[U-Boot] [PATCH 03/05] db820c: add qualcomm dragonboard 820C support
Jorge Ramirez
jorge.ramirez-ortiz at linaro.org
Mon Jan 8 08:38:10 UTC 2018
On 01/05/2018 11:29 AM, Jorge Ramirez-Ortiz wrote:
> This commit adds support for 96Boards Dragonboard820C.
any feedback on the series please? we'd appreciate having upstream
support for this board.
thanks!
>
> The board is based on APQ8086 Qualcomm Soc, complying with the
> 96Boards specification.
>
> Features
> - 4x Kyro CPU (64 bit) up to 2.15GHz
> - USB2.0
> - USB3.0
> - ISP
> - Qualcomm Hexagon DSP
> - SD 3.0 (UHS-I)
> - UFS 2.0
> - Qualcomm Adreno 530 GPU
> - GPS
> - BT 4.2
> - Wi-Fi 2.4GHz, 5GHz (802.11ac)
> - PCIe 2.0
> - MIPI-CSI, MIPI-DSI
> - I2S
>
> U-Boot boots chained from LK (LK implements the fastboot protocol) in
> 64-bit mode.
>
> For detailed build instructions see readme.txt in the board directory.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/dragonboard820c.dts | 65 +++
> arch/arm/mach-snapdragon/Kconfig | 10 +
> arch/arm/mach-snapdragon/Makefile | 2 +
> arch/arm/mach-snapdragon/clock-apq8096.c | 62 +++
> .../mach-snapdragon/include/mach/sysmap-apq8096.h | 29 ++
> arch/arm/mach-snapdragon/sysmap-apq8096.c | 32 ++
> board/qualcomm/dragonboard820c/Kconfig | 15 +
> board/qualcomm/dragonboard820c/MAINTAINERS | 6 +
> board/qualcomm/dragonboard820c/Makefile | 8 +
> board/qualcomm/dragonboard820c/dragonboard820c.c | 128 ++++++
> board/qualcomm/dragonboard820c/head.S | 34 ++
> board/qualcomm/dragonboard820c/readme.txt | 463 +++++++++++++++++++++
> board/qualcomm/dragonboard820c/u-boot.lds | 106 +++++
> configs/dragonboard820c_defconfig | 37 ++
> include/configs/dragonboard820c.h | 72 ++++
> 16 files changed, 1071 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/dragonboard820c.dts
> create mode 100644 arch/arm/mach-snapdragon/clock-apq8096.c
> create mode 100644 arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
> create mode 100644 arch/arm/mach-snapdragon/sysmap-apq8096.c
> create mode 100644 board/qualcomm/dragonboard820c/Kconfig
> create mode 100644 board/qualcomm/dragonboard820c/MAINTAINERS
> create mode 100644 board/qualcomm/dragonboard820c/Makefile
> create mode 100644 board/qualcomm/dragonboard820c/dragonboard820c.c
> create mode 100644 board/qualcomm/dragonboard820c/head.S
> create mode 100644 board/qualcomm/dragonboard820c/readme.txt
> create mode 100644 board/qualcomm/dragonboard820c/u-boot.lds
> create mode 100644 configs/dragonboard820c_defconfig
> create mode 100644 include/configs/dragonboard820c.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index a895c70..6d0587e 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -211,7 +211,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
> fsl-ls1012a-rdb.dtb \
> fsl-ls1012a-frdm.dtb
>
> -dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
> +dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
> +dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb
>
> dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
> stm32f769-disco.dtb
> diff --git a/arch/arm/dts/dragonboard820c.dts b/arch/arm/dts/dragonboard820c.dts
> new file mode 100644
> index 0000000..bad5a1e
> --- /dev/null
> +++ b/arch/arm/dts/dragonboard820c.dts
> @@ -0,0 +1,65 @@
> +/*
> + * Qualcomm APQ8096 based Dragonboard 820C board device tree source
> + *
> + * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +/dts-v1/;
> +
> +#include "skeleton64.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. DB820c";
> + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &blsp2_uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x80000000 0 0xc0000000>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + soc: soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + gcc: clock-controller at 300000 {
> + compatible = "qcom,gcc-msm8996";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + reg = <0x300000 0x90000>;
> + };
> +
> + blsp2_uart1: serial at 75b0000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x75b0000 0x1000>;
> + };
> +
> + sdhc2: sdhci at 74a4900 {
> + compatible = "qcom,sdhci-msm-v4";
> + reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
> + index = <0x0>;
> + bus-width = <4>;
> + clock = <&gcc 0>;
> + clock-frequency = <200000000>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig
> index dc7ba21..d55dc1a 100644
> --- a/arch/arm/mach-snapdragon/Kconfig
> +++ b/arch/arm/mach-snapdragon/Kconfig
> @@ -19,8 +19,18 @@ config TARGET_DRAGONBOARD410C
> - HDMI
> - 20-pin low speed and 40-pin high speed expanders, 4 LED, 3 buttons
>
> +config TARGET_DRAGONBOARD820C
> + bool "96Boards Dragonboard 820C"
> + help
