[U-Boot] [PATCH] mx6: ddr: Do not access MMDC_P1_BASE_ADDR on i.MX6ULL

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

i.MX6ULL also does not have a MMDC_P1_BASE_ADDR, so do not try to
access it.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/mach-imx/mx6/ddr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
index 52a9a25..39dbd2f 100644
--- a/arch/arm/mach-imx/mx6/ddr.c
+++ b/arch/arm/mach-imx/mx6/ddr.c
@@ -908,7 +908,7 @@ void mx6sdl_dram_iocfg(unsigned width,
 #define MR(val, ba, cmd, cs1) \
 	((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
 #define MMDC1(entry, value) do {					  \
-	if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())			  \
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl())	  \
 		mmdc1->entry = value;					  \
 	} while (0)
 
@@ -1215,7 +1215,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
 	u16 mem_speed = ddr3_cfg->mem_speed;
 
 	mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
-	if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl())
 		mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
 
 	/* Limit mem_speed for MX6D/MX6Q */
-- 
2.7.4