[U-Boot] [PATCH v3 19/20] clk: rockchip: clk_rk3288: Implement "assign-clock-parent" and "assign-clock-rate"
David Wu
david.wu at rock-chips.com
Sat Jan 13 06:06:33 UTC 2018
The RK3288 CRU-node assigns rates to a number of clocks that are not
implemented in the RK3288 clock-driver (but which have been
sufficiently initialised from rkclk_init()): for these clocks, we
implement the gmac clock set parent, but simply ignore the
others' set_rate() operation and return 0 to signal success.
Signed-off-by: David Wu <david.wu at rock-chips.com>
---
Changes in v3:
- New patch
Changes in v2: None
drivers/clk/rockchip/clk_rk3288.c | 106 ++++++++++++++++++++++++++++++---
include/dt-bindings/clock/rk3288-cru.h | 1 +
2 files changed, 99 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c
index b64c107..baa8122 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -295,15 +295,42 @@ static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div)
return 0;
}
-static int rockchip_mac_set_clk(struct rk3288_cru *cru,
- int periph, uint freq)
+static int rockchip_mac_set_clk(struct rk3288_cru *cru, uint freq)
{
- /* Assuming mac_clk is fed by an external clock */
- rk_clrsetreg(&cru->cru_clksel_con[21],
- RMII_EXTCLK_MASK,
- RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT);
+ ulong ret;
- return 0;
+ /*
+ * The gmac clock can be derived either from an external clock
+ * or can be generated from internally by a divider from SCLK_MAC.
+ */
+ if (readl(&cru->cru_clksel_con[21]) & RMII_EXTCLK_MASK) {
+ /* An external clock will always generate the right rate... */
+ ret = freq;
+ } else {
+ u32 con = readl(&cru->cru_clksel_con[21]);
+ ulong pll_rate;
+ u8 div;
+
+ if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) ==
+ EMAC_PLL_SELECT_GENERAL)
+ pll_rate = GPLL_HZ;
+ else if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) ==
+ EMAC_PLL_SELECT_CODEC)
+ pll_rate = CPLL_HZ;
+ else
+ pll_rate = NPLL_HZ;
+
+ div = DIV_ROUND_UP(pll_rate, freq) - 1;
+ if (div <= 0x1f)
+ rk_clrsetreg(&cru->cru_clksel_con[21], MAC_DIV_CON_MASK,
+ div << MAC_DIV_CON_SHIFT);
+ else
+ debug("Unsupported div for gmac:%d\n", div);
+
+ return DIV_TO_RATE(pll_rate, div);
+ }
+
+ return ret;
}
static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf,
@@ -744,7 +771,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
break;
#ifndef CONFIG_SPL_BUILD
case SCLK_MAC:
- new_rate = rockchip_mac_set_clk(priv->cru, clk->id, rate);
+ new_rate = rockchip_mac_set_clk(priv->cru, rate);
break;
case DCLK_VOP0:
case DCLK_VOP1:
@@ -797,6 +824,17 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
case SCLK_SARADC:
new_rate = rockchip_saradc_set_clk(priv->cru, rate);
break;
+ case PLL_GPLL:
+ case PLL_CPLL:
+ case PLL_NPLL:
+ case ACLK_CPU:
+ case HCLK_CPU:
+ case PCLK_CPU:
+ case ACLK_PERI:
+ case HCLK_PERI:
+ case PCLK_PERI:
+ case SCLK_UART0:
+ return 0;
default:
return -ENOENT;
}
@@ -804,9 +842,61 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
return new_rate;
}
+static int rk3288_gmac_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
+ struct rk3288_cru *cru = priv->cru;
+ const char *clock_output_name;
+ int ret;
+
+ /*
+ * If the requested parent is in the same clock-controller and
+ * the id is SCLK_MAC_PLL ("mac_pll_src"), switch to the internal
+ * clock.
+ */
+ if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_PLL)) {
+ debug("%s: switching GAMC to SCLK_MAC_PLL\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK, 0);
+ return 0;
+ }
+
+ /*
+ * Otherwise, we need to check the clock-output-names of the
+ * requested parent to see if the requested id is "ext_gmac".
+ */
+ ret = dev_read_string_index(parent->dev, "clock-output-names",
+ parent->id, &clock_output_name);
+ if (ret < 0)
+ return -ENODATA;
+
+ /* If this is "ext_gmac", switch to the external clock input */
+ if (!strcmp(clock_output_name, "ext_gmac")) {
+ debug("%s: switching GMAC to external clock\n", __func__);
+ rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK,
+ RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int rk3288_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ switch (clk->id) {
+ case SCLK_MAC:
+ return rk3288_gmac_set_parent(clk, parent);
+ case SCLK_USBPHY480M_SRC:
+ return 0;
+ }
+
+ debug("%s: unsupported clk %ld\n", __func__, clk->id);
+ return -ENOENT;
+}
+
static struct clk_ops rk3288_clk_ops = {
.get_rate = rk3288_clk_get_rate,
.set_rate = rk3288_clk_set_rate,
+ .set_parent = rk3288_clk_set_parent,
};
static int rk3288_clk_ofdata_to_platdata(struct udevice *dev)
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index 216eee5..e37113a 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -76,6 +76,7 @@
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_MAC_PLL 150
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
--
2.7.4
More information about the U-Boot
mailing list