->erase_grp_size = 1;
+#endif
mmc->part_config = MMCPART_NOAVAILABLE;
err = mmc_startup_v4(mmc);
@@ -2304,7 +2314,9 @@ static int mmc_startup(struct mmc *mmc)
/* Fix the block length for DDR mode */
if (mmc->ddr_mode) {
mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+#if CONFIG_IS_ENABLED(MMC_WRITE)
mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
+#endif
}
/* fill in device description */
diff --git a/include/mmc.h b/include/mmc.h
index f50c714..3abeb58 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -585,8 +585,10 @@ struct mmc {
uint tran_speed;
uint legacy_speed; /* speed for the legacy mode provided by the card */
uint read_bl_len;
+#if CONFIG_IS_ENABLED(MMC_WRITE)
uint write_bl_len;
uint erase_grp_size; /* in 512-byte sectors */
+#endif
uint hc_wp_grp_size; /* in 512-byte sectors */
#if CONFIG_IS_ENABLED(MMC_WRITE)
struct sd_ssr ssr; /* SD status register */
--
1.9.1
More information about the U-Boot
mailing list