[U-Boot] reading ubi from a NAND for programming to other devices

Lukasz Majewski lukma at denx.de
Fri Jan 26 09:24:13 UTC 2018


Hi Tim,

> Greetings,
> 
> I'm looking to understand what methods are available for
> reading/writing ubi/ubifs from an existing NAND flash in order to
> duplicate the contents onto another device in U-Boot, Linux, and with
> JTAG flashing for production.

You may want to check if nanddump / nandwrite will work for you (but
those are Linux utils, not available in u-boot).

http://git.infradead.org/mtd-utils.git/tree/HEAD:/nand-utils

> 
> Typically I create ubi's using ubinize then I can use U-Boot 'nand
> erase' and 'nand write' or JTAG to write the ubi without issues.
> However if I use U-Boot 'nand read' to read a ubi then write it back
> using the same method I get 'ubi0 warning: ubi_io_read: error -74 (ECC
> error)' and 'ubi0 error: ubi_io_read: error -74 (ECC error)' messages
> from Linux when its mounted. I find I run into the same problem when
> JTAG programming ubi's: no issues when using a ubi created via ubinize
> but when flashing one that came from a U-Boot 'nand read' I see ubi
> errors when mounting it.
> 
> Some testing shows me that I can't use U-Boot nand read/erase/write
> once U-Boot has 'attached' the UBI (via the U-Boot 'ubi part' command)
> which scans and re-sizes the volume.
> 
> If I on the other hand take a ubi from U-Boot 'nand read' and use
> Linux ubiformat to flash that onto a new device I get no ubi
> warnings/errors when its mounted. My understanding is that ubiformat
> is simply preserving erase counters but there must be something else
> its doing.
> 
> What's going on here and what can I do in U-Boot/JTAG to properly
> write ubi that's been read from an existing system? I'm hoping there
> is a method that doesn't require iterating over the individual volumes
> within the ubi.
> 
> Best Regards,
> 
> Tim
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180126/69c4d726/attachment.sig>


More information about the U-Boot mailing list