> + Support for 96Boards Dragonboard 820C. This board complies with
> + 96Board Open Platform Specifications. Features:
> + - Qualcomm Snapdragon 820C SoC - APQ8096 (4xKyro CPU)
> + - 3GiB RAM
> + - 32GiB UFS drive
> +
> endchoice
>
> source "board/qualcomm/dragonboard410c/Kconfig"
> +source "board/qualcomm/dragonboard820c/Kconfig"
>
> endif
> diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile
> index 74f90dc..7f35c79 100644
> --- a/arch/arm/mach-snapdragon/Makefile
> +++ b/arch/arm/mach-snapdragon/Makefile
> @@ -4,6 +4,8 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> +obj-$(CONFIG_TARGET_DRAGONBOARD820C) += clock-apq8096.o
> +obj-$(CONFIG_TARGET_DRAGONBOARD820C) += sysmap-apq8096.o
> obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o
> obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o
> obj-y += clock-snapdragon.o
> diff --git a/arch/arm/mach-snapdragon/clock-apq8096.c b/arch/arm/mach-snapdragon/clock-apq8096.c
> new file mode 100644
> index 0000000..3224812
> --- /dev/null
> +++ b/arch/arm/mach-snapdragon/clock-apq8096.c
> @@ -0,0 +1,62 @@
> +/*
> + * Clock drivers for Qualcomm APQ8096
> + *
> + * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz at linaro.org>
> + *
> + * Based on Little Kernel driver, simplified
> + *
> + * SPDX-License-Identifier: BSD-3-Clause
> + */
> +
> +#include <common.h>
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <asm/io.h>
> +#include <linux/bitops.h>
> +#include "clock-snapdragon.h"
> +
> +/* GPLL0 clock control registers */
> +#define GPLL0_STATUS_ACTIVE BIT(30)
> +#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
> +
> +static const struct bcr_regs sdc_regs = {
> + .cfg_rcgr = SDCC2_CFG_RCGR,
> + .cmd_rcgr = SDCC2_CMD_RCGR,
> + .M = SDCC2_M,
> + .N = SDCC2_N,
> + .D = SDCC2_D,
> +};
> +
> +static const struct gpll0_ctrl gpll0_ctrl = {
> + .status = GPLL0_STATUS,
> + .status_bit = GPLL0_STATUS_ACTIVE,
> + .ena_vote = APCS_GPLL_ENA_VOTE,
> + .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
> +};
> +
> +static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
> +{
> + int div = 3;
> +
> + clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
> + clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
> + CFG_CLK_SRC_GPLL0);
> + clk_enable_gpll0(priv->base, &gpll0_ctrl);
> + clk_enable_cbc(priv->base + SDCC2_APPS_CBCR);
> +
> + return rate;
> +}
> +
> +ulong msm_set_rate(struct clk *clk, ulong rate)
> +{
> + struct msm_clk_priv *priv = dev_get_priv(clk->dev);
> +
> + switch (clk->id) {
> + case 0: /* SDC1 */
> + return clk_init_sdc(priv, rate);
> + break;
> + default:
> + return 0;
> + }
> +}
> diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
> new file mode 100644
> index 0000000..fb89de2
> --- /dev/null
> +++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8096.h
> @@ -0,0 +1,29 @@
> +/*
> + * Qualcomm APQ8096 sysmap
> + *
> + * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef _MACH_SYSMAP_APQ8096_H
> +#define _MACH_SYSMAP_APQ8096_H
> +
> +#define TLMM_BASE_ADDR (0x1010000)
> +
> +/* Strength (sdc1) */
> +#define SDC1_HDRV_PULL_CTL_REG (TLMM_BASE_ADDR + 0x0012D000)
> +
> +/* Clocks: (from CLK_CTL_BASE) */
> +#define GPLL0_STATUS (0x0000)
> +#define APCS_GPLL_ENA_VOTE (0x52000)
> +
> +#define SDCC2_BCR (0x14000) /* block reset */
> +#define SDCC2_APPS_CBCR (0x14004) /* branch control */
> +#define SDCC2_AHB_CBCR (0x14008)
> +#define SDCC2_CMD_RCGR (0x14010)
> +#define SDCC2_CFG_RCGR (0x14014)
> +#define SDCC2_M (0x14018)
> +#define SDCC2_N (0x1401C)
> +#define SDCC2_D (0x14020)
> +
> +#endif
> diff --git a/arch/arm/mach-snapdragon/sysmap-apq8096.c b/arch/arm/mach-snapdragon/sysmap-apq8096.c
> new file mode 100644
> index 0000000..cb6d1e4
> --- /dev/null
> +++ b/arch/arm/mach-snapdragon/sysmap-apq8096.c
> @@ -0,0 +1,32 @@
> +/*
> + * Qualcomm APQ8096 memory map
> + *
> + * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz at linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/armv8/mmu.h>
> +
> +static struct mm_region apq8096_mem_map[] = {
> + {
> + .virt = 0x0UL, /* Peripheral block */
> + .phys = 0x0UL, /* Peripheral block */
> + .size = 0x10000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> + PTE_BLOCK_NON_SHARE |
> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
> + }, {
> + .virt = 0x80000000UL, /* DDR */
> + .phys = 0x80000000UL, /* DDR */
> + .size = 0xC0000000UL,
> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> + PTE_BLOCK_INNER_SHARE
> + }, {
> + /* List terminator */
> + 0,
> + }
> +};
> +
> +struct mm_region *mem_map = apq8096_mem_map;
> diff --git a/board/qualcomm/dragonboard820c/Kconfig b/board/qualcomm/dragonboard820c/Kconfig
