[U-Boot] [PATCH v6 10/11] mips: bmips: enable the SPI flash on the Sagem F at ST1704

[Álvaro Fernández Rojas]

It's a Winbond (w25x32) 4 MB SPI flash.

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---
 v6: no changes
 v5: sync with master
 v4: switch to CONFIG_BCM63XX_SPI
 v3: rename BCM6338 SPI driver to BCM6348
 v2: remove spi alias

 arch/mips/dts/sagem,f at st1704.dts     | 12 ++++++++++++
 configs/sagem_f at st1704_ram_defconfig |  8 ++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/mips/dts/sagem,f at st1704.dts b/arch/mips/dts/sagem,f at st1704.dts
index be15fe5551..dd0e5b8b7c 100644
--- a/arch/mips/dts/sagem,f at st1704.dts
+++ b/arch/mips/dts/sagem,f at st1704.dts
@@ -44,6 +44,18 @@
 	status = "okay";
 };
 
+&spi {
+	status = "okay";
+
+	spi-flash at 0 {
+		compatible = "spi-flash";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
 &uart0 {
 	u-boot,dm-pre-reloc;
 	status = "okay";
diff --git a/configs/sagem_f at st1704_ram_defconfig b/configs/sagem_f at st1704_ram_defconfig
index cfc56cba37..5c091353e5 100644
--- a/configs/sagem_f at st1704_ram_defconfig
+++ b/configs/sagem_f at st1704_ram_defconfig
@@ -39,3 +39,11 @@ CONFIG_RESET_BCM6345=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_BCM6345_SERIAL=y
+CONFIG_BCM63XX_SPI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_SPI_FLASH_WINBOND=y
-- 
2.11.0