[U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support

[Sumit Garg]

From: Vinitha Pillai-B57223 <vinitha.pillai at nxp.com>

Enable validation of boot.scr script prior to its execution dependent
on "secureboot" flag in environment. Enable fall back option to
qspi boot in case of secure boot.

Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
Signed-off-by: Vinitha Pillai <vinitha.pillai at nxp.com>
---

Changes in v2:
Rebased to top of master

 configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 14 +++++++-------
 include/configs/ls1012ardb.h                  | 20 ++++++++++++++++++--
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
index b6930be..2d5d9ad 100644
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@@ -2,7 +2,9 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1012ARDB=y
 CONFIG_SECURE_BOOT=y
 CONFIG_FSL_LS_PPA=y
+CONFIG_QSPI_AHB_INIT=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -12,7 +14,7 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
-CONFIG_HUSH_PARSER=y
+# CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -20,16 +22,13 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_NETDEVICES=y
@@ -42,6 +41,7 @@ CONFIG_SYS_NS16550=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index ab139b0..d161bb8 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -72,16 +72,20 @@
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x00f00000\0"			\
 	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x800000\0"		\
 	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernel_addr_r=0x81000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
 	BOOTENV					\
 	"boot_scripts=ls1012ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
 	"scan_dev_for_boot_part="		\
 	     "part list ${devtype} ${devnum} devplist; "	\
 	     "env exists devplist || setenv devplist 1; "	\
@@ -99,15 +103,27 @@
 			"run scan_dev_for_scripts; "	  \
 		"done;"					  \
 		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
 	"installer=load mmc 0:2 $load_addr "	\
 		   "/flex_installer_arm64.itb; "	\
 		   "bootm $load_addr#$board\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
 
 #include <asm/fsl_secure_boot.h>
 
-- 
1.9.1