> new file mode 100644
> index 0000000..aff9af5
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_DRAGONBOARD820C
> +
> +config SYS_BOARD
> + default "dragonboard820c"
> +
> +config SYS_VENDOR
> + default "qualcomm"
> +
> +config SYS_SOC
> + default "apq8096"
> +
> +config SYS_CONFIG_NAME
> + default "dragonboard820c"
> +
> +endif
> diff --git a/board/qualcomm/dragonboard820c/MAINTAINERS b/board/qualcomm/dragonboard820c/MAINTAINERS
> new file mode 100644
> index 0000000..a157033
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/MAINTAINERS
> @@ -0,0 +1,6 @@
> +DRAGONBOARD820C BOARD
> +M: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> +S: Maintained
> +F: board/qualcomm/dragonboard820c/
> +F: include/configs/dragonboard820c.h
> +F: configs/dragonboard820c_defconfig
> diff --git a/board/qualcomm/dragonboard820c/Makefile b/board/qualcomm/dragonboard820c/Makefile
> new file mode 100644
> index 0000000..a1ce4b2
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at gmail.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y := dragonboard820c.o
> +extra-y += head.o
> diff --git a/board/qualcomm/dragonboard820c/dragonboard820c.c b/board/qualcomm/dragonboard820c/dragonboard820c.c
> new file mode 100644
> index 0000000..8f40ba4
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/dragonboard820c.c
> @@ -0,0 +1,128 @@
> +/*
> + * Board init file for Dragonboard 820C
> + *
> + * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <asm/arch/sysmap-apq8096.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/psci.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <asm/io.h>
> +#include <linux/bitops.h>
> +#include <asm/psci.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> + gd->ram_size = PHYS_SDRAM_SIZE;
> +
> + return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> +
> + gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> +
> + return 0;
> +}
> +
> +static void sdhci_power_init(void)
> +{
> + const uint32_t TLMM_PULL_MASK = 0x3;
> + const uint32_t TLMM_HDRV_MASK = 0x7;
> +
> + struct tlmm_cfg {
> + uint32_t bit; /* bit in the register */
> + uint8_t mask; /* mask clk/dat/cmd control */
> + uint8_t val;
> + };
> +
> + /* bit offsets in the sdc tlmm register */
> + enum { SDC1_DATA_HDRV = 0,
> + SDC1_CMD_HDRV = 3,
> + SDC1_CLK_HDRV = 6,
> + SDC1_DATA_PULL = 9,
> + SDC1_CMD_PULL = 11,
> + SDC1_CLK_PULL = 13,
> + SDC1_RCLK_PULL = 15,
> + };
> +
> + enum { TLMM_PULL_DOWN = 0x1,
> + TLMM_PULL_UP = 0x3,
> + TLMM_NO_PULL = 0x0,
> + };
> +
> + enum { TLMM_CUR_VAL_10MA = 0x04,
> + TLMM_CUR_VAL_16MA = 0x07,
> + };
> + int i;
> +
> + /* drive strength configs for sdhc pins */
> + const struct tlmm_cfg hdrv[] =
> + {
> + { SDC1_CLK_HDRV, TLMM_CUR_VAL_16MA, TLMM_HDRV_MASK, },
> + { SDC1_CMD_HDRV, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK, },
> + { SDC1_DATA_HDRV, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK, },
> + };
> +
> + /* pull configs for sdhc pins */
> + const struct tlmm_cfg pull[] =
> + {
> + { SDC1_CLK_PULL, TLMM_NO_PULL, TLMM_PULL_MASK, },
> + { SDC1_CMD_PULL, TLMM_PULL_UP, TLMM_PULL_MASK, },
> + { SDC1_DATA_PULL, TLMM_PULL_UP, TLMM_PULL_MASK, },
> + };
> +
> + const struct tlmm_cfg rclk[] =
> + {
> + { SDC1_RCLK_PULL, TLMM_PULL_DOWN, TLMM_PULL_MASK,},
> + };
> +
> + for (i = 0; i < ARRAY_SIZE(hdrv); i++)
> + clrsetbits_le32(SDC1_HDRV_PULL_CTL_REG,
> + hdrv[i].mask << hdrv[i].bit,
> + hdrv[i].val << hdrv[i].bit);
> +
> + for (i = 0; i < ARRAY_SIZE(pull); i++)
> + clrsetbits_le32(SDC1_HDRV_PULL_CTL_REG,
> + pull[i].mask << pull[i].bit,
> + pull[i].val << pull[i].bit);
> +
> + for (i = 0; i < ARRAY_SIZE(rclk); i++)
> + clrsetbits_le32(SDC1_HDRV_PULL_CTL_REG,
> + rclk[i].mask << rclk[i].bit,
> + rclk[i].val << rclk[i].bit);
> +}
> +
> +static void show_psci_version(void)
> +{
> + struct arm_smccc_res res;
> +
> + arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> + printf("PSCI: v%ld.%ld\n",
> + PSCI_VERSION_MAJOR(res.a0),
> + PSCI_VERSION_MINOR(res.a0));
> +}
> +
> +int board_init(void)
> +{
> + sdhci_power_init();
> + show_psci_version();
> +
> + return 0;
> +}
> +
> +void reset_cpu(ulong addr)
> +{
> + psci_system_reset();
> +}
> diff --git a/board/qualcomm/dragonboard820c/head.S b/board/qualcomm/dragonboard820c/head.S
> new file mode 100644
> index 0000000..06d82d5
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/head.S
> @@ -0,0 +1,34 @@
> +/*
> + * ARM64 header for proper chain-loading with Little Kernel.
> + *
> + * Little Kernel shipped with Dragonboard820C boots standard Linux images for
> + * ARM64. This file adds header that is required to boot U-Boot properly.
