[U-Boot] [PATCH v2 6/6] board/BuR: drop LCDC clock manipulation from board code

[Hannes Schmelzer]

The clock selection is done now from the am335x-fb code, so there is no
more need doing this in the board code.

Signed-off-by: Hannes Schmelzer <oe5hpm at oevsv.at>
---

Changes in v2: None

 board/BuR/brppt1/board.c | 3 ---
 board/BuR/brxre1/board.c | 2 --
 2 files changed, 5 deletions(-)

diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c
index 6083479..9f7b2d9 100644
--- a/board/BuR/brppt1/board.c
+++ b/board/BuR/brppt1/board.c
@@ -120,9 +120,6 @@ void am33xx_spl_board_init(void)
 	};
 	do_enable_clocks(clk_domains, clk_modules_tsspecific, 1);
 
-	/* setup LCD-Pixel Clock */
-	writel(0x2, &cmdpll->clklcdcpixelclk);	/* clock comes from perPLL M2 */
-
 	/* setup I2C */
 	enable_i2c_pin_mux();
 	i2c_set_bus_num(0);
diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c
index 856ac3d..e176b60 100644
--- a/board/BuR/brxre1/board.c
+++ b/board/BuR/brxre1/board.c
@@ -121,8 +121,6 @@ void am33xx_spl_board_init(void)
 		0
 	};
 	do_enable_clocks(clk_domains, clk_modules_xre1specific, 1);
-	/* setup LCD-Pixel Clock */
-	writel(0x2, CM_DPLL + 0x34);
 	/* power-OFF LCD-Display */
 	gpio_direction_output(LCD_PWR, 0);
 
-- 
2.7.4