[U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro secure boot support

[York Sun]

On 01/08/2018 09:59 PM, Sumit Garg wrote:
> From: Vinitha Pillai-B57223 <vinitha.pillai at nxp.com>
> 
> Enable validation of boot.scr script prior to its execution dependent
> on "secureboot" flag in environment. Enable fall back option to
> qspi boot in case of secure boot.
> 
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> Signed-off-by: Vinitha Pillai <vinitha.pillai at nxp.com>
> ---
> 
> Changes in v2:
> Rebased to top of master
> 
>  configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 14 +++++++-------
>  include/configs/ls1012ardb.h                  | 20 ++++++++++++++++++--
>  2 files changed, 25 insertions(+), 9 deletions(-)
> 
> diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
> index b6930be..2d5d9ad 100644
> --- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
> +++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
> @@ -2,7 +2,9 @@ CONFIG_ARM=y
>  CONFIG_TARGET_LS1012ARDB=y
>  CONFIG_SECURE_BOOT=y
>  CONFIG_FSL_LS_PPA=y
> +CONFIG_QSPI_AHB_INIT=y
>  CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
> +CONFIG_DISTRO_DEFAULTS=y
>  # CONFIG_SYS_MALLOC_F is not set
>  CONFIG_FIT_VERBOSE=y
>  CONFIG_OF_BOARD_SETUP=y
> @@ -12,7 +14,7 @@ CONFIG_QSPI_BOOT=y
>  CONFIG_BOOTDELAY=10
>  CONFIG_USE_BOOTARGS=y
>  CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
> -CONFIG_HUSH_PARSER=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
>  CONFIG_CMD_GREPENV=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_I2C=y
> @@ -20,16 +22,13 @@ CONFIG_CMD_MMC=y
>  CONFIG_CMD_PCI=y
>  CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
>  CONFIG_CMD_CACHE=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
>  CONFIG_OF_CONTROL=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>  CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_DM=y
> +# CONFIG_BLK is not set
> +CONFIG_DM_MMC=y
>  CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH=y
>  CONFIG_NETDEVICES=y
> @@ -42,6 +41,7 @@ CONFIG_SYS_NS16550=y
>  CONFIG_DM_SPI=y
>  CONFIG_FSL_DSPI=y
>  CONFIG_USB=y
> +CONFIG_DM_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
>  CONFIG_USB_STORAGE=y

Why do you change other config options in this patch?

York