> + *
> + * For details see:
> + * https://www.kernel.org/doc/Documentation/arm64/booting.txt
> + *
> + * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <config.h>
> +
> +/*
> + * per document in linux/Doc/arm64/booting.text
> + */
> +.global _arm64_header
> +_arm64_header:
> + b _start
> + .word 0
> + .quad CONFIG_SYS_TEXT_BASE-PHYS_SDRAM_1 /* Image load offset, LE */
> + .quad 0 /* Effective size of kernel image, little-endian */
> + .quad 0 /* kernel flags, little-endian */
> + .quad 0 /* reserved */
> + .quad 0 /* reserved */
> + .quad 0 /* reserved */
> + .byte 0x41 /* Magic number, "ARM\x64" */
> + .byte 0x52
> + .byte 0x4d
> + .byte 0x64
> + .word 0 /* reserved (used for PE COFF offset) */
> diff --git a/board/qualcomm/dragonboard820c/readme.txt b/board/qualcomm/dragonboard820c/readme.txt
> new file mode 100644
> index 0000000..88adb85
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/readme.txt
> @@ -0,0 +1,459 @@
> +#
> +# (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +================================================================================
> + What is working (enough to boot a distro from SD card)
> +================================================================================
> + - UART
> + - SD card
> + - PSCI reset
> + - Environment in EXT4 partition 1 in SD card (check defconfig for details)
> + dont forget to insert the card in the SD slot before booting if you
> + are going to make mods to the environment
> +
> +================================================================================
> + Build & Run instructions
> +================================================================================
> +
> +1) Install mkbootimg and dtbTool from Codeaurora:
> +
> + git://codeaurora.org/quic/kernel/skales
> + commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me.
> +
> +2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do
> + CROSS_COMPILE="ccache aarch64-linux-gnu-"
> +
> +3) cd to the u-boot tree
> +
> + $ make dragonboard820c_config
> + $ make -j `nproc`
> +
> +4) generate fake, empty ramdisk (can have 0 bytes)
> +
> + $ touch rd
> +
> +5) Generate qualcomm device tree table with dtbTool
> +
> + $ dtbTool -o dt.img arch/arm/dts
> +
> +6) Generate Android boot image with mkbootimg:
> +
> + $ mkbootimg --kernel=u-boot-dtb.bin \
> + --output=u-boot.img \
> + --dt=dt.img \
> + --pagesize 4096 \
> + --base 0x80000000 \
> + --ramdisk=rd \
> + --cmdline=""
> +
> +7) Reboot the board into fastboot mode
> + - plug the board micro-usb to your laptop usb host.
> + - reboot the board with vol- button pressed
> +
> +8) Boot the uboot image using fastboot
> +
> + $ fastboot boot u-boot.img
> +
> + or flash it to the UFS drive boot partition:
> +
> + $ fastboot flash boot u-boot.img
> + $ fastboot reboot
> +
> +
> +================================================================================
> + To boot a linux kernel from SDHCI with the ROOTFS on an NFS share:
> +================================================================================
> +
> +1) create an EXT4 partition on the SD card (must be partition #1)
> +
> +2) build the kernel image and dtb (documented extensively somewhere else)
> +
> +3) copy the drivers to the NFS partition (ie: 192.168.1.2 /exports/db820c-rootfs)
> +
> +4) add the u-boot headers to the image:
> +
> + $ mkimage -A arm64 \
> + -O linux \
> + -C none \
> + -T kernel \
> + -a 0x80080000 \
> + -e 0x80080000 \
> + -n Dragonboard820c \
> + -d $kernel/arch/arm64/boot/Image \
> + uImage
> +
> +5) copy the generated uImage and the device tree binary to the SD card EXT4
> + partition
> +
> + $ cp uImage /mnt/boot/
> + $ cp apq8096-db820c.dtb /mnt/boot/
> +
> +6) on the SD card create /extlinux/extlinux.conf as follows:
> +
> + default nfs
> + prompt 1
> + timeout 10
> +
> + LABEL nfs
> + MENU NFS entry
> + LINUX /uImage
> + FDT /apq8096-db820c.dtb
> + APPEND root=/dev/nfs rw \
> + nfsroot=192.168.1.2:/exports/db829c-rootfs,v3,tcp \
> + rootwait \
> + ip=dhcp consoleblank=0 \
> + console=tty0 \
> + console=ttyMSM0,115200n8 \
> + earlyprintk earlycon=msm_serial_dm,0x75b0000 \
> + androidboot.bootdevice=624000.ufshc \
> + androidboot.verifiedbootstate=orange \
> + androidboot.ver0
> +
> +7) remove the SD card from the laptop and insert it back to the db820 board.
> + the SD card EXT4 partition#1 should contain:
> + /uImage
> + /apq8096-db820c.dtb
> + /extlinux/extlinux.conf
> +
> +8) reboot the db820 board
> +
> +================================================================================
> + Successful boot sequence
> +================================================================================
> +
> +Format: Log Type - Time(microsec) - Message - Optional Info
> +Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
> +S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
> +S - IMAGE_VARIANT_STRING=M8996LAB
> +S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
> +S - Boot Interface: UFS
> +S - Secure Boot: Off
> +S - Boot Config @ 0x00076044 = 0x000001c9
> +S - JTAG ID @ 0x000760f4 = 0x4003e0e1
> +S - OEM ID @ 0x000760f8 = 0x00000000
> +S - Serial Number @ 0x00074138 = 0x2e8844ce
> +S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000
> +S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
> +S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100
> +S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
> +S - Core 0 Frequency, 1228 MHz
> +B - 0 - PBL, Start
> +B - 10412 - bootable_media_detect_entry, Start
> +B - 47480 - bootable_media_detect_success, Start
> +B - 47481 - elf_loader_entry, Start
> +B - 49027 - auth_hash_seg_entry, Start
> +B - 49129 - auth_hash_seg_exit, Start
> +B - 82403 - elf_segs_hash_verify_entry, Start
> +B - 84905 - PBL, End
> +B - 86955 - SBL1, Start
> +B - 182969 - usb: hs_phy_nondrive_start
> +B - 183305 - usb: PLL lock success - 0x3
> +B - 186294 - usb: hs_phy_nondrive_finish
> +B - 190442 - boot_flash_init, Start
> +D - 30 - boot_flash_init, Delta
> +B - 197548 - sbl1_ddr_set_default_params, Start
> +D - 30 - sbl1_ddr_set_default_params, Delta
> +B - 205509 - boot_config_data_table_init, Start
> +D - 200659 - boot_config_data_table_init, Delta - (60 Bytes)
> +B - 410713 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
> +B - 415410 - Image Load, Start
> +D - 22570 - PMIC Image Loaded, Delta - (37272 Bytes)
> +B - 437980 - pm_device_init, Start
> +B - 443744 - PON REASON:PM0:0x200000061 PM1:0x200000021
> +B - 480161 - PM_SET_VAL:Skip
> +D - 40016 - pm_device_init, Delta
> +B - 482083 - pm_driver_init, Start
> +D - 2928 - pm_driver_init, Delta
> +B - 488671 - pm_sbl_chg_init, Start
> +D - 91 - pm_sbl_chg_init, Delta
> +B - 495442 - vsense_init, Start
> +D - 0 - vsense_init, Delta
> +B - 505171 - Pre_DDR_clock_init, Start
> +D - 396 - Pre_DDR_clock_init, Delta
> +B - 509045 - ddr_initialize_device, Start
> +B - 512766 - 8996 v3.x detected, Max frequency = 1.8 GHz
> +B - 522373 - ddr_initialize_device, Delta
> +B - 522404 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
> +B - 526247 - Basic DDR tests done
> +B - 594994 - clock_init, Start
> +D - 274 - clock_init, Delta
> +B - 598349 - Image Load, Start
> +D - 4331 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes)
> +B - 603808 - Image Load, Start
> +D - 5338 - APDP Image Loaded, Delta - (0 Bytes)
> +B - 612409 - usb: UFS Serial - 2f490ecf
> +B - 616801 - usb: fedl, vbus_low
> +B - 620431 - Image Load, Start
> +D - 55418 - QSEE Image Loaded, Delta - (1640572 Bytes)
> +B - 675849 - Image Load, Start
> +D - 2013 - SEC Image Loaded, Delta - (4096 Bytes)
> +B - 683413 - sbl1_efs_handle_cookies, Start
> +D - 457 - sbl1_efs_handle_cookies, Delta
> +B - 691892 - Image Load, Start
> +D - 14396 - QHEE Image Loaded, Delta - (254184 Bytes)
> +B - 706319 - Image Load, Start
> +D - 14061 - RPM Image Loaded, Delta - (223900 Bytes)
> +B - 721111 - Image Load, Start
> +D - 3233 - STI Image Loaded, Delta - (0 Bytes)
> +B - 727913 - Image Load, Start
> +D - 34709 - APPSBL Image Loaded, Delta - (748716 Bytes)
> +B - 762713 - SBL1, End
> +D - 680028 - SBL1, Delta
> +S - Flash Throughput, 94000 KB/s (2959024 Bytes, 31250 us)
> +S - DDR Frequency, 1017 MHz
> +Android Bootloader - UART_DM Initialized!!!
> +
> +[0] BUILD_VERSION=
> +[0] BUILD_DATE=16:07:51 - Nov 17 2017
> +[0] welcome to lk
> +[10] platform_init()
> +[10] target_init()
> +[10] RPM GLink Init
> +[10] Opening RPM Glink Port success
> +[10] Opening SSR Glink Port success
> +[20] Glink Connection between APPS and RPM established
> +[20] Glink Connection between APPS and RPM established
> +[40] UFS init success
> +[80] Qseecom Init Done in Appsbl
> +[80] secure app region addr=0x86600000 size=0x2200000[90] TZ App region notif returned with status:0 addr:86600000 size:35651584
> +[100] TZ App log region register returned with status:0 addr:916d4000 size:4096
> +[100] Qseecom TZ Init Done in Appsbl
> +[120] Loading cmnlib done
> +[120] qseecom_start_app: Loading app keymaster for the first time
> +[150] <8>keymaster: "\"KEYMASTER Init \""
> +[160] Selected panel: none
> +Skip panel configuration
> +[160] pm8x41_get_is_cold_boot: cold boot
> +[170] boot_verifier: Device is in ORANGE boot state.
> +[180] Device is unlocked! Skipping verification...
> +[180] Loading (boot) image (348160): start
> +[190] Loading (boot) image (348160): done
> +[190] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
> +[200] Your device has been unlocked and cant be trusted.
> +Wait for 5 seconds before proceeding
> +
> +[5200] mdtp: mdtp_img loaded
> +[5210] mdtp: is_test_mode: test mode is set to 1
> +[5210] mdtp: read_metadata: SUCCESS
> +[5230] LK SEC APP Handle: 0x1
> +[5230] Return value from recv_data: 14
> +[5240] Return value from recv_data: 14
> +[5250] Return value from recv_data: 14
> +[5260] DTB Total entry: 1, DTB version: 3
> +[5260] Using DTB entry 0x00000123/00000000/0x00000018/0 for device 0x00000123/00030001/0x00010018/0
> +[5270] cmdline: androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=2f490ecf androidboot.baseband=apq mdss_mdp.panel=0
> +[5290] Updating device tree: start
> +[5290] Updating device tree: done
> +[5290] Return value from recv_data: 14
> +[5300] RPM GLINK UnInit
> +[5300] Qseecom De-Init Done in Appsbl
> +[5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000
> +[5310] Jumping to kernel via monitor
> +
> +U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100)
> +Qualcomm-DragonBoard 820C
> +
> +DRAM: 3 GiB
> +PSCI: v1.0
> +MMC: sdhci at 74a4900: 0
> +In: serial at 75b0000
> +Out: serial at 75b0000
> +Err: serial at 75b0000
> +Net: Net Initialization Skipped
> +No ethernet found.
> +Hit any key to stop autoboot: 0
> +switch to partitions #0, OK
> +mmc0 is current device
> +Scanning mmc 0:1...
> +Found /extlinux/extlinux.conf
> +Retrieving file: /extlinux/extlinux.conf
> +433 bytes read in 71 ms (5.9 KiB/s)
> +1: nfs root
> +
> +Retrieving file: /uImage
> +19397184 bytes read in 2024 ms (9.1 MiB/s)
> +append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0
> +
> +Retrieving file: /apq8096-db820c.dtb
> +38134 bytes read in 37 ms (1005.9 KiB/s)
> +
> +## Booting kernel from Legacy Image at 95000000 ...
> + Image Name: Dragonboard820c
> + Image Type: AArch64 Linux Kernel Image (uncompressed)
> + Data Size: 19397120 Bytes = 18.5 MiB
> + Load Address: 80080000
> + Entry Point: 80080000
> + Verifying Checksum ... OK
> +## Flattened Device Tree blob at 93000000
> + Booting using the fdt blob at 0x93000000
> + Loading Kernel Image ... OK
> + Using Device Tree in place at 0000000093000000, end 000000009300c4f5
> +
> +Starting kernel ...
> +
> +[ 0.000000] Booting Linux on physical CPU 0x0
> +[ 0.000000] Linux version 4.11.3-30039-g5a922a1 (jramirez at igloo) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Wed Oct 18 10:21:11 CEST 2017
> +[ 0.000000] Boot CPU: AArch64 Processor [511f2112]
> +[ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000075b0000 (options '')
> +[ 0.000000] bootconsole [msm_serial_dm0] enabled
> +[ 0.000000] efi: Getting EFI parameters from FDT:
> +[ 0.000000] efi: UEFI not found.
> +[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
> +[ 0.000000] adsp at 8ea00000 (0x000000008ea00000--0x0000000090400000) overlaps with gpu at 8f200000 (0x000000008f200000--0x000000008f300000)
> +[ 0.000000] Reserved memory: created DMA memory pool at 0x000000008f200000, size 1 MiB
> +[ 0.000000] OF: reserved mem: initialized node gpu at 8f200000, compatible id shared-dma-pool
> +[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 8 MiB
> +[ 0.000000] OF: reserved mem: initialized node venus at 90400000, compatible id shared-dma-pool
> +[ 0.000000] cma: Reserved 128 MiB at 0x00000000b8000000
> +[ 0.000000] NUMA: No NUMA configuration found
> +[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
> +[ 0.000000] NUMA: Adding memblock [0x80000000 - 0x857fffff] on node 0
> +[ 0.000000] NUMA: Adding memblock [0x91800000 - 0xbfffffff] on node 0
> +[ 0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0xbfffffff]
> +[ 0.000000] NUMA: NODE_DATA [mem 0xb7fb6680-0xb7fb817f]
> +[ 0.000000] Zone ranges:
> +[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
> +[ 0.000000] Normal empty
> +[ 0.000000] Movable zone start for each node
> +[ 0.000000] Early memory node ranges
> +[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
> +[ 0.000000] node 0: [mem 0x0000000091800000-0x00000000bfffffff]
> +[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff]
> +[ 0.000000] psci: probing for conduit method from DT.
> +[ 0.000000] psci: PSCIv1.0 detected in firmware.
> +[ 0.000000] psci: Using standard PSCI v0.2 function IDs
> +[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
> +[ 0.000000] percpu: Embedded 23 pages/cpu @ffff8000de9a3000 s57240 r8192 d28776 u94208
> +[ 0.000000] pcpu-alloc: s57240 r8192 d28776 u94208 alloc=23*4096
> +[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
> +[ 0.000000] Detected PIPT I-cache on CPU0
> +[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 720293
> +[ 0.000000] Policy zone: Normal
> +[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0
> +console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange a
> +ndroidboot.ver0
> +[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> +[ 0.000000] software IO TLB [mem 0xd3fff000-0xd7fff000] (64MB) mapped at [ffff800053fff000-ffff800057ffefff]
> +[ 0.000000] Memory: 2644172K/2926908K available (11196K kernel code, 1470K rwdata, 5132K rodata, 1088K init, 449K bss, 151664K reserved, 131072K cma-reser
> +ved)
> +[ 0.000000] Virtual kernel memory layout:
> +[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
> +[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
> +[ 0.000000] .text : 0xffff000008080000 - 0xffff000008b70000 ( 11200 KB)
> +[ 0.000000] .rodata : 0xffff000008b70000 - 0xffff000009080000 ( 5184 KB)
> +[ 0.000000] .init : 0xffff000009080000 - 0xffff000009190000 ( 1088 KB)
> +[ 0.000000] .data : 0xffff000009190000 - 0xffff0000092ffa00 ( 1471 KB)
> +[ 0.000000] .bss : 0xffff0000092ffa00 - 0xffff00000937014c ( 450 KB)
> +[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
> +[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
> +[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
> +[ 0.000000] 0xffff7e0000000000 - 0xffff7e00037a93c0 ( 55 MB actual)
> +[ 0.000000] memory : 0xffff800000000000 - 0xffff8000dea4f000 ( 3562 MB)
> +[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> +[ 0.000000] Preemptible hierarchical RCU implementation.
> +[ 0.000000] Build-time adjustment of leaf fanout to 64.
> +[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
> +[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
> +[ 0.000000] NR_IRQS:64 nr_irqs:64 0
> +[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
> +[ 0.000000] GICv2m: range[mem 0x09bd0000-0x09bd0fff], SPI[544:639]
> +[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
> +[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
> +[ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
> +
> +[....]
> +
> +
> +Some kernel information:
> +
> +root at linaro-developer:~# cat /proc/cpuinfo
> +processor : 0
> +BogoMIPS : 38.40
> +Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
> +CPU implementer : 0x51
> +CPU architecture: 8
> +CPU variant : 0x1
> +CPU part : 0x211
> +CPU revision : 2
> +
> +processor : 1
> +BogoMIPS : 38.40
> +Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
> +CPU implementer : 0x51
> +CPU architecture: 8
> +CPU variant : 0x1
> +CPU part : 0x211
> +CPU revision : 2
> +
> +processor : 2
> +BogoMIPS : 38.40
> +Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
> +CPU implementer : 0x51
> +CPU architecture: 8
> +CPU variant : 0x1
> +CPU part : 0x205
> +CPU revision : 2
> +
> +processor : 3
> +BogoMIPS : 38.40
> +Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
> +CPU implementer : 0x51
> +CPU architecture: 8
> +CPU variant : 0x1
> +CPU part : 0x205
> +CPU revision : 2
> +
> +root at linaro-developer:~# uname -a
> +Linux linaro-developer 4.11.3-30039-g5a922a1 #1 SMP PREEMPT Wed Oct 18 10:21:11 CEST 2017 aarch64 GNU/Linux
> +
> +root at linaro-developer:~# cat /proc/cmdline
> +root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0
> +
> +root at linaro-developer:~# cat /proc/meminfo
> +MemTotal: 2776332 kB
> +MemFree: 2593696 kB
> +MemAvailable: 2561432 kB
> +Buffers: 0 kB
> +Cached: 94744 kB
> +SwapCached: 0 kB
> +Active: 43888 kB
> +Inactive: 72972 kB
> +Active(anon): 22968 kB
> +Inactive(anon): 24616 kB
> +Active(file): 20920 kB
> +Inactive(file): 48356 kB
> +Unevictable: 0 kB
> +Mlocked: 0 kB
> +SwapTotal: 0 kB
> +SwapFree: 0 kB
> +Dirty: 0 kB
> +Writeback: 0 kB
> +AnonPages: 22120 kB
> +Mapped: 29284 kB
> +Shmem: 25468 kB
> +Slab: 32876 kB
> +SReclaimable: 12924 kB
> +SUnreclaim: 19952 kB
> +KernelStack: 2144 kB
> +PageTables: 928 kB
> +NFS_Unstable: 0 kB
> +Bounce: 0 kB
> +WritebackTmp: 0 kB
> +CommitLimit: 1388164 kB
> +Committed_AS: 204192 kB
> +VmallocTotal: 135290290112 kB
> +VmallocUsed: 0 kB
> +VmallocChunk: 0 kB
> +AnonHugePages: 2048 kB
> +ShmemHugePages: 0 kB
> +ShmemPmdMapped: 0 kB
> +CmaTotal: 131072 kB
> +CmaFree: 130356 kB
> +HugePages_Total: 0
> +HugePages_Free: 0
> +HugePages_Rsvd: 0
> +HugePages_Surp: 0
> +Hugepagesize: 2048 kB
> diff --git a/board/qualcomm/dragonboard820c/u-boot.lds b/board/qualcomm/dragonboard820c/u-boot.lds
> new file mode 100644
> index 0000000..b84b4ac
> --- /dev/null
> +++ b/board/qualcomm/dragonboard820c/u-boot.lds
> @@ -0,0 +1,106 @@
> +/*
> + * Override linker script for fastboot-readable images
> + *
> + * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
> + *
> + * Based on arch/arm/cpu/armv8/u-boot.lds (Just add header)
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
> +OUTPUT_ARCH(aarch64)
> +ENTRY(_arm64_header)
> +SECTIONS
> +{
> + . = 0x00000000;
> +
> + . = ALIGN(8);
> + .text :
> + {
> + *(.__image_copy_start)
> + board/qualcomm/dragonboard820c/head.o (.text*)
> + CPUDIR/start.o (.text*)
> + *(.text*)
> + }
> +
> + . = ALIGN(8);
> + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> +
> + . = ALIGN(8);
> + .data : {
> + *(.data*)
> + }
> +
> + . = ALIGN(8);
> +
> + . = .;
> +
> + . = ALIGN(8);
> + .u_boot_list : {
> + KEEP(*(SORT(.u_boot_list*)));
> + }
> +
> + . = ALIGN(8);
> +
> + .efi_runtime : {
> + __efi_runtime_start = .;
> + *(efi_runtime_text)
> + *(efi_runtime_data)
> + __efi_runtime_stop = .;
> + }
> +
> + .efi_runtime_rel : {
> + __efi_runtime_rel_start = .;
> + *(.relaefi_runtime_text)
> + *(.relaefi_runtime_data)
> + __efi_runtime_rel_stop = .;
> + }
> +
> + . = ALIGN(8);
> +
> + .image_copy_end :
> + {
> + *(.__image_copy_end)
> + }
> +
> + . = ALIGN(8);
> +
> + .rel_dyn_start :
> + {
> + *(.__rel_dyn_start)
> + }
> +
> + .rela.dyn : {
> + *(.rela*)
> + }
> +
> + .rel_dyn_end :
> + {
> + *(.__rel_dyn_end)
> + }
> +
> + _end = .;
> +
> + . = ALIGN(8);
> +
> + .bss_start : {
> + KEEP(*(.__bss_start));
> + }
> +
> + .bss : {
> + *(.bss*)
> + . = ALIGN(8);
> + }
> +
> + .bss_end : {
> + KEEP(*(.__bss_end));
> + }
> +
> + /DISCARD/ : { *(.dynsym) }
> + /DISCARD/ : { *(.dynstr*) }
> + /DISCARD/ : { *(.dynamic*) }
> + /DISCARD/ : { *(.plt*) }
> + /DISCARD/ : { *(.interp*) }
> + /DISCARD/ : { *(.gnu*) }
> +}
> diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig
> new file mode 100644
> index 0000000..788ff28
> --- /dev/null
> +++ b/configs/dragonboard820c_defconfig
> @@ -0,0 +1,36 @@
> +CONFIG_ARM=y
> +CONFIG_ARM_SMCCC=y
> +CONFIG_ARCH_SNAPDRAGON=y
> +CONFIG_TARGET_DRAGONBOARD820C=y
> +CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C"
> +CONFIG_DEFAULT_DEVICE_TREE="dragonboard820c"
> +CONFIG_USE_BOOTARGS=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_BOOTARGS="console=ttyMSM0,115200n8"
> +CONFIG_SYS_PROMPT="dragonboard820c => "
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_BOOTEFI=y
> +CONFIG_EFI_LOADER=y
> +CONFIG_CMD_BOOTEFI_HELLO=y
> +CONFIG_CMD_PXE=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_PART=y
> +CONFIG_CMD_TIMER=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_MSM_SERIAL=y
> +CONFIG_MMC_SDHCI_MSM=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_DM_MMC=y
> +CONFIG_CLK=y
> +CONFIG_PSCI_RESET=y
> +CONFIG_ENV_IS_IN_EXT4=y
> +CONFIG_ENV_EXT4_INTERFACE="mmc"
> +CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1"
> +CONFIG_ENV_EXT4_FILE="/uboot.env"
> diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h
> new file mode 100644
> index 0000000..76bcaf8
> --- /dev/null
> +++ b/include/configs/dragonboard820c.h
> @@ -0,0 +1,72 @@
> +/*
> + * Board configuration file for Dragonboard 410C
> + *
> + * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIGS_DRAGONBOARD820C_H
> +#define __CONFIGS_DRAGONBOARD820C_H
> +
> +#include <linux/sizes.h>
> +#include <asm/arch/sysmap-apq8096.h>
> +
> +/* Physical Memory Map */
> +#define CONFIG_NR_DRAM_BANKS 2
> +
> +#define PHYS_SDRAM_SIZE 0xC0000000
> +#define PHYS_SDRAM_1 0x80000000
> +#define PHYS_SDRAM_1_SIZE 0x60000000
> +#define PHYS_SDRAM_2 0x100000000
> +#define PHYS_SDRAM_2_SIZE 0x5ea4ffff
> +
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +#define CONFIG_SYS_TEXT_BASE 0x80080000
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
> +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
> +#define CONFIG_SYS_BOOTM_LEN SZ_64M
> +#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard820c/u-boot.lds"
> +
> +/* Generic Timer Definitions */
> +#define COUNTER_FREQUENCY 19000000
> +
> +/* Partition table support */
> +#define HAVE_BLOCK_DEVICE
> +
> +/* BOOTP options */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +
> +#ifndef CONFIG_SPL_BUILD
> +#include <config_distro_defaults.h>
> +#include <config_distro_bootcmd.h>
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(MMC, mmc, 0)
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "loadaddr=0x95000000\0" \
> + "fdt_high=0xffffffffffffffff\0" \
> + "initrd_high=0xffffffffffffffff\0" \
> + "linux_image=uImage\0" \
> + "kernel_addr_r=0x95000000\0"\
> + "fdtfile=qcom/apq8096-db820c.dtb\0" \
> + "fdt_addr_r=0x93000000\0"\
> + "ramdisk_addr_r=0x91000000\0"\
> + "scriptaddr=0x90000000\0"\
> + "pxefile_addr_r=0x90100000\0"\
> + BOOTENV
> +
> +#define CONFIG_EXT4_WRITE
> +#define CONFIG_ENV_SIZE 0x4000
> +#define CONFIG_ENV_VARS_UBOOT_CONFIG
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
> +
> +/* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE 512
> +#define CONFIG_SYS_MAXARGS 64
> +
> +#endif
> --
> 2.7.4
More information about the U-Boot
mailing list